(my connection is a wired cable/DSL modem btw, using a second temp connection to troubleshoot)Last night, my connection was all fine and dandy until I got up this morning. Instead of having access to it and it being set as a home network, it was set to unidentified and public and I now have no internet access on the network. I can't change the network type either, it's stuck as public.[CODE]
View 1 Replieshow to change network type in win 7
View 4 Replies View RelatedI have all the PS3 and Activision ports. What numbers go where in the router's port forwarding screen. My ISP says that the PortStart and Base Host Port should be the same numbers and the PortEnd should be the number at the end of the range (10070-10080 for ps3). I'm going with that for the PS3 TCP numbers, but don't know which numbers to put in for the PS3 UDP or the Activision TCP and UDP.
View 8 Replies View Relatedcan i change my nat type from type 3 to type 1
View 19 Replies View Relatedhave listed all ports udp and tcp i have disabled UPnP i have changed mtu to 1364 and tried 1365. i have rebooted both router and modem. still no success. Cant seem to change nat type 3 to nat type 2. i am use a WRT120n wireless router
View 1 Replies View Relatedchanging my nat type to open i have tryed so many solutions and none of them worked?
View 9 Replies View RelatedI dont know or understand how to change my nat type. I have the e3000 linksys router. My ps3 is running wireless off it. I want to change form nat 3 to 2
View 1 Replies View RelatedChanging the NAT Type to open because I can't play with some of my friends on Playstation.
View 1 Replies View Relatedhow to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.
View 9 Replies View RelatedI have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies View RelatedChanging the NAT Type 3 to NAT Yupe 2 or 1 because I can't play with some of my friends on Playstation3
my router is: Cisco E4200
Recently Ive been having issues with connecting to games on my PS3, Ive been trying to do things like Port Forwarding like I did on my old router but the way this router is set up is extremely different. On this router it seems there is no Port Forwarding it's now Port Triggering and it seems to require more info than Forwarding does.I should mention Im using a Router from Centurylink and I have no Admin powers, I can still go in and do things with ports but how I would change my NAT type or Port Trigger
View 1 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet
View 4 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. it down so I can understand what you're saying.
View 2 Replies View RelatedSo currently I'm having issues with changing my nat type to open for my ps3. I've tried to use DMZ and port forwarding to change the nat type, but sadly I couldn't get this to work. Most the guides on the forums are for xbox's which wouldn't work for a ps3. Any handy guide to change my nat type to open for my ps3?
View 5 Replies View RelatedI am switching a switch connecting to the ASA5550 tomorrow. My current switch is using fiber connecting to the ASA. The new one only support copper. If I switch between fiber to copper on the ASA (change media-type command on interface) will it cause a down time? I have VPN tunnel on the ASA and don't want the session to reset.
View 2 Replies View RelatedHow to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View RelatedI have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?
View 1 Replies View RelatedMy Sasung led smart tv does not have a wireless network option in the settings
View 1 Replies View RelatedWe are implementing fault management tool and for that we need information such as what type of traps are being triggered by router on what events..currently we have BGP, interface,reachability,h/w,syslog,authfail,config, trap types configured..All these are hitting in our fm tool but I need to know when these traps are being triggered by router.more importantly authfail, config, syslog, bgp.
View 4 Replies View RelatedLooking to set up a wireless printer (HP Deskjet 3050 All-in-One Printer - J610a) for use by another computer on the network; at present the printer is wirelessly connected to the router (Linksys e1000) and the software is installed on one computer (Win 7). The router recognizes a Network printer but no details about type.
The printer works correctly with the Win 7 machine but can't be found by the other machine (Win xp). Could it possibly be that I need to install the same software on the Win xp computer in order for it to be connected? Just guessing here as that was the case with another printer I networked but it was a Canon brand.
I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text: Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.
I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedSimply put, a wireless network was set up with a network name and password in a senior community of primarily beginner users. Recently the name and password became changed to that of a community member named, let's say, "Joe". After addressing the router several times to change things back - only to find that the network name reverted to Joe - I changed the router password from admin to a unique pw and I confirmed that Remote Management was off. Next day... it was Joe again
View 3 Replies View RelatedHow do I change the name of my network to something which makes sense? I can get into 192.168.1.1, but then what?
View 4 Replies View Relatedhow to change the network
View 1 Replies View RelatedIf I change a computer name on a Microsoft network, what are the repercussions?
View 1 Replies View RelatedQwest was taken over by CenturyLink. I need to change my network security key. How do I do this?
View 1 Replies View RelatedI have installed a new router. My HP dv7 will not connect via wlan because the security key will not change. I entered the new key, but it defaults back to the old key when I try to connect
View 2 Replies View Relatedhow can i change network security key
View 1 Replies View RelatedI have 2 computers running Windows 7. Recently I changed from a Motorola 3347 modem to a Actiontec Q1000 modem. After changing modems I am unable to network the computers, I get error "0x800070035 The Network path was not found".I can plug the old modem in and the networking will work.I have tried to duplicate all of the settings on the Q1000 modem from the Motorola, however there are some different options/settings that do not overlap.
View 4 Replies View RelatedI'm trying to connect an Xbox 360 to my University's wireless network using a bridged connection between the wireless adapter and the LAN adapter. I can connect to the internet on the Xbox, but not Xbox LIVE. I get an error message stating that my MTU setting must be 1364 or higher. I obviously cannot access the router settings because they are the schools routers and I do not have administrative privileges. So, Is there some other way to modify MTU settings without that access?
View 3 Replies View RelatedI recently mapped my media player's internal hd to my Win 7 system. I'd like to change the drive letter I assigned to something else but I can't find how to do it.
View 2 Replies View Related