Cisco AAA/Identity/Nac :: 5508-WLC Using MS NPS As RADIUS Server For EAP-TLS
May 18, 2011
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
View 2 Replies
ADVERTISEMENT
Jan 30, 2013
I am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
View 9 Replies
View Related
May 22, 2013
We are experiencing a lot of these RADIUS failed to respond messages on our WLC's leading to a lot of RADIUS server hopping within the WLC.We are using Cisco 5508's, 1142 AP's and a Microsoft NPS RADIUS backend. SSID is WPA2+802.1xThe first workaround to this problem was to disable aggressive failover on the WLC. But this is only a temporary fix, because in the end, there will be more than 3 consequetive clients, failing to authenticate to the WLAN network. As a result, the WLC will swap to the 2nd RADIUS server configured.When we dived into this a little bit more we saw the following messages being logged on the RADIUS backend at the time we saw the RADIUS messages on the WL:Event ID: 6274: Network Policy Server discarded the request for a user.
View 16 Replies
View Related
Jan 23, 2013
I am trying to follow the Fips guide for the WLC5508 and it wants to encrypt the connection to the Radius, either with PSK key wrap or IPsec. I have the options for Ipsec only as the Windoes NPS does not support Key wrap from what a previous user confirmed for me here on the board.. But then found another post that states that the 5508 does not support IPsec?
View 5 Replies
View Related
Apr 28, 2013
I would like to know if microsoft 2008 server RADIUS server could be use for authentication on Cosco 5508 instead of Cisco ACS.
View 4 Replies
View Related
Sep 18, 2011
Since I moved our WLC Controller ( 5508 ) from Version 7.0 to Version 7.2.111.3 I got above failure messages. Until now I changed the radius timeout from 2 to 10 seconds and also I disabled the aggressive failover without success. What else it could be ?
View 3 Replies
View Related
Apr 7, 2013
Is there any way to set up our ISE to provide Radius instead of acting as Radius Proxy? In our Company we use ACS 4.2 to provide AAA via Tacacs+ and this works proper with all our Cisco-Switches. Now we are testing the ISE 1.1.1 as NAC-Solution.
I know how to set up the ISE as 'Radius Proxy', configuring the Sequences and Policies, but till now we are using only Tacacs+ for AAA. The current version of ISE does not support Tacacs+ and I don't want to set up a Radius-enviroment in ACS if not necessary. Somewhere ( I think the specs) I read, the ISE is a merge of ACS and NAC. So in my Opinion there should be a way to provide AAA via Radius on the ISE without ACS and without 'Radius Proxy'.
View 2 Replies
View Related
Oct 26, 2009
Wondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?
View 8 Replies
View Related
Apr 22, 2011
I was just wondering if it was possible to turn a cisco 887 Router into a RADIUS Server. What i wanted to do was setup my wireless AP to authenticate using RADIUS, but didn't want to setup another server for the purpose.
View 1 Replies
View Related
Apr 24, 2013
I am using CiscoSecure ACS v4.2 appliance, in there any way that RADIUS logs upload to FTP server because it has limitation to store RADIUS logs.
View 15 Replies
View Related
May 1, 2013
I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).In monitoring and reports the users have green color , but the clients cannot send data. Auth method is CHAP/MD5.
Allowed protocols are set to CHAP and PAP only.
View 5 Replies
View Related
Apr 13, 2011
I can authenticate between our MDS 9216i switch and RSA radius server but my role does not come across. The logged in user is a network-operator not admin. In the AV Pair i have defined shell:role*network-admin but it doesnt seem to come across
View 4 Replies
View Related
Apr 21, 2013
I have a couple of ACS 5.2 configured as active and backup and I am doing dot 1x authentication using these servers . I have configured the switch with the bellow configuration.
radius-server host 10.0.10.15 auth-port 1645 acct-port 1646
radius-server host 10.0.10.16 auth-port 1645 acct-port 1646
radius-server key 7 aaaaaaaaaaaaaa
please help to understand what will happen in switch
1) in case of primary failure
2)in case if primary returns alive .
