I have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.
View 1 Replies
I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedI've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
View 2 Replies View RelatedI'm installing a new pack of signature on my IOS Firewall. This is what I'm doing
1.- Upload the .pak file on the flash memory.
2.- Install the package with the command copy flash:IPS/IOS-S636-CLI.pkg idconf but when the insallation finish it doesn't bring any error but when I enter the command sh ip ips sig it says S0.0
I'm facing the problem that I can't install an CSD Image on the asa. Got the error:
[OK] webvpn
webvpn
[ERROR] csd image disk0:/csd_3.6.181-k9.pkg
The disk is (or was) full during extraction.
ASA 5510 has 256MB RAM, 1024MB Flash, ASA Version 8.2(5)41, ASDM 7.1(3)
I am in vain trying to transfer image to my asa5505, but fails in last step copying the file to flash:
Boots to rommon
tftpdnld image -> asa5505 boots on tftp file in en mode, i try to copy command but this fails, always getting No such device error. I have tried all different solutions found on google for this step, but it simply does not work, as i am never able to ping anything from the ASA.
rommon #6> tftpdnld
ROMMON Variable Settings:
ADDRESS=192.168.1.115
SERVER=192.168.1.113
GATEWAY=192.168.1.254
PORT=Ethernet0/0
VLAN=untagged
IMAGE=asa805-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
tftp asa805-k8.bin@192.168.1.113 via 192.168.1.254
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ciscoasa# copy tftp disk0:
Address or name of remote host []? 192.168.1.113
Source filename []? asa805-k8.bin
Destination filename [asa805-k8.bin]?
Accessing tftp://192.168.1.113/asa805-k8.bin...
%Error opening tftp://192.168.1.113/asa805-k8.bin (No such device)
Apparently it dont work with Eth, nor with vlan 1. Any way to shut down all functions in router so i can access everything?
I have a question regarding cisco aironet 1240ag AP.
1st - Does this devices has a firmware ? So I can update a firmware ? or is an image file for IOS software ?
2nd - Which wireless controller I can use to handle multiple aironet 1240ag AP's ?
3rd - The controller has the ability to create temporally guest password ?
i recently bought a new Supervisor Engine 720 WS-SUP720-3B and 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, power not allowed: Unknown Card Type. the System image file is "bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXE6a.bin".
I have a 6509 up and running the same mods and working fine BUT the System image file is sup-bootdisk:s72033-ipservicesk9-mz.122-18.SXF7.bin. Is the boot image what is causing my isses?
I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies View RelatedI had download the last version firmware 10.0.19 WAG54G2 but its in img format and my notebook dont have CD drive anyway to unpack it ??
View 3 Replies View RelatedI am doing image upgrade on Catalyst 6509-E. During TFTP image transfer to sup-bootflash I always see !!!!!!!!!!!!!!!!!o!!!!!!!!!! "o" out of sequence packet. Although the image size seems to be correct at the end but there is always some "o" packets.
I am assuming not, but I haven't tried loading with the image after seeing this.
IQU_bootstrap.exe i keep telling it no or close the window i have not installed this want to know what the tech support thinks
View 3 Replies View RelatedI am replacing an A3 that's slowing dying with a B1. I understand the Firmware versions are different but I was curious if I can save the config file from the A3 and load it into the B1 ? I don't know if the config file includes the Firmware....
View 2 Replies View RelatedI'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
Where I can get the most recent install file for the ASDM-IDM Launcher software? I'm currenly running 1.5(41). Somebody mentioned they are at least up to 1.5(50), but he couldn't remember where the install file was. I checked Cisco's software download site, but nothing came up for the Launcher.
View 2 Replies View RelatedI can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
i have an ASA 5510. it was running asa708-k8.bin and i have attempted to install asa821-k8.bin. i have done this on many ASAs before effortlessly.this time i have had an issue. the ASA will not load the new image, and for some reason will not even load the old.the ASA seems to just keep crashing. i have erased disk0 (advised in forum): and attempted to load the image from tftp. please see below. i know i need to re-formaet the flash, but cannot get into the ASA at all to complete this. [code]
View 2 Replies View RelatedI got a PIX 501 off ebay and im trying to upgrade it to have an ASDM image on it.Ive downloaded every copy of the ASDM image i can get my hands on, and when i transfer it to the PIX when its up and running i get out of memory, If i do it through monitor mode, i get the error "bad magic number" no matter what i transfer to itI can transfer a new image to the PIX (a non asdm one through monitor mode.
View 3 Replies View RelatedI just bought a used PIX515e. It is running version 8.0(3) and ASDM 6.1.5 Because I do not know the history of the unit, how can I tell if the image used came from cisco and not some download site? I guess I should've thought about this before buying it but hindsight is...you know. Worse case is that the person who had it before me dl the software that was infected with a backdoor or something else. I don't have a service contract so I'm kinda stuck.
Can I download the image from the firewall flash and compare a MD5SUM?
