D-Link DIR-825 :: Block Internet Access To All Devices
Aug 22, 2011
I am trying to allow a block of 7 or 8 devices to access the internet all the time. Two other devices I would like to allow internet access during a set time range. Finally I would like to block internet access to all devices not in one of the above groups. I need to use MAC addressing to identify the allowed devices. I was able to do this with my old WRT-54G but the DIR-825 is giving me trouble.My main problem occurs when I try to block access to "Other Machines". When I do that all devices on my network are cut off the internet.
View 5 Replies
ADVERTISEMENT
Mar 24, 2011
I recently went into my router and changed my security settings so that my router is WEP protected. I was having issues with somebody feeding off on my connection and causing problems with my Internet provider. I had changed it to be a secured network before but somehow it became unsecured. So, I set up an admin password and such so nobody else should be able to get into my outer . Anyway, after setting it up to with the WEP, now I cannot access the Internet from any other device except my main PC to which the router is connected.I usually get some sort of error stating that there is "limited on no connectivity" when I try to connect my laptop or Archos Home Tablet device. Yet, is reads that the signal strength is excellent and recognizes my network as existing.
View 7 Replies
View Related
Feb 27, 2013
I was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
View 3 Replies
View Related
May 13, 2011
I have a D-Link DIR-655 with various machines connected via Ethernet and WiFi. Can I disable internet access for selected PCs via the router? I still want them to access the LAN, just not the internet.
View 5 Replies
View Related
Aug 8, 2012
I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
[code]...
View 4 Replies
View Related
Sep 1, 2012
I have a DIR-615 router. I would like to know if it is possible to block a PS3 from accessing the internet completely, without blocking any other computers/devices. I have access to the router, but not to the PS3 itself.
View 3 Replies
View Related
May 21, 2012
I am setting up a network for a friend with children. He has a BT homehub and wants to block their access between certain hours. However by using access control on BT it tells you that you have been blocked which is no good as he cannot feign ignorance and pretend he doesn't know what to do (as his kids will pester him to fix it). He therefore wants to block their access more discreetly (as if the internet was generally timing out or messing up instead of actually displaying they have access control).Is there a way to block an individual's access on the router without blocking everybody either on a timer or manually done each time (thus if there isn't a way of automating it he can at least do this manually each time).
View 1 Replies
View Related
Mar 15, 2011
How do I configure Cisco ASA 5505 (using ASDM 5.2) to block a workstation (IP address) from accessing internet completely? I was trying to set up a new incoming access rule for outside interface to deny any IP traffic to that workstation but it doesn't work from some reason - the workstation can still access the internet. The ASA has no special settings, only a few ports opened for servers?
View 1 Replies
View Related
Sep 25, 2012
i saw on router address that someone is using my wifi and i just want to disconnect him without changing my wifi password
View 1 Replies
View Related
Feb 17, 2013
I've been searching in google on how to block IDM in my router D-Link DIR-655, i need to block this application because we have a large network here in our office, and i found out mostly of our users when i check have a IDM installed in thier pc and its affecting our internet connection.
View 13 Replies
View Related
Dec 26, 2011
I have a DIR-655 with the latest firmware 1.35NA. I also with a wireless connection to a Grace internet radio and a DAP 1522 (with the latest firmware 1.31) set up as a bridge with my direct tv box connected . The DIR-655 ip is 192.168.2.1, Grace radio ip is 192.168.2.177, DAP-1522 ip is 192.168.2.3 and Direct TV box ip is 192.168.2.173. My PC is hardwired to the DIR-655. I can ping all devices from my PC, but cant ping the DAP 1522, Direct TV Box or Grace Internet Radio from my IPAD. I have no trouble connecting to the DIR-655 from my Ipad. It only seems to be anything thats connected wireless to the DIR-655 that I cant access from my IPAD. All devices have the same subnet of 255.255.255.0 and gateway of 192.168.2.1.
View 7 Replies
View Related
Nov 18, 2012
How can I restrict wireless access to specific devices? Ideally, I would like to turn the access off and on to restrict my children's usage when we're not around or when they try to sneak on during the night.
View 5 Replies
View Related
Apr 14, 2011
How can I block my son's computer from internet access through our wireless router without having his computer in hand? I have accessed the router on line but don't know what to change there.
[code]...
View 4 Replies
View Related
Nov 23, 2012
How to block internet access some of the computers in a network
View 2 Replies
View Related
Aug 27, 2011
How to block other persons getting in my internet services
View 3 Replies
View Related
Sep 25, 2012
i want block only internet access from firewall
View 1 Replies
View Related
Aug 10, 2011
I have the Qwest/Actiontec Q1000 modem/router. I go to the ip address using my web-browser and open up advanced configurations -> access scheduler. I select a computer (and it automatically adds the MAC address) and then the days/times I want the internet to be accessible. However, when I click "add" (to add my internet allowance to the scheduler list) it just says 12:00 to 0:00, which is essentially permanently blocking the internet for that computer.
View 7 Replies
View Related
Aug 27, 2012
I have a windows server 2003 ent., with about 6pcs and a couple of macs. I don't want the server to connect to the internet, though every computer only has one network card. I want all the clients to access the internet but not the server. How do I set this up.
View 4 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
Sep 17, 2011
Is it possible to have my file server only accessable in the LAN. I would like to block all inbound/outbound traffic outside of the LAN. I back up all of my personal files to that server and some contain sensitive information.
