we upgraded our router from WRT54G V5.0 to WRT110. before we dont have any issues using the ACCESS RESTRICTION from WRT54G but now on WRT110 we encounter a GLOBAL BUG. we are blocking the website like Youtube, Friendster, Facebook etc. on the EDIT LIST TAB we specify 4 IP Address that will not going to access the said websites. The problem is...all Computers (about 15 PC) that are using the Internet cannot access the said website also but we did not enter the other IP's.
I have a WRT110 and in the access restriction settings section the time is in military. I try to set the restriction from 11:30 pm to 6:00 am. I cannot because it tells me the second time "6:00 am" has to be larger than the first. I don't understand a way around this.
I have set up access restriction times for my son (we have wireless access for all systems). I use the MAC address on his systems. Xbox, Kindle Fire and his Laptop. The MAC address are Correct. Here is the problem:
I set the "allow" and times from 6pm - 11:00 pm (while on xmas vacation) - the system works for a while he is shut off as i would like but....
After a period of time the entire house goes off line. I have to reboot the power on e2000 router and then disable the access restrictions. System then works. Problem is repeatable. What is the deal. I have updated firmware already. Otherwise the system works great. Never dies. Just when i set access restricions for a SPECIFIC time it kills entiore houese. BTW i can deny him outright 24/7 and the system idsables his access fine. Its just when i set specific times
My Wireless-N Home Router WRT120N with version 1.0.07 seems to have a problem blocking Sites through scheduling with Access Restriction "Allow" ...I notice that... when I enable access restriction, with policy and some range of computers connecting to my router , and set it to "allow" from "monday - friday" from "8am-6pm" .. with a purpose of blocking some social networking sites, example facebook, It works perfectly fine. But when the "scheduled" time comes ( before 8am and after 6pm ).. I cannot access the internet.. router is working, it detects my modem.. but no internet connection. It always happen before and after the "scheduled time" before the configured access restriction takes over. I have to disable the Access Restriction to continue our internet access.
target 192.168.0.21following are rules of access restriction on WRT54G1.rule A- 07:00am~10:00am,internet access allowed, keyword blocked such as Facebook,mail.2.rule B- 10:05am~10:00am,internet access allowed, no keyword blocked.but 192.168.0.21 fails to access internet after rule A expired.
I tested this with my laptop by setting its access restriction/parental control to always not access the internet. But still my laptop can still search through Wikipedia. Is this because of the router firmware? By the way I'm using the latest Connect cloud firmware.
All the documentation for this router shows the Access Restriction tab in the router configuration menu. It's the same as other linksys routers. The current version of the firmware doesn't have this functionality. Was it removed?
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
I have a E4200 fw 1.0.03 my pc, laptop connect to E4200 is OK but have a problem with my iphone 3Gs iPhone 3Gs connect to E4200 at day is OK althought sometime loss packet but at night (after 17:30) iPhone can't connect to E4200, althought I don't config anything.This is my E4200 configure fw: 1.0.03 No set schedule access internet
At Day This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Day Sun, 04 Dec 2011 07:11:00 received REQUEST from 00:26:bb:fb:29:a0 Sun, 04 Dec 2011 07:11:00 sending ACK to 192.168.1.136 get IP very fast ping packets at day (loss some packets):
But at Night everything change althought I don't config anything on e4200This is a log DHCP when iPhone(MAC: 00:26:bb:fb:29:a0) connect to e4200 at Night Sat, 03 Dec 2011 22:11:20 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:22 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:27 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:28 received DISCOVER from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:28 sending OFFER to 255.255.255.255 with 192.168.1.135 Sat, 03 Dec 2011 22:11:31 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:31 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:32 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:32 sending ACK to 192.168.1.135 Sat, 03 Dec 2011 22:11:34 received REQUEST from 00:26:bb:fb:29:a0 Sat, 03 Dec 2011 22:11:34 sending ACK to 192.168.1.135
Very difficult to get IP from e4200 at night, sometimes getting IP but not on the Internet, sometimes can not get IP and iPhone get message "unable to join the network "ciscoTNTn""ping packets at night (can't ping):
While iPhone is connected to the Draytek Vigor2600VG good no matter day or night.I re-upgrade fw 1.0.03 and restore factory defaults but still not fixed.Is that a bugs ?
In the EA6500 Device Tab of the connected devices all the information should be considered as wrong or incomplete. The router and all devices set to static ip addresses work fine but you should use another information source as to what and where devices are connected on your network. Cisco says they are aware of the bug and are working on a firmware update.Also, reported to Cisco, when and if using Windows 8 and IE 10 the restore function does not respond with the IE 10. Works fine in Chrome and earlier Internet explorer.
Bugs are to be expected in any new device, but time will tell as to how fast Cisco fixes these issues and timely releases firmware updates to us their consumers. The connected device tab information bug needs a quick fix because anyone relying on the information would be working to connect devices that are already on the network or maybe listed with the wrong mac or ip address.
I bought this router last year (out of warranty) and it has worked great... until 3 days ago. I came home and noticed my laptop (Dell Inspiron 1525) only had "local access only" in the network center. "Local only" both in a wired and wireless connection. I then unplugged my modem, my router, and restarted my computer. I turned everything back on and still nothing. I also checked for wires and the other simple stuff like that. The internet connection works normally when I plug Ethernet cable directly into my computer and bypass the router .My iPhone will connect to the router as well... just with no internet connection?
