Cisco Wireless :: WLC 4404 - Failed To Open File / Retrieve Statistics

Oct 16, 2012

the WLC 4404 present this logs:
 
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED:  osapi_file.c:370 Failed to open the file : /proc/927/stat.(erno 24)
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-TASK_GETTIME_FAILED:  osapi_task.c:3431 Failed to retrieve statistics  (/proc/<pid>/stats) for task 'gccp_t'
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED:  osapi_file.c:370 Failed to open the file : /proc/926/stat.(erno 24)(code )
 
when present this loggs the device present those symptoms:
 
lost GUI session
Lost console conection
Lost SSH and Telnet conecction
the WLC 4404 not work is stopedd

View 3 Replies


ADVERTISEMENT

Cisco :: Retrieve Username Bound To IP From WLC 4404?

Dec 28, 2011

We have a WLC 4404 with version 7.0.220.0 of the firmware/software.We use it to control the  wireless network on our campus, we basically have 2 WLANs defined, one authenticated (using Radius [AAA]) and one not authenticated which is only turned on when needed (when we host some event).At the moment both these WLANs use the same address space, we will hopefully split it soon since that is better from a security point of view.
 
I would like to create an 'externalacl' for our squid proxy (script/program) that when handed an IP address can go to the WLC and find out what username was used to authenticate.Does the WLC provide any interface to this information?We also have an NCS so if it provides the interface that is also fine....
 
The other option I see is getting the information from the Radius server that the WLC uses, the only problem with that is that the WLC does not send Logout messages to the radius server (or the radius server doesn't interpret them properly/something wasn't setup correctly).This would result in a user on the unauthenticated WLAN that got the same IP as an authenticated user got earlier being treated like the authenticated user by squid (since radius still has an entry saying Login on IP by user).

View 1 Replies View Related

Cisco :: ASR1002 SNMP Statistics For GRE Tunnel Interface Statistics

Mar 28, 2013

We use Cacti to get interfaces statistics of a ASR1002 router (version 03.04.02.S.151-3.S2).A new GRE tunnel has been created, but unfortunately we are not able to get basic interface average during the day.What is surprising is the fact the graphs are built on the night only.
 
It seems as soon as we exceed some level of Bandwidth (~ 700-800k) the tool does not get the information.The OID I try to get are ifHCInOctets (.1.3.6.1.2.1.31.1.1.1.6) and ifHCOutOctets (.1.3.6.1.2.1.31.1.1.1.10) and some other interface statistics for both 64 and 32 bits. [code]

View 2 Replies View Related

Sharing :: 8032 - Browser Service Has Failed To Retrieve Backup List Too Many Times On Transport

Dec 14, 2011

This network has a peer network with a mixture of Win 7, Vista and XP computers. The network problem I am having is with an XP computer that was able to access network shares on a Win 7 Pro (64-bit) computer yesterday, but cannot today. I tried repair steps that have worked for me in the past, but didn't today.

1. Rebooted.
2. Turned off Windows Firewall.
3. Re-ran the Network Setup Wizard and select turn on file and print sharing.
4. Changed IP configuration to choose NETBIOS over TCP/IP.
5. Uninstalled AV software.

Error Messages that I have been receiving:

1. When attempting to connect to a share on Win 7 PC: "Microsoft Windows Network: The specified server cannot perform the requested operation. The connection has not been restored."

2. When trying to view the computers in the workgroup: "Workgroup is not accessible. You might not have permission to use this resource. Contact the administrator of this server to find out if you have access permissions. The specified server cannot perform the requested operation.

3. When using the command, "NET VIEW" from the command prompt: "System Error 58 has occurred.

4. Event Log: Browser error 8032. The browser service has failed to retrieve the backup list too many times on transport DeviceNetBT_Tcpip_{06ECF93A-1B89-4FF4-923E-F3302EF95FE1}. The backup browser is stopping.

View 3 Replies View Related

Cisco Wireless :: 5508 - Software Update / Code File Transfer Failed

Dec 10, 2012

From 6.0.199.4 to  AIR-CT5500-K9-7-3-101-0.aes. Get the error below halfway through download of file to controller. 

*Dec 11 14:18:55.775: %UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:4158 Error FTP file Transfer [ftp_get], <28>, No space left on device.
 