We are now using image 8.0(4) for my ASA 5510. Later on, I would like to upgrade the image to 8.4(3).May I have to know what difference for those images, what should I take care of the script?
View 1 Replies View Related I upgraded my ASA 5520 with the latest image. Now I get an error upon launching ASDM.Your ASA image has a version number 7.2(4) which is not supported by ASDM 6.4(1), use Device Manager version 5.2(x)Continue Anyway?
What are the newest, recomended image versions of ASA and ASDM I should be using?I will also be using the SSM-20 module with this setup, so I would like to stay with a working version of ASDM.
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?Do i need to upgrade other image also along with Firewall version 4.0(8)?
[code]....
I downloaded a new image to my ASA 5510 and found out up on reboot that the ASA doesn't have enough memory so I am booting to the "ciscoasa" prompt with no config. I still have my old image in disk0:. How do I roll back to this old image?
View 1 Replies View RelatedI have a pair of asa5520's in active/standby configuration. I plan on ugrading the asa/asdm images to 8.4 shortly (currently on 8.0) and would like to do this with zero downtime. Specifically, I would like to upload the new software to the standby unit, upgrade it, swap standby/active units and then upgrade what will become the standby after the swap.The problem I'm having is getting the new images uploaded onto the standby unit. I've read that the routing table is not shared from the primary and the USB ports are "for future use". I have no problem uploading the new images to the active unit via tftp...but can't do the same to the standby.
View 5 Replies View Relatedi am using asa821-k8.bin image, in my cisco 5520, How can i check if my IOS is vulnerable ?
View 4 Replies View RelatedI am wondering how to change which image is loaded by default on an ASA5510. I have two image files stored in the flash memory on disk0:/ but need to change which one is loaded on boot. I used the command "boot system disk0:/asa722-12-k8.bin" which completed successfully, but when the system starts it says two images exist and the default is 1, loading the previous file. Is there a command to change the order that is used?
View 2 Replies View RelatedI have an ASA 5505 that I was updating from frimware 8.04 to 8.41. Anyway, I went through the update procedure half-asleep and accidentally deleted the boot image right after I installed it (I used the CLI and put in the command del asa8*.bin then just hit enter a bunch of times, which of course means I deleted the old firmware too).
So now whenever I power up the ASA, I get the "Could not find boot file" error. Is there a guide somewhere that tells me how can upload another boot image to the ASA and set the ASA to boot it from teh ROMMON prompt?
I have a Cisco 5505 that had its disk erased (erase:disk0) and now I am trying to load a new image (822 or 813) from a tftp server.
From the ROMMON prompt I have configured the relevant parameters and run a tftp command.
The tftp transfer seems to complete successfully but then it gets stuck on "...loading".
I have tried different versions of IOS and I always experience the same problem, even though, with older versions of IOS (7.x), the device manages to reboot itself but then it crashes with the following error:
"Error : Uncompression of the image failed. invalid compressed data--format violated"
Could it be an hardware related-issue or a licensing problem maybe? or am I missing anything obvious?
also, with regards to the license: once restored, how do I get my 50 users license back?
May I have to know how to check functions included for asa image NCI-ASA5520-BUN-K9?
View 2 Replies View Relatedwe have an ASA5520 need upgrade new anyconnect client, but the new version is too big, so it's no enough space. I want to delete the ASDM image to free the more space. My question is when I delete the ASDM image,if I could manage the ASA from web browser?
View 5 Replies View RelatedFirmware asa805-k8 was installed and saved on an ASA5505. Upon power failure the ASA5505 reverts to an older firmware, asa724-k8. 1) Is it normal for ASA5505's to revert to older version upon power failure. 2) ASDM/web browser doesn't work using IE--username and password brings to empty screen. how to revert back to later image.
"
# sh ver
Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
[Code]......
The customer forgot the password for the ASA SSM-20 ips module installed in ASA 5520 Fw.show module in customer FW shows it up state. I brought it to our office teat bed. here it show
ASA1# sh module
Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
0 ASA 5520 Adaptive Security Appliance ASA5520-K8 JMX1022K03A
1 ASA 5500 Series Security Services Module-20 ASA-SSM-20 JAB101003C2
Mod MAC Address Range Hw Version Fw Version Sw Version
[code]....*-
what to do with this module in my test bed.I have to take it back to the customer site to use it in their ASA itself to troubleshoot.There it the status is up and i did use all the hw-module option but no use. The version is 5.0. This module is more than 5 years old and so far no one upgrade the image. ASA 5520 running 8.2.5.
I'm running a couple of 5520 (with failover configuration) and fw 8.3.1. Everything worked fine until I try to upgrade firewall to new fw version: 8.4.1. [code]
When I try to upload new firrmware or asdm image, ASA, the appliance reboots during tftp session. I've already tried to upload new images on both appliance, or use CLI either ASDM, but the result is always the same: ASA reboots.
From my point of view, the problem isn't the image but could be the firmware I'm running, becouse using fw. 8.0.1 I was able to upalod asdm 8.3.1, but using fw 8.3.1 I can't upload the same image.
