Cisco Firewall :: How To Check Functions Included For ASA Image NCI-ASA5520-BUN-K9
Jan 13, 2013May I have to know how to check functions included for asa image NCI-ASA5520-BUN-K9?
View 2 RepliesMay I have to know how to check functions included for asa image NCI-ASA5520-BUN-K9?
View 2 RepliesWe've ordered a 4500 core switch and 4948 Server Farm switch for our client, but the switch box does not include a IOS image CD or anything related to IOS image and now the client is asking us why is this item missing as the IOS
-S45UK9-32-1502SGCAT4500e SUP7e Universal Crypto Image
-S49IPB-12253SGCisco CAT4900 IOS IP BASE W/O CRYPTO
i am using asa821-k8.bin image, in my cisco 5520, How can i check if my IOS is vulnerable ?
View 4 Replies View Related I upgraded my ASA 5520 with the latest image. Now I get an error upon launching ASDM.Your ASA image has a version number 7.2(4) which is not supported by ASDM 6.4(1), use Device Manager version 5.2(x)Continue Anyway?
What are the newest, recomended image versions of ASA and ASDM I should be using?I will also be using the SSM-20 module with this setup, so I would like to stay with a working version of ASDM.
I have a pair of asa5520's in active/standby configuration. I plan on ugrading the asa/asdm images to 8.4 shortly (currently on 8.0) and would like to do this with zero downtime. Specifically, I would like to upload the new software to the standby unit, upgrade it, swap standby/active units and then upgrade what will become the standby after the swap.The problem I'm having is getting the new images uploaded onto the standby unit. I've read that the routing table is not shared from the primary and the USB ports are "for future use". I have no problem uploading the new images to the active unit via tftp...but can't do the same to the standby.
View 5 Replies View Relatedwe have an ASA5520 need upgrade new anyconnect client, but the new version is too big, so it's no enough space. I want to delete the ASDM image to free the more space. My question is when I delete the ASDM image,if I could manage the ASA from web browser?
View 5 Replies View RelatedI'm running a couple of 5520 (with failover configuration) and fw 8.3.1. Everything worked fine until I try to upgrade firewall to new fw version: 8.4.1. [code]
When I try to upload new firrmware or asdm image, ASA, the appliance reboots during tftp session. I've already tried to upload new images on both appliance, or use CLI either ASDM, but the result is always the same: ASA reboots.
From my point of view, the problem isn't the image but could be the firmware I'm running, becouse using fw. 8.0.1 I was able to upalod asdm 8.3.1, but using fw 8.3.1 I can't upload the same image.
I have a Cisco ASA5520 that we are going to use to allow users to connect to our network via the Anyconnect client, I have authentication set up to validate against AD via LDAP, but was wondering if there were any way to set up the profile to check the PC before they log in....we do not want users using their home PCs to attach to our corporate network, only PCs that were issued to them by the company. Nothing is jumping out at me in the config, we are running some fairly old sofware on the boxes (ASA - v8.2(2), Anyconnect - v2.5.3046) I plan on upgrading the Anyconnect to v3.1 but will probably need to keep running the 8.2(2) version on the ASA due to support issues.
View 2 Replies View RelatedI'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedI was having major issues with a 5505 (too long a discussion to go into here) so I formatted the disk and uploaded fresh binaries and recreated my configuration. I noticed the licenses were preserved. I also noticed there were several fsck records after the format that were reclaiming lost chains. I suspect the flash on this ASA is going bad, since everytime it boots it says "reading from flash ..!!" like it cannot even read flash successfully. When I purchased this one new, it also had several fsck records being brand new. I'm going to open a case on these flash issues/questions.
Anyway, after all of the above, the only thing that is not working is the botnet filter. [code]
Our firewall expert has gone off on long term illness leave and I am trying to pick up the pieces :-(
We have an ASA 5520 (local office) talking to another ASA (remote office) via a VPN Tunnel.
My 1st problem is that I cannot ping from my inside network (local) to the outside interface of my remote ASA.
My 2nd is that I have debug enabled on my rules but am not logging anything.
a link is added between Vail and Telluride in case if one of Aspen links fail to prevent AS 400 to become isolated. This link runs IBGP between both routers. Because this is an iBGP link, both routers will exchange BGP routes freely and automatically enters those routes into the routing table. Anyways, this link is advertised to OSPF through the BGP-to-OSPF redistribution. However, the book included that link in the OSPF configuration because as the book says "Without it, the iBGP session will not form" ... I did't get this part because the link is physical not logical between Vail and Telluride. Before the link was logical and the TCP session was performed through Aspen that's why we needed Aspen to know about this link. But now, it is physical so the iBGP (TCP) session should be formed without including that link in the OSPF config.
View 9 Replies View RelatedCisco 1941/2911 Fan Blower Assembly is included in router or order separately..?
View 1 Replies View RelatedWhat are the functions of TCP and UDP?
View 1 Replies View Relatedi know in Cisco PIX til 8.2 OS, if i have Nat control disabled and ACL permitting connection from Low Secirity ( DMZ ) to High Secuurity (INSIDE) then connectino should be successful, and i dont need any STATIC identity nat of inside IP to be created.
But i have Cisco PIX 525 with Version 7.2(2) Which is not allowing connection from DMZ to INSIDE , although nat control is disabled. and giving RFP check failure, any thought?
PIT525PIXINET# sh running-config nat-control no nat-cont
packet-tracer input dmZ tcp 192.168.85.4 65000 10.34.21.25 3389
Phase: 1
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
[Code]...
With regarding to the firewall ASA5520, i'm using it in my network, all the confiuration are properly configured and working but with the use of proxy address in internet explorer(e.:206.53.155.129/3128) all the blocked contents as easily accessible simply it bypass all the network through firewall.so will u guide me to block the proxy servers.
