Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 130325
ISP :
I have the firmware v130205 and the latest 130325 does not load as its size is too much by some bytes.(4096 vs 3969 expected.)
Region : United-States
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
my Firmware Version is chinese i can't understand it.i go to tp-link.com go to support the last version is older with compare are old.
Region : Argentina
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version : 3.12.4 Build 100910 Rel.57694n
I did a hard reset and after that, when i power on the router, it works for aprox. 15 seconds, so i can access the interface at 192.168.1.1, but after those 15 seconds it doesnt respond. The lights are on as if it was perfect, but cant go on admins interface and ping doesnt work either. I did several resets, did the 30/30/30, and clicked on reset to factory defaults on those 15 seconds but nothing happens.
I have high speed internet connection. The following image shows how my ISP provides internet connections:
ISP.jpg
I am required to put IP address in my computer network settings. This IP is used to go to login page to put username/password. It is a web based authentication(kind of captive portal you can call). Done! I am connected to the internet. Super fast!Now, I would like to share this internet connection between two computers using WR741ND router. So, what I am doing is having both these two computers connected to the router using LAN ports whereas my ISP cable to the WAN port of the router. IP settings of both the computers are set to: Obtain IP address automatically.Configuration in the router:
Logged into the router--->Network--->WAN--->Static IP--->Settings saved
I am able to connect to the internet using any of the PCs. The problem is I am unable to access the internet simultaneously using both the computers. When one computer is in the process of loading website and I try to open a website on second computer the second computer does not start loading website at all and even the first computer stops opening the website.What change do I need to make in the router configuration? Can this internet connection be shared at all?
Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.13.12
ISP : Triple C
I'm trying to set up my new WR741ND router to replace the old WR541G with excctly the same cabling,ISP account etc.
All seem to be working i.e. I get the PPPoE connection against the ISP and cat ping by name to Internet addresses from THE ROUTER.Also I get DHCP handing out addresses both to my desktop connection by Ethernet cable and to my laptop via Wifi.And the computers may ping the router and also connect its admin GUI.However,the computers stop at the router and can't go further.All they can go is to the router as if it doesn't route between LAN and WAN.With the 541 router everything works and as I said it has the same setup (very basic,no static routes or anything too smart).
Region : Others
Model : TL-WR741ND
Hardware Version : V4.20.0
Firmware Version : 3.12.11
As you can see it's a simple network, I mostly use the network to share itunes library from PC CENTRAL to the other pcs, play games like counter strike and the like, and of course share the internet connection and copy files from one to another. I have to puntualize that all the computers are in the same room.Last week my mom bought a Toshiba Satellite and I bought a TP-LINK TL-WR741ND so she can work in her room (which is pretty far if I want to make a wire connection), so I installed the WiFi but now this is how my network looks like:> The case is that:
a) I can't access my toshiba from any other computer, but the toshiba can access any other using \192.168.1.# command.
b) The PC Central's iTunes library can be played in toshiba's itunes.
c) I can't make an HomeGroup between the two pcs running w7. Actually the only one pc I want to be working in LAN with the toshiba is PC Central, but as I said earlier, PC Central can't access toshiba.
The settings in the TL-WR740N are: WAN working as Dynamic IP (got IP 192.168.1.46 submask 255.255.255.0 and gateway empty), lan 192.168.0.1, (I can't make it to be 192.168.1.#, I think that's impossible cause it always gives me an error 5008). MAC filtering and that's the only thing I changed from default settings.
Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.16.4 Build 130205 Rel.63090n
ISP : Fibertel
My TL-WR741ND is about 1 year and a half old, it was working fine until about 2 weeks ago. I need to reset it, times between resets is not consistent, meaning, it can take 30 minutes, or 8 hours, but it needs to be reset. Right now, there are 2 wired connections (PS3 and Desktop PC) and 7 wireless (4 cell phones, 2 notebooks and 1 netbook). 1 of the notebooks has static IP, and it also has a VM running, with another static IP. Also some port forwarding simply stopped working (ports 80 and 1180), the rest of the ports work flawlessly, but trying to forward the port 80 and 1180 (to the 2 static ips) won't work. I already upgraded the firmware, and the problem persists, also changed the channel (from 6 to 1, and then from 1 to 11).
