I have an HP deskjet f4580 printer which i am trying to connect wirelessly and print from my laptop. virgin recently installed a new hub/router and now i cannot seem to print wirelessly. i have just removed and reinstalled printer but can only print via usb
View 1 Replies
I have an HP deskjet f4580 printer which i am trying to connect wirelessly and print from my laptop. virgin recently installed a new hub/router and now i cannot seem to print wirelessly. i have just removed and reinstalled printer but can only print via usb?
View 1 Replies View RelatedI switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies View RelatedWe have an HP DeskJet 3050 wireless printer connected by WiFi to two laptops. One laptop, a Dell 700m, runs XP Pro with all updates applied. The other laptop, a Dell XPS 15, runs Windows 7 64-bit, again with all updates applied.The printer works completely reliably from the XP machine. From the XPS 15, the printer works reliably for a day or so, then the icon in Devices & Printers is grayed, indicating the printer is offline. Even in this condition, I can access the printer's built-in web server using Firefox on the XPS 15 and the connection appears to be fine. The printer's IP address has not changed. But the printer is still reported as offline for printing by Windows.
The workaround is to delete the device and reinstall it using Add Printer and Have Disk, but using the already installed drivers rather than re-installing. After doing that, the printer then works for a few days before again going offline.This problem is extremely irritating. I've done Google searches on this problem. Although I've found a variety of similar reports for various brands of wireless printers on Vista or Windows 7, I've not seen a solution. My latest attempt is to share the printer on the Dell 700m and print to the shared printer from the XPS 15. We'll see if that continues to work for a few days (I suspect it will). But this isn't really a solution and not always convenient.
I purchased this router, and in reading reviews several people complained how bright the blue "dome light" is. They also pointed out that in the manual there is a way to turn it off. I would like to turn it off, and I have read the manual virtually "cover to cover" (I am after all reading it on my computer), but I did not find any information about this.
View 4 Replies View RelatedThe internet connection light is blue, i am assuming this means the device thinks that it is connected. However wired or wireless I can't hit any web pages. When I use the internal tools neither can the device ping any address.
I am using:
Firmware 2.00NA
DSL modem ATT-Yahoo-SBC (Speedstream 4100 using DHCP)
I am planning to upgrade the firmware to 2.01NA and give that a shot.
I have a HP Pavillon dv6000 laptop, tried connecting to my wireless network this morning but no luck. It will connect fine when using Ethernet cable. Whether the switch is pushed to on or off the light stays orange, when it is connected it used to turn blue. I've included a prtscrn of my device manager...
View 3 Replies View RelatedMy internet light flashes at times yellow.Some times i lose internet connection .I have never had this problem with my linksys router.
View 3 Replies View Relatedi have here Cisco 877 model, when i turn it on the CD light keep flashing,there is no connection to connect to router to configure it,i tried to connect with Consol, and UTP but no vail,i clicked the RESET button btw the consol and ADSL button unfortunatly no vail,
View 1 Replies View RelatedI cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
View 1 Replies View RelatedI just purchased a new E4200 to speed up my network and all seems to be fine with the exception of the Cisco light flashing rapidly which indicates a problem.
View 5 Replies View RelatedSo, I messed around with my router a little too much and just want to restore it back to the original firmware now. I have a WRT54GS v7 Linksys router and tried to follow this guide to flash the firmware to something a little more useful. After step 7 of that guide, I can't ping my router, can't access the GUI, and have no idea what my router's IP is. If I assign each computer plugged into the router an IP like 192.168.1.2 I can ping them, so the router is still functioning somewhat. I'm plugged into my modem right now to get on the Internet.
Right now, my power light is off, my DMZ light is off, my WLAN light is off, but the other lights turn on if I plug a cord into its port (plug a computer into port 1, port 1's light comes on). When I do an ipconfig /all i get this. I doubt the web interface still works, but if I could at least get the router's IP, couldn't I use tftp and put the firmware on that way?
I have a 1921 router with a V.2 T1 wic installed connected to a MPLS circuit. The circuit is down hard and the CD light is flashing. We reseated the WIC card and the circuit recovered for about 30 seconds, then went down and CD began flashing again on the WIC. AL is solid.
View 1 Replies View RelatedI've set up my HP on a network with two laptop pc's. The second PC works great but the first PC will not let me print a document from a program. I get an "unable to communicate with Printer" Error. However, I can scan to both computers and the first computer can print a diagnostic page.
View 2 Replies View RelatedLooking to set up a wireless printer (HP Deskjet 3050 All-in-One Printer - J610a) for use by another computer on the network; at present the printer is wirelessly connected to the router (Linksys e1000) and the software is installed on one computer (Win 7). The router recognizes a Network printer but no details about type.
The printer works correctly with the Win 7 machine but can't be found by the other machine (Win xp). Could it possibly be that I need to install the same software on the Win xp computer in order for it to be connected? Just guessing here as that was the case with another printer I networked but it was a Canon brand.
