i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 RepliesI have the WRT610N, and I was wondering if there is a way to repeat the 5GHz network to extend the range.I am trying to stream content from a Blu-Ray player, and while the 2.4GHz network reaches, the signal is very weak. The 5GHz network doesn't reach, but I would prefer to stream content through that network than the 2.4GHz.
View 7 Replies View RelatedI would like to know what to buy to extend the range of my wireless network , which will not reach throughout my house.
Also, I would like to know what the button is for on the front of of the router, since it is not a WPS button, according to ATT.
I'm trying to extend the range of my wireless network from my house to my workshop, which is about 600 feet away. There are no trees or other objects in between the two buildings. how I could boost my wireless signal to reach that far?
View 1 Replies View RelatedMy dorms have wifi in the common room, and ethernet wall ports in the rooms since wifi doesnt reach that far. They both have the same network name (e.g. the wifi network is named 'apple', and when i connect through ethernet in my room the name is also 'apple') I need to have wifi in my room. So, if i get a router and connect it to the ethernet port in my room's wall, would that work? Is that all you have to do or is there some other stuff i should know about?also can i put a password on it? And also, will it carry the network traffic of the common room?(if two people are using the common room's wifi, will the wifi speed in my room be affected nd whatnot) i have a linksys router lying around at home (the blue one with the double antennas, everyones seen them, and the one in the common room is the same...wireless g)
View 7 Replies View RelatedI am trying to use the Netgear WNR 2000 V3's repeater function to wirelessly extend the range of a Linksys WRT54GX V.2. I have the SSID's and channels the same. I had the Netgear working great as an extender with my Apple Airport Extreme base station (equipped with WDS). As far as I know, the Linksys is not equipped with WDS.
View 4 Replies View RelatedJust purchased WRT54GL for family friend to extend the wireless range of their DSL via 2Wire ATT modem Wireless router. One desktop computer will stay wired to the 2Wire and laptop or 2 will connect to the WRT54GL since the 2Wire cannot reach into the yard (metal buiding). I've seen several examples of connecting two WRT54G together. I Can I do that well with std Linksys software or would I be better off downloading Tomato or DD-WRT third party?
View 1 Replies View RelatedI purchased a 2nd router to boost my wireless range.in order to set this up, is all I have to do is set router 2 outside the range of the DHCP and turn OFF DHCP on router 2. Then I can successfully connect the two routers and if I am upstairs use router1 and downstairs use router2 wireless signal?What would be the pros/cons of using the same SSID? I know one benefit would be not having to set-up each device to connect to the new network name of router 2, but IDK what problems this could ensue. One immediate problem I can think of is if a device could not connect I wouldn't know which router (router1 or router2) the device was unable to connect to immediately.
View 3 Replies View RelatedI have a BT home hub 2.0A (BT is our ISP) it covers most of our house except for my bedroom. I have two spare routers i'm not using, one is a Speedtouch ST585 v6 and the other is a Belkin F5D7632-4 and was wondering if I could use these to extend the range of the home hub wirelessly. As far as I can tell I cannot install dd-wrt on any of these 3.
View 2 Replies View RelatedOur wireless router is in a room at one end of the house (beside the telephone point) from which ethernet cables can connect to the Cat5 sockets taking the broadband to the other rooms that have a Cat5 socket. That is fine for connecting devices to the sockets in the other rooms but because the house is old with thick walls our wifi signal fades to nothing in some parts of the house. Moving the wireless router only moves the problem to another area. I thought about a wifi repeater but the room I would like to locate it in to then boost the signal to the rest of the house is borderline on the range for the wireless router. Is it possible to connect another wireless router or device to the main wireless router through the Cat5 cabling so that the second router/device can offer wifi to that area of the house?
View 3 Replies View Relatedi having balkin f7d1401 how can i extend wifi range .
View 3 Replies View RelatedI have a couple of computers that are out of range of my router so I came up with a unique solution. I have an old laptop with 2 wireless cards that I put halfway between. It is working but I have a few oddities. First of all, the out of range computer is connected to another wireless router that several laptops and another (wired) PC connect to. It has ICS (Windows XP internet connect sharing) enabled. This rules out using ICS on the laptop as 2 pc's would have the address of 192.168.0.1.