Installing dd-wrt/openwrt/gargoyle or anything like that, is not an option. The only reason why I bough t this router, was because I could use dd-wrt, I installed it 1 year and a half ago, and it simply sucked, the wireless bandwidth was non existent, and it was a headache. I installed it again last week, to see if it could be a solution, and I was not even able to save changes in the control panel. I need a real solution, and installing a firmware that works only on chrome is not an option (specially when I use Firefox, and I needed to install chromium just to erase dd-wrt)
Recently he was having connection issues so decided to upgrade firmware and for some reason he did it through the management console (clicked the update to have it download the new file automatically and instantly upgrade instead of doing it manually himself). Told him not to do that anymore. Anyway, it wiped the existing firmware obviously and did not update to the newest. I came over to find it wouldn't connect at all. I was able to get into the reset console (hold reset while powering on, manual set IP on computer to 192.168.0.2 and gateway to 192.168.0.1 an then pointed the browser to 192.168.0.1).This window shows the current firmware as version 1.0.0.1 dated in 2007.I had downloaded the version 3.0 firmware and the most recent version 3.13 and had them on a flash drive, dropped them on the hard drive and attempted to flash first the newest and then the 3. Neither one would take and the router remains down. The page itself never changed after hitting SEND to upload the firmware, the browser displayed a progress bar for "uploading" and hit 100% then just sat saying "waiting for response from 192.168.0.1" until the browser timed out after several minutes.
View 4 Replies View RelatedRegion : China
Model : TL-WR741ND
Hardware Version : V4
Firmware Version :
ISP :
My router box and the router itself are listed as 741N. I find no reference in the forums or on the website to this model. During setup, I can ping the router from the cmd prompt, but then it fails during the Easy-Setup assistant. I need to use the Easy setup because the language is otherwise Chinese, but it fails the network test. One of the two messages it sends are "Check the Model number". Is this a possibility? Is there a work around or where can I find the proper Setup Assistant software?
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 4.23
ISP : GTPL
I recently bought Tp-Link wr740N model but when i run Easy setup assistant on my Windows 8 64bit, A Welcome page appears. When i click START button , a windows error comes out saying. TP-LINK Easy Setup Assistant has stopped working with following error
[code]...
Region : Romania
Model : TL-WR740N
Hardware Version : V3
Firmware Version : 3.8.2 Build 080628 Rel.37228n
ISP :
I have a problem with my tplink router. In first of all I can't find my model in this forum. I have TL-WR641G [108M] and I cant upgrade my firmware.
My current firmware is:
Firmware version: 3.8.2 Build 080628 Rel.37228n
Hardware Version: WR641G/642G v3 081520C2
I tried to download the latest firmware from this page (V4) [URL] I press browse button from web interface, I select wr641gv4-en-up.bin and I press Upgrade but nothings happened. I read on other forums this router have 1MB internal memory and wr641gv4-en-up.bin have 1.07MB.
Region : Argentina
Model : TL-WR740N
Hardware Version : V1
my tp link router not working due to firmware or any other problem i dont know.when i powered my device 4 number port light is blinking without inserting cable and admin penal not opening i also try 192.168.0.1 or tplinklogin.net
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.23
Firmware Version : TL-WR740N_V4_130104
ISP :
not getting advertised 150Mbps speed , only getting 72Mbps installed the latest firmware TL-WR740N_V4_130104 and the performance is so bad that i cant even use skype anymore , the main reason to buy this router was to move from 54Mbps to 150Mbps but not sure what is wrong , how to achieve that 150Mbps speed
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : [/COLOR]
Region : United Kingdom
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : Plusnet
I bought this recently on EBay and it works fine. I have just checked the firmware version and it displays as 120703 rel 29722. This version doesn't appear amongst the downloads - the most recent is 120427. Has somebody upgraded to the wrong software? Should I upgrade to 120427?
I just have an old Dlink DIR-615 Wireless router. I have some problems with it and need to improve it... So, what is the best option... buy a new DIR-636L or 657 router or install the latest ddwrt firmware on the existing one?
View 3 Replies View RelatedI am replacing an A3 that's slowing dying with a B1. I understand the Firmware versions are different but I was curious if I can save the config file from the A3 and load it into the B1 ? I don't know if the config file includes the Firmware....
View 2 Replies View RelatedWriting this hoping to see how DLink intends to respond to this very large hole. As someone who works in security this is 2 week old news to me but is probably new to everyone else "Hopefully not dlink devs".
