We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 RepliesIs it possible to have ASDM and SSH authenticate via different means on a RADIUS server? In particular, I have a single aaa-server group that's used for both ASDM and SSH, but I want to limit ASDM access to only a particular group in Active Directory (for example). I looked at various different requests (from the server's perspective) to see if there was a way that they (ASDM requests and SSH requests) were differentiated but was unable to find any. It would be ideal if there was something inherent about the RADIUS request coming from ASDM vs SSH so that I could build that decision making into the RADIUS server.I know I could do this by just using a different aaa-server group for each access method, but I want to avoid that if possible.
View 7 Replies View RelatedWhat is the maximum number of supported RADIUS servers on the Flex 7500 Cloud Controller?
View 2 Replies View RelatedI have been trying to set this up for like 4 hours. What a waste of time. This should be as easy as punching in the IP and password for the radius server. It isn't.I have a brand new SG-300-10. LATEST firmwawre, I just updated it about 5 minutes ago. 1.2.7.6 I think.This is what I have done so far in the GUI: (I have CLI access too if necessary)
Security > RADIUS and entered my radius IP/secret there.
Security > Access Management Profiles > Create new template called ALL that permits access to all applications. Set it as active also.
Security > Management Access Authentication > For HTTP and SSH
I put RADIUS first then Local second.My radius server works. As I type this message I am logging in via radius with OpenBSD/Centos even Fedora. (If OpenBSD can do it, these switches can do it.)But whenever I try to login with RADIUS credentials to my switch, I get no logs or any connectivity reports on my radius server? Is the switch even attempting to contact the server? The logs dont show anything regarding RADIUS. I am trying a reboot now, but I don't think that should be necessary.Is there a step I missed? When first looking at this I expected it to be done in 5 minutes. I have been on this for lik 4 hours. Isimply want to login to the administration console (web gui) using RADIUS credentials.
I am transitioning from RADIUS auth to local auth and i don't want to hassle everyone to change in one hit.If i can get auth requests to look in the WLC local net db first and if not found try RADIUS then this is what i am after! You can easily do it with web auth but doesnt seem so easy via WPA2 method.
View 1 Replies View RelatedI'm trying to use 802.1x to authenticate clients on my network with dynamic VLAN assignment from RADIUS. We have IP-Phones(powered by PoE) that only supports EAP-MD5, and we would rather use MAB(it also uses LLDP-MED for some settings) to authenticate the phones using the MAC-range from the phones vendor. The following scenario works perfect:Connect the phone and let it boot up(takes a while) and authenticate with MAB.Connect a computer in the phones data-port and let it authenticate with 802.1x(or fail and reach guest-vlan) However, the following scenario doesn't work:The computer is already connected to the phoneThe phone is then connected to the switch What happends now is that the computer is authenticated using 802.1x before the phone boots up and get's authenticated with MAB. When the phone is ready, it's authenticated with MAB and everything works. However, after a short period(let's say a minute), using `debug authentication all`, we see a "NEW LL MAC: phones mac" message(which is weird since the mac has already been MAB-authenticated), and then we are unable to contact the phone using ping. When I check `show mac address-table` it has now moved the mac from `Port Gi 0/12` to `Port Drop`. However, if I check `show mab interface Gi 0/12` or `show authentication sessions` it lists the phones-mac as `mab auth sucess `.why the first scenario works, and not the second?
The switch is a 3560E PoE 24p with IOS 12.2.58SE2. Sample of the switch-config: network-policy profile 1voice vlan 90!interface GigabitEthernet0/12switchport mode accessnetwork-policy 1authentication control-direction inauthentication event fail retry 1 action authorize vlan 60authentication event server dead action authorize vlan 60authentication event no-response action authorize vlan 60authentication event server alive action reinitializeauthentication host-mode multi-domainauthentication order mab dot1xauthentication priority mab dot1xauthentication port-control autoauthentication periodicauthentication violation replacemabdot1x pae authenticatordot1x timeout tx-period 5dot1x max-reauth-req 1spanning-tree portfast!Btw, when we tried authenticating the phones using 802.1x too (EAP-MD5), there are NO problems in any of the scenarios. However, we want to use MAB instead of 802.1x to avoid the requirement of configuring the phones with a username and password. The RADIUS response was the same when using 802.1x as it is with MAB for the phones (including device-traffic-class=voice AV-pair).
