how do i extend wireless range and increase signal to granny flat for internet? from the modem to the granny flat about 15m+, i tested it with my laptop get 3 green signal and on inSSID get around 74+ RSSI but with Asus-n13 and mini Tp Link wireless USB adapter get above 79-80 RSSI. don't know why but i get signal for surfing internet on laptop but randomly get drop out. household gave me $200 to improve the signal....
View 4 RepliesI have a BT home hub 2.0A (BT is our ISP) it covers most of our house except for my bedroom. I have two spare routers i'm not using, one is a Speedtouch ST585 v6 and the other is a Belkin F5D7632-4 and was wondering if I could use these to extend the range of the home hub wirelessly. As far as I can tell I cannot install dd-wrt on any of these 3.
View 2 Replies View RelatedI am having problem using the N300 dual-Ban Wi-Fi Range extender with my att 2wire 3800HGV-B router. Cannot use the extender to access the internet. The Att router works without it. Just want to use the extender to extend my att router signal but cannot.
View 3 Replies View RelatedI have a couple of computers that are out of range of my router so I came up with a unique solution. I have an old laptop with 2 wireless cards that I put halfway between. It is working but I have a few oddities. First of all, the out of range computer is connected to another wireless router that several laptops and another (wired) PC connect to. It has ICS (Windows XP internet connect sharing) enabled. This rules out using ICS on the laptop as 2 pc's would have the address of 192.168.0.1.
View 1 Replies View RelatedI'm trying to extend the range of my wireless network from my house to my workshop, which is about 600 feet away. There are no trees or other objects in between the two buildings. how I could boost my wireless signal to reach that far?
View 1 Replies View RelatedI get 10% signal in my bedroom using WEP2 and I would like to boost this to at least 50%
1) I have 2 DIR-655 Wireless N routers, both functional.
2) The first router is on the other side of the house from my room
3) The second router is not in use at all ... I'd like to take advantage of it
4) I have an Ethernet drop in my bedroom that runs under the house to the first router. I have a switch on that drop and use it for my Sony / Netflix box ...
I have been told that the DIR-655 cannot be used as a repeater. Can I not take advantage of the 2nd router to boost my signal in any way?
I am trying to use the Netgear WNR 2000 V3's repeater function to wirelessly extend the range of a Linksys WRT54GX V.2. I have the SSID's and channels the same. I had the Netgear working great as an extender with my Apple Airport Extreme base station (equipped with WDS). As far as I know, the Linksys is not equipped with WDS.
View 4 Replies View RelatedI have a WRVS4400N v2 acting as a gateway connected to a cable modem and am interested in extending it's range by placing a WAP4410N elsewhere in the building to cover a deadspot. Is there a mode on the WAP to best achieve this (e.g., wireless repeater, bridge, etc.)? I had assumed that it would be the wireless client/repeater mode, but the thread below leads me to believe otherwise, but is not labeled as resolved.
[URL]
As a different approach, could I extend the range of the original gateway WRVS4400N by dropping a second WRVS4400N in the deadspot and setting it to router mode? Language in the WRVS4400N v2 administrator screens lead me to believe that I could try this but I am unclear as to whether it would work wirelessly or need to be connected to the gateway via an ethernet cable, which is what I am trying to avoid.
I have two Dir-655's - router1 and router2.
Router1:
ip 192.168.0.1
subnet 255.255.255.0
DHCP enabled range = 192.168.0.100 to 192.168.0.200
Router 2:
ip 192.168.0.2
subnet 255.255.255.0
DHCP disabled
Routers are connected to each other via LAN ports with a switch in between.Both routers have the same wireless SSID with the same password. I am able to connect wirelessly to both routers no problem.
I have a machine running a shared iTunes library which has a wired connection to router1. I also have an Apple TV wired to router2. My issue is if I am connected wirelessly to router2 I may or may not be able to connect to iTunes library. Conversely, if I am connected wirelessly to router1 I may or may not be able to play content from iTunes to Apple TV. I cannot figure out why everything works fine sometimes yet at other times I cannot connect devices between the two routers.
Ground floor: My ISP's wireless router and an 8-port switch. For wireless communication I use the ISP's Wifi and the 8-port switch is used for wired rj45 sockets around the house.
1st Floor: I have a TP-LINK TL-WR740N Wireless Lite N Router 150 MBps which I connected to a socket and have a PC connect with wire on it and also used for Wifi. The Wifi network I setup on the 1st floor is different than the one on the ground floor (2 routers).
