Cisco WAN :: 1941 - Fan Blower Assembly Is Included In Router Or Order Separately
Dec 10, 2011Cisco 1941/2911 Fan Blower Assembly is included in router or order separately..?
View 1 Replies
ADVERTISEMENT
Router And Modem Working Separately But Won't Connect To Internet
Nov 25, 2012Sometimes my wifi signal will randomly drop and I cannot browse the Internet. The network still appears on my computer and I can connect to it, however Internet pages will not load. This lasts for hours, sometimes days. If I unplug the modem from the router and connect directly to the modem via Ethernet, everything works fine! I have tried unplugging everything for 1 minute then plugging it back in and it does nothing.
View 2 Replies View RelatedCisco WAN :: AS 400 Why That Subnet Is Included In OSPF Configuration
Oct 9, 2011a link is added between Vail and Telluride in case if one of Aspen links fail to prevent AS 400 to become isolated. This link runs IBGP between both routers. Because this is an iBGP link, both routers will exchange BGP routes freely and automatically enters those routes into the routing table. Anyways, this link is advertised to OSPF through the BGP-to-OSPF redistribution. However, the book included that link in the OSPF configuration because as the book says "Without it, the iBGP session will not form" ... I did't get this part because the link is physical not logical between Vail and Telluride. Before the link was logical and the TCP session was performed through Aspen that's why we needed Aspen to know about this link. But now, it is physical so the iBGP (TCP) session should be formed without including that link in the OSPF config.
View 9 Replies View RelatedCisco Firewall :: How To Check Functions Included For ASA Image NCI-ASA5520-BUN-K9
Jan 13, 2013May I have to know how to check functions included for asa image NCI-ASA5520-BUN-K9?
View 2 Replies View RelatedCisco Switching/Routing :: 4500 IOS Image Not Included In Switch Box
Dec 2, 2012We've ordered a 4500 core switch and 4948 Server Farm switch for our client, but the switch box does not include a IOS image CD or anything related to IOS image and now the client is asking us why is this item missing as the IOS
-S45UK9-32-1502SGCAT4500e SUP7e Universal Crypto Image
-S49IPB-12253SGCisco CAT4900 IOS IP BASE W/O CRYPTO
D-Link DAP-1522 :: Make MAC Addresses From Bridge Will Be Recognized Separately
Nov 4, 2010I purchased a wireless bridge D-Link DAP-1522 (IP fix 192.168.0.50) to share the Internet connection to two remote devices: WD TV Live HD (IP fix 192.168.0.52) and a Samsung BD P2500 player (IP fix 192.168.0.51: to try the BD-Live) but when I plug it into my network I have an IP conflict and I can not navigate anywhere, even by the computer which control the Netgear router (IP 192.168.0.1 DHCP range 192.168.0.2-192.168.0.49).
I tried with all fixed IP (192.168.0.xxx Subnet mask 255.255.255.0 Gateway 192.168.0.1 DNS 192.168.0.1), but nothing to do, I have the same problem: after a few minutes after plugged the network cable into BD player the network falls.With wired connection (10 m of patch cable!!!) Samsung BD P2500 have no problem (DHCP and IP fix).
Then look closely in the information relating to devices connected to the Netgear router I noticed that all devices connected through the bridge DAP-1522 have the different IP but same MAC address and I think this could be the cause of the problem that creates the Blu Ray when it's connected to the network through the bridge, because he is not identified with any name but only as UNKNOWN as the bridge (a problem that WD Live not seen: same MAC address but is identified by name as WDTVLIVE).
How can I make the MAC addresses from the bridge will be recognized separately from my router/modem Netgear?In the settings of the bridge I noticed that you can enable or disable MAC address cloning, but if the off I would expect that cloning was not done and instead all the devices are identified by the Netgear router with the MAC address of the access bridge.The DAP-1522 masked the MAC address of device that are plugged into bridge.The router has the latest available firm while the original bridge has version 1.20 (the penultimate version available).