I'm using a radius server to authenticate ssh when connecting to my company's switches (a 3560 + several 2960s).
Everywhere I've looked claims that using the line 'transport input ssh' in my switch config should disable telnet access and allow ssh only. But after changing 'transport input ssh telnet' to 'transport input ssh' I can still connect to all of the switches from telnet. I can't block telnet with ACLs either because my company uses a telnet based terminal client to do most of their work.
I don't have much experience with radius. How do I stop telnet connections when using radius to authenticate?
how can I change a computer from one network to other in order to use FTP server
View 4 Replies View RelatedI am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
View 9 Replies View RelatedI want to know if its nessary to install Certificate authority on your radius server. If we have a CA server already in the domain can we use that for this purpose or we have to install certificate authority on our DC.
View 1 Replies View RelatedBelow is he output from debug radius authentication from my AP.
I can see request is forwarding from AP to radius but Radius is not sending any response.Not sure why its not responding.
I also did not under stand few out outputs also
no sg in radius-timers and
RADIUS/DECODE: parse response no app start; FAIL
what does it mean.
I restarted radius server , changed secret key but no luck.
019639: May 1 16:15:08.727: RADIUS: User-Name [1] 32 "host/3KYGRH1.idcap.intdata.com"
019640: May 1 16:15:08.727: RADIUS: Framed-MTU [12] 6 1400
019641: May 1 16:15:08.727: RADIUS: Called-Station-Id [30] 16 "0012.01d6.f691"
[Code]...
I am not sure what I am trying to do is possible, so I thought I would pose the question on here. In ACS 5.3, I would like to use an RSA server and AD to authenticate my network devices. So when I log into a router or switch I would enter my AD username, be prompted for my RSA token, then when I enable be prompted for my AD password, or visa versa. how to write an access policy to achive this?
View 2 Replies View Relatedi am trying to connect clients to my AP1231 which is running C1200 Software (C1200-K9W7-M), Version 12.3(8)JED. Client authentication is against RADIUS server. [code]
View 3 Replies View Relatedhow to set up 2008 (NPS and NASs) RADIUS Server for 802.1X Wireless clients.
View 1 Replies View RelatedWe have recently installed Cisco for our wireless solution. We are an education and are looking to let staff and pupils bring their own devices. The route that we are planning to take to let them join the school's WiFi is to implement a RADIUS server so that they can authenticate with their Active Directory username and password. I have tried to test the solution but so far without any success. I am using a Windows Server 2008 R2 as my NPS server, I have setup the Cisco controller as per below:
Security Tab | RADIUS | Authentication - I added my windows server there and the preshared key, the Network User and Management is ticket and the server responds to a ping command,In the WLANs Tab, I selected my test WLAN and under Security | AAA Servers I selected the RADIUS server that I configured in the Security TabI then try to logon to my test WLAN and on the Cisco WLAN controller I get the following error: AAA Authentication Failure for UserName:test User Type: WLAN USER
Before trying to tinker with policies on the Windows Server I was wondering if the RADIUS is correctly setup on the Controller or have I missed something obvious?
I am trying to connect an AP541N to a radius server for Domain authentication but cannot figure out how to Configure the widows 2008 Radius server to authenticate users but cannot seem to get the AP541N to do this, how to configure both the 2008 radius server and also the AP541N?
View 2 Replies View RelatedI am trying to follow the Fips guide for the WLC5508 and it wants to encrypt the connection to the Radius, either with PSK key wrap or IPsec. I have the options for Ipsec only as the Windoes NPS does not support Key wrap from what a previous user confirmed for me here on the board.. But then found another post that states that the 5508 does not support IPsec?
View 5 Replies View RelatedI would like to know if microsoft 2008 server RADIUS server could be use for authentication on Cosco 5508 instead of Cisco ACS.
