D-Link DIR-655 :: Configure File Install From 1 Version To Another?

Jul 28, 2012

I am replacing an A3 that's slowing dying with a B1.  I understand the Firmware versions are different but I was curious if I can save the config file from the A3 and load it into the B1 ?  I don't know if the config file includes the Firmware....

View 2 Replies


ADVERTISEMENT

D-Link DIR-615 :: Firmware Version 3.0 / 3.13 Won't Install

Nov 12, 2012

Recently he was having connection issues so decided to upgrade firmware and for some reason he did it through the management console (clicked the update to have it download the new file automatically and instantly upgrade instead of doing it manually himself).  Told him not to do that anymore. Anyway, it wiped the existing firmware obviously and did not update to the newest.  I came over to find it wouldn't connect at all.  I was able to get into the reset console (hold reset while powering on, manual set IP on computer to 192.168.0.2 and gateway to 192.168.0.1 an then pointed the browser to 192.168.0.1).This window shows the current firmware as version 1.0.0.1 dated in 2007.I had downloaded the version 3.0 firmware and the most recent version 3.13 and had them on a flash drive, dropped them on the hard drive and attempted to flash first the newest and then the 3.  Neither one would take and the router remains down.  The page itself never changed after hitting SEND to upload the firmware, the browser displayed a progress bar for "uploading" and hit 100% then just sat saying "waiting for response from 192.168.0.1" until the browser timed out after several minutes.

View 4 Replies View Related

TP-Link 150Mbps Wireless :: Firmware For TL-WR741ND V4 Version 130325 Does Not Install

Apr 20, 2013

Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 130325
ISP :

I have the firmware v130205 and the latest 130325 does not load as its size is too much by some bytes.(4096 vs 3969 expected.)

View 8 Replies View Related

D-Link DIR-615 :: How To Configure It To Use For File Sharing Outside LAN

Aug 22, 2012

I have prolem with Dir615 I doesn't know how to configure it to use for file sharing outside Lan. The problem with Dir615 I'm sure because when I swicth Dir615 to Dir100 it's works perfectly. Is there any magic box where should I mark tick?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: Backing Up Configure File (rom-0) Using Web Interface?

Feb 3, 2013

Region : France
Model : TD-W8151N
Hardware Version : V3
Firmware Version : latest
ISP : OrangeF

Received today my modem, configured it with some effort but it works... Now i'm trying to save ma config file (rom-0) using web interface, and when clicking on Maintenance > Firmware, i'm always getting:bug.jpg Seems to be a big bug

View 4 Replies View Related

IQU_bootstrap.exe File Wants To Install?

Oct 15, 2011

IQU_bootstrap.exe i keep telling it no or close the window i have not installed this want to know what the tech support thinks

View 3 Replies View Related

Cisco Wireless :: 2504 - Version To Install (7.0.235.3 Or 7.3.101.0)

Sep 17, 2012

We have bought an 2504 Wireless Controller and now i want to download the newest Software, actually the Wireless Controller runs release 7.2.103. In the download section from Cisco i've found two "latest versions" the 7.0 with release date from 11.09.2012 and the other 7.3 with the release date 30.08.2012.

Now I'm a bit confused about this, because the higher release has an lower release date : Can you tell me the difference between this versions? and which version i should install?

View 7 Replies View Related

Cisco Firewall :: Need Image File Install On Pix 515

Aug 28, 2011

I have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.

View 1 Replies View Related

Linksys Wireless Adapters :: How To Install WPC54G Version 2

Dec 8, 2006

I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?

View 5 Replies View Related

Cisco Firewall :: IOS-S636 Doesn't Install PAK File

Feb 18, 2013

I'm installing a new pack of signature on my IOS Firewall. This is what I'm doing
 
1.- Upload the .pak file on the flash memory.
 
2.- Install the package with the command copy flash:IPS/IOS-S636-CLI.pkg idconf but when the insallation finish it doesn't bring any error but when I enter the command sh ip ips sig it says S0.0

View 5 Replies View Related

Cisco Application :: ANM 4.3 Demo Version / Unable To Install License

Sep 18, 2011

I am installing the Demo version of ANM 4.3 on a virtual machine.The install was successful, however when i try to import the demo licence from my laptop to the server it does not allow me to tftp the file to the server.[URL]

View 1 Replies View Related

Cisco WAN :: 3750X - Evaluation License File Install Fail?

Mar 13, 2011

I'm trying to install a license file on a 3750x stack of 4 switches.  I was running IPBase but want to upgrade to IPServices.
 
