Belkin Routers :: N600 Showing Solid Red Light
Dec 5, 2012
I was having problems connecting to one of my usb devices that was plugged into my router. I unplugged the router to reset it and whenever it starts up it flashes green and the green light goes solid for less then a minute before turning red. It's a solid red light. I've tried unplugging everything and restarting it and nothing. Ironically it still lets me connect to the internet but when I access the control panel on my computer it shows as disconnected. Is this means my router is busted. This is my second Belkin Router and the only reason I had to replace the last one is because it was a G+Mimi router and I upgraded to an N Router.
View 3 Replies
ADVERTISEMENT
Oct 11, 2012
My N600 router has a flashing orange light on it. What's going on with this thing?
View 4 Replies
View Related
Jun 30, 2011
We have a root AP whose status light is showing solid red. We power cycled it and it still shows solid red. According to the Cisco documentation, this indicates a firmware failure. Unfortunately, we did not get Smartnet with this access points and instead opted for the limited lifetime warranty.
My question is: is there any way to fix the firmware via console? Whether it be through xmodem or what not. I ran debugs on the controller and can confirm that the AP is not communcating with the controller.
It is also weird that the mesh APs that were previously connected to this root AP show a solid red on their status lights and green for their RF LEDs. Shouldn't the status LED be flashing green-amber-red?
View 1 Replies
View Related
Dec 1, 2012
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies
View Related
Oct 16, 2011
I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies
View Related
Jun 3, 2011
every now and then my Belkin brand router will just switch from green light, to red light. Sometimes unplugging it for a while fixes it, sometimes unplugging it for a LONG while fixes it, sometimes prayer and chanting fixes it. But most of the time the red light sits there mocking my efforts.What's making this happen? Is it my wireless security settings? Because I used to try and fix it by pressing/holding down the WPS button.
View 4 Replies
View Related
Oct 29, 2012
F7D1301 v1 is my router model. i installed it this morning; all was working fine; then i changed password; still working fine; then i attempted to change pw a second time; router turned to solid orange and no matter what i try, i can't get it working again. i reset it, unplugged it, etc.
View 5 Replies
View Related
Dec 23, 2012
I have a DIR-615 v e3 router
Did a bad dd-wrt flash and now all it does:
-no power light
-solid green lights: WAN-L1-L2-L3-L4
tried to go to recovery mode (power on while holding reset switch).....does not work.my search on the internet revealed, that after bad flash, power light still comes on, maybe as orange, maybe blinking, or just blinks once
View 1 Replies
View Related
Apr 14, 2010
I have a Problem with a ASA 5505 when i power on the ASA the Power LED change to green and the Status light to solid amber. There is no Console output or anything else.
View 9 Replies
View Related
Oct 28, 2012
I've not found any topic related to what happened to me. Bought two cameras and upgraded the firmware on both as asked, but one of them just stopped. The light is solid green and not red like other posts.Tried the recovery procedure, but the browser won't find my camera. Changed computer IP and everything else that was told to be done. Nothing works!! I also can't find any posts relaled to my problem all over the internet.
View 3 Replies
View Related
Oct 14, 2011
I have an ASA 5505 with status light solid amber color. It is under SmartNet.I'd like to know Cisco will replaced this device with new ASA5505 or upgrade one?
View 2 Replies
View Related
Dec 12, 2012
N600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?
View 1 Replies
View Related
Mar 4, 2013
Where can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.
View 1 Replies
View Related
Feb 13, 2013
I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 1 Replies
View Related
Mar 27, 2013
Will the N600 Belkin router is DD-WRT compatible, because I saw in a database it is not. Is there also a way to make it DD-WRT compatible, e.g. flashing it ? Do you have a download on the router support side.
View 2 Replies
View Related
Nov 20, 2011
I have a WRT300N and the power light is dim and all 4 ports are solid green along with the internet light being solid green.. Nothing else is plugged in.. Just the power.. I have tried to hard reset and nothing happens.