View 4 Replies View RelatedRecently, I set a ASA5505 with Ipsec VPN. And I try AAA authenticate with internal Windows 2008 server. As docuemnt I read, I configure from ASDM authentication with "NT Domain". And then point to internal DC, which is Windows 2008 server. While I test it, it shows error
"Authentication test to host 192.168.xxx.xxx failed. Following error occurred -- ERROR: Authentication server not responding. No Error"
I have a ACS 4.2 under windows, I setuped it to authenticate routers by RADIUS and TACACS+ protocols. now I have some devices whitch know only LDAP protocol. How can setup ACS as a ldap server to authenticate those devices?>
View 1 Replies View RelatedI have successfully set up a windows 2008 box as a Radius server and use it to authenticate VPN users against ta AD database.I have also set up a similar policy that permits authentication for management purposes to all my networking devices (routers,switches and the ASA).Both policies work fine.Of course I don't want every VPN user to have administrative access to the ASA and every other device on my network.How can I discriminate between the 2 groups (VPN users and Network administrators)
View 3 Replies View RelatedSince I moved our WLC Controller ( 5508 ) from Version 7.0 to Version 7.2.111.3 I got above failure messages. Until now I changed the radius timeout from 2 to 10 seconds and also I disabled the aggressive failover without success. What else it could be ?
View 3 Replies View RelatedAttempting to configure Linksys e4200 router in WPA2 Enterprise mode. Got this setup fine when using the Linksys WRVS4400N (That is until it died on me, RIP circa 2 months ago). I’m getting nothing in the NPS logs, nothing when doing a PCAP at the radius server. It appears this router isn’t communicating to the NPS/Radius server.
View 6 Replies View RelatedAny free radius server for lab purpose?
View 5 Replies View RelatedDoes anyone have or know of a tried and true method of configuring a Windows Server 2008 box to provide authentication/accounting services for Cisco devices. I've read a few websites already and a lot of them seem to be geared toward VPN and some of the settings each site goes through are different.I've got NPS installed and a RADIUS client configured with the shared key. Right now I'm in the process of creating the Network Policy which only allows a Windows "admin" group to log in. Curious about the "Constraints" section where the NAS Port Type is selected and the "Settings" section where the service-type and vendor specific options are configured.
View 18 Replies View RelatedHow to configure Radius server on router in packet tracer
View 1 Replies View Relatedi have problem with my 3 new cisco AP1252AG and Radius server (windows 2000 IAS).On the 3 AP, i have two ssid :,One with Wpa pre-shared key,the other one with EAP/radius,the one with preshared key works well but the other have some trouble, here is the error message ,i have check the shared secret in radius and ap and it's ok.The error appears randomly.
View 1 Replies View Relatedwhich is the best RADIUS server for 802.1x wired authentication?
View 1 Replies View RelatedI am trying to configure a WAP4410N, with latest firmware, for disabled security (i.e.: no WEP/WPA, user passwords etc) but enable MAC authentication control using RADIUS.If I test the WAP using disabled security and disabled authentication control, the WAP works fine. When I enable the RADIUS MAC authentication (ensuring I have entered the correct RADIUS server details) nothing happens, the WAP connection just fails. Also, the RADIUS server doesn't log any attempts from the WAP to connect.Is there a known problem with this WAP simply not working with RADIUS under this configuration?
View 1 Replies View RelatedI am testing a Aironet1040 in AP setting. During the process of trial run of GUI on this 1040, I saw a local radius setting and it can set something like FAST-EAP.
Is it after using this setting (plus other steps), I can set this Aironet1040 as an AP with the capability of simple Radius Server for authentication purpose?
If not by this way as I mentioned above, can Aironet1040 be set as simple Radius Server? This is because if it can set as simple Radius Server and not need to work with an external Radius Server, that would be great and save trouble to find another server.
I am currently trying to get eap-tls user certificate based wireless authentication working. The mismatch of guides im trying to follow has me coming up trumps with success so far.
My steps for radius:- (i think this part ive actually got ok) [URL]
Steps for the wireless profile on a win 7 client:- this has me confused all over the place [URL]
My 1130 Config:-
[code]
Current configuration : 3805 bytes
!
! Last configuration change at 11:57:56 UTC Fri Jan 25 2013 by apd
[Code].....
I have a 2811 router and how to configure a RADIUS server using the CLI.
View 3 Replies View RelatedWe are retiring our current radius server. It is windows 2003 IAS server (also a DC) that we use for 802.1X authentication. We are moving to server 2008r2. I have already installed NPS and Network Authentication services on the server.
On the existing IAS server I exported the settings (using iasmig reader.exe) and was able to import the profiles (I see the 5500 as a radius client etc) Our 5500 is still pointing to the old server.
Is it as simple as changing the ip of the RADIUS server to point to the new server? It looks like I actually have to add the new server and create a new pres hared key on the NPS server but only find documents on adding a new 5500 (vs flipping it to a new NPS server).