Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
Region : Argentina
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version : 3.12.4 Build 100910 Rel.57694n
I did a hard reset and after that, when i power on the router, it works for aprox. 15 seconds, so i can access the interface at 192.168.1.1, but after those 15 seconds it doesnt respond. The lights are on as if it was perfect, but cant go on admins interface and ping doesnt work either. I did several resets, did the 30/30/30, and clicked on reset to factory defaults on those 15 seconds but nothing happens.
I have high speed internet connection. The following image shows how my ISP provides internet connections:
ISP.jpg
I am required to put IP address in my computer network settings. This IP is used to go to login page to put username/password. It is a web based authentication(kind of captive portal you can call). Done! I am connected to the internet. Super fast!Now, I would like to share this internet connection between two computers using WR741ND router. So, what I am doing is having both these two computers connected to the router using LAN ports whereas my ISP cable to the WAN port of the router. IP settings of both the computers are set to: Obtain IP address automatically.Configuration in the router:
Logged into the router--->Network--->WAN--->Static IP--->Settings saved
I am able to connect to the internet using any of the PCs. The problem is I am unable to access the internet simultaneously using both the computers. When one computer is in the process of loading website and I try to open a website on second computer the second computer does not start loading website at all and even the first computer stops opening the website.What change do I need to make in the router configuration? Can this internet connection be shared at all?
Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.13.12
ISP : Triple C
I'm trying to set up my new WR741ND router to replace the old WR541G with excctly the same cabling,ISP account etc.
All seem to be working i.e. I get the PPPoE connection against the ISP and cat ping by name to Internet addresses from THE ROUTER.Also I get DHCP handing out addresses both to my desktop connection by Ethernet cable and to my laptop via Wifi.And the computers may ping the router and also connect its admin GUI.However,the computers stop at the router and can't go further.All they can go is to the router as if it doesn't route between LAN and WAN.With the 541 router everything works and as I said it has the same setup (very basic,no static routes or anything too smart).
Region : Others
Model : TL-WR741ND
Hardware Version : V4.20.0
Firmware Version : 3.12.11
As you can see it's a simple network, I mostly use the network to share itunes library from PC CENTRAL to the other pcs, play games like counter strike and the like, and of course share the internet connection and copy files from one to another. I have to puntualize that all the computers are in the same room.Last week my mom bought a Toshiba Satellite and I bought a TP-LINK TL-WR741ND so she can work in her room (which is pretty far if I want to make a wire connection), so I installed the WiFi but now this is how my network looks like:> The case is that:
a) I can't access my toshiba from any other computer, but the toshiba can access any other using \192.168.1.# command.
b) The PC Central's iTunes library can be played in toshiba's itunes.
c) I can't make an HomeGroup between the two pcs running w7. Actually the only one pc I want to be working in LAN with the toshiba is PC Central, but as I said earlier, PC Central can't access toshiba.
The settings in the TL-WR740N are: WAN working as Dynamic IP (got IP 192.168.1.46 submask 255.255.255.0 and gateway empty), lan 192.168.0.1, (I can't make it to be 192.168.1.#, I think that's impossible cause it always gives me an error 5008). MAC filtering and that's the only thing I changed from default settings.
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 130325
ISP :
I have the firmware v130205 and the latest 130325 does not load as its size is too much by some bytes.(4096 vs 3969 expected.)
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.16.4 Build 130205 Rel.63090n
ISP : Fibertel
My TL-WR741ND is about 1 year and a half old, it was working fine until about 2 weeks ago. I need to reset it, times between resets is not consistent, meaning, it can take 30 minutes, or 8 hours, but it needs to be reset. Right now, there are 2 wired connections (PS3 and Desktop PC) and 7 wireless (4 cell phones, 2 notebooks and 1 netbook). 1 of the notebooks has static IP, and it also has a VM running, with another static IP. Also some port forwarding simply stopped working (ports 80 and 1180), the rest of the ports work flawlessly, but trying to forward the port 80 and 1180 (to the 2 static ips) won't work. I already upgraded the firmware, and the problem persists, also changed the channel (from 6 to 1, and then from 1 to 11).
Installing dd-wrt/openwrt/gargoyle or anything like that, is not an option. The only reason why I bough t this router, was because I could use dd-wrt, I installed it 1 year and a half ago, and it simply sucked, the wireless bandwidth was non existent, and it was a headache. I installed it again last week, to see if it could be a solution, and I was not even able to save changes in the control panel. I need a real solution, and installing a firmware that works only on chrome is not an option (specially when I use Firefox, and I needed to install chromium just to erase dd-wrt)
Region : China
Model : TL-WR741ND
Hardware Version : V4
Firmware Version :
ISP :
My router box and the router itself are listed as 741N. I find no reference in the forums or on the website to this model. During setup, I can ping the router from the cmd prompt, but then it fails during the Easy-Setup assistant. I need to use the Easy setup because the language is otherwise Chinese, but it fails the network test. One of the two messages it sends are "Check the Model number". Is this a possibility? Is there a work around or where can I find the proper Setup Assistant software?
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
Region : Brazil
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : TIM
The TL-MR3420 recognizes my modem (Olivetti Olicard 160), but it does not connect to the 3G network. I tested the modem on my PC and it connects fine. The PIN verification is deactivated and the Modem configuration is the same as I use on the PC, however it just keeps trying to connect without success. I updated the firmware to the latest version.
Region : Sweden
Model : TL-WR740N
Hardware Version : V4.20.0
I have a TL-WR740N. If router is on and I turn on my laptop it will not automatically connect to the router. I must turn off the router and then turn on again to get connection to the Laptop. I think I have missed something in configuration of the Laptop.
we just recently upgraded our router from an old model of d-link to tp link's tl-wr741nd. the wireless router was set up fine. but we noticed that we now experienced disconnection problems. our internet would just disconnect and then connect again every 5 minutes or so. but when i check the modem everything's fine. lights are on. even the lights on the modem are on. this problem never happened on our old router. is this possibly because of the N technology our new router has?
View 13 Replies View RelatedI have a weird problem. I bought recently a new router, and when I try to connect to the settings on it on http://198.168.0.1 it sometimes works, mostly doesn't. When I ping other devices which are connected it, it's the same; sometimes get a response, mostly I don't. The router model is: TP-LINK 150Mbps Wireless N Router TL-WR740N, The thing which it's connected to is entitled "ADSL2+ Ethernet bridge router" That aforementioned thing is suppoused to be a modem. But, when I try to connect to its settings from http://10.0.0.138 , I'm able to, and other who are connected to the network give response to a ping.
View 4 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.23
Firmware Version : TL-WR740N_V4_130104
ISP :
not getting advertised 150Mbps speed , only getting 72Mbps installed the latest firmware TL-WR740N_V4_130104 and the performance is so bad that i cant even use skype anymore , the main reason to buy this router was to move from 54Mbps to 150Mbps but not sure what is wrong , how to achieve that 150Mbps speed
Region : Colombia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : CLARO
Does not find Modem. Just purchased it in Cartagena, Colombia to use with ISP Claro.Using Modem ZTE model MF 190
Region : Colombia
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 110915 Rel.40896n
ISP :
i have a TL-WR740N router.I need connect 2 networks.
network 1 => 192.168.1.x connected to WAN port.
network 2 => 10.0.0.0.x connected to LANS port.
Router
assigned address:
192.168.1.101 WAN
10.0.0.225 LAN
[code]....
i can't connect to 10.0.0X network (pcs connected to router lans ports)I need bidirectional connection to networks.
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.
Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....
When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version :
Firmware Version :
ISP :
I've configured the router using the Easy Setup Assistant CD provided and have a wifi connection between the router provided however when using network diagnostics, while the wifi connection is fine, I am getting "failed to connect to Internet" and "failed to connect to server" messages. I have tried adjusting settings manually but without any progress.
My wireless recognizes my home networks, but bounces consistently from "acquiring network" to "automatic" and never connects me to the web. Just to test it out, I installed the Belkin WiFi USB Adapter to run it as a separate wireless, and it reacts the same way.
View 4 Replies View RelatedRegion : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL
I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.
I have suddenly started having issues recognising and connecting to a wireless network at home on my laptop. We have 2 wireless networks at home as we use an additional D-Link router through the powerlines. (DHP-W307AV PowerLine Homeplug AV Wireless N Starter Kit)I used to be able to connect to both but now I can just connect to the main wireless router. Other laptops and smart phones in the house can connect to both. I was wondering if this had anything to do with Norton 360 so I have used their removal tool to get rid of it. Unfortunately I still can't connect to the second network.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6087 Mb
Graphics Card: Intel(R) HD Graphics Family, -1276 Mb
Hard Drives: C: Total - 670401 MB, Free - 455832 MB; D: Total - 29691 MB, Free - 27474 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: avast! Antivirus, Updated and Enabled
I have a Dell Studio 1555 and normally my wireless connection works perfectly. It runs on Vista and I bought it in August 2009. Just recently I went to a friends house, and my wireless detected their router, but where normally it shows connection signal bars, it showed a red 'X' and wouldn't allow me to connect. It wasn't their router because their wireless on their computers were connecting to it fine. Then I went back to my house, my wireless was working fine, and connected automatically right away. The next weekend I went to my parents' house, where I have brought my computer and was able to connect to their wireless countless times in the past, did the same exact thing as when I was at my friends' house. Normally it will detect their router by their name because that is what they have it set at, but now it can only detect it as linksys. And it will not connect. I have no idea what to do because as soon as I go back to my house, my computer is able to connect to my wireless
View 3 Replies View Related-Region : Others
-Model : TL-WR740N
I am using TP-Link TL-WR740N as mentioned.Now I have a problem. In side my LAN I have four different PCs listening as Telnet Server at port 23. I want to create a telnet session over Internet with one of my PCs at a time.How should I do this? I mean what IP and Port number I should use to connect to my desired PC since all of my PCs are showing same public IP and that is of my router's IP.
Region : Australia
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
I am posting this in the wrong place but thats only because I cant find the forum for the TL-WR642G ver 3.6 device.Basically I am unable to see any QOS configuration and I wanted to know if this is available to this model ?I know the ver 4.0 firmware update states that QOS is added but can I update a 3.6 device using a ver 4.0 firmware ?
Region : Bangladesh
Model : TL-WR720N
Hardware Version : V1
Firmware Version :
ISP : Is pros
After i bought the router it was working perfectly. But after using 1 week it freezes now and then. Happens around 10-30 times a day. The one or two led lights stops flashing and no device can connect to the router or asses internet. Another issue is that sometimes i cant connect any device through wifi (tried with android phone and ipod) and and but works perfectly on my pc. If i restart my router is works perfectly but after 1 min-3 hours sames problem happens either router freezes or cant connect though wifi
Region : India
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version : 3.16.3 Build 130104 Rel.55864n
I have upgraded to the openwrt firmware in my router. I am having some problem to use it because I dont have the GUI access. Anyway I want to revert back to my original firmware. I cant use the internet through my router. How to revert back to the original firmware
Region : Others
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
I bought today new TP-Link TL-WR740N and I connected it with my cable modem as it is in manual instructed. There is problem with outgoing signal from router. It is about 1/10 from it should be (it is around 2Mbps from 20 Mbps). Same speeds are going out from router through LAN port and WiFI signal.
Region : USA
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version : 3.16.5 Build 130322 Rel.59120n
ISP :
Even before I did the latest firmware flash I couldn't select short GI under Advanced Wireless - it was simply greyed out even though WMM was enabled above it. Now after a factory reset and recreating all my settings I still can't select it.
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP :
How can u acces to the setup TP-Link WR740N router who is WDS with other router ???
I make changes like this , WDS with TP link (IP 192.168.0.1) with adsl wifi modem who is main ip 192.168.178.1 it`s working but ,my ip from TP-Link modem is not working (192.168.0.1),only the addrees from mu first router is working 192.168.178.1
How to enter in my TP-Link modem, or i can`t , only factory reset
Region : Romania
Model : TL-WR720N
Hardware Version : V1
Firmware Version :
I have to clone my MAC address of the router to share my internet. To do that i have to visit htt://192.168.1.1 , but that address doesn't work for me..
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
How can u acces to the setup TP-Link WR740N router who is WDS with other router? I make changes like this , WDS with TP link (IP 192.168.0.1) with adsl wifi modem who is main ip 192.168.178.1 it`s working but ,my ip from TP-Link modem is not working (192.168.0.1),only the addrees from mu first router is working 192.168.178.1.How to enter in my TP-Link modem, or i can`t , only factory reset