I have prolem with Dir615 I doesn't know how to configure it to use for file sharing outside Lan. The problem with Dir615 I'm sure because when I swicth Dir615 to Dir100 it's works perfectly. Is there any magic box where should I mark tick?
View 3 Replies
When I was using my Linksys router, I had no difficulties setting up Windows File Sharing on my computers but since I upgraded to the DIR-655, file sharing have hardly worked. Sometimes I could get one of the computers access files on another, but not the other away around. Most of the time, none of the computers have access to the files on any of the other computers. Two of the computers run Windows XP and another one runs Windows Vista. All computers are on the same workgroup and able to connect to the internet through the router. When calling D-Link tech support, I am told that they dont support file sharing and that I had to contact each computer's manufacture's tech support on the instructions on setting up the file sharing (each computer is from a different manufacture). One of the tech supports did drop the slight hint that I needed to recreate the home network, but when I tried to do that, all I could find is the settings to connect to the router (which I had set up when I installed the new router) and to enable file sharing (which is already done) and to assign the workgroup, which they were all are already assigned to the same group.
View 8 Replies View RelatedRegion : Others
Model : TL-WDR4300
Hardware Version : V1
I want to get cleared is the routers which have USB sharing option like WDR4300, WR2543ND and WR1043ND (I know it's the wrong section to mention this model but I also have this one in my list.). How much users can connect to the USB drive at a time?. I'm talking about 40 or more than 40 users here. Can these routers handle the load on the USB port?. Would there be any problem if nearly all of the users are connected to the USB drive at the same time?
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Firmware Version:
3.13.23 Build 121225 Rel.37950n
Hardware Version:
WDR4300 v1 00000000
Since I upgraded to the latest firmware I can only use the USB storage sharing when "Access shared storage with password" is left UNCHECKED. If I check the box I can no longer see the storage shares in Windows 7. I have also tried "\tploginlink.net" in the Run box, and it connects but shows me no mounted volumes. Also, Is it possible to set up more than two user accounts in addition to "admin" and "guest"?
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL
I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.
I am replacing an A3 that's slowing dying with a B1. I understand the Firmware versions are different but I was curious if I can save the config file from the A3 and load it into the B1 ? I don't know if the config file includes the Firmware....
View 2 Replies View RelatedI am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies View RelatedI'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies View RelatedRegion : France
Model : TD-W8151N
Hardware Version : V3
Firmware Version : latest
ISP : OrangeF
Received today my modem, configured it with some effort but it works... Now i'm trying to save ma config file (rom-0) using web interface, and when clicking on Maintenance > Firmware, i'm always getting:bug.jpg Seems to be a big bug
[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies View RelatedBefore I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies View Relatedour workstations provide data (files) to this network by using RDP. RDP allows a user to share the entire contents of one's C drive. I dislike this and many others in my organization also dislike this (from a security threat point of view). I am looking for an alternative and more secure approach.
View 5 Replies View Relatedrecently i was trying to share files between two computers using a networking switch.(windows xp) I tried using network setup wizard on the host computer it only gave me two drive options f drive and the floppy disc drive. so i selected f drive to copy files. I inserted a cd and clicked next but nothing happened. i tried clicking format button and it asked me to 'insert a cd to f drive' so I avoided the format button.My computer has a backup system which someone installed and im not too sure about it so I was wondering if f drive was referring to the backup system (sort of looks like an external hard drive with lights on it connected to modem) or maybe referring to usb port. I did not try using my usb yet. The second pc I noticed did not have network setup wizard on control panel and was not sure if i needed it. I heard that a router has a firewall and is more safer than using a networking switch. at this stage i dont need internet connection for the second pc
View 1 Replies View RelatedOk, I have a new win 7 pc and my old win xp pc has all my video and picture files. On both of my xp pc's i can transfer files via my network places. Can I and if so how do I do that from the xp pc to the win 7 pc? I can stream the videos from the xp on the win 7 but not transfer them.
View 17 Replies View RelatedI installed windows server 2008 in another country with active directory - DNS server - file services Roles. with public IP.I can RDC the server - I can ping IP local and WAN - I can ping computer name from Local only not WAN.I can access the shared files locally using \IPaddresssharedmy problem is that I can't access \IPaddressshared from outside the network.[CODE]
View 3 Replies View RelatedI've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network
View 1 Replies View RelatedI remote from home through a vpn to work. that works fine, but i want to be able to copy and paste files from work computer to my home computer. I've tried it and it doesnt work, so i know theres a setting somewhere, but where is it!?
View 3 Replies View RelatedPC A is connected to 3g wireless router and and 3g dongle is conneccted to the router.(dongle ip belongs to a vpn).I have added PC A to router's DMZ, so that all the requesta coming to the router through the dongle (vpn ip) are forwarded to PC A.(Now I can access PC A with the vpn ip(dongle)).Now what i want to do is to access the shared files and folders in PC A from a remote network which is connected to the vpn by using the dongle ip.(ex: \[dongle ip] should display the shared files and folders of PC A.)
View 11 Replies View RelatedSo what i want to know is, is it possible to file share only using a switch? At the moment I have 5 xp 1 switch (with ethernet cables) No router and no internet (the no internet can not be changed).
Will i have to set up individual ips manually (192.168.1.1/2/3/4 etc and then create a home network using the wizard and create a network disk.
Or save our time and get a router
I've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.
I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"
I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.
I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network.
Setting up file and printer sharing pass through a router...in different OS.
View 2 Replies View RelatedI have XP sp3 on my desktop and a new netbook with Win 7. I have set up wi-fi networking between them and have had some success of sharing a file. Today, I wanted to share my Firefox profile from my desktop to my netbook. I clicked on share this folder and could not find it on my netbook. I did a search with the title and nothing appears.
View 12 Replies View RelatedThe Windows XP SP3 PC can login to the Windows 7 PC's file shares without a problem.But, the Windows 7 PC cannot login to the XP PC's file shares. Using the GUI I always get error code 0x800704b3. Using the "Net Use" command I always get "System error 67 has occurred. The network name cannot be found."This problem occurs regardless of whether I try to connect to the Windows XP PC by network name or IP address.On the Windows 7 PC I can successfully ping the Windows XP PC by both network name and IP address.
View 8 Replies View RelatedA desktop running XP, connected via ethernet to a linksys E1200 router that is connected w/ethernet to satelite modem. And a Laptop running Windows 7 that is communicating wireless to the router.Question: Can I share files between the two computers this way, or do I have to get a cradlepoint router?
View 3 Replies View RelatedI remote connected my office computer to my home laptop using VPN. I want to share a folder in my home laptop to office network. I shared. i can see the sharing in my laptop network. But when I remote office computer, I cannot find this folder shared in network. How can I do it?
View 1 Replies View RelatedMy first PC (XP) is attached to a wireless router via an Ethernet cable and my second PC (Vista) is connected to the same router via wireless. I have shared the files on both PC'S and can access the files of the Vista PC from the XP PC but when i try to access the files of the XP PC from the Vista PC i get the following error :
"\Studyoot (C) is not accessible. you might not have permission"
No Network provider accepted the given Network Path.
What I want to do is set up file sharing on both of my laptops so that they can share files both ways between them. I have in total 6 computers on my home network, and would like to limit the access to both to just the ones I want. I got about halfway before I hit an issue. My Windows 7 Ultimate is sharing both of its drives to my XP Home laptop, while being password protected for access from the other computers on my network. My XP Home Laptop cannot be shared without all the computers on my network having access too
View 4 Replies View RelatedI have a laptop running windows 7 and everything was working fine for file and printer sharing but all of a sudden the network printer just came up as offline and I can't access the network drive/printer on my Laptop but on my desktop where I have the printer plugged into everything is fine and the printer is online and is being shared. Both computers are running windows 7 and when I run the network diagnostics on the laptop it just says file and print sharing resource ( my PC ) is online but isn't responding to connection attempts
View 2 Replies View RelatedI access my files off of my desktop on my laptop, 360, and PS3 but now I cannot. I haven't made any significant changes to either computer.I've tried a ton of different things. All of the folders I want to share are set as shared. All of my sharing options are turned on in the Network and Sharing Center However, when I click on "Show me all the files and folders I am sharing", I see Pictures, Videos, and Music but I don't see the other 2 folders I have set as shared
View 1 Replies View RelatedI can't upload on file-sharing sites , I have tried to upload on wupload.com , fileserve.com , ****file.com and other sites and I click to upload but the progress don't start only stay in 0% I have waited 3 hours to upload a music with 150 MB and still in 0% progress .
View 5 Replies View RelatedMy Sony video camera saves in .m2ts. I need to convert the file to .avi for editing. Is there freeware available and what should the settings be for the best quality. Can PMB � Picture Motion Browser export to AVI?
View 1 Replies View Related