I have no idea how to delete files form the storage on the 5508? TFTP transfer gives me this error after the upload is done:

% Error: Code file transfer failed - Error while writing output file
*Dec 11 15:11:45.514: %TFTP-3-FILE_WRITE_FAIL: tftp_client.c:517 Error while writing 512 bytes to file. Tftp error.
*Dec 11 15:11:45.514: %TFTP-3-WRITE_NOCLOSE_FAIL: tftp_client.c:147 Error while writing the local file: No space left on device
*Dec 11 15:11:45.514: %OSAPI-3-FILE_WRITENOCLOSE_FAILED: osapi_file.c:582 Failed to write 512 bytes (FileDesc:64). file write no close failed

View 6 Replies View Related

Linksys Wireless Router :: WAG54G2 - How To Open Image File On Notebook

Apr 14, 2013

I had download the last version firmware 10.0.19 WAG54G2 but its in img format and my notebook dont have CD drive anyway to unpack it ??

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 License File Installation Failed

Sep 19, 2011

have a  ACS 5.2 version installed on Vmware . I  purchased below  liscense
 
Product Name                  : L-CSACS-5-LRG-LIC=
Product Description         : L-CSACS-5-LRG-LIC= : ACS 5 Large Deployment License (Electronic Delivery)
 
When i am trying to upgrade the liscense i am getting an Error " Liscense file installation failed : The liscense file must contain single base liscense "

View 2 Replies View Related

System Restore Failed To Replace The File

Jan 4, 2012

After unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.

View 9 Replies View Related

Cannot Open Email File Attachments?

Sep 8, 2011

I can no longer open email file attachments, I get no message of the fault

View 1 Replies View Related

Cisco :: RME 4.3.1 / Failed To Export Detailed Device Report To CSV File

Apr 15, 2010

I try to export a Detailed Device Report to a CSV. It failes:
 
<HTML><META HTTP-EQUIV="content-type" CONTENT="text/html;charset=utf-8">
<H1>HTTP Status 500 - </H1><HR SIZE=1 noShade>
<P><B>type</B> Exception report</P><P><B>message</B> <U></U></P><P><B>description</B> <U>The server encountered an internal error () that prevented it from fulfilling this request.</U></P><P><B>exception</B>

[code].....

Exporting to PDF works OK.CW is running on Windows server. RME is 4.3.1

View 11 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2. Build15 - Replication Failed With Cannot Access File

Dec 22, 2009

Just upgraded from 4.0 - to 4.2 then to 4.2.1 15. As you may have seen with periovous posts of mine its not been an esay ride.I have now managed to get it all working - backups AAA etc but for some reason i cannot get the replication to work! Its states the following...
 
Within the Database Replication active log - Error OutBound database replication failed - refer to CSAuth log file.Other lines in the log state  its ok eg - Component logging reports was updated - being replicated to slave...

Please note that the $ is a symbol that i have used because the symbol in the log is strange and i  cannot seem to be able replicate here with this text, for example $etworks - should be networks.

View 4 Replies View Related

Cisco VPN :: ASA 5505 Error Copying X To Temporary RamFS File Failed

Nov 16, 2012

[OK] webvpn
webvpn
[ERROR] anyconnect image disk0:/anyconnect-win-3.0.08057-k9.pkg 2
copying 'disk0:/anyconnect-win-3.0.08057-k9.pkg' to a temporary ramfs file failed
 
Trying to add the windows anyconnect to the list of usable software for clients and that error happened. What is going wrong? I assume I dont have enough RAM...

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Import Template Gives File Format Validation Failed

Sep 21, 2011

Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.

View 1 Replies View Related

Cisco WAN :: 3560x Switch - Copying IOS File To Flash / Failed To Boot

Jan 20, 2013

I have a 3560x switch with the flash formatted . I have tried to solve the problem by copying the IOS file to the flash. But the boot failed either .I have tried to copy the same IOS by the Xmodem, The boot failed again.My question is how to fixed the boot issues after the flash was formatted?

View 4 Replies View Related

Belkin Routers :: F5d8233-4v4 No Known Program Will Open File

Jan 30, 2013

trying to download current firmware for my f5d8233-4v4 and i get this message, "No known program will open this file. This file is part of a program."

View 1 Replies View Related

Belkin Routers :: Surf N300 Update File Won't Open

Feb 2, 2013

Windows cannot open this file (the update). what program opens the update? I just bought a SURF N300 v F7D6301 and am trying to install the update on the website, but I just get a box that says windows cannot open this file.. what program do i need to tell it to use to open the update?

