Cisco VPN :: How To Configure SSL VPN On 1941 Router
Mar 22, 2011How do i configure SSL VPN on a Cisco 1941 router? I would very much want a howto guide that does step by step. I have not found one my self so far.
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Configure 1941 Router For PPPOE With Dynamic IP?
Dec 18, 2010how to configure the Cisco 1941 router for PPPOE with dynamic IP
View 10 Replies View RelatedCisco Switching/Routing :: 1941 Router GE0/1 Port Burnt And Need To Configure
Aug 29, 2012I Have a Cisco 1941 router which had its GE0/1 port burnt out and we have since plugged in a module with 4 fast ethernet ports. I need to reconfigure the router such that at least one of the Fast ethernet ports can server the purpose of the GE0/1. GE0/0 connects to our Service provider and GE0/1 connected to the inside network.Currently, while connected to one of the ethernet ports, i can telnet into the router on the address 192.168.29.1. when i'm on the router, i can ping our remote site, network address 192.168.24.0 with no problem, but when i use the command "Ping 192.168.24.0 source 192.168.29.1" there is no response.
View 1 Replies View RelatedCisco WAN :: How To Configure Loopback On 1941
Jan 28, 2013I've got some 1941 ciscos set on every branch.We have native L2 between this offices and I want to use external ip addresses on gig 0� interfaces anfdf local ip addresses on lo 0 interfaces, and use lo 0 for vpn connections.
I do:
int gig 0/0
ip add 192.168.181.14 255.255.255.0
ip nat outside
I can ping it from local network behind giga 0/1 but i can't ping it fro outside, how can i do this?
Cisco VPN :: To Configure 1941 K9 As EasyVPN Server
Jul 11, 2012I have been trying to configure Cisco1941/K9 as Easy VPN Server through CiscoCP.The tunnel comes up but I cannot pass any traffic to the secure LAN (GigEth 0/1). When the tunnel comes up, I can ping the Loopback interface and the GigEth 0/1 interface IPs.
View 21 Replies View RelatedCisco WAN :: How To Configure ADSL2+ Connection With 1941
Jan 24, 2013cofigure a ADSL2+ Conexion in an 1941 router.line protocol are up but didn't have ip adresse in my interface.[code] i don't know how i can find the probleme, and debug's comandes no show me anything.
View 3 Replies View RelatedCisco Switching/Routing :: Configure 1941 With Routed Subnet From ISP To Forward To Server
Feb 13, 2013I have some questions about how to configure my Cisco 1941 with a routed subnet from my ISP to forward them to 1 or more servers in my LAN.1 Routed subnet /29 from my ISP (over a fiber connection).In my LAN I have (at the moment) 3 servers, and about 15 clients.I would like to use the first ip address from the routed subnet for internet traffic from all the clients in the LAN.I would like to use the second ip address from the routed subnet for server1 so that server1 accept some allowed connections and that server1 connects to the internet with the second ip address from the routed subnet
I would like to use the thirth ip address from the routed subnet for server2 so that server2 accept some allowed connections and that server2 connects to the internet with the thirth ip address from the routed subnet.I would like to use the fourth ip address from the routed subnet for server3 so that server3 accept some allowed connections and that server3 connects to the internet with the fourth ip address from the routed subnet.[code]
Cisco VPN :: PAK To Activate VPN On 1941 K9 Router
Jul 1, 2012We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941. Where I can buy a valid PAK? Could it be done via on-line support?
View 5 Replies View RelatedCisco VPN :: Activating SSL On 1941 Router?
Mar 23, 2011I have got a Cisco 1941 router and would like to activate my SSL VPN license on it. How do i go about it?
View 6 Replies View RelatedCisco WAN :: What Is The Processor Available In 1941 Router
Jan 31, 2012What is the processor available in cisco 1941 router? is it RISC?
View 4 Replies View RelatedCisco WAN :: Cannot Log Into 1941 Router To Setup
Mar 28, 2011We purchased this router with the cisco IOS software installed. I've installed the Vista driver on my win 7 box. I believe that should work. I installed Putty to termainl in and I'm using a USB connection. I cannot even log into the router. I thought I was going to see some kind of setup wizard using the CISCO software so I would use a GUI and get things moving. I've got loads of reference material with command etc. but I just can't connect to the router to make it happen.
