Cisco :: Possible To Have ASDM And SSH Authenticate Via Different Means On RADIUS Server
Apr 3, 2013
Is it possible to have ASDM and SSH authenticate via different means on a RADIUS server? In particular, I have a single aaa-server group that's used for both ASDM and SSH, but I want to limit ASDM access to only a particular group in Active Directory (for example). I looked at various different requests (from the server's perspective) to see if there was a way that they (ASDM requests and SSH requests) were differentiated but was unable to find any. It would be ideal if there was something inherent about the RADIUS request coming from ASDM vs SSH so that I could build that decision making into the RADIUS server.I know I could do this by just using a different aaa-server group for each access method, but I want to avoid that if possible.
View 7 Replies
ADVERTISEMENT
Feb 5, 2013
We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies
View Related
Jan 30, 2013
I have been trying to set this up for like 4 hours. What a waste of time. This should be as easy as punching in the IP and password for the radius server. It isn't.I have a brand new SG-300-10. LATEST firmwawre, I just updated it about 5 minutes ago. 1.2.7.6 I think.This is what I have done so far in the GUI: (I have CLI access too if necessary)
Security > RADIUS and entered my radius IP/secret there.
Security > Access Management Profiles > Create new template called ALL that permits access to all applications. Set it as active also.
Security > Management Access Authentication > For HTTP and SSH
I put RADIUS first then Local second.My radius server works. As I type this message I am logging in via radius with OpenBSD/Centos even Fedora. (If OpenBSD can do it, these switches can do it.)But whenever I try to login with RADIUS credentials to my switch, I get no logs or any connectivity reports on my radius server? Is the switch even attempting to contact the server? The logs dont show anything regarding RADIUS. I am trying a reboot now, but I don't think that should be necessary.Is there a step I missed? When first looking at this I expected it to be done in 5 minutes. I have been on this for lik 4 hours. Isimply want to login to the administration console (web gui) using RADIUS credentials.
View 5 Replies
View Related
Sep 8, 2011
I am transitioning from RADIUS auth to local auth and i don't want to hassle everyone to change in one hit.If i can get auth requests to look in the WLC local net db first and if not found try RADIUS then this is what i am after! You can easily do it with web auth but doesnt seem so easy via WPA2 method.
View 1 Replies
View Related
Apr 11, 2013
I'm trying to use 802.1x to authenticate clients on my network with dynamic VLAN assignment from RADIUS. We have IP-Phones(powered by PoE) that only supports EAP-MD5, and we would rather use MAB(it also uses LLDP-MED for some settings) to authenticate the phones using the MAC-range from the phones vendor. The following scenario works perfect:Connect the phone and let it boot up(takes a while) and authenticate with MAB.Connect a computer in the phones data-port and let it authenticate with 802.1x(or fail and reach guest-vlan) However, the following scenario doesn't work:The computer is already connected to the phoneThe phone is then connected to the switch What happends now is that the computer is authenticated using 802.1x before the phone boots up and get's authenticated with MAB. When the phone is ready, it's authenticated with MAB and everything works. However, after a short period(let's say a minute), using `debug authentication all`, we see a "NEW LL MAC: phones mac" message(which is weird since the mac has already been MAB-authenticated), and then we are unable to contact the phone using ping. When I check `show mac address-table` it has now moved the mac from `Port Gi 0/12` to `Port Drop`. However, if I check `show mab interface Gi 0/12` or `show authentication sessions` it lists the phones-mac as `mab auth sucess `.why the first scenario works, and not the second?
The switch is a 3560E PoE 24p with IOS 12.2.58SE2. Sample of the switch-config: network-policy profile 1voice vlan 90!interface GigabitEthernet0/12switchport mode accessnetwork-policy 1authentication control-direction inauthentication event fail retry 1 action authorize vlan 60authentication event server dead action authorize vlan 60authentication event no-response action authorize vlan 60authentication event server alive action reinitializeauthentication host-mode multi-domainauthentication order mab dot1xauthentication priority mab dot1xauthentication port-control autoauthentication periodicauthentication violation replacemabdot1x pae authenticatordot1x timeout tx-period 5dot1x max-reauth-req 1spanning-tree portfast!Btw, when we tried authenticating the phones using 802.1x too (EAP-MD5), there are NO problems in any of the scenarios. However, we want to use MAB instead of 802.1x to avoid the requirement of configuring the phones with a username and password. The RADIUS response was the same when using 802.1x as it is with MAB for the phones (including device-traffic-class=voice AV-pair).
View 2 Replies
View Related
Dec 18, 2011
I'm using a radius server to authenticate ssh when connecting to my company's switches (a 3560 + several 2960s).
