Linksys Wireless Router :: New Notebook PC Stops Entire Home Network On WRT110?
Nov 13, 2011
I just got a new notebook that has windows ultimate, and whenever i turn it on it knocks off all the other PCS on the network and the printer, including the one the router is wired to. I can only get it to pick up all 4 devices when i go into the Lynksys program and click change password. But then the program locks up and i have to shut it off manually.
I already reset the router four times trying to get it to pick up all the PCs but it never works. I'm ready to toss the router and get something else. Are there any settings I can change or reset before this router becomes garbage fodder?
I'm trying to block two URL's over the entire network via my E4200. I'm having a heck of a time doing this, I loginto my router via the browser (the web setup) (because I think Cisco Connect on the Mac is about the worst software ever written.) And I go to the Access Restrictions page. There I understand I'll have to use the Internet Access Policy pane to make some more advanced settings than the Parental Control.
I enter a name for my rule, so far so good. Enable it. Go to the applied PC page. Open the page to enter MAC adresses and IP's. I go to the IP Address Range field and entere in the box numbered 01; 192.168.2.2 to 192.168.2.51 which in my case is the enitre network. Save the setttings and close that window.
I don't set Access Restriction to deny becasue that seems to block the entire network.
So I go the the Website Blocking by URL Address option and enter the URL I want to block.
I don't do anything wiht the the Blocked Applications since I don't want to block a specific service or application. So I click Save Settings.
And yet when I go to the URL I want to block it doesn't work! [URL]
My brother has an HP G60 from 2009 with windows 7 home premium and 64 bit operating system. Whenever he turns it on and connects it to the internet, the whole network crashes. My xbox, ipod, laptop, and the main desktop (Which we also just changed to a Dell one.)downstairs all cannot connect to the internet. This lasts from anywhere between 2 and 15 minutes and it continues to crash the internet in about 15 minute intervals as long as his computer is connected to the internet. No other devices in the house cause this as I can have all of my stuff connected and nothing happens. We have a Linksys WRT110 router but I don't think that or the modem is the problem as we have changed both multiple times. This has been happening for about a year ever since my oldest brother gave my brother the laptop.
My wrt110 firmware .05 has been working fine until now. I have a couple of phones, 2 printers, 3 laptops and a wii happily connecting to it. However now when I power on the wireless device, nothing can connect wirelessly. Wired connection is fine, but my wireless network disappears. No device can find the network, although it is there and set up on the admin pages. I pull the power chord out for 30 seconds and try again to get it going again, a bit like trying to start a car. Everntually devices find the network.
On two occasions it has forgotten the wireless settings and restored an open 'linksys' network. It's really infuriating becuase whilst I restore the SSID and use the same key, not all the devices actually recognise it and have to be reconfigured on the devices.
i have an RTA1025W router. When i plug a network cable into it nothing happens. When i power it down with the cable still plugged in when it boots the LAN1 led flashes rapidly then stops? Then no connection to it via the PC?
I have a the aforementioned router set up with one PC laptop connected via ethernet cable and two to five other devices (PC laptops, iPhone, iPad, Linux Laptop) connected at any given time. About once or twice a week the router drops the network. I can still see the SSID, but can't connect on any device. The wired laptop gets dropped as well. I tried to ping its IP, but it says the device is unreachable. The only solution is to walk upstairs and unplug the router, which fixes it every time until a few days later when it happens again. I've restored factory settings a number of times.
I have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
My computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
The unit seems to be Ok, but it's not. Power light is solid blue, Internet light is flashing blue when connected to cable modem, when wireless is on wireless light flashes blue, when ethernet cable is connected the correct 1-4 blue light flashes.The unit issues IP addresses wirelessly with or without security, and on ethernet, but with no Internet access.I can log on to the router and have upgraded firmware to 1.0.07. Tried reset button a number of times, makes no difference.When logged in to the router and looking at the Status screen, it shows no IP address, no Subnet Mask, no Default Gateway, no DNS, thus I can't get on the Internet. Connection type is Auto Config - DCHP. It does show the correct domain name as other wireless routers show.
Tried everything I could find on the boards (hard reset for 30 seconds, cycling power). The power light's the only one that's coming on and I can't tell if it's on continuously or just blinking really fast.
No problem with direct connection to the modem via ethernet, but I can't see the WRT110 via ethernet or wireless. It just suddenly stopped working yesterday.
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
The WRT110 is hooked up to Cable through Comcast and works fine with LAN connections. The problem comes in with more than one wireless laptop tries to connect. First, it was loaded with 1.0.4 firmware and my girlfriend's XP laptop would connect but drop the connection a lot. My Windows 7 laptop wouldn't connect at all. After trying everything someone recommended upgrading the firmware to 1.0.7. Well, now my Windows 7 laptop connects but the XP laptop will not. The DHCP won't assign it an IP, although it says it's connected.
I see that many people have the same problem, random disconnects. I am a long term sufferer from this. I have called support before they can't fix it. and being knowledgeable with routers has not worked at all. I turned off every wireless device in the house, even the microwave it still happens. I change the channel countless times it still happens.
I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
I have a WRT110 wireless router. My problem is that my laptop has issues connecting to my router. It sees it and shows that there is a strong signal but sometime it will connect other times not. My laptop has no problem connecting to other wirelss routers. And my other devices have no problem connecting to our router. I've reset the router several times and changed the router to no password or security of any sorts. How can I get my Laptop to connect to my router?? I feel like it is a setting issue between the Router and the laptop. Is there a way I can erase the history of the router from the laptop and start fresh?? Like I've said I have reset the router several times. Does it have to do with my firewall?? It's just frustrating that my laptop can connect to anything but this Router. And my other devices like our blue-ray and Wii can connect to the router without problems so why can't my laptop and router connect to each other?
I have a WRT110 router connected to my desktop computer. The router works great for the desktop and one laptop, but if I try to connect a second laptop it disconnects the first one.
When I type the routers IP address in teh browser window, nothing happens so I cannot access the router setup. I have a WRT110. What am I missing. I was able to do that when I first setup the router.
I have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
I have a WRT110 that let's a wired connection through to the internet but none of the wireless connections. I'm connect to a new Motorola DSL modem provided by AT&T. (Lightening killed the last one) My wireless stuff can talk to each other but can't access the internet.
I'm trying to upload some images for my job but everytime I hit the up load link to get the image loader I get a redirect to [URL]
What does this mean? I know its a router thing because I tried getting the image loader by using the computer directly from the modem and I didn't run into the issue. Do I have to open a port or something cause all I know is the router is on security lock down.
i have problem with wi-fi network and WRT 110. Seems to me that router only accepts 1 device. I used to have only 1 device (laptop) using wi-fi and desktop connected with ethernet as a second device. It worked just fine. Recently I added 2 wireless devices : apple tv and ipad 2. I can access wireless network only with one of them being “on” at the time (e.g. apple tv works when ipad and laptop don't use wi-fi. As soon as I connect another device router stops working (i'm loosing connection for wi-fi and ethernet) and I don't have internet access until I reboot router. (it happened only once for short period of time – about 40 min.- that I was able to connect to wi-fi with 2 devices. After that it never happened again). I'm not sure if I need newer router or I can still make it work with wrt 110.
Mac airport shows full bars in network connnection and green connected dot, but no access to internet. Ethernet connection works fine. I also couldnt connect with my Iphone.
I have Charter cable with Motorolla SB6121 modem. I've reset the modem, rebooted everything, cloned my ip address, all several times .......but still no go.
Linksys says they don't support this router anymore accept for a pay for support service, which I would like to avoid.
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
Set up: Router: WRT110 1 computer connected via ethernet cable 1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
we upgraded our router from WRT54G V5.0 to WRT110. before we dont have any issues using the ACCESS RESTRICTION from WRT54G but now on WRT110 we encounter a GLOBAL BUG. we are blocking the website like Youtube, Friendster, Facebook etc. on the EDIT LIST TAB we specify 4 IP Address that will not going to access the said websites. The problem is...all Computers (about 15 PC) that are using the Internet cannot access the said website also but we did not enter the other IP's.
A couple days ago I noticed that my wireless internet connection on my iPhone would cut in and out, then stopped all together. I also had no connection on my mac which is wired to the WRT110. I bypassed the WRT110 and then I had a connection on my Mac meaning the WRT110 is the problem. I haven't changed or added anything lately that could've caused this....
Was online the other night when my network suddenly dropped out on me. I assumed it was the router, not my computer, so I restarted it and got nothing. Same with my modem. Then I completely reset the router and, obviously, lost the network I had set up. Didn't realize until today, when I downloaded the setup instructions and reinstalled the router with a new network that the problem might actually be with my computer. I can use the ethernet port to access the web both with the direct line from the modem and when using a line through my router, I just can't get my computer to work on the network I set up. I know the network is valid because it works with my smart phone and a couple of other devices. On my Mac, it shows up in the list of available networks and has full signal strength. Diagnostics in network preferences gives me the following message: "AirPort has a self-assigned IP address and may not be able to connect to the Internet."