View 9 Replies
View Related
Mar 12, 2012
E2000 about a years old.One of the rule is to block internet access from 1am to 4am for certain internal IPs.Working fine until a week ago. Once the time kick in, the E2000 will not route any internet access for any internal IP until the unit is power off and power on reboot.If that rule is disabled. then the E2000 will route all days and nights with no problem.Updated firmware to 1.0.0.4 already.I replaced the WRT45 because of the same problem a year ago. Now just about a year, this E2000 keeps blocking all traffic.
View 1 Replies
View Related
Aug 22, 2012
I have a netwokr in which users are getting ip address from DHCP server that is window server.i want to block some users to access interent by using their device mac address.i have these devices in my network...
2921 cisco cme router
cisco 2960 switches
cisco 892 cisco internet router
internet ADSL that cnnected with cisco 892...
wireless AP 1142...
i have no firewall or any asa...how can i block some users for accessing internet but they can access internal network...for file sharing and prinitng,...
View 15 Replies
View Related
May 2, 2011
Noticed several devices have connected through my home network previously. Not sure how it is done,currently these inactive devices are displayed, i would like to know how can i block them from the firewall just in case it is connecting again?
View 3 Replies
View Related
Jan 15, 2011
I have a linksys wrt54g router. i need to block all devices except one from plugging in a wired device into the back of the router. i tried the mac filtering, but i didnt work. Is that for wireless only?I can also block local ips (192.168.1.x), and was going to go that route and only allow my local computer but i was afraid if i restarted my router or computer the ip would change and i would be locked out.
View 2 Replies
View Related
Feb 23, 2012
I've came across IP address that aren't enough for some users in the company. The IP addresses are more than enough to cater to the user's notebook or PC. However, some users does not know that there are actually limits to the IP we have, so quite a number of them actually uses their mobile / pads to tap the company's wireless.
I was wondering if i could restrict that particular user from tapping onto the network. I know it sounds a bit impossible because DHCP doesnt have that smart function to block whoever we sees deemed as a "nuisance".
View 29 Replies
View Related
Dec 1, 2012
Setup firewall rules that will block all inbound Internet access to the web server except port 443, Setup firewall rules that will block all communication between the two internal networks, except ports 7000 and 1702
View 1 Replies
View Related
Sep 1, 2011
i want to block all internet access on all my computers from the time range of 9 PM to 8 PM. Yes, that gives 1 hour of internet access per day. However, it seems that there are certain rules of the router that won't let me do this. It seems I can't make 2 different policies for PC's within the same IP range (192.168.1.0 to 192.168.1.254) , it gives me the error: "The values you entered are invalid. Please try again."every time I try to do so. And when I try to give the time range from 9 PM to 8 PM it gives an error stating that the end time must be bigger than start time. I am using the WRT54GL with firmware v4.30.7.
View 5 Replies
View Related
Nov 20, 2011
On E4200 Firmware Version: 1.0.03, I managed to successfully set up "Internet Access Policy" (not the "Parental Controls") to set up the times when internet access is disabled for various IPs on my network.
But I could't setup a policy to block facebook.com. What I am doing wrong? See the attached screen shot. I did click the "Edit List" and apply this polity to the IP Address Range 192.168.1.2 to 192.168.1.254.
View 9 Replies
View Related
Oct 3, 2011
We have an RVS-4000 router that we use as an Internet gateway on our school network. I am trying to set up an Internet Access Policy to block some specific websites by URL using a domain name. I set up the policy, and added a PC to the list using the mac address, and the blocking did not work. I went back to the list and added the IP address of the same PC, the policy still did not work to block the domain. I rebooted the router, cleared the Internet Temporary files and history on the PC, and the policy still does not work. It acts like it is going to block access to the website because it takes a long time, but it will eventually connect.
View 7 Replies
View Related
Aug 3, 2012
I have a Cisco C3560CG which is running C3560c405ex-UNIVERSALK9-M), Version 12.2(55)EX2.The switch has vlan 1 and vlan 50 configured, vlan 50 should have access to a limited number of host in vlan 1.The following acl has been applied on the inbound to vlan 50:
10 permit tcp 10.16.30.0 0.0.0.255 host 192.168.15.243 eq 137 138 139 445
20 permit udp 10.16.30.0 0.0.0.255 host 192.168.15.243 eq netbios-ns netbios-dgm netbios-ss 445
25 permit icmp 10.16.30.0 0.0.0.255 host 192.168.1.243
26 permit ip 10.16.30.0 0.0.0.255 host 10.16.30.254
30 permit ip 10.16.30.0 0.0.0.255 host 192.168.15.254
[code]....
I sure the above would work, but for some reason some of the packet counter are not incrementing but the traffic is being blocked. But I would like to see the counter increment.Also I have that I may beed to use VACL wouls this be the case?
View 26 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Oct 2, 2011
Why does my E1200 forget my Parental Control Password? This happens almost weekly and I have to use the "forgot password" option. It asks my security question, I answer it and set the new password to the same password it keeps forgetting. Why does this happen? Also, is there anyway to have total 24hr control on the Block Internet Access?
View 4 Replies
View Related
Dec 12, 2012
I can make some "local policy" with client of SSL VPN AnyConnect and block access to internet?
The user would only have access to the internet if he was connected to the VPN (by internal proxy).
View 10 Replies
View Related