Linksys Wireless Router :: Access Restriction On EA3500 Does Not Work

Oct 23, 2012

I tested this with my laptop by setting its access restriction/parental control to always not access the internet. But still my laptop can still search through Wikipedia. Is this because of the router firmware? By the way I'm using the latest Connect cloud firmware.

View 7 Replies


Linksys Wireless Router :: E2000 - Access Restriction Shuts Down Access To All Computer

Jan 1, 2013

I have set up access restriction times for my son (we have wireless access for all systems).  I use the MAC address on his systems. Xbox, Kindle Fire and his Laptop. The MAC address are Correct. Here is the problem:
I set the "allow" and times from 6pm - 11:00 pm (while on xmas vacation) - the system works for a while he is shut off as i would like but....
After a period of time the entire house goes off line. I have to reboot the power on e2000 router and then disable the access restrictions. System then works. Problem is repeatable. What is the deal. I have updated firmware already. Otherwise the system works great. Never dies. Just when i set access restricions for a SPECIFIC time it kills entiore houese. BTW i can deny him outright 24/7 and the system idsables his access fine. Its just when i set specific times

View 3 Replies View Related

Linksys Wireless Router :: WRT120N V1.0.07 Access Restriction?

Jul 6, 2012

My Wireless-N Home Router WRT120N with version 1.0.07 seems to have a problem blocking Sites through scheduling with Access Restriction "Allow" ...I notice that... when I enable access restriction, with policy and some range of computers connecting to my router  , and set it to "allow" from "monday - friday" from  "8am-6pm" .. with a purpose of blocking some social networking sites, example facebook, It works perfectly fine. But when the "scheduled" time comes ( before 8am and after 6pm ).. I cannot access the internet.. router is working, it detects my modem.. but no internet connection. It always happen before and after the "scheduled time" before the configured access restriction takes over.  I have to disable the Access Restriction to continue our internet access. 

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - Access Restriction

Mar 19, 2012

target are rules of access restriction on WRT54G1.rule A- 07:00am~10:00am,internet access allowed, keyword blocked such as Facebook,mail.2.rule B- 10:05am~10:00am,internet access allowed, no keyword blocked.but fails to access internet after rule A expired.

View 1 Replies View Related

Linksys Wireless Router :: WRT110 - Access Restriction Bugs

Jul 23, 2009

we upgraded our router from WRT54G V5.0 to WRT110. before we dont have any issues using the ACCESS RESTRICTION from WRT54G but now on WRT110 we encounter a GLOBAL BUG. we are blocking the website like Youtube, Friendster, Facebook etc. on the EDIT LIST TAB we specify 4 IP Address that will not going to access the said websites.  The problem is...all Computers (about 15 PC) that are using the Internet cannot access the said website also but we did not enter the other IP's.

View 9 Replies View Related

Linksys Wireless Router :: WRT110 - Way To Access Restriction Anytime?

Dec 9, 2011

I have a WRT110 and in the access restriction settings  section the time is in military.  I try to set the restriction from 11:30 pm to 6:00 am.  I cannot because it tells me the second time "6:00 am"  has to be larger than the first.  I don't understand a way around this. 

View 2 Replies View Related

Linksys Wireless Router :: Wrt120n Showing Access Restriction Tab?

Oct 29, 2011

All the documentation for this router shows the Access Restriction tab in the router configuration menu.   It's the same as other linksys routers.  The current version of the firmware doesn't have this functionality.  Was it removed?  

View 5 Replies View Related

Linksys Wireless Router :: Cannot Access QoS On EA3500

Sep 7, 2012

For hours i tried to find info online of how to access QoS on EA3500 router. I cannot find it on the cisco connect cloud page.

View 1 Replies View Related

Linksys Wireless Router :: EA3500 Guest Access Keeps Going Down

Sep 7, 2012

The guest network on the router keeps going down. It can be seen but it cannot be connected to. Sometimes it works for a day or 2 and then it doesn't. I have to constantly babysit the network and it is entirely frustrating because the only fix is to reboot the router.I have tried factory resetting several times.I have tried re-flashing the fw.I'm using the non-CCC fw because CCC had way, way too many issues.These routers have been out for months and many people have been having issues and somehow Cisco doesn't see fit to work on firmware that stabilizes them at all? It's like, they release a router and then forget about it - the next batch comes along, often the same guts with a different shell and it's the same thing over again. I had a WRT610N and I said I'd never buy another Cisco after that but I broke my rule because of being lured by these "App enabled" features, which mind you have nothing at all over the competition since the CCC doesn't even work for most people.