View 1 Replies View RelatedI get 10% signal in my bedroom using WEP2 and I would like to boost this to at least 50%
1) I have 2 DIR-655 Wireless N routers, both functional.
2) The first router is on the other side of the house from my room
3) The second router is not in use at all ... I'd like to take advantage of it
4) I have an Ethernet drop in my bedroom that runs under the house to the first router. I have a switch on that drop and use it for my Sony / Netflix box ...
I have been told that the DIR-655 cannot be used as a repeater. Can I not take advantage of the 2nd router to boost my signal in any way?
how do i extend wireless range and increase signal to granny flat for internet? from the modem to the granny flat about 15m+, i tested it with my laptop get 3 green signal and on inSSID get around 74+ RSSI but with Asus-n13 and mini Tp Link wireless USB adapter get above 79-80 RSSI. don't know why but i get signal for surfing internet on laptop but randomly get drop out. household gave me $200 to improve the signal....
View 4 Replies View RelatedI have a WRVS4400N v2 acting as a gateway connected to a cable modem and am interested in extending it's range by placing a WAP4410N elsewhere in the building to cover a deadspot. Is there a mode on the WAP to best achieve this (e.g., wireless repeater, bridge, etc.)? I had assumed that it would be the wireless client/repeater mode, but the thread below leads me to believe otherwise, but is not labeled as resolved.
[URL]
As a different approach, could I extend the range of the original gateway WRVS4400N by dropping a second WRVS4400N in the deadspot and setting it to router mode? Language in the WRVS4400N v2 administrator screens lead me to believe that I could try this but I am unclear as to whether it would work wirelessly or need to be connected to the gateway via an ethernet cable, which is what I am trying to avoid.
I have two Dir-655's - router1 and router2.
Router1:
ip 192.168.0.1
subnet 255.255.255.0
DHCP enabled range = 192.168.0.100 to 192.168.0.200
Router 2:
ip 192.168.0.2
subnet 255.255.255.0
DHCP disabled
Routers are connected to each other via LAN ports with a switch in between.Both routers have the same wireless SSID with the same password. I am able to connect wirelessly to both routers no problem.
I have a machine running a shared iTunes library which has a wired connection to router1. I also have an Apple TV wired to router2. My issue is if I am connected wirelessly to router2 I may or may not be able to connect to iTunes library. Conversely, if I am connected wirelessly to router1 I may or may not be able to play content from iTunes to Apple TV. I cannot figure out why everything works fine sometimes yet at other times I cannot connect devices between the two routers.
I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
View 1 Replies View RelatedI have a WRP400 connected to the internet, and have a WAG160N that I no longer use and would like to to extend my wireless range.I connected them via an Ethernet cable and it seems to work fine without configuring the WAG160N (seemed to just work automatically), but I can't access the WAG160N admin GUI (tried all sorts of IPs in the WRP400 range) to change any settings (frustrating). My guess is that it's probably not the best way to set it up.
1. Set the IP of the WAG160N (The WRP400 is set to 192.168.15.1, so should I change the WAG160N to 192.168.15.2. Or should I be setting it within the WRP400's DHCP range which starts at 192.168.15.100?)
2. Swtich off the DHCP on the WAG160N. (I think I tried this late last night and it wouldn't assign an IP to my laptop, unless I did somehting wrong)
3. Connect the two using a ethernet cable.
After I do this I should still be able to access the WAG160N's admin GUI with the IP assigned in step 1?
We own two houses next door to each other and I have the first 655 set up as WAP, wired to second in other house as a range extender. Works perfectly. I would like to add a third 655 (wired to the second) to extend my range further.
View 5 Replies View RelatedHow do I extend my wifi network?I have a Dlink DIR 615....
View 5 Replies View RelatedI have a Belkin F6D4230-4 Enhanced N150 router. Would it be advisable to add a range extender to hit weak signal areas or simply upgrade to a more powerful router?
View 1 Replies View RelatedI have a WAG354G that i would like to use to extend the range of my WiFi. First Question is - is it possible, and the second is how do i do it?