At the first floor I have the problem that in other bedrooms far from the router the Wifi signal (either gets lost) or it's very low. So I bought a TP-LINK TL-WA701ND Wireless N Access Point 150MBps which I configured as universal repeater.
The access point supports only WEP encryption when used as repeater/universal repeater so I changed the wifi of the router to WEP with ASCII with 128bit character length and established the connection.The most important now is that even though the Wifi signal in the bedroom with the AP is full, when I switch off the wifi of the iPad and back on, it is not connecting to the internet. Yesterday I noticed that it was giving me the ethernet card IP (169.…). I went close to the router with the iPhone, got connected and when came back to the room with the AP it was working but the iPad is not working.
i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 Replies View RelatedJust purchased WRT54GL for family friend to extend the wireless range of their DSL via 2Wire ATT modem Wireless router. One desktop computer will stay wired to the 2Wire and laptop or 2 will connect to the WRT54GL since the 2Wire cannot reach into the yard (metal buiding). I've seen several examples of connecting two WRT54G together. I Can I do that well with std Linksys software or would I be better off downloading Tomato or DD-WRT third party?
View 1 Replies View RelatedI have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
View 1 Replies View RelatedI have a WRP400 connected to the internet, and have a WAG160N that I no longer use and would like to to extend my wireless range.I connected them via an Ethernet cable and it seems to work fine without configuring the WAG160N (seemed to just work automatically), but I can't access the WAG160N admin GUI (tried all sorts of IPs in the WRP400 range) to change any settings (frustrating). My guess is that it's probably not the best way to set it up.
1. Set the IP of the WAG160N (The WRP400 is set to 192.168.15.1, so should I change the WAG160N to 192.168.15.2. Or should I be setting it within the WRP400's DHCP range which starts at 192.168.15.100?)
2. Swtich off the DHCP on the WAG160N. (I think I tried this late last night and it wouldn't assign an IP to my laptop, unless I did somehting wrong)
3. Connect the two using a ethernet cable.
After I do this I should still be able to access the WAG160N's admin GUI with the IP assigned in step 1?
At the moment i have 3 routers across the house, each acting as a wifi access point.My problem comes to when i use my phone or laptop, it connect to a random access point doesn't matter of the signal.Is it possible to combine 3 routers as one access point. So that i would connect to one access instead of 1of 3 access points, that would be a strong wifi signal no matter when i am in the house. Something similar to what bit malls or stores have.I have looked at wi-fi repeaters, but they just repeat the wifi and make new access point.
View 2 Replies View RelatedI have the WRT610N, and I was wondering if there is a way to repeat the 5GHz network to extend the range.I am trying to stream content from a Blu-Ray player, and while the 2.4GHz network reaches, the signal is very weak. The 5GHz network doesn't reach, but I would prefer to stream content through that network than the 2.4GHz.
View 7 Replies View RelatedI would like to know what to buy to extend the range of my wireless network , which will not reach throughout my house.
Also, I would like to know what the button is for on the front of of the router, since it is not a WPS button, according to ATT.
I have available two Linksys Wireless-G Broadband routers (WRT54G2) which were given to me by a family member. We have been using one of the routers by itself for quite some time, but do not have adequate signal throughout our home. I decided it would be easier to design the floor plan of the house for you to see its location in relation to the rest of the house regarding walls and what not. We have HughesNet Satellite internet which is located on the roof just about the location of the modem and router in the bottom right of image.
What do you think would be the best location of the main router? I have read it would be best centrally located since the signal travels horizontally and vertically. I just purchased a 100' Ethernet cable since the only one we had was what the HughesNet installer provided us with which is about 4'. I was originally thinking I would route the cable from the main router to the basement where the second router would be placed since the signal down there is about 1 out of 3 bars on my iPhone. The signal upstairs in the main room (room in top middle of image) ranges from 3-5 out of 5 bars on my laptop.
I just wanted to place a post sooner rather than later to see what your opinions were on the location of the main router and what I have in order to increase the signal.
I plan to extend the wireless signal for RV220W as a wireless access points now. Can we use lower end model instead of another RV220W?