View 9 Replies View Related

Linksys Wireless Router :: Ea3500 - Unable To Access Ftp

May 4, 2013

after updating to smart wi-fi I can't access the USB FTP or off network.Only way it's accessible is from the computer the router is attached to via network drive.FileZilla gives me this error....."Connection attempt failed with "ECONNREFUSED - Connection refused by server".I've reset the router same problem.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 - Unable To Access Cisco Cloud Connect

Jul 1, 2012

I just purchased an EA3500 because I absolutely need guest access. I set everything up through the Cisco Connect application on the CD and all was well. I figured it's time to get into the whole cloud connect app thing, as this is why I chose this router over another but after creating the account and activating through email, I constantly get the message that I need to associate my router with my account.The PC I am using is directly connected to the router through a cable. I'm not sure what else I am to do at this point. The content of the entire message basically is telling me to head to [URL] with the PC connected to the router that I want associated and to follow the directions. 
1. There are no directions... I get that message every time.

2. I've tried rebooting the router and then logging in to the website - that gives me a message saying there's no router detected, meaning that somehow the site IS detecting the router, I just somehow haven't associated it.

View 1 Replies View Related

Linksys Wireless Router :: EA3500 - Port Forwarding Interferes Internet Access

Jul 12, 2012

I recently opened the ports used by Xbox Live: Port 88 (UDP)Port 3074 (UDP and TCP)Port 53 (UDP and TCP)Port 80 (TCP)I am able to use xbox live once these ports are opened but once they are enabled, I can not get wireless internet. The xbox is connected to the router with a cable so it isn't experiencing this probem. My laptop and phone are able to identify the network and join but there is no internet access.
If I disable these ports, everything goes back to normal.

View 1 Replies View Related

Linksys Wireless Router :: EA3500 / Access Network Of First Router

Feb 1, 2013

I just bought a Linksys ea3500 and i'm trying to configure it.This is the case.I have a first router connected to internet and several computers connected to it.Then, I have a second router (ea3500) also connected to it.If i disable the dhcp and use it as an access point i can see all computers in the network.If if enable the DHCP it creates a private network and all pcs connected to this network can't see and access computers of the first network.The problem is that using EA3500 as an access point disables the most part of the features of the router.My question is: can i use it not as an access point (in order to have all features) but at the same time having access the first network and all computers on it?

View 3 Replies View Related

Linksys Access Point :: To Work The Wireless Repeater Mode Work With WPA2-AES

Sep 6, 2011

Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?

View 4 Replies View Related

Wireless Access Restriction By First Letter Of Username

Feb 23, 2012

We have 4 SSID's established for our staff, students, Guests and Providers. CISCO / ARUBA Managed APs with a centralized CISCO Controller. Can I restrict access by the first letter in the username so that usernames that begin with x will ONLY connect to the Staff SSID if in range and usernames starting with y ONLY connect to the student SSID?

View 1 Replies View Related

Linksys Wireless Router :: Can't Get Access Restrictions To Work WRT54G V3

Nov 24, 2011

I am trying to get a cell phone to have access to my LAN from 3am to 7am.  I gave the policy a name, allowed access, checked everyday and the time 3a to 7a.  Under edit list of PCs, I entered the MAC address of the phone, and I have also entered the MAC address of the phone on the wireless>edit mac filter list, though didn't know if I should.

View 2 Replies View Related

Linksys Wireless Router :: Can E3000 Work As Access Point Only

Jun 14, 2011

I needed the Guest access of wi-fi setup that LinkSysys routers provided. I don't need the router/modem i just want to have wi-fi access point. I'm an advanced user and i can work with manual setup etc.I tried to do a manual setup of the router, i changed the IP address to mask my network and enable wi-fi and worked BUT the guest access option is NOT available unless you use the stupid CISCO connect software.
Now the cisco connect software IS NOT working or complete the setup if you don't connect it through the router and gain Internet access which is IMPOSSIBLE for me to accomplish as my modem is connected to a firewall device and we are using static DSL options with PPPoE and usernameme/password. There is no way i can get cisco connect to load properly as it always "fixes my connection trying to gain Internet access".Is there any solution on manually properly setup this router and take full advantages of it capabilities or should i return it ?

View 7 Replies View Related

Linksys Wireless Router :: WRT54G Can't Access Work Group

Sep 9, 2010

With my WRT54G my network works fine.All my computers of Work group appears in Network (Windows XP and Windows Vista)With my new WRT610N, it is not the same :

- I can't access Work group
- A lot of my shared folders don't appears in Network (in Windows XP and Windows Vista)
- And 3 icons appears in Network of all computers : EGHN Qos Policy Holder DeviceEGHN Qos Manager DeviceEGHN QosDevice. [code]

View 8 Replies View Related

Linksys Wireless Router :: Wrt160n - All Of Sudden Access To R2 Ceases To Work

Nov 10, 2011

I am cascading a wrt160n (R1) and a wrt160nl (R2) which are hooked up LAN port to LAN port (via a DLink power line adapter).  R1 is hooked up via dhcp to the internet.  The whole system works wonderfully for several hours until all of a sudden wireless access to R2 ceases to work (though I still can access everything wired).  [code]

