HP Deskjet 3050 - Router Recognizes Network Printer But No Details About Type?
Jul 30, 2011
Looking to set up a wireless printer (HP Deskjet 3050 All-in-One Printer - J610a) for use by another computer on the network; at present the printer is wirelessly connected to the router (Linksys e1000) and the software is installed on one computer (Win 7). The router recognizes a Network printer but no details about type.
The printer works correctly with the Win 7 machine but can't be found by the other machine (Win xp). Could it possibly be that I need to install the same software on the Win xp computer in order for it to be connected? Just guessing here as that was the case with another printer I networked but it was a Canon brand.
View 4 Replies
ADVERTISEMENT
Jan 19, 2011
We have an HP DeskJet 3050 wireless printer connected by WiFi to two laptops. One laptop, a Dell 700m, runs XP Pro with all updates applied. The other laptop, a Dell XPS 15, runs Windows 7 64-bit, again with all updates applied.The printer works completely reliably from the XP machine. From the XPS 15, the printer works reliably for a day or so, then the icon in Devices & Printers is grayed, indicating the printer is offline. Even in this condition, I can access the printer's built-in web server using Firefox on the XPS 15 and the connection appears to be fine. The printer's IP address has not changed. But the printer is still reported as offline for printing by Windows.
The workaround is to delete the device and reinstall it using Add Printer and Have Disk, but using the already installed drivers rather than re-installing. After doing that, the printer then works for a few days before again going offline.This problem is extremely irritating. I've done Google searches on this problem. Although I've found a variety of similar reports for various brands of wireless printers on Vista or Windows 7, I've not seen a solution. My latest attempt is to share the printer on the Dell 700m and print to the shared printer from the XPS 15. We'll see if that continues to work for a few days (I suspect it will). But this isn't really a solution and not always convenient.
View 3 Replies
View Related
Jan 28, 2011
I've set up my HP on a network with two laptop pc's. The second PC works great but the first PC will not let me print a document from a program. I get an "unable to communicate with Printer" Error. However, I can scan to both computers and the first computer can print a diagnostic page.
View 2 Replies
View Related
May 12, 2011
I have a HP 3050 Deskjet printer that I can not get to print from my laptop wirelesslyIy was originally set up by myself and worked on three pc's but I had to have BT assistance with my router. I think since reset from them it has lost all settings. Is it easier to uninstall from each pc and reload, my main concern is that it can not even be seen as a network device
View 1 Replies
View Related
Feb 7, 2011
how to connect my MSI Laptop with bluetooth and wifi to the Hp 3050 wireless printer?
View 1 Replies
View Related
Jun 27, 2012
I have an HP deskjet f4580 printer which i am trying to connect wirelessly and print from my laptop. virgin recently installed a new hub/router and now i cannot seem to print wirelessly. i have just removed and reinstalled printer but can only print via usb?
View 1 Replies
View Related
Jun 27, 2012
I have an HP deskjet f4580 printer which i am trying to connect wirelessly and print from my laptop. virgin recently installed a new hub/router and now i cannot seem to print wirelessly. i have just removed and reinstalled printer but can only print via usb
View 1 Replies
View Related
Feb 17, 2013
I cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
View 1 Replies
View Related
May 13, 2011
I have window 7 64 bit with amd phenom 840 and msi 880 gm series. I installled d link dwa 525 wireless pci card. Window recognises it but cannot create a network or cannot connect to other network.
View 4 Replies
View Related
Nov 26, 2012
Region : Colombia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : CLARO
Does not find Modem. Just purchased it in Cartagena, Colombia to use with ISP Claro.Using Modem ZTE model MF 190
View 10 Replies
View Related
Feb 10, 2011
My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.
I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.
View 6 Replies
View Related
Dec 7, 2012
Region : Brazil
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : TIM
The TL-MR3420 recognizes my modem (Olivetti Olicard 160), but it does not connect to the 3G network. I tested the modem on my PC and it connects fine. The PIN verification is deactivated and the Modem configuration is the same as I use on the PC, however it just keeps trying to connect without success. I updated the firmware to the latest version.
View 2 Replies
View Related
Feb 23, 2013
I've a Dell VOSTRO 1710. When I use an ethernet connection with my router, there is no problem. But when I try to have a wireless connection, all the wireless network of mine and of my neighbors are recognized, my WPA password too. Vista (32 bits) says I am connected but, when I try to reach a page on the web, get my e-mails or even ping an IP, I get no response. Note that I have other devices connected to that router which works without problem. I thought it was the driver of my Wifi card (Intel 4965agn) that does not work. Thus, I try to update (and even downgrade) them from Intel® Wireless WiFi Link 4965AGN - Download Center. Nevertheless, it does not work. Note that it worked one week ago. The problem has suddenly appeared.
View 1 Replies
View Related
Dec 11, 2012
Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
View 2 Replies
View Related
Mar 27, 2011
Iam joining sky in the coming week and will be receiving their free router (G Router). I am currently using (Belkin N Router) due to the distance from my computers and interferance (eg , walls, 4 floors).
I understand that I cannot use my own router with sky because they have username & password built into router. I have heard rumours that these details can be extracted.
WHY ON EARTH DO SKY ONLY SUPPLY G ROUTERS
View 2 Replies
View Related
Nov 28, 2012
I have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?
View 1 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Oct 2, 2012
I'm trying to print from the desktop to a HP deskjet 6940 and when I do, I get the message, "Print to File" I copied a file earlier from one folder to another from the desktop. Would that cause the problem?