Install a License
 
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #

View 1 Replies View Related

Cisco VPN :: Get Most Recent Install File For ASDM-IDM 1.5 Launcher Software

Apr 21, 2011

Where I can get the most recent install file for the ASDM-IDM Launcher software?  I'm currenly running 1.5(41).  Somebody mentioned they are at least up to 1.5(50), but he couldn't remember where the install file was.  I checked Cisco's software download site, but nothing came up for the Launcher.

View 2 Replies View Related

Linksys Wireless Adapters :: Install WMP54G PCI Version 4.1 In Windows 2000 Pro SP4 Computer?

Mar 26, 2011

I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer.  I ran the setup cd before installing the card, then took out the disk.  After installing the card and powering the computer, the Available Wireless Network screen didn't appear.  I also didn't get the Network Monitor icon on the taskbar.  Network Monitor appears in the start menu, but can't be started.  Device Manager says the card is working properly and there are no conflicts.
 
I uninstalled the software, removed the card, and repeated the installation process with the same end result.  The card light blinks like it is receiving data.  I'm using a Linksys WRT54G2 router.  Both my desktop (W7) and my laptop (Vista) connect just fine.  How can I get my W2K computer on the network?

View 5 Replies View Related

Home Network :: Can't Install / Extract Any File / Archive Downloaded Through Shared Connection Via LAN

Aug 30, 2011

I can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far

-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems

View 9 Replies View Related

Cisco VPN :: ASA Version 8.6(1)2 / Configure AnyConnect For 1st Time Via GUI?

Sep 25, 2012

I am trying to configure Anyconnect for the 1st time via the GUI, though I am comfortable with the command line if required.  I am familiar with PIX and IOS prior to 8.3 so this is my 1st time with newer versions. My equipment is in a lab environment at the moment but will be placed into production shortly.  I recieve the following errors when trying to establish an Anyconnect VPN connection with the local account on the ASA. Below is my config 
             
ASA Version 8.6(1)2
!
hostname TOR1PLXSD01
enable password sxZETAvnsVuPSnUc encrypted
passwd FomDbcd6ujnk.spR encrypted
names

[code].....

View 7 Replies View Related

Cisco Wireless :: Install / Configure Another 1142 As Repeater?

Feb 4, 2013

configuring 1142 ap for using centeal dhcp.Now i try to install another 1142 as a repeater for first 1142 point. 
 
Here is root config:
   
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 3floor

[code]....

View 1 Replies View Related

Cisco WAN :: Planning To Install And Configure VSS 6509 Switches

Mar 4, 2011

I am planning to install and configure VSS (6509) switches. But the customer requires that the First Switch should be the main and the second Switch should act as a backup one. (Disaster Recovery).
 
Once the Main (Primary switch) DOWN the Secondary one should coming UP.But what I am understand in VSS concept the two switches will act as one Switch. And both of them will be UP in the same time.
 
Is there any solution to configure the both VSS switch as primary and standby switch to provide HA?

View 4 Replies View Related

Cisco AAA/Identity/Nac :: ACS Version 4.2 (0) - Configure Shell Commands Authorization?

Sep 22, 2012

I'm trying to configure a shell commnds set such that all commands (including under conf t mode) will be allowed, except for administrative commands, such as write, copy, admin, format etc.It's been working for (most) priviliged mode commands (such as write and copy) but has been unsuccessful for any command under conf t mode. It's important in order to prevent the users from performing 'do write' and 'do copy run start' commands, for example.Here's the input of the shell command authorization set (Partial_access):
 
Unmatched Commands: permit
 Command list:
 admin
copy
delete
do

[code]....

View 2 Replies View Related

Cisco Firewall :: Configure IPSec VPN Connection For ASA 5505 (Version 8.4)?

Nov 20, 2011

I am now going to configure IPSec VPN connection for Cisco ASA 5505 (Version 8.4)

View 3 Replies View Related

Cisco Firewall :: How To Configure 515E (version 6.3(4)) To Be Used With ADSL Modem

Dec 5, 2010

How can I configure the Cisco 515E (version 6.3(4)) to be used with ADSL modem. Currently the compuerters are directly connected to the ADSL modem to get the priviate IP addresses and we would like to add the Cisco firewall after the ADSL modem.

ADSL Modem ---> Firewall --> Switch--> Computers

View 2 Replies View Related

Cisco Firewall :: 5510 To 5520 Configure File Transfer?

Jan 3, 2013

Is it possible to import the config of a 5510 to a 5520. Trying to replace two 5510's with 5520's and wondering is there a way import the existing config files for the 5510's into the 5520's?