View 4 Replies View Related

Linksys Wireless Router :: Does Internet Access Policy Actually Work On E4200

Mar 7, 2012

I'm just about to trade-in an E4200v2 for a E4200v1, primarily to regain the "Internet Access Policy" capability.
Just wanted to do a reality check with those of you who tried/use IAP... does it work basically as advertised?
I would be using IAP to specify MAC addr's of devices, blocking them from certain URL's and limiting their hours of Internet access.
And I plan to have Linksys's DHCP Server turned OFF, since my Windows Server handles DHCP on my network.
Should I expect all of this to work OK?  No major reliability problems with IAP?

View 5 Replies View Related

Linksys Wireless Router :: E1200 - Access Home Pc From Work Through Remote Desktop

Dec 12, 2011

I have a new E1200 router.  I VPN from home to my work computer just fine.  since I can remotely access the router from work...what setup section of the router would I need to utilize to go backwards and access my home PC thru remote desktop?  NAT?  if so what are the instructions to do so. 

View 1 Replies View Related

Linksys Wireless Router :: EA3500 - Cannot Connect To Ftp

Feb 15, 2013

setup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.

View 1 Replies View Related

Linksys Wireless Router :: Ea3500 Lan But No Wifi?

Jul 18, 2012


HP Pavilion dv7-6135dx Ent Pc  Win7 Home Prem 64
Motorola Surfboard Modem
Linksys EA3500 Router
Netgear 10/100 24 port switch
my wife bought me this EA3500 for Father's Day this year.  It's only been hooked up for a couple of weeks (we were in the middle of a move during Father's Day), but now I have no wifi on either band.  My wife can no longer connect to it either.  We have tried completely resetting it, we have reset the modem, the switch, laptops, everything.  Still no wifi.  It worked out of the box, but now we have nothing.  Does HP needs a certain type of driver?  Our iPhones show connected and surf the brower's and FB app with no issues while in wifi mode, but then again, I can pull the ethernet from the internet port and the phone's still show connected (good job, iOS).Cable from main splitter runs to basement where the modem is located.  Modem ethernet feed up a wall to a wall plate where the router is.  Router then feeds back to the switch.  The switch then sends the IP throughout the house for the LAN lines, and the EA3500 feeds all of the wireless devices (used to).  So, Cable box, modem, router, switch.  Router is currently good for LAN only.  I am connected to it via LAN right now, 2 feet from my laptop.
In connections:IPv4/IPv6 both "No Internet Access"  (for IPv4, if you change a setting in the setup, it becomes "Internet Access" for about 3 seconds.)Media State: EnabledSpeed: Alternates between 72Mbps and 144Mbps

View 5 Replies View Related

Linksys Wireless Router :: Set Up Loopback On A EA3500

Feb 25, 2013

In my home network, I have a Synology. It has as local IP address on my local network and it can be accessed by internet with the dynamic domain name.So when I'm home, I have to use to access it, and when I'm away, I have to use it be possible to configure the EA3500 to redirect the domain name "" to when I use the domain name inside my home ?A friend told me that I had to configure "loopback" but I don't know how..

View 3 Replies View Related

Linksys Wireless Router :: Get External IP Address On EA3500?

Jan 22, 2013

I have a EA3500 wireless router with the new style (smartwifi) firmware.  I've scoured the web admin interface and can't find any sort of 'status' page that would tell me the external IP.  I've looked through the support docs but they only show how to find internal/local IP.

View 2 Replies View Related

Linksys Wireless Router :: Can't Choose DNS Server In EA3500

May 19, 2012

I have an EA3500. PPPoE connection. Can't seem to choose my DNS server (use Unblock-US) since the router insistently forces me to use the DNS from ISP.How can i work this around? I'm kinda tired of people asking me why i am changing the DNS. I want to change the DNS and that's final. It's a resource like any other and i want to use it.P.S: i tried most of the basic troubleshooting. I tried my old router back on and the DNS's works fine. I tried even conecting the old router re-routing the new one, and the other router manages the selected DNS's servers fine.

View 9 Replies View Related

Linksys Wireless Router :: Want EA3500 Original Firmware

Jun 28, 2012

If someone has the original firmware for the EA3500 to copy. I need to downgrade my router after Cisco sabotaged it with their Cloud Connect. This will be the firmware you have right out of the box. Be sure you go into the Admin. section and Save a Copy before you ever connect to the Internet. Also Uncheck the Auto Updates box or you will be fed the Cloud Connect (and its amazing Terms Of Service).