View 1 Replies View Relatedknow software that can show us software that shows most used websites through particular firewall?
View 8 Replies View RelatedASA running 8.2(5).When I enable ip spoofing on my network interfaces I see this getting logged:
Deny UDP reverse path check from 10.100.100.102 to 10.100.100.255 on interface SPECTRA-LAN
This is because interface SPECTRA-LAN (VLAN50) is the interface connected to the network with ip 10.100.100.0/24 but the interface do not have a ip address so it does not exist in the routing table I believe?However interface INTERN do also belong to network 10.100.100.0/24 which also is the management interface and the default route for hosts in network 10.100.100.0/24, but has no vlan.
1. move the management0/0 to SPECTRA-LAN and give SPECTRA-LAN ip 10.100.100.1?
2. give SPECTRA-LAN a ip address in the 10.100.100.0 range?
My routing table and interface list is:
Current available interface(s):
DATA-BACKUP Name of interface Redundant1.10
DMZ Name of interface Redundant1.900
GUEST Name of interface Redundant1.990
HOSTING Name of interface Redundant1.100
Infrastruktur Name of interface Redundant1.20
[code]....
Does ASA 8.4.3 check the source IP address of a DNS reply and drop it if the reply address is different to that in the query?
Customers DNS server does this due to a recent change, their server now has a virtual address, but replies are sent from its physcial address. This is temporary. Their PIX is happy with this.
Replace the PIX with the ASA, DNS fails, the only reason I can see is due to the way their internal DNS operates.
i allowed one of internal ip using static nat and public ip is 203.18.137.22 and i want to check which IP are hit this public ip ?Is there is any command to check which ip is hitting 203.18.137.22? I have the cisco 5520 asa firewall.
View 6 Replies View RelatedIs there a way to check the hardware status of an ASA 5505 ? I am thinking of a command or a script to execute.
View 3 Replies View RelatedI have a cisco asa 5520 and suddendley in my Network Monitor tool,(using SNMP) asa's DMZ interface traffic is showing arround 90000 Kbit/s .
i want to check which traffic is flowing throgh this interface.(Ip address details)
Note : There is no impact on asa CPU usage.
l have some problems when l try to access to the switch by telnet or ssh, by the console port , the switch show me the next message:l need restart the switch in order to access it again.
View 5 Replies View RelatedI have two asa 5520 firewalls. one at my primary data center connected to our production Internet feed, and one at my fail over data center connected to a backup internet feed. I was wondering if there was an easy way to keep the firewall rules in sync between the two firewalls. We have failover with our isp that will move our public facing address block from our primary site to our dr site in the event of a disaster so the ip addresses will not change if we were to have to fail over to the DR site. currently i just have to do any changes that i make on the fail over server but would like a way to at least simi-automat this if not fully automat this so that i can eliminate the possibility of human error of a change happening at primary but never getting don at DR.
View 1 Replies View RelatedI have several questions:
1. what are the actual functions/roles of a router firmware? Does the firmware work at routing or forwarding?
2. does the firmware automatically processes data? or...can he do that?
3. if a person connects to the internet through the router...does he came in contact with the firmware functions?
4. is the firmware accessed only when the user enters the configuration panel of the router?
I am new to this wireless router technology. I have purchased a DIR-615 a few days ago and am very happy with the results.I'd like to find a wireless color laser printer that functions well with this DIR-615. After reading many threads on the net about people having trouble connecting their wireless printer to the DIR-615, I figured that it would be best to ask for your opinion.Which one(s) have proven to function easily with this router, and which one would you choose?
View 15 Replies View RelatedI would like to use the web access control that is on the DIR-615 along with my 2Wire modem/wireless router. Is this possible? If not is is possible to put the 2Wire modem into bridge mode and purchase a second wireless modem to run along side the DIR-615 that I have so that I can have two separate wireless networks that have two different web access controls in place?
View 1 Replies View Relatedhow can i check that ASA is passing traffic? Also what command we can use to make sure VPN is working fine.
View 2 Replies View RelatedNeed to check how many tunnels IPSEC are running over ASA 5520.Tried commands which we use on Routers no luck?
View 6 Replies View RelatedWhen we setup a connection between two hosts we receive the message "TCP checksum incorrect" , This is between a settop box on the outside and a server inside the firewall. This STB used to communicate with the server on port 443 which is NAT-en to port 12697.With a new settop box image which uses on the inside and outside port 12697 we receive this TCP checksum incorrect on the Firewall with wireshark.
Strange is that on the outside of the firewall we see an MSS of 1460 and on the inside it is 1380 (don't know if there is a relation with this and the issue we have)
Is there a newer tool for current versions of Checkpoint to ASA 8.4? I notice a lot of similarity between checkpoint and 8.4 now, but I still have to do it all line by line which has become a PITA.
View 1 Replies View RelatedI am looking for for details meaning of license because I cannot found the details install. The license call
FLASR1-FW-RTU(=)
that is used to enable the firewall function in ASR 1000 series. But I don't clear about what feature inside, it is because it only show the "firewall" from website. Is that same as IOS firewall?
I'm testing debug spanning-tree functions in a lab, hardware is Cisco 6509 with SUP-720-3B and WS-X6748-SFP, IOS is 12.2.33.SXJ. It's a root in some vlan's, stp mode is rapid-pvst.I wanted to see how spanning-tree is working (STP packets dump, etc.), and entered following commands on 6509: [code]
Then, I turned the "debug spanning-tree all" mode on. Now, I expect to see BPDU packets from Cisco, and other spanning tree events in logs on syslog server, or in log buffer, but I don't get anyting there. Except, there're some lines in log (they repeat very rare): [code]