View 8 Replies
View Related
Mar 12, 2013
I am trying to install Radius server for a cisco 2801 router. I am not able to configure it properly.
View 2 Replies
View Related
Aug 26, 2007
I tried to authenticate and authorized Nokia/checkpoint Nortel/AD3 and Nortel 5510 platform using an 4.1 for windows ACS. the ACCESS-REQUEST is well processed bi the radius server wich send ACCESS-ACCEPT to the AAA Client (ie NORTEL or NOKIA), but i'have got privilege access denied on the Client side. RADIUS IETF Dictionnary is used for every device. all others Cisco Devices authenticate and are well authorized.
View 3 Replies
View Related
Feb 3, 2007
We have several ASA 5510 firewalls which are being used as VPN gateways.RSA SecurID is the authentication mechanism using native SDI connectivity. No ACS server is being used.Is it possible to assign user Group and other attributes (such as ACL), using the SecurID RADIUS server? I know this is what the Cisco ACS is for, but is it possible using the RSA RADIUS server itself?
View 11 Replies
View Related
Apr 20, 2005
I am configuring TACACS Authentication on Cisco 3550 switch .It has Version 12.2(25)SEA IOS image. A strange thing is happening, whenver I am enabling AAA new-model on this switch, and then after enabling I see ruuning-config . It shows me this
tacacs-server host x.x.x.x
tacacs-server host x.x.x.x
no tacacs-server directed-request
tacacs-server key 7 xxxxxx
radius-server source-ports 1645-1646
* included here to hide the specific information I dint specified any RADIUS server , why it is showing me radius-server source-ports 1645-1646 after enabling AAA New-Model As soon as i give "no aaa new-model", this parameter also vanishes. I think this is the only reason I am not able to do tacacs authentication.
View 9 Replies
View Related
Nov 14, 2012
We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image 12.2(55)SE6 having following configuration.We do not know whether we configured switch in proper way or do we need to modify it. [code]
View 5 Replies
View Related
Apr 29, 2011
I installed NGS 2.0.2 for wireless guest user management and authentication. I implement webauth via webauth page on wlc deployed.One Branch with a WLC5508 version 7.0 wireless anchor controller is working on the NGS.But now I integrate next branch with WLC4402 version 6.0.188 and the authentication of users at the new branch gets an error, wrong user/password.
I double checked configuration and user/password but I can't find any configuration error. Also stopping and starting of radius service and reboot of NGS still does not work. I tried to debug the radius via web interface and watched for the loggfile and there is still a reject.I also tried the freeradius command radiusd -X but I got an error when starting the radiusd -X.
1.) How can I figure out, if I will get the correct password from my WLC ? Are there any debug options to see more ? e.g. some cli commands, radiustest utilities or how to get the received password from the chap challenge of the debug ?
2.) I have appended a part from my radius loggfile. How can I find the detailed error in the radius log file? Is it correct that the password in the debug file is empty ? raiuds logg line "[radius-user-auth] expand: %{User-Password} -> "
View 3 Replies
View Related
Oct 20, 2012
We are currently evaluating ISE and I am stuck with the PEAP authentication (with Server side Cert).Our current setup consists of two 5508 controllers, 30+ access point. For authentication we are using PEAP with (server side Cert). We have an IAS server which is also acting as a CA server. We are using Cisco’s NAM as a supplicant on Windows XP & 7 workstations. I would like to use ISE for authentication. I would like to use PEAP with Server side Cert (similar setup like IAS). I want ISE to perform the same function in addition to profiling etc.....
I was able to integrate ISE with Active Directory but could not get it working with PEAP (server side Cert). I would also like to know if they used Microsoft’s CA server or Open SSL CA server or a third party CA server (Go Daddy, VeriSign etc.)Can you we ISE as a CA server just the way we used Microsoft’s IAS Server as a CA Server?