View 6 Replies View Related

Linksys Wireless Router :: How To Port Forward An EA3500

Aug 7, 2012

Windows 7 64 bit  /  Linksys EA3500  /  (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased  the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it to to port forward this Linksys EA3500? 

View 2 Replies View Related

Linksys Wireless Router :: EA3500 HDD File Corruption?

Mar 5, 2013

I have recently bought a cisco EA3500 router for my home network and i am pretty surprised to see that a router from the world leader in the networking domain cannot perform as expected.
The first problem i had was that the network (wired and wireless) was dropping from time to time for a couple of minutes with the power led of the router blinking. I turned off the log feature of the router and it seems that until now the problem is resolved.
Now, the second and, at least as annoying as the first, is that i have a 640gb usb hdd connected to the router, formatted NTFS. It seems that every now and then a file gets corrupted, that is, it is transformed into a folder! And it cannot be recovered without pulling out the hdd and using a 3rd parth software for file recovery.
I have the latest firmware. Should i switch back to the classic firmware instead of the "fancy" new one? I really need my files on that drive, so i cannot risk loosing them in this random manner.

View 4 Replies View Related

Linksys Wireless Router :: Using EA3500 In Bridge Mode?

Feb 16, 2013

I bought the EA3500 nine months ago mainly for the USB port (for a NAS). I recently replaced Comcast Cable with Verizon FIOS. So I now have the FIOS router as my main router (its' IP address is I put the EA3500 in bridge mode to extend the (wired) network. I could get: After going in to bridge mode (with DHCP), I can not log in to the EA3500 (IP address assigned by the FIOS router). I connect my computer directly to one of  the EA3500 numbered ports (after various combinations of rebooting EA3500 and rebooting PC). It just continues to say "waiting" and never logs in. Tried choosing a static route (tried both and with, gateway and DNS1 = with no luck.Since I can't log in, I cannot set up my NAS on the USB port of the EA3500 (so I haven't gotten far enough to determine if the USB port will even work in bridge mode).Thought about ensuring the latest firmware but since I can't log in I can't do that. (And after a hard reset EA3500 IP address is which creates conflict with FIOS)

View 9 Replies View Related

Linksys Wireless Router :: EA3500 Cannot Connect USB Printer

Jun 24, 2012

I am unable to connect a printer using the USB port on my new Linksys EA3500 router.
I followed the directions here: Support Page , but my verison of Cisco Connect does not have the option to "connect a USB printer".
I am on a macbook pro running OSX 10.7.4 and my verison of Cisco Connect is 1.4 (12005.2). My router's firmware version is A screenshot of what I see after clicking "add a device" in Cisco Connect is below. The printer is an HP DeskJet F4280.

View 9 Replies View Related

Linksys Wireless Router :: EA3500 Via CCC Is Difficult To Connect

Aug 14, 2012

After using the newest firmware for CCC, I've found it is very convenient, but only in some ways. Now, I think I find it is uncomfortable, very disappointed and waste lot of times. Each time I try to access to CCC, it took me like 5 mins to access the web page. I understand is use when you are outside of your home network, but when I access it directly from my home (local IP), why should I need to connect via a CCC(?) I want a local connect to my router which is a faster access than via a server.
Sometimes, connect via an IP of the router, it say can't connect because of internet connection down, but actually I can still access internet except access my own router. I like the easy setup of CCC but maybe I need to switch back to non-CCC?

View 9 Replies View Related

Linksys Wireless Router :: EA2500 Won't Connect To EA3500

Apr 30, 2012

I bought a new router today because my WRT54GL was giving me some fits. I purchased an EA3500 and I'm using an EA2500 adapter on the desktop since the router can't reach it via ethernet.  Some of my early troubles with this combo began with not being able to test upload bandwidth.  It would just time out and give an error via the built in Cisco (OOKLA) utitliy and through after which, the network would show no internet access and I'd have to reset the adapter.  After trying to troubleshoot that issue it grew into zero internet access for my desktop however my Nexus would have wifi access without issue.  If I'd startup in safe mode with networking I'd have net access shortly and then it would quit about 30 seconds after startup.  I've tried uninstalling all drivers for the wireless NIC and the Cisco Connect software while doing everything manually but nothing changes.  This PC simply won't gain internet access with the EA3500 or even allow me to access the router through the default gateway IP.  I've since put the WRT45GL back in place and I have access again with my EA2500 adapter.  I should note that with the EA3500 in place, if I disconnected from my wireless I couldnt see any networks until I unplugged the adapter and reinserted it into the USB port (i've also tried many different ports).  I've named the SSID's of the two routers differently, tried a manual setup of the wifi, tried the CD setup, the wifi protected setup, no security, and WPA2 to no avail.  I can't seem to get the EA2500 adapter and the EA3500 router to get along.  I'm running W7 x64 Pro.  

View 6 Replies View Related

Copyrights 2005-15, All rights reserved