The unit seems to be Ok, but it's not. Power light is solid blue, Internet light is flashing blue when connected to cable modem, when wireless is on wireless light flashes blue, when ethernet cable is connected the correct 1-4 blue light flashes.The unit issues IP addresses wirelessly with or without security, and on ethernet, but with no Internet access.I can log on to the router and have upgraded firmware to 1.0.07. Tried reset button a number of times, makes no difference.When logged in to the router and looking at the Status screen, it shows no IP address, no Subnet Mask, no Default Gateway, no DNS, thus I can't get on the Internet. Connection type is Auto Config - DCHP. It does show the correct domain name as other wireless routers show.
Tried everything I could find on the boards (hard reset for 30 seconds, cycling power). The power light's the only one that's coming on and I can't tell if it's on continuously or just blinking really fast.
No problem with direct connection to the modem via ethernet, but I can't see the WRT110 via ethernet or wireless. It just suddenly stopped working yesterday.
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
The WRT110 is hooked up to Cable through Comcast and works fine with LAN connections. The problem comes in with more than one wireless laptop tries to connect. First, it was loaded with 1.0.4 firmware and my girlfriend's XP laptop would connect but drop the connection a lot. My Windows 7 laptop wouldn't connect at all. After trying everything someone recommended upgrading the firmware to 1.0.7. Well, now my Windows 7 laptop connects but the XP laptop will not. The DHCP won't assign it an IP, although it says it's connected.
I see that many people have the same problem, random disconnects. I am a long term sufferer from this. I have called support before they can't fix it. and being knowledgeable with routers has not worked at all. I turned off every wireless device in the house, even the microwave it still happens. I change the channel countless times it still happens.
I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
I have a WRT110 wireless router. My problem is that my laptop has issues connecting to my router. It sees it and shows that there is a strong signal but sometime it will connect other times not. My laptop has no problem connecting to other wirelss routers. And my other devices have no problem connecting to our router. I've reset the router several times and changed the router to no password or security of any sorts. How can I get my Laptop to connect to my router?? I feel like it is a setting issue between the Router and the laptop. Is there a way I can erase the history of the router from the laptop and start fresh?? Like I've said I have reset the router several times. Does it have to do with my firewall?? It's just frustrating that my laptop can connect to anything but this Router. And my other devices like our blue-ray and Wii can connect to the router without problems so why can't my laptop and router connect to each other?
I have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
I have a WRT110 that let's a wired connection through to the internet but none of the wireless connections. I'm connect to a new Motorola DSL modem provided by AT&T. (Lightening killed the last one) My wireless stuff can talk to each other but can't access the internet.
I'm trying to upload some images for my job but everytime I hit the up load link to get the image loader I get a redirect to [URL]
What does this mean? I know its a router thing because I tried getting the image loader by using the computer directly from the modem and I didn't run into the issue. Do I have to open a port or something cause all I know is the router is on security lock down.
i have problem with wi-fi network and WRT 110. Seems to me that router only accepts 1 device. I used to have only 1 device (laptop) using wi-fi and desktop connected with ethernet as a second device. It worked just fine. Recently I added 2 wireless devices : apple tv and ipad 2. I can access wireless network only with one of them being “on” at the time (e.g. apple tv works when ipad and laptop don't use wi-fi. As soon as I connect another device router stops working (i'm loosing connection for wi-fi and ethernet) and I don't have internet access until I reboot router. (it happened only once for short period of time – about 40 min.- that I was able to connect to wi-fi with 2 devices. After that it never happened again). I'm not sure if I need newer router or I can still make it work with wrt 110.
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
My brother has an HP G60 from 2009 with windows 7 home premium and 64 bit operating system. Whenever he turns it on and connects it to the internet, the whole network crashes. My xbox, ipod, laptop, and the main desktop (Which we also just changed to a Dell one.)downstairs all cannot connect to the internet. This lasts from anywhere between 2 and 15 minutes and it continues to crash the internet in about 15 minute intervals as long as his computer is connected to the internet. No other devices in the house cause this as I can have all of my stuff connected and nothing happens. We have a Linksys WRT110 router but I don't think that or the modem is the problem as we have changed both multiple times. This has been happening for about a year ever since my oldest brother gave my brother the laptop.
Set up: Router: WRT110 1 computer connected via ethernet cable 1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
A couple days ago I noticed that my wireless internet connection on my iPhone would cut in and out, then stopped all together. I also had no connection on my mac which is wired to the WRT110. I bypassed the WRT110 and then I had a connection on my Mac meaning the WRT110 is the problem. I haven't changed or added anything lately that could've caused this....
Was online the other night when my network suddenly dropped out on me. I assumed it was the router, not my computer, so I restarted it and got nothing. Same with my modem. Then I completely reset the router and, obviously, lost the network I had set up. Didn't realize until today, when I downloaded the setup instructions and reinstalled the router with a new network that the problem might actually be with my computer. I can use the ethernet port to access the web both with the direct line from the modem and when using a line through my router, I just can't get my computer to work on the network I set up. I know the network is valid because it works with my smart phone and a couple of other devices. On my Mac, it shows up in the list of available networks and has full signal strength. Diagnostics in network preferences gives me the following message: "AirPort has a self-assigned IP address and may not be able to connect to the Internet."
Using WRT110 router, running XP, SP3 on both laptops, one a Dell and one an old Toshiba. Never any problem with the Dell (and Gateway before that), nor the iPad, Acer notebook, etc. However, the Toshiba keeps losing the connection to Internet (even though the icon says the connection is excellent). DH has to continually Repair in order to connect. I even reformatted the Toshiba, thinking it was something in the Registry. Now that it is back up and running (and all programs updated), it STILL periodically has to be repaired in order to connect.