Everywhere I've looked claims that using the line 'transport input ssh' in my switch config should disable telnet access and allow ssh only. But after changing 'transport input ssh telnet' to 'transport input ssh' I can still connect to all of the switches from telnet. I can't block telnet with ACLs either because my company uses a telnet based terminal client to do most of their work.
I don't have much experience with radius. How do I stop telnet connections when using radius to authenticate?
View 5 Replies
View Related
Nov 10, 2011
I am not sure what I am trying to do is possible, so I thought I would pose the question on here. In ACS 5.3, I would like to use an RSA server and AD to authenticate my network devices. So when I log into a router or switch I would enter my AD username, be prompted for my RSA token, then when I enable be prompted for my AD password, or visa versa. how to write an access policy to achive this?
View 2 Replies
View Related
Jan 9, 2013
Recently, I set a ASA5505 with Ipsec VPN. And I try AAA authenticate with internal Windows 2008 server. As docuemnt I read, I configure from ASDM authentication with "NT Domain". And then point to internal DC, which is Windows 2008 server. While I test it, it shows error
"Authentication test to host 192.168.xxx.xxx failed. Following error occurred -- ERROR: Authentication server not responding. No Error"
View 3 Replies
View Related
Sep 1, 2011
I have a ACS 4.2 under windows, I setuped it to authenticate routers by RADIUS and TACACS+ protocols. now I have some devices whitch know only LDAP protocol. How can setup ACS as a ldap server to authenticate those devices?>
View 1 Replies
View Related
Jul 17, 2012
I have successfully set up a windows 2008 box as a Radius server and use it to authenticate VPN users against ta AD database.I have also set up a similar policy that permits authentication for management purposes to all my networking devices (routers,switches and the ASA).Both policies work fine.Of course I don't want every VPN user to have administrative access to the ASA and every other device on my network.How can I discriminate between the 2 groups (VPN users and Network administrators)
View 3 Replies
View Related
May 1, 2012
Any free radius server for lab purpose?
View 5 Replies
View Related
Jan 25, 2012
Does anyone have or know of a tried and true method of configuring a Windows Server 2008 box to provide authentication/accounting services for Cisco devices. I've read a few websites already and a lot of them seem to be geared toward VPN and some of the settings each site goes through are different.I've got NPS installed and a RADIUS client configured with the shared key. Right now I'm in the process of creating the Network Policy which only allows a Windows "admin" group to log in. Curious about the "Constraints" section where the NAS Port Type is selected and the "Settings" section where the service-type and vendor specific options are configured.
View 18 Replies
View Related
Oct 15, 2012
How to configure Radius server on router in packet tracer
View 1 Replies
View Related
Jun 8, 2011
i have problem with my 3 new cisco AP1252AG and Radius server (windows 2000 IAS).On the 3 AP, i have two ssid :,One with Wpa pre-shared key,the other one with EAP/radius,the one with preshared key works well but the other have some trouble, here is the error message ,i have check the shared secret in radius and ap and it's ok.The error appears randomly.
View 1 Replies
View Related
Oct 27, 2011
I have a server that I need to open up some ports on to allow access to the new internal Sharepoint server we're setting up. I've been having some issues getting the ports open like once I put the commands in and save them that server suddenly stops allowing outbound traffic. After looking at a few things I noticed while I was looking at the config file that the ASDM location is showing 2 IP's, both are the same as the server I'm trying to open ports for one being the private IP and the other is the public IP I'm trying to use. Is this the reason I'm having problems when I try to open those ports to my server? Do I need to use both a different private and public IP for this server so I can get my ports to work? The programmers selected these IP's so if I need to change them I'll let them know in case they need to make changes for the Sharepoint setup. This is on an ASA 5505.
View 12 Replies
View Related
Sep 2, 2012
which is the best RADIUS server for 802.1x wired authentication?
View 1 Replies
View Related
May 13, 2013
I am trying to configure a WAP4410N, with latest firmware, for disabled security (i.e.: no WEP/WPA, user passwords etc) but enable MAC authentication control using RADIUS.If I test the WAP using disabled security and disabled authentication control, the WAP works fine. When I enable the RADIUS MAC authentication (ensuring I have entered the correct RADIUS server details) nothing happens, the WAP connection just fails. Also, the RADIUS server doesn't log any attempts from the WAP to connect.Is there a known problem with this WAP simply not working with RADIUS under this configuration?
View 1 Replies
View Related
Mar 7, 2012
I am testing a Aironet1040 in AP setting. During the process of trial run of GUI on this 1040, I saw a local radius setting and it can set something like FAST-EAP.
Is it after using this setting (plus other steps), I can set this Aironet1040 as an AP with the capability of simple Radius Server for authentication purpose?
If not by this way as I mentioned above, can Aironet1040 be set as simple Radius Server? This is because if it can set as simple Radius Server and not need to work with an external Radius Server, that would be great and save trouble to find another server.
View 5 Replies
View Related
Jan 24, 2013
I am currently trying to get eap-tls user certificate based wireless authentication working. The mismatch of guides im trying to follow has me coming up trumps with success so far.
My steps for radius:- (i think this part ive actually got ok) [URL]
Steps for the wireless profile on a win 7 client:- this has me confused all over the place [URL]
My 1130 Config:-
[code]
Current configuration : 3805 bytes
!
! Last configuration change at 11:57:56 UTC Fri Jan 25 2013 by apd
[Code].....
View 14 Replies
View Related
Oct 28, 2012
I have a 2811 router and how to configure a RADIUS server using the CLI.
View 3 Replies
View Related
Nov 19, 2012
We are retiring our current radius server. It is windows 2003 IAS server (also a DC) that we use for 802.1X authentication. We are moving to server 2008r2. I have already installed NPS and Network Authentication services on the server.
On the existing IAS server I exported the settings (using iasmig reader.exe) and was able to import the profiles (I see the 5500 as a radius client etc) Our 5500 is still pointing to the old server.
Is it as simple as changing the ip of the RADIUS server to point to the new server? It looks like I actually have to add the new server and create a new pres hared key on the NPS server but only find documents on adding a new 5500 (vs flipping it to a new NPS server).
View 9 Replies
View Related
Mar 6, 2013
Can the 2504 WLC be configured to work with one RADIUS Server for Authentication of Management Users and with a second server for 802.1x EAP-TLS certificate authentication for the end users.
Management Users will authenticate on RADIUS Server 1.Wireless End users will request 802.1x EAP-TLS authentication certificate from AAA server 2.
View 5 Replies
View Related
May 18, 2011
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
View 2 Replies
View Related
Apr 7, 2013
Is there any way to set up our ISE to provide Radius instead of acting as Radius Proxy? In our Company we use ACS 4.2 to provide AAA via Tacacs+ and this works proper with all our Cisco-Switches. Now we are testing the ISE 1.1.1 as NAC-Solution.
I know how to set up the ISE as 'Radius Proxy', configuring the Sequences and Policies, but till now we are using only Tacacs+ for AAA. The current version of ISE does not support Tacacs+ and I don't want to set up a Radius-enviroment in ACS if not necessary. Somewhere ( I think the specs) I read, the ISE is a merge of ACS and NAC. So in my Opinion there should be a way to provide AAA via Radius on the ISE without ACS and without 'Radius Proxy'.
View 2 Replies
View Related
Jan 30, 2013
I am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
View 9 Replies
View Related
Dec 11, 2011
I'm using an ASA version 8.4.2 and a Radius Server.
Is-it possible to configure ASA for sending the name of the connection profile to the Radius Server ?
By default, the radius server doesn't receive this information.
View 1 Replies
View Related
Jul 12, 2012
I want to know if its nessary to install Certificate authority on your radius server. If we have a CA server already in the domain can we use that for this purpose or we have to install certificate authority on our DC.
View 1 Replies
View Related
Apr 30, 2012
Below is he output from debug radius authentication from my AP.
I can see request is forwarding from AP to radius but Radius is not sending any response.Not sure why its not responding.
I also did not under stand few out outputs also
no sg in radius-timers and
RADIUS/DECODE: parse response no app start; FAIL
what does it mean.
I restarted radius server , changed secret key but no luck.
019639: May 1 16:15:08.727: RADIUS: User-Name [1] 32 "host/3KYGRH1.idcap.intdata.com"
019640: May 1 16:15:08.727: RADIUS: Framed-MTU [12] 6 1400
019641: May 1 16:15:08.727: RADIUS: Called-Station-Id [30] 16 "0012.01d6.f691"
[Code]...
View 4 Replies
View Related
Apr 22, 2011
I was just wondering if it was possible to turn a cisco 887 Router into a RADIUS Server. What i wanted to do was setup my wireless AP to authenticate using RADIUS, but didn't want to setup another server for the purpose.
View 1 Replies
View Related
Aug 13, 2012
I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type >en.Then the enable password.
View 1 Replies
View Related
Oct 26, 2009
Wondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?
View 8 Replies
View Related
Jan 9, 2013
i am trying to connect clients to my AP1231 which is running C1200 Software (C1200-K9W7-M), Version 12.3(8)JED. Client authentication is against RADIUS server. [code]
View 3 Replies
View Related
Sep 25, 2012
how to set up 2008 (NPS and NASs) RADIUS Server for 802.1X Wireless clients.
View 1 Replies
View Related