View 8 Replies
View Related
Apr 10, 2013
Cisco WLC 5508
Software Version: 7.4.100.0
Windows Server 2008R2
I've got everything setup on the Windows Server 2008 side of things (certificates, radius clients, etc). I added the radius server on the WLC, and configured a new W LAN to use it. Both are on the same sub net. When trying to connect to the W LAN it kept failing. I installed wire shark on the server to monitor the radius traffic, and to my surprise there was no radius traffic showing up on the server. The radius statistics on the WLC are at 0 as well, so it's like the WLC isn't even attempting Radius.
I re verified that the server was enabled on both the security tab and the W LAN itself on the WLC. Rebooted the controller and the server, all to no avail. I used a radius test client, and can successfully send radius commands to the server using that utility. Frustrated, I just kept trying to reconnect on my wireless device, and after about the 15th try, finally I saw radius activity on wire shark. It rejected my access, but at least I saw activity. It also registered radius statistics on the WLC as well.
So now if I keep trying to connect repeatedly, about every dozen or so times the WLC actually will send a radius request to the server.
View 8 Replies
View Related
Nov 3, 2012
We are trying to integrate Cisco WLC 5508 and Microsoft NPS 2008 to allow users to use their AD username and password to authenticate to the wireless network.I basically followed the following document but with no luck (Appendix B): URL I'v went through some threads in this forum but also with no luck,Basically, we are recieving the follwoing error in NPS event viewer:A RADIUS message was received from RADIUS client a.a.a.a with an invalid authenticator. This is typically caused by mismatched shared secrets. Verify the configuration of the shared secret for the RADIUS client in the Network Policy Server snap-in and the configuration of the network access server.
View 2 Replies
View Related
Feb 1, 2012
i have configured 35 APs 3502i in 5508 WLC, now i want to get access to ap via radius. Currently i can connect to them via SSH with both user and password set in wireless> access point > global configuration, well, how do i configure the management AP user through RADIUS?
View 2 Replies
View Related
Sep 8, 2011
I am transitioning from RADIUS auth to local auth and i don't want to hassle everyone to change in one hit.If i can get auth requests to look in the WLC local net db first and if not found try RADIUS then this is what i am after! You can easily do it with web auth but doesnt seem so easy via WPA2 method.
View 1 Replies
View Related
Apr 8, 2013
I have a 5508 controller running 7.4.100 and have a WLAN where I have radius configured. On my controller the client machine I'm using appears but the radius authentication doesn't appear to be working. Is there anything on the controller I can do to verify that the request is even being sent to my Microsoft IAS server? The log on the server doesn't show any requests from the controller so my early days guess is the controller isn't actually sending it.
View 3 Replies
View Related
May 6, 2013
I'm a trainee in Network and Telecommunication, and I have to do a "model" with a controller, an AP, and a RADIUS server. Communication and configuration of the lightweight AP has been done.
I use an autonomous access point 1220 as the RADIUS server (no considering it as an AP), and I'm a beginner in RADIUS configuration. I get a "Processing AAA Error 'No Server' (-7) for mobile 00:24:d6:8f:2c:7e" when I launch a debug targetting my PC, connecting to the LAP.
Precursory : 10.137.125.71 is the IP address of the ap1220, working as the RADIUS server 10.137.125.15 is the IP address of the controller. 00:24:d6:8f:2c:7e is the MAC address of my PC, connecting to the Wi-Fi. ping works to the RADIUS, to the controller. Each devices are connected by a layer 3 Switch, and ping each others. The Wi-Fi works when I don't use 802.1X (or when I don't use RADIUS authentication at all)
What I did on the RADIUS server (ap1220 autonomous) :
aaa new-model
radius-server local
nas 10.137.125.15 key password
[Code]......
View 5 Replies
View Related
Jun 5, 2013
I have a WLAN configured with 802.1x PEAP pointing to an external RADIUS server. It works fine for the most part, but I'm having problem closing accounting sessions in RADIUS. I've found this is related to the client table in the WLC. The user session does not end in RADIUS unless the WLC officially removes the client from the db, which takes 5-6 minutes from what I can see (probably due to the default idle timeout of 300 seconds).
For example:
1. I connect my tablet to the test WLAN. It associates and authenticates successfully and the WLC sends the accounting info to my RADIUS server, opening up a user session. If I turn off the wifi in the tablet, the client entry stays in the WLC client table until it times out. The WLC removes my tablet from the client table after 5-6 minutes, and then the session closes in the accounting table. I can force the session to close much earlier by manually removing the client from the WLC.
2. Same as #1, but this time instead of turning of the wifi in the tablet, I choose to connect to a different WLAN in the WLC. The user session in the accounting DB never closes. If I reconnect back to the original test WLAN with 802.1x, it opens up yet another user session in RADIUS accounting. Now I have a "dead" user session in accounting that is going to be open forever unless I delete it from SQL.
Is this an issue with the end user client not sending the disassociation frame properly, or a config problem with the WLC? How can I make it so that every time a client drops from an AP or moves to a different WLAN, the WLC would immediately send accounting updates to my RADIUS server and close the user session properly?
View 1 Replies
View Related
Mar 18, 2013
I'm working on a project where a wi-fi client is tracked and located using RADIUS authentication requests. The problem I'm running into is that the WLC (5508) sends an RADIUS authentication request to my freeradiusd, which is ok so far, but if the client roams to another accesspoint (3602AG, 1131AG, 1252AG), the WLC does not send a further RADIUS auth. request - and the client is allowed to connect to the next ap.Is there an option like RADIUS-cache which I can disable, so that the WLC sends everytime an authentication request when a client tries to connect to an ap or roams from one ap to another one?
View 4 Replies
View Related
Dec 18, 2012
Can I use WLC 5508 with OpenLDAP directly (without radius) ?
View 1 Replies
View Related
Feb 16, 2012
I am setting up a WIFI network with a Cisco 5508 controller. I want to configure a first WIFI network (WIFI1) that will authenticate my business laptop based on the AD computer accounts and will access my corporate network.I want to setup a second WIFI network (WIFI2) that will authenticate my phones and tablets devices with AD user accounts and will be on a separate vlan with only access to the Internet.I created 2 policies on the Radius server : one that authenticate computers coming from wireless and a second one authenticating users coming from wireless.
if a user manually creates the WIFI1 network on his phone and enter his AD username, he is going to have access to the corporate network. I would like to be able to say that when a request is coming from WIFI1, only the policy for authenticating wireless devices with computer accounts will apply and the second policy authenticating user wouldn't apply.
View 1 Replies
View Related
Oct 9, 2012
I'm running version 7.2.111.3 on my WLC 5508 and I try to figure out how I can set PEAP towards my configurerd Radius servers. On my Local EAP profile I can specify PEAP, but how is it default configurerd when you just specify the radius servers on the "WLANs > Edit Test > security > AAA servers tab ?
The MS radius logs tell me that it is EAP and not PEAP, so the questions is does the WLC support Microsoft: Protected EAP ???
Dot1x_NW_MsgTask_0: Oct 10 11:02:27.279: 24:77:03:07:75:28 AAA EAP Packet created request = 0x1bd4647c.. !!!! -> should be AAA PEAP ?
*Dot1x_NW_MsgTask_0: Oct 10 11:02:27.279: 24:77:03:07:75:28 Sending EAP Attribute (code=2, length=35, id=2) for mobile 24:77:03:07:75:28*Dot1x_NW_MsgTask_0: Oct 10 11:02:27.280: 24:77:03:07:75:28 [BE-req] Radius EAP/Local WLAN 3.
View 6 Replies
View Related
Feb 5, 2013
I have a customer that wants to restrict SSIDs that groups get based on their AD credentials. Currently, he is using Windows 2008 Radius Server and AD with Cisco 5508 WLCs. I found examples that shows this is possible but my question is if I have 2 user groups (teachers and students) in AD and apply a policy for the Radius to send SSID x to teachers and SSID y to students. Upon successfully authentication, would this deny teachers access to SSID y and students access to SSID x?
View 10 Replies
View Related
Oct 30, 2011
I am currently useing ACS 5.2 and have no problem using Tacacs+ with AD access.
But with Radius it seems I can only get the Local identity store to work, need to do something special to get Radius to work with active directory with Cisco ACS?
View 10 Replies
View Related