I have a new TEW-692GR router attached to an UBEE DVM3203B cable modem. For the last several days the WAN light on the router and the LINK light on the cable modem flash on a continual basis. This seemed to happen after establishing a wireless connection between a new LG smart tv and the router but am not sure if that in fact caused the issue. I have power cycled all devices on my network in an attempt to clear this up but no joy.
View 2 Replies View RelatedReset button pushed in, unplugged won't reset it. I get my default name on connections but it's not showing as available connection.
View 7 Replies View RelatedI changed the setting from static to dynamic and the switch froze up. all lights on the panel flashed, when they stopped the system light on the left side continued to flash. I tryied unplugging unit as well as depressing the reset for longer than 30 seconds. Unit still the same.
View 8 Replies View RelatedI am having a problem with my ea4500 several times a day the cisco light flashes and I loose internet connectivity. I have tried resetting the router by the reset button and changed ssid name, making two different one for each band, and still I am having a problem. I have read where it could be a firmware update, I have updated (using current version)
View 6 Replies View RelatedI recently purchased the Linksys Wireless N Home WAG120N and I've hooked it up correctly but I can't seem to establish a connection with the DSL light. I've tried hooking it up to different ends in my house with no improved results, however, my older modem works fine.
View 1 Replies View RelatedMy N600 router has a flashing orange light on it. What's going on with this thing?
View 4 Replies View RelatedWe just moved into a new place a couple days ago and the cable guy (from Cox) came and hooked everything up. The cable works but I plugged in my n300 belkin wireless router and it'll have a blue ligh for a couple second then flash and then turn to flashing amber/orange. It won't connect to the Internet. I tried resetting it, unplugging from both ends and nothing will work.
View 2 Replies View RelatedWe have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
i have Linksys WRT610N V2 now i got problem the power light flashing still keep cannot use but wifi and wan and lan no light but 1 light power only still keep power flashing blinking no stable now i using adsl modem direct connected i using linksys am300 adsl modem
View 1 Replies View RelatedI have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.I did a factory reset and it was ok ... past 3 days the problem has happened again.I changed the ap with a new but the situation remained.I tested the wiring and everything is ok.the switch port is set up correctly.
View 11 Replies View RelatedSo I just got this new WRT160Nv2 router. I have (1) wired computer and then my laptop running wireless to it. For the first couple days I had some issues getting consistant internet but after reading some stuff on here I downgraded to the version 8 hardware and it worked GREAT for about 3 days. Now my power light won't stop flashing and I have NO internet connection at all through the router. I have tried to reset the router by holding down the button and also unpluging it but still nothing.
View 9 Replies View RelatedIs it normal for the "CISCO" icon/light to "fast flashing" periodically - not to be confused with the "slow flashing" that the E4200V2 displays when being "power cycled"?
View 1 Replies View RelatedEverything was working fine. Changed Nothing on the router. Goes out and now wont broadcast a wireless signal, cant manually reset the router, or get into the settings with 192.168.1.1
Currently I am wired through it with my desktop and its working, but not much else.
Printer (Brother DPC-150) used to work with Belkin router. After a power cut printer works and router seems to work - on their own. But when I plug printer into USB slot on Belkin the little green light does not come on.
View 1 Replies View RelatedI have just upgraded my Linksys router from an older one to the E-2500 about a week ago. Everything is working great on my wired desktop and 3 wireless laptops except the printer will no longer work from any of the computers. I've checked the printer wireless settings and they are correct (ssid and password) and it says it's connected to the wlan. Each of the computers shows the printer is active and set to default BUT the port light on the back of the new router is not on. I have changed cables and still no light, the printer is set up for sharing and it did work a couple days ago but port light was on then.
I have not added anything that wasn't hooked up on my old router, I"m just trying to get what I had on the old router to work on the new one. Everytime I call support, they have me change something that messes up what a previous agent had me do. Now they want me to pay for a direct connection so they can upgrade my router firmware...they didn't even ask what version I already had which happen to be the same version that is available on [URL] so if I had agreed, I would have paid for nothing. I had already paid $29.99 for additional 14 day support on my old router only to find out I needed a new one.
I've been using Linksys routers for quite awhile but I'm just about ready to change brands. I would really like to give this E-2500 a chance.
I'm trying to print from the desktop to a HP deskjet 6940 and when I do, I get the message, "Print to File" I copied a file earlier from one folder to another from the desktop. Would that cause the problem?
View 1 Replies View RelatedI have HP Deskjet 1280 which worked perfectly on my 32bit PCs, under XP and Vista. I updated both PCs to Windows 7, and have also a 64bit Desktop and a 64bit Laptop with Windows 7original .I tried to updte the driver using the driver update , but the HP Deskjet 1280 is not listed. The four PCs are networked with Network Magic.
View 1 Replies View RelatedI previously asked if I should be concerned that the Internet light on my Linksys E3000 router doesn't light up when I have Internet access. Well recently I had to do a reset and I noticed that during the reset it does in fact light up, but it doesn't come on when the router is done with the reset!
View 1 Replies View Related