View 3 Replies View RelatedCisco WAN :: Adding IPSec To 1941 Router?
Jan 17, 2013I need to unlock IPSec to my 1941 router but I'm not sure which license(s) to purchase.
View 1 Replies View RelatedCisco WAN :: 1941 Choose Router For VPN And Eigrp
Feb 16, 2013We have software router vyatta and about 15 branches with cisco 881w and cisco 1941. All branches have 10mbs bandwidth and 3 of them have 50mbs. Link to vyatta has 100mbs bandwidth and situated in datacenter.All branches connect to vyatta via vpn site-to-site with ipsec.I want to change vyatta to cisco router or asa.
View 7 Replies View RelatedCisco WAN :: How To Break 1941 Router Password
Jun 16, 2010i have cisco 1941 router.unfortunately i dont remember password.Can any body tell me how to break password.I tried to go in Rom mon using ctr+break but nothing is happened.
View 5 Replies View RelatedCisco WAN :: 1941 Router ATM Interface Went Down While Applying QoS?
Sep 28, 2011c1900-universalk9-mz.150-1.M4.3
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO1941/K9 FCZ1510C50V
Technology Package License Information for Module:'c1900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
[code].....
Cisco WAN :: Load Balancing In Router 1941?
Nov 28, 2012i have cisco 1941 router with HWIC-4EWS Card We have two ISP, how to configure the load balancing
View 3 Replies View RelatedCisco WAN :: 1941/K9 Router Configuration For Internet?
Dec 22, 2010We configured 1941 k9 router for inernet purpose
ip name-server 218.248.255.146ip name-server 218.248.255.212multilink bundle-name authenticated!!!license udi pid CISCO1941/K9 sn FHK144773MG!!interface GigabitEthernet0/0 ip address x.x.x.x 255.255.255.248 ip nat outside ip virtual-
[Code]....
when i configured access-list 2 permit any . Internet working on local systems but we are not able to connect telnet.
Cisco WAN :: Bundling 2 Gigabitethernet In 1941 Router
Apr 7, 2011I am using cisco 1941 router in my DC for Internet service. I am going to terminate 2 WAN links each 4 mbps to my Gigabiethernet ports. Is bundling is possible to enjoy full 8 mbps internet to my organisation?
View 5 Replies View RelatedCisco WAN :: 1941 Router - CP Express Not Working After Upgrade
Aug 13, 2011I am trying to upgrade CP Express to 2.5 and after the upgrade I bring up the webpage to login and I am prompted for my credentials, I enter them and I am authenticated. However the CP Express home page never loads. I have tried to reload 2.0 but it does the same thing.
View 3 Replies View RelatedCisco Switching/Routing :: 1941 Router Cannot Get To Internet From PC On LAN
Mar 12, 2012I am having an issue accessing the internet from a PC on the LAN. I have configured the PC with the gateway of the router infront of the ISP to test. I can ping from the router to google or any other internet IP. From the PC I can ping to the GIG0/1 (Inside LAN IP) and the GIG0/0 (Outside WAN IP going to ISP) but I can't ping the Next Hop IP of the ISP or anything past that. If I do a trace route from the PC to the google IP address it hits the GIG0/1 Inside LAN IP Address but fails from there. Here is a cut down snap shot of the router configure
[code]....
Cisco Switching/Routing :: Setting Up VPN For 1941 Router?
Sep 6, 2012im having trouble setting up a vpn for a 1941 router this is what I have setup
crypto isakmp policy 10
encr aes 256
authentication pre-share
crypto isakmp key ########## address 63.247.48.50
[code]....
my whole problem comes about when i need to Nat 192.168.1.0 to 10.12.14.0/24 before it goes through the tunnel.
Cisco WAN :: 1941 - Speed Slow After Connecting To Router
Apr 6, 2013In my company bought 20 mbps lease line(ISP Line).I connect directly with my laptop and after checking it show 20 mpbs speed.If i connect cisco 1941 router and configure PAT and Its working fine but I check with speed I connect directly to another interface on my router to laptop at that it show only 8 mpbs speed.I am check with ISP person but they told its not an issue in ISP because we connect directly it show perfectly 20 mbps speed but connecting with your router at that time it show 8 mbps speed,so problem with your router configuration.
View 4 Replies View RelatedCisco WAN :: Plug HWIC-1FE On 1941 Router Running?
Feb 26, 2013I want to know if I can plug a HWIC-1F on a cisco 1941 router without shut it down?
View 1 Replies View RelatedCisco VPN :: Change Country Code On 1941 Router
May 3, 2011I am trying to install SSL VPN on our 1941 router. When i try to send a CSR for signing the site complains about the country code not being correct. How can i change the contry code in Cisco IOS Version 15.0(1r)M9 ?
It is also complaining about the domainname, but the thing right now is the contry code.
Cisco Switching/Routing :: Router 1941 But Can't Do Ipsec
Oct 10, 2012I did have a router cisco 1941 but can not do ipsec with it,i did take a smart net.
View 3 Replies View RelatedCisco WAN :: 1941 Router With PPPoE ADSL Conflict
May 3, 2013I m getting the below debug log and can not get IP from my ISP. It is static IP address and there is modem in bridge mode for the adsl line.
Below Conf and debug out put,interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 2
end
[Code]....
Cisco WAN :: 1941 - Small Router And LTE 4g Connection / Information
Jan 18, 2011Is there any small router model (like 1941) that can be ready for future 4G LTE?
View 1 Replies View RelatedCisco WAN :: Will 1941 Router Support USB Cellular Data
Jan 9, 2011The 1941 router has USB ports, Will it support a USB celluar data card?
View 5 Replies View RelatedCisco Switching/Routing :: 1941 Router Does Not Keep Config When Turned Off?
Aug 22, 2012I have a 1941 integrated services router that will not keep the configs. After several atempts of saving running config to the startup config, then rebooting the device. I am having to reload the configs manually from TFTP because they are gone. I have also tryed the "wr" command to see. Is there a proper way to shutdown this particular type of router?
View 2 Replies View RelatedCisco WAN :: 1941 Router Not Pass Traffic From Window 7 Computers
Jul 14, 2011I cannot telent to 1941 router from a Window 7 PC and I can a Window XP PC. Telnet is enabled on Win 7 PC. I upgraded 1941 to latest IOS.Compters running Windows XP can telnet to router and hit the internet. Computers running Windows 7 cannot hit the internet. I replaced the 1941 with a 1760 router and Win 7 computers can telnet to router and hit the internet. I used the same config from the 1941 on the 1760.
View 5 Replies View RelatedCisco Switching/Routing :: Router 1941 Security License?
Mar 12, 2013I have a cisco router 1941 and i have uploaded before evaluation license , now i have already bought cisco security license .I have already installed on cisco router , but the problem the router is still using the evaluation license not the new license .
RSP#sh flash:
-#- --length-- -----date/time------ path
1 55088360 Oct 10 2012 06:04:10 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin
2 2903 Feb 4 2013 12:23:32 +00:00 cpconfig-19xx.cfg
[Code].....
Cisco WAN :: IPv6 Traceroute Fails / Blocked On 1941 Router?
Sep 16, 2012I am encountering an issue with IPv6 trace route both from within LAN as well as on the Cisco router is unable to function beyond the WAN interface of my Cisco 1941 router with IOS v15.x.
Below is the IPv6 Access List:
[code]
sequence 410 remark Allow Specific Inbound ICMP Types
permit icmp any 2001:D98:XXXX::/64 1 3
permit icmp any 2001:D98:XXXX::/64 packet-too-big
[Code].....
Cisco Switching/Routing :: Factory Resetting 1941 Router
Oct 27, 2011What is the procedure to reset a 1941 router to factory defaults? I just recieved my1 1941 router. I connected it up to my Mac using USB. I got loged in using the cisco/cisco login and it said it will only work once and that I should create a new account. So I entered the command as directed on the screen and it gave my an error about the command. I verified it three times and each time it rejected. While I was looking online for an answer the connection timed out and now I can't get back in.
View 1 Replies View Related