Cisco Wireless :: Radius Server Authentication AIR-AP1231G-A-K9
Apr 30, 2012
Below is he output from debug radius authentication from my AP.
I can see request is forwarding from AP to radius but Radius is not sending any response.Not sure why its not responding.
I also did not under stand few out outputs also
no sg in radius-timers and
RADIUS/DECODE: parse response no app start; FAIL
what does it mean.
I restarted radius server , changed secret key but no luck.
019639: May 1 16:15:08.727: RADIUS: User-Name [1] 32 "host/3KYGRH1.idcap.intdata.com"
019640: May 1 16:15:08.727: RADIUS: Framed-MTU [12] 6 1400
019641: May 1 16:15:08.727: RADIUS: Called-Station-Id [30] 16 "0012.01d6.f691"
[Code]...
View 4 Replies
ADVERTISEMENT
Jan 9, 2013
i am trying to connect clients to my AP1231 which is running C1200 Software (C1200-K9W7-M), Version 12.3(8)JED. Client authentication is against RADIUS server. [code]
View 3 Replies
View Related
Sep 2, 2012
which is the best RADIUS server for 802.1x wired authentication?
View 1 Replies
View Related
Mar 6, 2013
Can the 2504 WLC be configured to work with one RADIUS Server for Authentication of Management Users and with a second server for 802.1x EAP-TLS certificate authentication for the end users.
Management Users will authenticate on RADIUS Server 1.Wireless End users will request 802.1x EAP-TLS authentication certificate from AAA server 2.
View 5 Replies
View Related
Aug 13, 2012
I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type >en.Then the enable password.
View 1 Replies
View Related
Dec 13, 2011
In the WLC there are two groups (say A and B). How would I take group B and point it to a RADIUS server for authentication? The server is ping reachable. I have searched but did not see any definitive answer.
View 3 Replies
View Related
Jul 3, 2007
I follow step by step the link bellow to configure web-auth with external RADIUS server but I receive a error on console debug of the WLC "Returning AAA Error No Server (-7) for mobile"My Radius Server is fine, because I can authenticate on WLC Web page with RADIUS user. WLC 4402 version 4.1.171.0 [URL]
View 2 Replies
View Related
Feb 15, 2011
We have multiple RA VPN groups on a 3845 router.RADIUS authentication is currently happening between the 3845 and a single Windows 2008 server. We have a specific windows group that AD users are members of, and they are allowed to connect via VPN.
I'm creating a new RA VPN Group, which should only allow different AD users. Is it possible to create another RADIUS association to the same server, or do I need to authenticate against a different Windows server?
View 1 Replies
View Related
Jul 4, 2012
how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
View 1 Replies
View Related
Mar 28, 2012
I try to setup a 1141 aironet AP to authenticate my user through our Ms Radius Server ( Win 2008 R2).Everything is fine with small Bussiness AP WAP4410N with the following configuration:But I can't setup successfully the aironet 1141 with the same settings and getting it works.Here is my configuration for the Aironet 1141 Vlan 1 is the ssid I want to get it work with Radius.
View 1 Replies
View Related
Sep 3, 2011
I have a Cisco C1140 Ap. I have cnfigured the device. Initially for testing i used WPA and authenticated locally. I have now setup a radius server and added my AP in as a client etc. I have changed my SSID's to authenticate with the radius server and i am having issues authenticating.I can connect via a PC and an iphone. They say that i am connected but i get no ip address and the debugs.
View 1 Replies
View Related
Mar 18, 2013
I'm working on a project where a wi-fi client is tracked and located using RADIUS authentication requests. The problem I'm running into is that the WLC (5508) sends an RADIUS authentication request to my freeradiusd, which is ok so far, but if the client roams to another accesspoint (3602AG, 1131AG, 1252AG), the WLC does not send a further RADIUS auth. request - and the client is allowed to connect to the next ap.Is there an option like RADIUS-cache which I can disable, so that the WLC sends everytime an authentication request when a client tries to connect to an ap or roams from one ap to another one?
View 4 Replies
View Related
Jun 20, 2012
I configured the 2504 with 2 SSIDs for staffs and guests.I also configured the Lobby admin with web auth. But if a guest wants to connect our wireless he/she has to enter the PSK key and then only they are able to connect with the user id and password given by Lobby admin. Can we avoid this key and let the guests connect straightaway with the web auth?I’m planning to configure 802.1x & Radius dual authentication for staffs SSID..
View 5 Replies
View Related
Feb 16, 2012
I am setting up a WIFI network with a Cisco 5508 controller. I want to configure a first WIFI network (WIFI1) that will authenticate my business laptop based on the AD computer accounts and will access my corporate network.I want to setup a second WIFI network (WIFI2) that will authenticate my phones and tablets devices with AD user accounts and will be on a separate vlan with only access to the Internet.I created 2 policies on the Radius server : one that authenticate computers coming from wireless and a second one authenticating users coming from wireless.
if a user manually creates the WIFI1 network on his phone and enter his AD username, he is going to have access to the corporate network. I would like to be able to say that when a request is coming from WIFI1, only the policy for authenticating wireless devices with computer accounts will apply and the second policy authenticating user wouldn't apply.
View 1 Replies
View Related
Nov 1, 2012
Would like to check out some client side setting on Wireless 802.1x authenticaiton.
Network setup is using
- Cisco WLC 7.2 and AP3500,
- ACS 5.3
- Microsoft Windows server 2008 hosting AD and CA services (same machine)
- Client OS is Microsoft Window 7.
Authentication mehtod would use PEAP-MSChap V2 Combo.
My question :
01. In AD environment, should ACS 5.3 be part of the domain computer?
02. To have secure connectivity, IF the security policy force client to check "Validate server certificate", which certificate it is look for? Is it ACS's identity certifate, that require CA server to sign on the CSR?
03. Back to client side, should the client also need to import this certificate in trusted root certification authorities?
Or the client will trust ACS identity certificate against the root CA certificate store at client's trusted root certification authorities, where they have the identical issuer?
04. Extra question: If no CA environment, would it be sufficient simply export ACS self-signed certificate and import to client computer, and it's trusted?
View 3 Replies
View Related
Aug 1, 2012
I'm fighting for a few days now to setup the captive portal of 2 wireless access point WAP321. I was able to make it work with local user authentication but now, I want to manage my guest users on active directory. So I setup the captive portal to authentication user with NPS on Windows 2011 SBS.
The problem is that my guest SSID in not encrypted, so the NPS server do not let me login. I try to setup the NPS server like that :
Uncrypted authentification (PAP, SPAP)
Service-Type : Login
View 2 Replies
View Related
Sep 11, 2012
Can we enable ssh on 3500 /3600 APs along with use radius for login authentication? idea here is to that ssh will provide another method to access the AP for troubleshooting purposes.I know with autonomous mode APs this should not be an issue but not sure with lightweight APs.
View 2 Replies
View Related
Apr 25, 2011
I am running ASA version 8.4(1), and anyconnect version 3.0.1047. My SSL VPN works fine, but i run into an issue with one user . his account did not work , and everytime users logged in it got this message "VPN Server could not parse request".
I found the problem after getting a user information meaning his username and password. His password had "&" as one of the special characters. when we change it to something that does not have that , it works just fine.
We are using microsoft NPS server as radius. but when i run a test within CLI it works just fine, only when anyconnect asks to authenticate it fails.
View 5 Replies
View Related
Aug 6, 2012
Any software to measure Authentication time between client and Radius serverr.
View 8 Replies
View Related
Nov 22, 2011
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
View 0 Replies
View Related
Nov 14, 2011
I'm running WCS 7.0.220.0.I would like to authenticate users that are able to logon the WCS, through MS Network Policy Service (RADIUS).I would like all my domain users to be member of the local group on the WCS "Lobby Ambassador", so all domain users has access to generate guest access accounts, for the web auth... I can see under the WCS Administration under AAA that it should be able to use RADIUS - but i'm not sure how to setup the NPS policy?
View 1 Replies
View Related
Mar 10, 2011
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
View 1 Replies
View Related
Jan 3, 2013
I am configuring an old WLC4400 with V4.2.130.0. I added a new sub-interface for VLAN 50 with proper IP for the subnet and then add the Radius server(Windows server 2008 with NPS) onto WLC4400. I then created new WLAN with WPA+WPA2 Encryption and 802.1x key management and selected the Radius server under AAA for authentication.
Configured the test XP with WPA-Enterprise and PEAP as EAP method. I purposely configured computer to prompt for username and password.
When I try to connect, I did get prompt for username and password. However after that nothing happens. It seems like laptop just keep trying to authenticate.
I checked windows event log and do not see anything under NPS. I know this windows server NPS setup works as it is also the authentication server for our remotevpn.
is there any special option I need to turn on for WLC in order for Radius authentication work? Or is there any known bug with V4.2.130.
View 13 Replies
View Related
Aug 11, 2011
I'm in the process of moving some of our remote access vpn to an asa5520 and anyconnect.
The problem I've come across is that when using radius as authentication, I choose any one of my connection profiles in anyconnect and log in with any username regardless of the group on radius.
How do I map the connection profile to a group on radius so that i can separate the users?
View 1 Replies
View Related
May 17, 2011
I have a 5510 authenticating successfully with a RADIUS server. I'm using it for VPN authentication and it works great. I would also like to do this for administrator access to the ASA. When I turn it on though, any authentication for VPN access is also granted administrative access to the ASA. Obviously, I need to limit that to a select few users.
View 1 Replies
View Related
May 24, 2011
I am trying to authenticate on Juniper NSM express using cisco ACS 5.2. The request is arriving at the cisco ACS but i am getting the following error.RADIUS requests can only be processed by Access Services that are of type Network Access.
View 4 Replies
View Related
Jan 9, 2012
I am having ACS 4.0.2 in my network, which I want to use for 802.1x Radius Authentication for Clients on PEAP-MSCHAPv2 methodology.As per the documentation " EAP Authentication with RADIUS Server", Doc ID: 44844.I have configured Network Configuration and populated AAA client IP range and Secret Key.
Question1: Under Authenticate Using option, there are various RADIUS flavors available for selection. For a Non Cisco AAA client, should I select RADIUS IETF?
Question 2: In the above snap shot, It has an option called Global Authentication Setup, where we can setup EAP configuration. Under PEAP subsection there is an option to "Allow EAP-MSCHAPv2" check box.After checking that, is a restart required to the ACS Server? Would it cause any disruptions to the existing services on the ACS?
View 3 Replies
View Related
Nov 6, 2011
I am trying to setup a RV042 for a Client VPN using AD / Radius authentication. When it was purchased I saw radiuslisted as a feature on it, but I'm not seeing a way to set this up.
[URL]
I have upgraded to the latest firrmware, I have a VPN working with accounts on the router that I manually create, but am not seeing anyplace to configure radius.
View 5 Replies
View Related
Apr 8, 2013
I have a 5508 controller running 7.4.100 and have a WLAN where I have radius configured. On my controller the client machine I'm using appears but the radius authentication doesn't appear to be working. Is there anything on the controller I can do to verify that the request is even being sent to my Microsoft IAS server? The log on the server doesn't show any requests from the controller so my early days guess is the controller isn't actually sending it.
View 3 Replies
View Related
Feb 25, 2013
I have a problem with radius authentication on catalyst 2960 with freeradius as radius-server. The Catalyst is behind a HP5412zl layer3-switch. The rest of the network are hp-layer2 switches, which do radius authentication to the same radius server. The ios on the catalyst is c2960-lanbasek9-mz.150-1.SE3. Apparently there are no requests made to the radius-server, since I dont see any requests coming in. Port 0/7 is voice port with laptop behind , /port 0/8 access-port with laptop directly connected.
config :
aaa new-model
aaa authentication dot1x default group radius
dot1x system-auth-control
!
!
!
interface FastEthernet0/1
[code]....
View 1 Replies
View Related
Jan 19, 2012
I have configured a Cisco 877 router to send RADIUS requests when a user logs in to the console (Line Console or Line VTY) using the following config:
aaa new-model
aaa authentication login default group radius
aaa authentication ppp default group radius
radius-server host 10.0.0.1 auth-port 1812 acct-port 1812 key mysharedkey
When I log the RADIUS packets I see that the Cisco router is sending the initial AccessRequest using PAP.
How can I configure the router to send it's inial AccessRequest packet using CHAP?
View 5 Replies
View Related
May 6, 2013
I'm a trainee in Network and Telecommunication, and I have to do a "model" with a controller, an AP, and a RADIUS server. Communication and configuration of the lightweight AP has been done.
I use an autonomous access point 1220 as the RADIUS server (no considering it as an AP), and I'm a beginner in RADIUS configuration. I get a "Processing AAA Error 'No Server' (-7) for mobile 00:24:d6:8f:2c:7e" when I launch a debug targetting my PC, connecting to the LAP.
Precursory : 10.137.125.71 is the IP address of the ap1220, working as the RADIUS server 10.137.125.15 is the IP address of the controller. 00:24:d6:8f:2c:7e is the MAC address of my PC, connecting to the Wi-Fi. ping works to the RADIUS, to the controller. Each devices are connected by a layer 3 Switch, and ping each others. The Wi-Fi works when I don't use 802.1X (or when I don't use RADIUS authentication at all)
What I did on the RADIUS server (ap1220 autonomous) :
aaa new-model
radius-server local
nas 10.137.125.15 key password
[Code]......
View 5 Replies
View Related
Oct 31, 2010
For some reason, i can't get the lobby "sponsors" to authentication to the Guest NAC server (2.0.2) using ACS 5.2 via Radius.I was able to figure out how to get the Guest NAC Radius Authentication for "Administrator" to work by adding custom Radius value IEFT-6 under...
Policy ElementsAuthorization & permissionsNetwork AccessAuthorization Profiles
I added a policy & under the Radius Attributes Tab... I manually entered an Attribute that looks like the following:
Dictionary Type: = RADIUS-IETFRadius Attribute: = Service-TypeAttribute Type: = EnumerationAttribute Value: = StaticValue = "Administrative"
I then created an Access Policy... I looked for a specific AD group - Result = "Name of Custom Policy Above"...
All of that is working just fine.... the NAC Guest Docs tell you the Radius server must return a value of IETF-6...
When it gets into the Sponsor section, it doesn't tell you the value your Radius server should return... so just for grins, instead of "Name of Custom Policy Above", I tried "Permit Access"... i tried the "Name of Custom Policy above"... Not sure what else to try to get this to work...
here is a like to the document i'm following: URL
Page 68 refers to the "Configuring Sponsor Authentication" for Radius.. it just tell you to add the Radius Server & change the authentication order.
View 9 Replies
View Related
