D-Link DIR-655 :: Save Configuration Of Router Before Updating To A New Firmware?
Jun 29, 2011
For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies
ADVERTISEMENT
May 9, 2011
a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
View 8 Replies
View Related
Nov 29, 2011
I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies
View Related
Jun 19, 2011
i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies
View Related
Dec 30, 2010
I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
View 9 Replies
View Related
May 21, 2011
How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies
View Related
Aug 9, 2012
i have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies
View Related
Dec 3, 2011
I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
View 2 Replies
View Related
Oct 21, 2011
My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies
View Related
May 3, 2011
Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies
View Related
Mar 27, 2012
I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies
View Related
Feb 28, 2013
When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
View 9 Replies
View Related
Jul 3, 2012
I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies
View Related
Dec 6, 2011
i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware.
View 6 Replies
View Related
Jul 7, 2011
How do I save/copy all of the router configuration entries onto a memory/flash usb drive? I did not configure the router myself (out of town when purchased). I have already downloaded the manual for that router and I want to understand exactly what she (person who configured router) did and identify any mistakes she might have made. Once downloaded, I assume I can print out all configuration settings.
View 3 Replies
View Related
Sep 5, 2011
will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies
View Related
Apr 4, 2011
Just bought three D-Links from abroad ( Canada) and now am in Mauritius. They are brand new and now going to set them up.
1) DIR-825 H/W : B1 F/W : 2.02NA
2) DNS-323 H/W : C1 F/W : 1.09
3) DWA-140 H/w : B2 F/H : 1.50
I already own a Beetel 220BX2 modem. I will be connecting :
1) my PC through the DWA-140
2) three Samsung Galaxy S
3) One LG phone (b/g)
4) Network Player (Yet to be bought)
5) Laptop
What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.
View 14 Replies
View Related
Mar 26, 2012
I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies
View Related
Oct 20, 2012
what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
View 1 Replies
View Related
Jul 20, 2011
why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page.
View 3 Replies
View Related
Aug 11, 2012
I've been lagging really bad when my sister uses the laptop upstairs with wireless connection. Just 1 computer makes me have up to 100 ping, imagine 3. How can configure my settings so that i will stop lagging or configure so that i have priority.I have a Dlink 655 Version A4 with the latest firmware 1.35
View 9 Replies
View Related
Aug 30, 2011
I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.
View 11 Replies
View Related
Aug 2, 2012
I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
View 1 Replies
View Related
Sep 5, 2011
I just updated my RV042 to the firmware RV0XX-v4.0.4.02-tm-20110704-code.bin and now im having this error every time that i try to logon in the router? 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
View 7 Replies
View Related
Apr 13, 2012
I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies
View Related
Feb 5, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 120905 Rel.73281n
I have successfully connected to my ISP with the 3G USB dongle.But it seems like the PIN code is not saved. I have to enter it after a reboot of the router.
View 2 Replies
View Related
Apr 17, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_130217
Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?
View 3 Replies
View Related
Dec 13, 2011
I have a 3845 that I am trying to configure but it won't save. It doesn't matter what i do (write mem, copy run start). No matter what, if I reload it, it wipes the config. Am I missing something, or is it just a bad memory? I don't get any errors when I save, it looks like it takes, but no dice.
View 2 Replies
View Related
Feb 13, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
After setting up the newly arrived router, renaming the SSID and changing password for 2.4 GHZ AND 5 GHZ and also renaming the default router username and password, I decided to update the firmware.The procedure wiped all configuration I've made forcing me to do all over again.
View 3 Replies
View Related
Oct 23, 2011
I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.. then what i do is a copy start run to get the configuration active..
View 2 Replies
View Related
Jun 22, 2011
There are some troubles in my 7206 vxr . The process of this problem below.
LOG:
Self decompressing the image : ####################################################################################################################################################################################################################################################################################################################################################################
[Code]...
View 2 Replies
View Related
Jun 1, 2013
The N7K can't save the configuration to start-up, here is the error message, the box is running 5.0.5, is it a software bug ?
View 1 Replies
View Related
Feb 25, 2013
I'm trying to save a configuration file on my 2960-48PST to a FTP server.
Unfortunately it doesn't work. What different steps I should follow ?
The software version is 12.2(50)SE5.
View 2 Replies
View Related