DELL 2816 - Benefit Of Setting Up VLANs If Subnets Wired Separately
Jun 12, 2013I have 2 sub nets within my office: 172.16.1.0/24 and 172.16.2.0/24. All devices on each subnet are wired independently from each other into the server closet. Previously each sub net had it's own switch in the closet to connect to that sub nets servers. We are replacing the 2 switches with a single Dell 2816 managed switch.
Is there a benefit to setting up the switch with 2 VLANs over just letting everything pass through the switch in un managed mode?
My only security concern is this: 1 sub net has access to the internet while the other does not. Does setting up 2 VLANs provide additional security by preventing 1 subnet from accessing the other? In other words, if a computer with internet access gets hacked will it being on one side of a VLAN prevent the hacker from accessing the other subnet?
Adding 2nd Wireless Router To Network In Order To Extend Range?
Mar 25, 2011i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 Replies View RelatedCisco Firewall :: Change Order Of Nat Rules (v8.4)?
Sep 26, 2011I have a question about the new nat implementation in an ASA 8.4. when I perform a "show nat" I get the following result:
1 (outside) to (inside) source dynamic any NAT-SSL-VPN_172.30.100.250 destination static 00B_172.30.100.0_24 00B_172.30.100.0_24
translate_hits = 26, untranslate_hits = 0
2 (inside) to (outside) source static LAN-HOST_172.30.100.11_LNX01 WAN-HOST_84.199.44.2_32_LNX01 service TCP-80-HTTP TCP-80-HTTP
translate_hits = 0, untranslate_hits = 0
Is it possible to change the order of the nat rules without removing and reapplying the rule on position 1 ? (both rules have to stay in section 1)
Cisco Infrastructure :: X.21.DTE 8 Cables Are Not In Numerical Order
Aug 17, 2011In what order the 8 cables go into the octal plug.The cable is a X.21.DTE 8 LEAD OCTAL part No 72-1100-01. The cables are not in numerical order (as in 0 to 7 as per the serial ports). I'm trying to trace cables and don't have a spare cable to examine. So far I think the order is 0,4,5,1, 2,6,7,3?
View 2 Replies View RelatedCisco WAN :: 3725 / The Order In Which Packets Are Processed
Nov 12, 2012I am implementing traffic export on the WAN interface of my 3725 router. I use a dialer interface for PPPoE which is applied to the Fa0/0 interface. This dialer WAN interface has Zone Based Firewall, NAT Outside, ACLs applied to it, as well as IP Traffic Export for an IPS. In what order would each of these items process a packet? In other words, is the order something like ZBF, ACL, IP Traffic Export, then NAT? How would QoS fit into something like this as well? I am asking because I am wondering how much processing the packets receive before they are mirrored over to my IPS.
View 1 Replies View RelatedCisco VPN :: ASA 7.1 Web Vpn Login Group Dropdown Order
Oct 8, 2006Is there a way to customize the order of the Groups in the drop down page on the login page?
Want to use a different group as default. Read over docs and not seeing a way to configure the login box dropdown order.
If it is not configurable, is it alphabetical on group name or the order they are configured ?
How To Get Emails In Order When Randomly Arranged
Jan 20, 2013My emails are randomly arranged, how do I put them in the order that they are 'sent' or 'received'?
View 2 Replies View RelatedCisco WAN :: 2811- ILPM 4 Motherboard Out Of Order After Upgrade
Apr 2, 2012I recently upgraded my 2811 router with an AC- IP power supply, and installed a HWIC-4ESW-POE, with an Inline Power Daughter Card (ILPM-4) installed on the HWIC.
The second I turned the router's power on, there was a spark and a burning smell. Everything still works, except POE. Examining the card, I see it caused a circuit on the ILPM-4 motherboard to blow, and there is black residue everywhere. This is a Genuine Cisco power supply, but why it's done this.
Furthermore, when the power supply was first installed, it had so much electricity (and I know this is why the card got toasted) that touching the end of the console cable or an Ethernet cable connected to the router, or even the router chassis, would cause you to get a small electric shock, like touching a mild electric fence. Clearly, the power supply I installed is "too-powerful", but it is a 2811-AC-IP and nothing should have caused this.