View 2 Replies View RelatedI have a Linksys WRT120N plugged directly into my cable modem upstairs, an 8 port switch plugged into it, an ethernet cable from it run downstairs in my house to another 8 port switch and a Linksys E4200 plugged into it. I want both routers to allow me to connect to the internet wirelessly if possible. I cannot even access the E4200 from a browser, because the IP adress 192.168.1.1 goes directly to the WRT120N.
View 4 Replies View Relatedhow do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
We own two houses next door to each other and I have the first 655 set up as WAP, wired to second in other house as a range extender. Works perfectly. I would like to add a third 655 (wired to the second) to extend my range further.
View 5 Replies View RelatedHow do I extend my wifi network?I have a Dlink DIR 615....
View 5 Replies View RelatedI have a Belkin F6D4230-4 Enhanced N150 router. Would it be advisable to add a range extender to hit weak signal areas or simply upgrade to a more powerful router?
View 1 Replies View RelatedOur wireless router is in a room at one end of the house (beside the telephone point) from which ethernet cables can connect to the Cat5 sockets taking the broadband to the other rooms that have a Cat5 socket. That is fine for connecting devices to the sockets in the other rooms but because the house is old with thick walls our wifi signal fades to nothing in some parts of the house. Moving the wireless router only moves the problem to another area. I thought about a wifi repeater but the room I would like to locate it in to then boost the signal to the rest of the house is borderline on the range for the wireless router. Is it possible to connect another wireless router or device to the main wireless router through the Cat5 cabling so that the second router/device can offer wifi to that area of the house?
View 3 Replies View Relatedi having balkin f7d1401 how can i extend wifi range .
View 3 Replies View RelatedI have a WAG354G that i would like to use to extend the range of my WiFi. First Question is - is it possible, and the second is how do i do it?
View 3 Replies View RelatedMy friend has an internet connection and Wifi, it reaches my room but with poor signal, is there any way I can strengthen up the signal?
View 1 Replies View Relatedwhich will can extend the signal strength? changing antennas, put a wireless amplifier or buy ASUS 66U??change TPLink TL-WR1043ND to ASUS 66U ??? ASUS 66U is best to TPLink TL-WR1043ND and can extend the signal strength by up to twice the distance?
View 1 Replies View RelatedI just got a new-to-me multifunction printer that's "network ready" (ie, has an ethernet cable port.) I also got myself an asus wl-520gu router. For now the router has the factory installed firmware on it, but i could put tomato or ddwrt on it. also in my house I have a linksys router already set up with a WEP encrypted wireless SSID which me and my 5 roommates share. I guess for the purpose of this post we can call that network "Kermit" and pretend it has password "ilovepiggy" This router sits on the second floor landing in our three story house. My printer and this asus is going to be in my room, which is on the first floor. I'd like to
a) get better signal strength/speed in my room
b) network my printer so that I and others can print to it / scan from it wirelessly over the network. Can I do both things? and what would that setup be like? Would it mean making the ASUS a wireless repeater? at what point in the process and how do I add the printer?
Sending WiFi signal about 1/4 mile from my home to where my daughter lives so she can use her Samsung Galaxy2 Tablet on WiFi.There are homes, condos and trees in between us, so it is not a clear path.So far this is what I have done.I am using a modem and a Netgear WNR834B Wireless N Router.I connected a Hawkins Laptop Extender (HWREN Wireless 150N Mini Extender * single antenna outlet) into the router and connected a WiFi cable from the Hawkins to my tower outside above my roof and have attached a 10 dbi gain Trendnet antenna (omnidirectional) to the cable.But still the WiFi signal doesn't seem to be very strong at all when I test with my phone.And obviously, my daughters tablet does not see my router when she has her tablet search for WiFi.I also tried a 14dbi WIfi ASUS directional antenna and basically came up with the same outcome... she could not see the WiFi signal..My daughter lives in a condo and is not capable or allowed to install any outside antenna system whatsoever.
View 2 Replies View RelatedI purchased an apple airport extreme router to replace a linksys wireless G router. I have 2 linksys REl000 wireless N range extenders on tv and laptop. The router is working and sending out a signal, but the signal is not coming through the range extenders.
View 1 Replies View RelatedI have a WAP 4400n and need to expand the range.Linksys support suggested WAP200 to repeat the signal, but I am probably missing something, because its not working.WAP200 can see the WAP4400n, recognizes its MAC adress, but does not work.Anything to set on the WAP4400n to let the signal to be repeated?
View 11 Replies View Related