View 2 Replies
View Related
Feb 9, 2013
One of the laptops in my home connects to the wireless network provided by my brand new Belkin (N600 Dual Band) router with no difficulty at all - the other will not connect at all (it SAYS it is connected to the network, but it says that it is a 'Local Connection Only, and will not open any web browsers or allow you to get on to the internet) why is this happening and, more importantly.
View 1 Replies
View Related
Dec 30, 2012
trying to add a media storage device (3 TB WD My Book Essentials) to my N600 DB router via USB. I have partitioned the HD 2 TB / 1 TB. I have tried several formatting scheme but the router is still not recognizing the HD. Have refreshed, reset, and done a firmware upgrade to the 600.
View 2 Replies
View Related
Jun 10, 2013
I set up an external hard drive to my router. I don't know how to see those files on other devices.
View 2 Replies
View Related
Jun 7, 2013
Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?
View 2 Replies
View Related
Mar 4, 2013
I have a Canon i6700d, which I connect to the belkin N600 USB port to share on the network. Driver for the printer is installed. From the belkin router monitor, the printer is listed under "Networked USB devices". However, the printer is grayed out and can not be selected. the dialog complains that the printer is not available.
View 1 Replies
View Related
Nov 8, 2012
Are Belkin routers compatible with VPN? Is there a VPN pass through setting for the N600?
View 3 Replies
View Related
Jan 13, 2009
I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 5 Replies
View Related
Mar 30, 2013
how do I rename my ssid on belkin n600 db. it did not come with a cd rom and all the online manuals do not discuss it.
View 1 Replies
View Related
Apr 20, 2013
I have a wi fi capable blu ray player which works on wireless g connections, and I also have 2 computers. I have the N600 Dual Band router, and want to know if it is possible to transmit on both frequencies? I am only seeing the 2.4ghz show up for a connection.
View 1 Replies
View Related
Oct 27, 2012
Tried to install a n600 DB on a windows 8 computer. Got the message "Not compatible. When will it be?
View 1 Replies
View Related
Mar 1, 2013
I'm a bit confused about Belkin's firmware upgrading. I lookup the firmware for my router N600 (F9K1102v1) and see that I've got options for v1, v2, and v3. Is it possible to upgrade my router to the v3 firmware? I'm guessing that I can't because its a v1 router, but just thought I'd ask just in case I can. Don't want to brick the thing.
View 2 Replies
View Related
Jan 19, 2013
The Belkin N600 DB N+ Router. It has 2 seperate networks for optimum performance, how do i go about choosing which band I want to use? Under the Belkin desktop I can clearly see 2 SSID's. One shows 2.4 GHz SSID & network name and the other 5GHz SSID & network name. media. But when I pull up my wireless connections I only see 1 network.
View 1 Replies
View Related
Feb 18, 2013
Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.14.4
Recently in the morning the router will have lost ability to connect to internet <internet light is on> and I cannot access the router page <sys light solid> from either wired or wireless connections. Why is this and will it be solved if I upgrade firmware?
View 2 Replies
View Related
Mar 12, 2013
Can't download newest firmware for F9K1102/N600 DB Router. I am on 1.00.19 and there are two newer firmwares, the latest being 3.03.12. This firmware is suppose to allow support for Windows 8. All my computers now have Windows 8 so I want this firmware, but I can't download it because the link provided by belkin no longer exists
View 3 Replies
View Related
Feb 13, 2013
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies
View Related
Dec 29, 2012
I have a N600 router. Yesterday, for the first time, I was unable to connect to the internet from my TV. It keeps saying network connection failed. I have unplugged the router and modem several times and that does not work. When I check the various wireless systems available (on the TV screen) I see mine there but it will not connect. At one point I did see something that said ethernet cable disconnected, but I checked and the cable is connected.
View 4 Replies
View Related
Dec 21, 2012
Just installed N600 router. Works for my Windows 7 PC and my Android phone. Does not work with my Windows VISTA PC. It connects to the Router ok, but does not connect with the Internet. Also says UNIDENTIFIED NETWORK. What am I missing?
View 1 Replies
View Related