View 3 Replies View RelatedI have a wireless router (TP-Link) which I want to use to extend my wired dorm room cable connection.The "blue" network cable currently goes straight into my laptop and I have no control over its configuration.Is it possible to plug the blue cable into the WAN port of my router and then wire the computer back into a LAN port?BUT that's not really the major problem. Mainly I would like to know how the router must be configured to allow me to use other wireless devices in my room (phone printer etc).Someone told me that I "just" need to use the "bridge" setting but that turned out to be complicated by warnings and messages about other SSIDs.Is "bridge" really the right mode? It seems it's for connecting two wireless networks together.
View 4 Replies View RelatedI have a simple configuration. E2500 using 2.x ghz N-only configuration. The router in in my office. I want to extend the same network ssid by adding another router in the kitchen, on the other side of the house. I haven't purchased the other router yet
View 1 Replies View RelatedHow do you have the WAP610N and WRT610N using the same SSID? I would prefer to have my WAP610N simply just extend my network instead of broadcasting another.
View 1 Replies View RelatedI am having problem using the N300 dual-Ban Wi-Fi Range extender with my att 2wire 3800HGV-B router. Cannot use the extender to access the internet. The Att router works without it. Just want to use the extender to extend my att router signal but cannot.
View 3 Replies View RelatedI've recently upgraded my internet provider to BT and received a BT Home Hub 3 as the new wireless router.Previous to this I was using a wireless Belkin G + MIMO ADSL router (model number F5D9630-4).There are places in the house where the wireless signal is very poor. Connecting to the internet using either of these routers is difficult in these spots. However, since the Belkin is now spare, I've been thinking about trying to use it as a low cost repeater (i.e. free) to extend the wireless range in the house.There are several good articles that I've found on this site which address the connection of two routers together (e.g. John Will's article on connecting two SOHO routers is a good example), but they rely on an ethernet connection between the two routers. Any way to establish a wireless link between the two routers to extend the range of the current wireless network.
View 9 Replies View RelatedI currently have a Linksys WRT310N as my primary router/wireless device. I am not getting coverage in my entire home. I was considering purchasing the Linksys E4200 and using the WRT310N as an access point in another part of my house to extend my wireless network. From all of the research and reading I have been doing, it seems that I must connect the WRT310N to the E4200 if I want to use it as an access point. Is this the only way? I have no way to connect the WRT310N to the soon-to-be E4200 unless I run an Ethernet cable across the floor. My goal is to use the WRT310N as a wireless access point without having it wired to the E4200, if at all possible. If this is not, what other way could I go about doing this type of setup?
View 3 Replies View RelatedI have a E4200v2 i also have a Airport Extreme I want to use this to extend my wireless range in my house? I've played around a little tring to configure the Airport extreme but can't seem to get it to connect to my E4200v2? Can you mod the Airprt Extreme with dd-wrt or something that might unlock some of the features?I can't stand the interface. The E4200v2 is brand new.
View 1 Replies View RelatedIs it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how?
View 2 Replies View RelatedI am trying to extend my home network into my basement with both wired and wireless connections. I have a WRT120N upstairs, which is connected to my cable modem. I have an E1200 in the basement, which I have connected with a LAN port. DHCP is turned off, and all wired connections are getting an address from the upstairs router, and connecting to the internet successfully.I've configured the wireless with the same SSID on both routers, but the clients that connect to the downstairs wireless are not able to access the internet. They are getting an IP address from the upstairs router, but can't get past the gateway.
View 1 Replies View RelatedI have recently reset my SMC 2804WBRP-G Router because I forgot my old WEP Key. Now when I set a new key, my wireless devices will not connect to the router.
It works fine without securing the router with a key, but I don't want my neighbors stealing my Internet bandwidth.
I have a home network with an older desktop, two laptops, couple of PDA and now a cellphone. I'm using using a WRT 110 router I bought new a couple of years ago. It run flawlessly even when I switch from DSL to Comcast Internet.My printer (HP All-in-one) is currently attached to the rear of my desktop and if I want to print anything I have to fire up the desktop. Can I plug the printer in the WRT 110? Be able to print form my laptops?
View 4 Replies View Related