So the DIR 825 along with millions of other routers are vulnerable to an outside upnp exploit basically means somebody from outside can root your router and for example open up whatever ports they want. Upnp has its own issues but it useful for those who don't want to open up a port every time some app might need a specific port but was never meant to be accessible from outside your network, Until now.
This is not some bizarre proof of concept or something that is even hard to pull off and what it would give is access to your entire private network and everything that might entail. You can test if your router is vulnerable at this link. It's owned by Steve Gibson. Many of you probably know of him, Somewhat of a celebrity in the security world. There is a upnp exposure test you can do right off the main page. It also explains whats happening and even shows you the code being used, Quite fascinating actually.
we just recently upgraded our router from an old model of d-link to tp link's tl-wr741nd. the wireless router was set up fine. but we noticed that we now experienced disconnection problems. our internet would just disconnect and then connect again every 5 minutes or so. but when i check the modem everything's fine. lights are on. even the lights on the modem are on. this problem never happened on our old router. is this possibly because of the N technology our new router has?
View 13 Replies View Relatedwhat is the latest firmware version for d-link dir-825? It tell me that i currently got the 2.60VT, is it the last one? If no, where can i download and how the latest version?
View 14 Replies View RelatedMy firmware version 2.00NA (shipping version) is still working well.
When I selected 'Check online for any latest firmware' using the existing firmware, I got a message that that v2.07 (dated 2012-2-21) is available. Until now the router's check has always reported that I have the latest version.
I need to find out from other persons whether or not v2.07 is a real upgrade or is it full of bugs. I tried it once a long time ago and Shareport didn't work at all. Immediately I re-installed v2.00 and I've been pleased with the original shipping version.
What's the scoop on v2.07?
Where the list of changes for the latest firmware version can be found? My new DIR-655 has firmware from May 2010, and I see the latest and greatest on the DLINK website is from September. But it doesn't state what the changes are, so I'm not sure if I should upgrade or not.
View 8 Replies View RelatedI would upgrade the firmware before deciding to replace router with a new one. I noticed there have been several updates to the firmware since I originally installed the router with the current available firmware version of 1.35NA.
View 12 Replies View RelatedI have a DIR-655 Version B running the stock 2.0 firmware and a Motorola SB6120 cable modem and my ISP is comcast. I have had comcast come out and test my line and everything is fine. I have a desktop directly wired to the internet and several portable devices accessing the router.I cannot connect to the internet. My network is available and none of my devices ever indicate the network isn't available. When I try to load a website it just says "waiting for reply..." and nothing happens. The solution that always works is rebooting both the modem and the router. What is odd is that this problem comes and goes, I will go a week with zero issues, then I go all week with rebooting my stuff 5-8 times a day..What have I tried? I tried the settings that are recommended by Furrynuts to users complaining. I have also tried changing the wireless band settings to different channels as well.
View 6 Replies View RelatedWe have bought an 2504 Wireless Controller and now i want to download the newest Software, actually the Wireless Controller runs release 7.2.103. In the download section from Cisco i've found two "latest versions" the 7.0 with release date from 11.09.2012 and the other 7.3 with the release date 30.08.2012.
Now I'm a bit confused about this, because the higher release has an lower release date : Can you tell me the difference between this versions? and which version i should install?
I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View RelatedRegion : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
I need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?
View 2 Replies View RelatedI have 2 WAP4400N access points, each has a different version of the firmware installed and one has options that the other one does not.I have one access point running
If I visit the Cisco site for firmware updates, I see that only one version of firmware is available for this access point... 1.2.14.I realize that Linksys is not Cisco's main area of business, but if you are going to provide downloads for access points you could at least make sure that you have the latest version available.
Looking into a firmware upgrade. I have a WRT160N. The label on the back, next to Model Number, simply says WRT160N with no version number. I therefore conclude, per info on the Cisco site, that it is a V1 model, not V2 or V3. And yet the Admin web page for the router says firmware version is 3.0.02. I'm pretty confident I have never upgraded firmware on this router, which means this is how it came out of the box long ago. Latest firmware for V1 is 1.02.11; latest firmware for V3 is 3.0.03.
Should I upgrade to 3.0.03? Is there a way to downgrade to 1.02.11? I'm having some minor issues whch may or may not be the ruter's fault, I figure a firmware upgrade (downgrade?) will at least rule out router firmware issues.