Change A Computer From One Network To Other In Order To Use FTP Server?
Mar 20, 2013how can I change a computer from one network to other in order to use FTP server
View 4 Replies View RelatedCisco Switching/Routing :: AF11 Order Of QoS Getting Processed In Switch
May 27, 2013i'm working on a QoS troubleshooting issue, I want to know the order how the QoS ACLs will be getting processed.For example I have configured the ACLs AF11, AF12 and AF13, in what order switch will process the ACL? does it in a ascending order fashion?
View 1 Replies View RelatedCisco WAN :: Specific License In Order To Enable NBAR2 In ISRG2 892 With IOS
Aug 22, 2012I was wondering to understand if there is an specific license in order to enable NBAR2 in my ISRG2 892 with IOS 15.2(3)T. If not, what is the basic license I need to have for NBAR2 ?
View 5 Replies View RelatedCisco WAN :: 878 Transparent Bridges In Order To Connect 2 Remote Sites Over ATM
May 24, 2012I have got two 878 integrated services routers and I need to configure them as transparent bridges in order to connect 2 remote sites over ATM.
As I'm testing the topology, I configured two switches (representing the sites) at each end with a VTP domain. VTP works while the switches are connected directly with eachother, but it won't work with the bridges in the middle. [code]
Cisco WAN :: 2800 - Interface Downtime In Order To Initiate DHCP
Feb 26, 2012I'm trying to find out what is the minimum downtime for a Cisco 2800 series LAN interface configured as DHCP client, in order to initiate a new DHCP discover. How much time does it need to take for the Cisco to "sense" the phy disconnection ?
View 4 Replies View RelatedCisco Firewall :: 5505 - Order Of NAT Not Matching Correct Line ASA 8.4
Aug 23, 2012We are configuring a twice-nat to send traffic for scansafe, its on a asa5505 ve 8.4(3) on a remote location for the customes. The nat redirecion is working but we also have a VPN tunnel to the corporate network. Through the tunnel we need to reach a http server. The problem we are having is that when we add the scan-safe nat, all http traffic gets redirected to scansafe, includind the traffic to the http server on the corporate network.
10.2.1.0 ---<ASA5505> ---Internet,scansafe ---- <Corporate> --- 10.1.1.0
the http server is 10.1.1.75
the remote location network is 10.2.1.0/24
[Code].....
Cisco :: WLC 4402 / Order Of WLAN Profiles In AP Group From MIB Files
May 19, 2009WLC Model
---------
WLC 4402
Software Version
----------------
5.2.178
Problem Statement
-----------------
Do we have any Cisco WLC MIB to get WLAN profile (Order in which WLAN profiles are added inside an AP Group) information present in an AP group?
Cisco Switching :: 6500 - In What Order Route-map Lines Be Removed
May 6, 2013I have a route-map on a 6500 thats is very definitely no longer required. 2 attempts to remove it have been a disaster.
[Code]...
The route-map and access-list ae not being used at all. Anyny tips for how I can get this removed - for info the process is mush easier on 7206 VXRs.
Cisco VPN :: PAK To Activate VPN On 1941 K9 Router
Jul 1, 2012We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941. Where I can buy a valid PAK? Could it be done via on-line support?
View 5 Replies View RelatedCisco VPN :: Activating SSL On 1941 Router?
Mar 23, 2011I have got a Cisco 1941 router and would like to activate my SSL VPN license on it. How do i go about it?
View 6 Replies View RelatedCisco WAN :: What Is The Processor Available In 1941 Router
Jan 31, 2012What is the processor available in cisco 1941 router? is it RISC?
View 4 Replies View RelatedCisco VPN :: How To Configure SSL VPN On 1941 Router
Mar 22, 2011How do i configure SSL VPN on a Cisco 1941 router? I would very much want a howto guide that does step by step. I have not found one my self so far.
