Belkin Routers :: Play N600 - Flashing Orange Light
Oct 11, 2012My N600 router has a flashing orange light on it. What's going on with this thing?
View 4 Replies
ADVERTISEMENT
Wireless :: Orange Light Flashing On Dell Printer
Feb 22, 2011I switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies View RelatedRouters / Switches :: Belkin Wireless N300 Has Orange Light
Feb 12, 2012Belkin wireless n300 router has an orange light. All of the cables are plugged in and have tried ipconfig?
View 1 Replies View RelatedBelkin Routers :: Connecting To Two Networks With Play Max N600 HD
Jun 2, 2013Play Max N600 HD (F7D4301) Dual network operation - on behind Belkins firewall. I have just changed the structure of my network for reasons of additional services being added. I now have in the front room the ADSL modem connected to a switch and 2 PC's. The switch is also pbugged into an ethernet plug in the wall which feeds to the other end of the house where the Belkin router is. I have all devices working on the internet correctly. The issue is getting access between the two networks and the devices on the two networks. I have added the ip addresses of the PC's to the router's LAN/Static Route, but that didn't work. The network in front room (after ADSL Modem is 192.168.1.x and after Belkin router it is 192.168.2.x. Is there a way I can allow access between the two networks between devices?
View 2 Replies View RelatedCisco Wireless :: 1130 Showing Status Light Flashing Orange
May 7, 2012I have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.I did a factory reset and it was ok ... past 3 days the problem has happened again.I changed the ap with a new but the situation remained.I tested the wiring and everything is ok.the switch port is set up correctly.
View 11 Replies View RelatedBelkin Routers :: Flashing Amber Light On N300 Router?
Nov 25, 2012We just moved into a new place a couple days ago and the cable guy (from Cox) came and hooked everything up. The cable works but I plugged in my n300 belkin wireless router and it'll have a blue ligh for a couple second then flash and then turn to flashing amber/orange. It won't connect to the Internet. I tried resetting it, unplugging from both ends and nothing will work.
View 2 Replies View RelatedBelkin Routers :: Play N600 - No Computer Can Auto-connect To It?
Mar 24, 2013Just installed N600 Play router. All computers and phone connect fine, but computers won't auto connect after reboot or sleep. With old router this worked fine.
View 4 Replies View RelatedBelkin Routers :: Can't Connect Wirelessly To Play N600 F7D8302
Feb 21, 2013I just bought a Play N600 F7D8302. I swapped out my old Belkin router for this one. Easy swap. I went in to the 192.168.2.1 address, to look at the current wireless settings. I saw an option to use it as an access point. Not sure what I was thinking when I checked it off, but now I can't connect wirelessly, and I cant get onto the settings page again, via 192.168.2.1. My IP address has changed, and is now 50.135.82.220. I've unhooked everything and hooked it back up. I pushed the reset button on the back. I don't know what to do. How do I get it back to the way it was before I got my hands on it?
View 2 Replies View RelatedBelkin Routers :: F5D8236 Modem Light Flashes Orange No Internet After Set Up New Laptop
May 22, 2013Belkin n wireless router model number F5D8236 v1! my modem is showing an internet connection but my router "modem" light is flashing orange and my internet light doesn't even come on. we are not sure but we believe this became a problem last night after my daughter connected her new lap top to the wireless connection.
View 1 Replies View RelatedBelkin Routers :: Play Max N600 HD F7D4401 Dual-Band Signal Very Weak?
Jun 12, 2013belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies View RelatedBelkin Routers :: N600 Showing Solid Red Light
Dec 5, 2012I was having problems connecting to one of my usb devices that was plugged into my router. I unplugged the router to reset it and whenever it starts up it flashes green and the green light goes solid for less then a minute before turning red. It's a solid red light. I've tried unplugging everything and restarting it and nothing. Ironically it still lets me connect to the internet but when I access the control panel on my computer it shows as disconnected. Is this means my router is busted. This is my second Belkin Router and the only reason I had to replace the last one is because it was a G+Mimi router and I upgraded to an N Router.
View 3 Replies View RelatedBelkin Routers :: No Wifi Protected Setup (wps) Light And Button On N600 Db
Dec 1, 2012On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View RelatedBelkin Play N600 Exposing USB Hard Drive Attached To Router Within Sub-network
Aug 30, 2012I recently purchased the Belkin PLAY N600 router to create a private network for my home theatre setup.I have a primary home network 192.168.0.x (NetGear) which I use for all my computing needs. I extended a network cable to my Home theatre area and plugged in the N600 router. After this, I attached a USB external hard drive to the router and it works great. I can see it from the 192.168.2.x home theatre network (Belkin).I would like to expose the USB hard drive hooked to the Belkin Router to my primary network so that I can copy over my music and pictures without having to physically move the hard driveonto a PC connected to the primary domain.The Belkin router has a DMZ function which exposes an IP on its internal (192.168.2.x)network to the external (192.168.0.103) network.Is it feasible to expose the USB drive to my primary home network?
View 1 Replies View RelatedSMCD3G Cable Modem / Belkin Play N600 Router - Small Office Network?
Apr 21, 2011I'm trying to network a small office and have the following devices:
SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)
We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.
The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.
Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:
Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150
It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.
Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -
I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)
Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.
Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.
my computer - 192.9.2.2
wall jack 4 - 192.9.2.3
The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.
Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.
Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:
The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:
192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)
Cisco Routers :: SRP 527W Power Light Flashing / LAN Lights On
Aug 9, 2011We have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
Belkin Routers :: N150 Router V1 Is Blinking Orange?
Oct 22, 2012My N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies View RelatedDNS Server Isn't Responding - Wireless Icon Flashing Orange
Apr 13, 2012My internet has been dropping out over and over. Im connected via ether cable on my desktop with windows seven to my belkin router however on the router the wireless icon is flashing orange indicating something wrong. I rang my internet provider and they said its not them, when I troubleshooted the problem it came up with DNS server isnt responding. I tried looking through posts and tried restoring my router to factory default but nothing has worked.
View 14 Replies View RelatedBelkin Routers :: F7D1301 Turned To Solid Orange On Router
Oct 29, 2012F7D1301 v1 is my router model. i installed it this morning; all was working fine; then i changed password; still working fine; then i attempted to change pw a second time; router turned to solid orange and no matter what i try, i can't get it working again. i reset it, unplugged it, etc.
View 5 Replies View RelatedBelkin Routers :: N450 DB - Router Is Blinking Orange Although Connected To Internet
Feb 26, 2013I have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies View RelatedBelkin Routers :: F6d4230-4 / Wireless Is Flashing Red / Cannot Connect Xbox 360 Via Wi-Fi
Nov 30, 2012so my xbox cannot connect to my router via wifi..the password has been tried and tried and restarted and to no avail.. i look towards my model F6d4230-4 and the light labeled "wireless" is flashing red. and yet my laptop connection is just fine. how do i fix the flashing red "wireless light" on my model: f6d4230
View 1 Replies View RelatedBelkin Routers :: Possibility For F7D4402nt Play 600 On Windows 8?
May 15, 2013F7D4402nt play 600. i updated to windows 8 and the supplied software will not work. The software was very easy for a setup. Now i must do the things the hard way. a completely manual setup. it is a bit of a chore.
View 1 Replies View RelatedBelkin Routers :: Play F7D4402Uk Connection Slow?
Nov 21, 2012My Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.
View 2 Replies View RelatedBelkin Routers :: F5D8236-4 V3 / Cannot Download From Google Play Store On Wi-Fi But OK On 4G
Feb 3, 2013I can't download an app from Google Play Store. I can download from my 4G network but not the wifi - Belkin F5D8236-4 V3. Google troubleshooting says the firewall is blocking the 'ports required for Google Play to download (TCP and UDP 5228) on that network.' However, with the firewall 'disabled,' the download is still not working.
View 4 Replies View RelatedBelkin Routers :: N600 Incompatible With LAN?
Dec 12, 2012N600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?
View 1 Replies View RelatedBelkin Routers :: N600 DB - Set Up Software
Mar 4, 2013Where can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.
View 1 Replies View RelatedBelkin Routers :: N600 Says No To Scanner
Feb 13, 2013I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 1 Replies View RelatedBelkin Routers :: N600 And DD-WRT Compatibility
Mar 27, 2013Will the N600 Belkin router is DD-WRT compatible, because I saw in a database it is not. Is there also a way to make it DD-WRT compatible, e.g. flashing it ? Do you have a download on the router support side.
View 2 Replies View RelatedBelkin Routers :: N600 Will Not Open Any Web Browsers
Feb 9, 2013One of the laptops in my home connects to the wireless network provided by my brand new Belkin (N600 Dual Band) router with no difficulty at all - the other will not connect at all (it SAYS it is connected to the network, but it says that it is a 'Local Connection Only, and will not open any web browsers or allow you to get on to the internet) why is this happening and, more importantly.
View 1 Replies View RelatedBelkin Routers :: N600 Not Recognizing USB Media HD
Dec 30, 2012trying to add a media storage device (3 TB WD My Book Essentials) to my N600 DB router via USB. I have partitioned the HD 2 TB / 1 TB. I have tried several formatting scheme but the router is still not recognizing the HD. Have refreshed, reset, and done a firmware upgrade to the 600.
View 2 Replies View RelatedBelkin Routers :: See Files From N600 On Other Devices?
Jun 10, 2013I set up an external hard drive to my router. I don't know how to see those files on other devices.
View 2 Replies View RelatedBelkin Routers :: Using N600 As Wireless Adapter?
Jun 7, 2013Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?
View 2 Replies View RelatedBelkin Routers :: Share Printer Using N600?
Mar 4, 2013I have a Canon i6700d, which I connect to the belkin N600 USB port to share on the network. Driver for the printer is installed. From the belkin router monitor, the printer is listed under "Networked USB devices". However, the printer is grayed out and can not be selected. the dialog complains that the printer is not available.
View 1 Replies View RelatedBelkin Routers :: N600 VPN Pass Through Setting?
Nov 8, 2012Are Belkin routers compatible with VPN? Is there a VPN pass through setting for the N600?
View 3 Replies View Related