View 1 Replies
View Related
Oct 30, 2012
I have HP Deskjet 1280 which worked perfectly on my 32bit PCs, under XP and Vista. I updated both PCs to Windows 7, and have also a 64bit Desktop and a 64bit Laptop with Windows 7original .I tried to updte the driver using the driver update , but the HP Deskjet 1280 is not listed. The four PCs are networked with Network Magic.
View 1 Replies
View Related
Jul 23, 2012
(my connection is a wired cable/DSL modem btw, using a second temp connection to troubleshoot)Last night, my connection was all fine and dandy until I got up this morning. Instead of having access to it and it being set as a home network, it was set to unidentified and public and I now have no internet access on the network. I can't change the network type either, it's stuck as public.[CODE]
View 1 Replies
View Related
Nov 2, 2012
how to change network type in win 7
View 4 Replies
View Related
Aug 28, 2012
My wireless recognizes my home networks, but bounces consistently from "acquiring network" to "automatic" and never connects me to the web. Just to test it out, I installed the Belkin WiFi USB Adapter to run it as a separate wireless, and it reacts the same way.
View 4 Replies
View Related
Feb 2, 2013
My Sasung led smart tv does not have a wireless network option in the settings
View 1 Replies
View Related
Feb 25, 2013
I live in a dorm where internet is provided through a router that is pretty much encased in a metallic box on the side of the wall. At the beginning of the year, my parents bought me an extremely long ethernet cable ( about 15 feet I'm guessing). I have been using this ethernet cord with no problems up until now. I find it difficult to maintain the long cord as it gets tangled everywhere and I switch it between my laptop and my xbox (I can't get a switch to work). After prolonged switching between the xbox and the laptop the little tab thing that you push broke off and the cable starts to slide and disconnects me from the internet. I decided to get another ethernet cable and I tried connecting it but my laptop does not detect the cable and I do not see any lights turn on like my other ethernet.
View 1 Replies
View Related
Nov 30, 2011
I have a Laptop running Win7 via a router and a desktop running XP with a canon printer connected to it. The desktop is hardwired into the router and the laptop is wireless. Im using Panda Internet Security 2012, Windows Firewall and Defender.If I want to print something from my Laptop, Im able to by having the Desktop PC and printer turned on and have the Windows Firewall enabled and the Panda Firewall disabled on both machines. If I have the Panda Firewall enabled on both PCs and the Windows Firewall disabled, then the printer will not print from the laptop.I have read that the Windows firewall will automatically adjust settings for the 2 PCs, but I would prefer to use the Panda Firewall.
View 1 Replies
View Related
Feb 11, 2012
I have suddenly started having issues recognising and connecting to a wireless network at home on my laptop. We have 2 wireless networks at home as we use an additional D-Link router through the powerlines. (DHP-W307AV PowerLine Homeplug AV Wireless N Starter Kit)I used to be able to connect to both but now I can just connect to the main wireless router. Other laptops and smart phones in the house can connect to both. I was wondering if this had anything to do with Norton 360 so I have used their removal tool to get rid of it. Unfortunately I still can't connect to the second network.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6087 Mb
Graphics Card: Intel(R) HD Graphics Family, -1276 Mb
Hard Drives: C: Total - 670401 MB, Free - 455832 MB; D: Total - 29691 MB, Free - 27474 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: avast! Antivirus, Updated and Enabled
View 10 Replies
View Related
Dec 7, 2012
We are implementing fault management tool and for that we need information such as what type of traps are being triggered by router on what events..currently we have BGP, interface,reachability,h/w,syslog,authfail,config, trap types configured..All these are hitting in our fm tool but I need to know when these traps are being triggered by router.more importantly authfail, config, syslog, bgp.
View 4 Replies
View Related
Apr 11, 2011
I have a Dell Studio 1555 and normally my wireless connection works perfectly. It runs on Vista and I bought it in August 2009. Just recently I went to a friends house, and my wireless detected their router, but where normally it shows connection signal bars, it showed a red 'X' and wouldn't allow me to connect. It wasn't their router because their wireless on their computers were connecting to it fine. Then I went back to my house, my wireless was working fine, and connected automatically right away. The next weekend I went to my parents' house, where I have brought my computer and was able to connect to their wireless countless times in the past, did the same exact thing as when I was at my friends' house. Normally it will detect their router by their name because that is what they have it set at, but now it can only detect it as linksys. And it will not connect. I have no idea what to do because as soon as I go back to my house, my computer is able to connect to my wireless
View 3 Replies
View Related
Apr 29, 2011
My HP printer finds my network, signs on just fine, has internet. My 2 wired PCs are connected and have internet. My 2 wireless laptops find the network and have internet. Everything has internet successfully thru the router....not one of them can print anything because not one of them can see the printer that I know is there.
View 3 Replies
View Related
Jul 22, 2012
I'm trying to connect my printer to my wireless network via my new Netgear Gateway 7550. The printer will not accept the Wireless Network Key for the router.Had no problem with the old 2Wire gateway.
View 1 Replies
View Related
Apr 15, 2013
I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text: Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.
View 1 Replies
View Related
Mar 7, 2013
I have a cabled network printer, Xerox Phaser 6125n, that have always worked properly from my 3 desktop computers and my laptop.A few days ago, my old dlink router went dead, and I replaced it with the TP-Link WDR4300 router. Everything worked as usual afterwards, until I found out I could no longer print on my printer. I can access the printers web interface through the ip adress, change settings and such through the browser, but the printer has offline status in windows and print jobs never leaves the print queue in windows. I tried deleting the printer in windows (tried both windows 7 and 8) to reinstall it.
View 7 Replies
View Related
Mar 30, 2011
I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies
View Related