View 1 Replies View RelatedCisco WAN :: Cannot Log Into 1941 Router To Setup
Mar 28, 2011We purchased this router with the cisco IOS software installed. I've installed the Vista driver on my win 7 box. I believe that should work. I installed Putty to termainl in and I'm using a USB connection. I cannot even log into the router. I thought I was going to see some kind of setup wizard using the CISCO software so I would use a GUI and get things moving. I've got loads of reference material with command etc. but I just can't connect to the router to make it happen.
View 3 Replies View RelatedD-Link DIR-615 :: Firmware Update / Current Or Subsequent Order?
May 1, 2011I tried to update my firmware on my DIR 615 by clicking the check now button within the routers parameters and got the file DIR615C1_FW311NAB04.bin The update bombed. I have hardware ver. C1 Firmware ver. 3.11NA dated June 23, 2009.Should I try and install the other firmwares in subsequent order, i.e. ver 3.11NA (dated 7/15/2009), then ver. 3.12 and then ver. 3.13 Or should the latest and greatest cover them all?
dwest.Wireless to router. No factory reset. ISP Ser. Cable ISP Router. Stand Alone.Modem Make & Model. I have to get up for that one, will have to report back tomorrow.
Dell :: 600m / Adapters And Bindings Connection Order?
Nov 9, 2003I have Centrino notebook, a Dell 600m. Most of the time I use WiFi with this notebook to communicate with the Internet and my desktop. However, when I want to backup my notebook to the desktop hard drive I prefer to use the 100 MBps speed instead of the 11 MBps speed of WiFi. I have setup the connections order in the Adapters and Bindings tab in the advanced menu item in the Network Connections such that the Local Area Connection (100 MBps) it above the Wireless Network Connection (11 MBps). Well, when I enable the Local Area Connection and plug it into my hub, a second little notification icon shows up in the indicating that the 100 MBps connection is active. When I perform the backup, both the wireless and wired connections show activity. Upon further investigation, I have found that data leaving my notebook is going via the wired connection data going to my notebook is using the WiFi network. Why is this and how can I have it use the wired connection for both upload and download?
By the way, I am using the built-in Windows XP networking software and am not using the Intel software.
Cisco Wireless :: 7500 Can Use Customer Radius Server In Order To Authenticate
Feb 5, 2013We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies View RelatedCisco Switching/Routing :: 6500 Line Card Boot Order?
Nov 28, 2011direct me to a document detailing the order that line cards are supposed to boot in a 6500? I'm noticing random boot sequences in some of my chassis,?Note: We currently run Sup720 3CXL for the most part.
View 6 Replies View RelatedCisco Firewall :: ASA5505 / Forward Ports 9000 And 85 In Order To Monitor DVR From Outside?
Jan 28, 2013i've a cisco asa5505 on adam 6.4 and a dvr i would like to forward the ports 9000 and 85 in order to monitor the dvr from outside?
View 1 Replies View RelatedCisco Switching/Routing :: 3750 - Power Stack Switch Out Of Order
Jan 16, 2012I have 4 switches in a 3750-X stack.Here is the output from the stack why are the switches out of order and I'm not able to bring up switch 1 port 1.
switch 4 port 2 shows not connect it is I've checked the cables.
Power stack name: Powerstack-4
Stack mode: Power sharing
Switch 1:
Power budget: 695
Low port priority value: 22
High port priority value: 13
Switch priority value: 4
Port 1 status: Shut
Port 2 status: Connected
Neighbor on port 1: 0000.0000.0000
Neighbor on port 2: c471.fe84.e100
Switch 2:
Power budget: 713
Low port priority value: 21
High port priority value: 12
Switch priority value: 3
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: c471.fe85.3000
Neighbor on port 2: c471.fe80.2800
Switch 4:
Power budget: 697
Low port priority value: 19
High port priority value: 10
Switch priority value: 1
Port 1 status: Connected
Port 2 status: Not connected
Neighbor on port 1: c471.fe80.2800
Neighbor on port 2: 0000.0000.0000
Switch 3:
Power budget: 710
Low port priority value: 20
High port priority value: 11
Switch priority value: 2
Port 1 status: Connected
Port 2 status: Connected
Neighbor on port 1: c471.fe84.e100
Neighbor on port 2: c471.fe7f.eb00s