View 3 Replies View Related

Cisco Switches :: SG200-26 How To Configure Fast NFS File Transfer

Aug 8, 2012

I have a SG 200-26. Port 1 goes to Internet. Port 2 to a Synology NAS. Port 3 to a 'small' gigabit hub with a computer and a media player connected. All gigabit connections. The media player uses NFS to access a share on the NAS. How do I configure the SG200 to get max throughput?
 
Reason is: before I used the SG200 I used a standard hub. THroughput was perfect, HD movies played seamless. With the SG200, performance is significantly less. HD movies are not playable.
 
I tried switching QoS on, ports 2 and 3 to level 7, and off. Did not solve the prob.

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS1113 Version 4.2 Ssh Version 1 / Specify Only Version 2 Or Turn Off SSH?

Sep 14, 2009

McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1.  Any way to specify only version 2 or turn off SSH?

View 9 Replies View Related

How To Install Tp-link 350

Jun 10, 2011

How to install tp-link 350

View 1 Replies View Related

D-Link DIR-825 :: Go Back To The Old Version?

Feb 9, 2011

I need USA style log. I have a DIR-825 B1 with Firmware Version: 2.05WW. How can I setup (; go back) to the USA 2.05NA version? The firmware upgrade was failed cause that the uploaded firmware file may not be correct..

View 8 Replies View Related

D-Link :: DIR-825 B1 - Firmware Version

Feb 14, 2013

Writing this hoping to see how DLink intends to respond to this very large hole. As someone who works in security this is 2 week old news to me but is probably new to everyone else "Hopefully not dlink devs".

So the DIR 825 along with millions of other routers are vulnerable to an outside upnp exploit basically means somebody from outside can root your router and for example open up whatever ports they want. Upnp has its own issues but it useful for those who don't want to open up a port every time some app might need a specific port but was never meant to be accessible from outside your network, Until now.

This is not some bizarre proof of concept or something that is even hard to pull off and what it would give is access to your entire private network and everything that might entail. You can test if your router is vulnerable at this link. It's owned by Steve Gibson. Many of you probably know of him, Somewhat of a celebrity in the security world. There is a upnp exposure test you can do right off the main page. It also explains whats happening and even shows you the code being used, Quite fascinating actually.

View 7 Replies View Related

How To Install Tp Link Router

Feb 22, 2013

how can i repair my pro link setup while network connection problem appears in the computers belonging to the same LAN

View 1 Replies View Related

D-Link DIR-615 :: Lost Cd For Install

Dec 19, 2012

The last time I let someone remotely access my computer it crashed. I lost the cd from the purchase of DIR-615. Tried to install from website but it can not detect the router to configure it. What to do? Buy another router that is not utilizing India companies for customer support

View 1 Replies View Related

D-Link DIR-825 :: What Is The Latest Firmware Version

Dec 11, 2012

what is the latest firmware version for d-link dir-825? It tell me that i currently got the 2.60VT, is it the last one? If no, where can i download and how the latest version?

View 14 Replies View Related

D-Link DIR-655 :: Firmware 2.07 For Hardware Version B1

Sep 23, 2012

My firmware version 2.00NA (shipping version) is still working well.

When I selected 'Check online for any latest firmware' using the existing firmware, I got a message that that v2.07 (dated 2012-2-21) is available.  Until now the router's check has always reported that I have the latest version. 

I need to find out from other persons whether or not v2.07 is a real upgrade or is it full of bugs.  I tried it once a long time ago and Shareport didn't work at all.  Immediately I re-installed v2.00 and I've been pleased with the original shipping version. 

What's the scoop on v2.07?

View 5 Replies View Related

D-Link :: DIR 825 - Share Port Version

Aug 27, 2011

I am using DIR-825 with share port Version 1.17 under Win 7 with Out post Pro Firewall V 7.1. Although I give {URL}, all rights to access the LAN and WAN it is not possible to get a connection to the router. Only shutting down the firewall entirely works to get access. (This cannot be the solution ). Is there any other file or service for which the firewall needs to be configured? I tried to open different ports for TCP and UDP as well - without any success.

View 1 Replies View Related

Unable To Install D-link Adapter?

Feb 23, 2013

At one time this D-link adapter was installed on this same computer but somehow the drivers got deleted.I am trying to reinstall. The computer is running Windows XP Professional. I downloaded the driver from Dlink's web site and unzipped the files on the computer.The Ethernet Controller shows up in Device Manager with the yellow ? so I right click it and the click on Update Drivers. But when I tell it to install the drivers a window comes up saying it cannot install because it cannot find the necessary software.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved