Linksys Wireless Router :: WAG54G2 - How To Open Image File On Notebook
Apr 14, 2013I had download the last version firmware 10.0.19 WAG54G2 but its in img format and my notebook dont have CD drive anyway to unpack it ??
View 3 Replies
ADVERTISEMENT
Linksys Wireless Router :: Wrt54gh - The Image File Is Incorrect
Sep 19, 2012I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies View RelatedLinksys Cable / DSL :: WAG54G2 - Open Nat On Ps3 And Xbox 360?
Dec 15, 2010i have the xbox and ps3 wired to the router and the laptop wirelessly to the router (if that makes any difference)
My router is the Linksys WAG54G2
Cisco Firewall :: ASA5510 Device Manager Image Set But Not A Valid Image File
Feb 9, 2012I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedLinksys Cable / DSL :: UPnp Does Not Work In WAG54G2 Wireless Router
Jul 31, 2012I have a similar thread about this issue, the issue of this modem not support any kind of port forwarding actions... even disabling firewalls, using DMZ, port range forwarding the whole ip range , solves a thing...
it has upnp and port ranging features all over it but somehow it does not do it, and nobody cares excepty the ones that invested in it...
so if you are stuck with a router like me, dont bother wasting hours on it, and leave it to the people who are responsible for it.
Linksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox
May 23, 2012I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedCisco Wireless :: Aironet 1240ag - Image File For IOS Software?
Apr 8, 2013I have a question regarding cisco aironet 1240ag AP.
1st - Does this devices has a firmware ? So I can update a firmware ? or is an image file for IOS software ?
2nd - Which wireless controller I can use to handle multiple aironet 1240ag AP's ?
3rd - The controller has the ability to create temporally guest password ?
Broadband :: Android Notebook Not Opening Exe File?
Feb 23, 2013internet dongal , cant open autorunexe file as andriod not supporting so unable to set up internet dongal ?
View 1 Replies View RelatedLinksys Cable / DSL :: Use WAG54G2 As A Router?
May 30, 2011I want to use WAG54G2 as plain router. I happen to have 2 of these. If i can make one of these work as router wired to another through ethernet cable or even wireless i can save some money on router.
View 8 Replies View RelatedCisco Firewall :: Need Image File Install On Pix 515
Aug 28, 2011I have a pix 515, time to time the firewall start rebooting with invalid flash error I found erasedisk.bin in internet, after that i cant load pix532.bin ios file and others pix***.bin are not workingThe only file i am able to load is pix508.bin it,s start asking me activatin number before install I have a previous activation number ios version 5.3.2 but this number is not correct.
View 1 Replies View RelatedCisco Wireless :: WLC 4404 - Failed To Open File / Retrieve Statistics
Oct 16, 2012the WLC 4404 present this logs:
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/927/stat.(erno 24)
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'gccp_t'
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/926/stat.(erno 24)(code )
when present this loggs the device present those symptoms:
lost GUI session
Lost console conection
Lost SSH and Telnet conecction
the WLC 4404 not work is stopedd
Linksys Wireless Router :: E2500 / Slow Connection On 2nd Computer (notebook)?
Feb 24, 2013I'm using an E2500 router and an EA2500 adapter (to update my desktop from 802.11 g connection to 802.11n). I've connected my notebook to the network and the connection speed for the notebook is approx. 5.5 Mbps compared to 21.5 Mbps for the desktop connection. why the notebook connection is so much slower?I've just reinstalled both the E2500 and EA2500 tonight. I'm not sure whether or not there was such a vast difference in speed between the two before the reinstallation.
View 4 Replies View RelatedLinksys Wireless Router :: E1500 What Is Best Notebook Card To Replace Broadcom
Jul 13, 2012I own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:
1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then
2) what is the best notebook card to replace the Broadcom with to assure these issues go away.
Linksys Cable / DSL :: Wag54g2 Router - Device Can't Reconnect Until Reboot
Apr 28, 2011I own a lynksis wag54g2 wifi router. I can establish wi-fi connection with my Android phone, Iphone 4, notebook, but after I disconnect the device from the router, I can't reconnect it again until I reboot the router. I tried some othe mobile devices with wi-fi support, the problem is the same. I tried set up different wireless security settings, tried to switch wireless mode to b, g, and mixed, installed new firmware 1.00.19, but the problem is not resolved.
View 1 Replies View RelatedLinksys Wireless Router :: New Notebook PC Stops Entire Home Network On WRT110?
Nov 13, 2011I just got a new notebook that has windows ultimate, and whenever i turn it on it knocks off all the other PCS on the network and the printer, including the one the router is wired to. I can only get it to pick up all 4 devices when i go into the Lynksys program and click change password. But then the program locks up and i have to shut it off manually.
I already reset the router four times trying to get it to pick up all the PCs but it never works. I'm ready to toss the router and get something else. Are there any settings I can change or reset before this router becomes garbage fodder?
Cisco Firewall :: ASA 5505 ASDM Image File Missing?
Jun 17, 2012I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
View 2 Replies View RelatedCisco WAN :: 6509 System Image File Is Sup Boot-disk
May 27, 2013i recently bought a new Supervisor Engine 720 WS-SUP720-3B and 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, power not allowed: Unknown Card Type. the System image file is "bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXE6a.bin".
I have a 6509 up and running the same mods and working fine BUT the System image file is sup-bootdisk:s72033-ipservicesk9-mz.122-18.SXF7.bin. Is the boot image what is causing my isses?
Linksys Cable / DSL :: Set Up WAG54G2 Wireless Gateway?
Mar 23, 2013Set up my WAG54G2 wireless gateway - I am able to connect to my LAN and the internet. The wireless works fine. However when I plug my server that use a wired connection into the modem/router,I lost the connection and I still unable to have internet at All. I use the firemware version V1.00.19.
View 6 Replies View RelatedLinksys Cable / DSL :: WAG54G2-EW / Windows 7 Laptops Not Wireless
May 27, 2011Last year I was working with Vista laptop and pc , there were no wireless problems with the WAG54G2-EW. Now I have 2 laptops, working on windows 7. But they cannot go to wirless mode, only connected with a cable I can go to the internet. I have downloaded the last firmware.When I tried Windows help the conclusion is : your router cannot be configurated for Windows7
View 2 Replies View RelatedLinksys Cable / DSL :: WAG54G2 / Error 322 When Reinstalling Wireless Modem?
Feb 8, 2011I have WAG54G2 wireless modem. It has been working perfectly until I formatted my desktop computer and reinstalled Windows XP. Now I want to reinstall my modem but is gives this error:"Error 322 New Router or Gateaway Not Detected"The old wireless configuration still works with my laptop, but I am afraid of losing my wireless connection so I did not reset the modem. Do I have to reset it?
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G Notebook Screen Closed / Went To Standby Mode / Stopped Upgrade Process
Jan 18, 2012I was upgrading the firmware of the WRT54G router when the notebook´ screen closed and it went to standby mode. It was stoped the upgrade process.Now only the ports and Internet LEDs light up, but the power LED is off.I also cannot connect to thenavigator for show the administrator´s window. Any procedure to recover the operation of the router in a situation like this?
View 1 Replies View RelatedCisco Switching/Routing :: Catalyst 6509-E - TFTP Image File Transfer / Out Of Sequence
May 29, 2012I am doing image upgrade on Catalyst 6509-E. During TFTP image transfer to sup-bootflash I always see !!!!!!!!!!!!!!!!!o!!!!!!!!!! "o" out of sequence packet. Although the image size seems to be correct at the end but there is always some "o" packets.
I am assuming not, but I haven't tried loading with the image after seeing this.
Cannot Open Email File Attachments?
Sep 8, 2011I can no longer open email file attachments, I get no message of the fault
View 1 Replies View RelatedLinksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image
Feb 3, 2013I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
Belkin Routers :: F5d8233-4v4 No Known Program Will Open File
Jan 30, 2013trying to download current firmware for my f5d8233-4v4 and i get this message, "No known program will open this file. This file is part of a program."
View 1 Replies View RelatedBelkin Routers :: Surf N300 Update File Won't Open
Feb 2, 2013Windows cannot open this file (the update). what program opens the update? I just bought a SURF N300 v F7D6301 and am trying to install the update on the website, but I just get a box that says windows cannot open this file.. what program do i need to tell it to use to open the update?
View 1 Replies View RelatedLinksys Wireless Router :: Open Nat On A WRT160n V3?
Jan 4, 2012I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies View RelatedLinksys Wireless Router :: E1200 - Cannot Open NAT?
Jun 5, 2012I have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedLinksys Wireless Router :: XBOX 360 NAT Is Set To Open
Nov 7, 2007I have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies View RelatedLinksys Wireless Router :: Open Nat For WRT54GSV4?
Sep 22, 2011Get my NAT set to open for MW2 for abit now but cant seem to figure out what the problem is. opening the NAT for this router for Modern Warfare 2 on the PC, not Xbox or PS3
View 7 Replies View RelatedLinksys Wireless Router :: Open Nat On E1000
Jul 26, 2010I have a PS3, and i play allot of video games such as all COD game especially MW2. It says i have a strict or moderate NAT. My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless
View 9 Replies View RelatedLinksys Wireless Router :: Get Open Nat For Mw3 On Ps3 WRT610n?
Nov 15, 2011ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G V8 - 192.168.1.1 Will Not Open?
Dec 10, 2009Two days ago I was able to type this in my browzer (Safari, Macintosh) and open the page. Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding. How can I get onto this page. I need to change the settings on my WRT54G V8.
View 9 Replies View Related