View 1 Replies View Related

TP-Link 150Mbps Wireless :: Statistics Graph For TL-WR740N?

Feb 7, 2013

Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL

how to get a graph of the router statistics like upload and download speeds - both total and per device? Something like MRTG. The closest I came to getting data from the router was with RouterStats-Lite, but I was unable to get it to work.

View 6 Replies View Related

Linksys Wireless Router :: E2500 / Firmware 1.0.7 - Traffic Statistics

Mar 10, 2013

I have an E2500 router, running the latest firmware 1.0.7.

Where or how can i see which is the machine (mac or ip) that is doing more traffic, in fact i would like to see what computers are doing how much traffic.

This is a default on most routers, its so weird to not been able to find this on a Cisco product.

View 1 Replies View Related

Cisco Wireless :: WLC 4400 - Unable To Find AP Entry In Database / Could Not Process Statistics Info

Jun 24, 2012

Six month ago I installed and configured a wireless mesh with the equipment named. From two weeks ago one AP (MAP) restarts every day. In Wireless Lan Controller appears this logs:
 
"Unable to find AP entry in the database, could not process statistics information"

View 2 Replies View Related

Linksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox

May 23, 2012

I have the port numbers but do not know how to proceed from there.   Router is a WRT160N V2.

View 9 Replies View Related

How To Retrieve Wireless Account

Nov 12, 2012

I do not know my wireless account name and do not know how to retrieve it.

View 1 Replies View Related

Cisco :: Need To Retrieve Wireless Keys From WC2504

Feb 13, 2012

I need retriving the wireless key from WC 2504.  I have a lot of clients connected to the WLAN and need to add another one but my notes/files got deleted.  Is there a way to see the keys on the controller? 

View 0 Replies View Related

Wireless :: How To Retrieve Windows Password

May 15, 2011

i have forgot my password on my new computer windows7 cant open windows

View 1 Replies View Related

Wireless :: How To Retrieve Username / Password

Mar 23, 2011

I forgot my username and password how can i retrieve my username and password,, i forgot to put password for connection on my wifi.

View 1 Replies View Related

How To Retrieve Password For Wireless Router

Sep 6, 2012

how do i retrieve my password for my wireless router

View 1 Replies View Related

Retrieve Wireless Router Key Code?

Jul 7, 2012

how i find the code so i can use my new ipad?

View 2 Replies View Related

How To Retrieve Netgear Wireless Router Key Code

Mar 30, 2011

I am trying to retrieve my key code for my Netgear Wireless Router.

View 2 Replies View Related

How To Retrieve Password For Wireless Internet Connection

Mar 14, 2011

i have been out of the country for a while and now i am unable to to connect to my home wireless access as i have forgotten the password. how and where can i retrieve it

View 1 Replies View Related

Linksys Wireless Router :: E1000 - How To Retrieve Password

Apr 14, 2013

Lost password for router- how do I retrieve password.

View 2 Replies View Related

Linksys Wireless Router :: How To Retrieve Network Key On E2000

Aug 27, 2012

I want to set up another wireless laptop to access my e2000 but i dont remember the network key, How can I retirieve the key? through cisco connect maybe?

View 1 Replies View Related

Retrieve Forgotten Password / Security Key For Secure Wireless Network?

Feb 12, 2011

Where can I retrieve forgotten password/security key for my secure wireless network?

View 2 Replies View Related

Linksys Wireless Router :: WRT54GV8 Can't Retrieve A Valid IP Address

Jul 20, 2011

My problem is that when my xbox tries to connect to my linksis router, the xbox says that it can not retrieve a valid IP address.My router Model # is: WRT54GV8

View 1 Replies View Related

Cisco WAN :: Nexus 7000 (NX-M132XP-12L) And QoS Statistics?

Sep 18, 2012

I have such input data:
 
2xN7K-C7010 - Nexus7000 C7010 (10 Slot) Chassis
2xN7K-M132XP-12 - 32x10Gbps
NX-OS version 6.1(1)
 
I have enable (by default) QoS feature on them:
 
N7k# show policy-map interface brief  
Interface/VLAN [Status]:INP QOS       OUT QOS       INP QUE       OUT QUE
================================================================================
port-channel1   [Active]:                            default-in-po default-out-p
port-channel2   [Active]:                            default-in-po default-out-p
port-channel10  [Active]:                            default-in-po default-out-p
Ethernet1/1     [Active]:                            default-in-po default-out-p

[code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved