D-Link DIR-655 :: Version B Running Stock 2.0 Firmware - Cannot Connect To Internet
Aug 17, 2012
I have a DIR-655 Version B running the stock 2.0 firmware and a Motorola SB6120 cable modem and my ISP is comcast. I have had comcast come out and test my line and everything is fine. I have a desktop directly wired to the internet and several portable devices accessing the router.I cannot connect to the internet. My network is available and none of my devices ever indicate the network isn't available. When I try to load a website it just says "waiting for reply..." and nothing happens. The solution that always works is rebooting both the modem and the router. What is odd is that this problem comes and goes, I will go a week with zero issues, then I go all week with rebooting my stuff 5-8 times a day..What have I tried? I tried the settings that are recommended by Furrynuts to users complaining. I have also tried changing the wireless band settings to different channels as well.
View 6 Replies
ADVERTISEMENT
Dec 7, 2011
I recently updated my firmware to dd-wrt... now I would like to switch back to stock firmware. I don't like the fact that any change I make basically resets the router. Plus DD-WRT GUI is VERY slow for me?I've followed every tutorial on how to do this, but the router will not accept the stock firmware. I've gotten the image to upload (according to the browser), but at 100% the flashing orange light & globe light just continue to blink & do nothing. I never see the other lights "flash" confirming the upgrade has took.  I've set my IP manually through "Network Connections>Properties>TCP/IPv4" before trying. I get to the emergency firmware page...set it upload Version A1. Sometimes it uploads...but like I said, it never takes.
View 11 Replies
View Related
Sep 10, 2011
I have a Netgear WNDR3700 v2 that I loaded with dd-wrt (v24-sp2 std). The only real problem that I am having is with the wireless. I can't get anything to connect at 300mbps. Even if I set it to n only it still only connects at 54mbps. Right now I am running it with encrytion off to rule out that causing any problems. and yes it would connect at 300mbps with the stock netgear firmware.
View 3 Replies
View Related
Mar 13, 2013
I'm running firmware version 1.1.28.14856 on EA6500 series.
View 4 Replies
View Related
Mar 10, 2012
I've assigned an ip address to my htpc using dhcp reservation. On my old router I could use the client name, for instance: ssh name@clientName Instead of: ssh name@ipAddress Currently I cannot do this with the stock cisco firmware (unless I'm mistaken). Is there something I have to do to get it working? Or do I have to resort to tomatoUSB/WRT.
View 1 Replies
View Related
Feb 14, 2013
Writing this hoping to see how DLink intends to respond to this very large hole. As someone who works in security this is 2 week old news to me but is probably new to everyone else "Hopefully not dlink devs".
So the DIR 825 along with millions of other routers are vulnerable to an outside upnp exploit basically means somebody from outside can root your router and for example open up whatever ports they want. Upnp has its own issues but it useful for those who don't want to open up a port every time some app might need a specific port but was never meant to be accessible from outside your network, Until now.
This is not some bizarre proof of concept or something that is even hard to pull off and what it would give is access to your entire private network and everything that might entail. You can test if your router is vulnerable at this link. It's owned by Steve Gibson. Many of you probably know of him, Somewhat of a celebrity in the security world. There is a upnp exposure test you can do right off the main page. It also explains whats happening and even shows you the code being used, Quite fascinating actually.
View 7 Replies
View Related
Feb 7, 2011
I set up my new WAG320N yesterday. I have no problems connecting with my notebook running windows 7 or my IPad. My Mac Mini running Mac OS x version 10.6.6 simply won't connect.
View 1 Replies
View Related
Dec 11, 2012
what is the latest firmware version for d-link dir-825? It tell me that i currently got the 2.60VT, is it the last one? If no, where can i download and how the latest version?
View 14 Replies
View Related
Sep 23, 2012
My firmware version 2.00NA (shipping version) is still working well.
When I selected 'Check online for any latest firmware' using the existing firmware, I got a message that that v2.07 (dated 2012-2-21) is available. Until now the router's check has always reported that I have the latest version.Â
I need to find out from other persons whether or not v2.07 is a real upgrade or is it full of bugs. I tried it once a long time ago and Shareport didn't work at all. Immediately I re-installed v2.00 and I've been pleased with the original shipping version.Â
What's the scoop on v2.07?
View 5 Replies
View Related
Nov 12, 2012
Recently he was having connection issues so decided to upgrade firmware and for some reason he did it through the management console (clicked the update to have it download the new file automatically and instantly upgrade instead of doing it manually himself). Told him not to do that anymore. Anyway, it wiped the existing firmware obviously and did not update to the newest. I came over to find it wouldn't connect at all. I was able to get into the reset console (hold reset while powering on, manual set IP on computer to 192.168.0.2 and gateway to 192.168.0.1 an then pointed the browser to 192.168.0.1).This window shows the current firmware as version 1.0.0.1 dated in 2007.I had downloaded the version 3.0 firmware and the most recent version 3.13 and had them on a flash drive, dropped them on the hard drive and attempted to flash first the newest and then the 3. Neither one would take and the router remains down. The page itself never changed after hitting SEND to upload the firmware, the browser displayed a progress bar for "uploading" and hit 100% then just sat saying "waiting for response from 192.168.0.1" until the browser timed out after several minutes.
View 4 Replies
View Related
Jan 8, 2011
Where the list of changes for the latest firmware version can be found? My new DIR-655 has firmware from May 2010, and I see the latest and greatest on the DLINK website is from September. But it doesn't state what the changes are, so I'm not sure if I should upgrade or not.
View 8 Replies
View Related
Jul 17, 2011
I would upgrade the firmware before deciding to replace router with a new one. I noticed there have been several updates to the firmware since I originally installed the router with the current available firmware version of 1.35NA.
View 12 Replies
View Related
Feb 9, 2013
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : [/COLOR]
Region : United Kingdom
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : Plusnet
I bought this recently on EBay and it works fine. I have just checked the firmware version and it displays as 120703 rel 29722. This version doesn't appear amongst the downloads - the most recent is 120427. Has somebody upgraded to the wrong software? Should I upgrade to 120427?
View 1 Replies
View Related
Feb 26, 2013
Region : United-States
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
my Firmware Version is chinese i can't understand it.i go to tp-link.com go to support the last version is older with compare are old.
View 3 Replies
View Related
Apr 20, 2013
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 130325
ISP :
I have the firmware v130205 and the latest 130325 does not load as its size is too much by some bytes.(4096 vs 3969 expected.)
View 8 Replies
View Related
Aug 2, 2012
I am trying to assist my sister with her BEFW11S4 Wireless Router. It has been working fine until this week! The Firmwre is version 1.50. The main router is not connecting to the internet, yet the 2 wireless adapters for their other 2 computers are! It shows that the main one has a connection but when you bring up any Internet Browser it says it can't find the connection. We've checked the settings and they are all correct. We even turned the firewall off and that didn't work!Â
View 1 Replies
View Related
Apr 19, 2011
I'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
View 4 Replies
View Related
Nov 8, 2012
I'm not able to get my DIR-615 running... that's the case:Cable Modem works fine with Internet Access - LAN Cable to my Windows Laptop.Bought a new D-Link DIR-615 and plugged the LAN Cable from the Cable Modem to the "Internet" Port on the 615. Second LAN cable from Port 1 to my laptop for config of the WLAN SSID and WPA2. Unplugged it and here we go, I can access the 615 via WLan Connection. But... I have no Internet Access over Lan or WLan. The 615 gives me options to setup Internet with the cable/ISP information. But this is done by my cable modem, isn't it ? What do I have to do to get it running? enabled and disabled DHCP, made Reset, latest Firmware 8.02 is installed (out of the box).
View 1 Replies
View Related
Feb 27, 2013
I've downloaded Prime Infrastructure 1.2 eval and wanted to see what it looked from WCS that I am currently using to manage the wireless network and I added the WLC (4404) device but it list the device as "Managed with Warning" and I can't find what the warning is.Â
View 3 Replies
View Related
May 1, 2012
I have 2x WLC 5508 running version 7.2. 1st one is setup and running. My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?
View 4 Replies
View Related
Aug 23, 2012
I need to confirm that the 4510R+E switch with the SUB7-E/2 running version 15 IOS will not support NAT. I am 99% convinced that it does not but i am looking for confirmation, as i am a bit surprised by the lack of NAT support on this platform.
View 0 Replies
View Related
Jun 3, 2012
I have several older 2950's running on my network. This one in particular became of interest to me because I couldn't set up SSH on it or enable any QoS features on it, so I did some research. What I found was there are basically 2 versions of the IOS, c2950-i6q4l2 or c2950-i6k2l2q4. I also read that the c2950-i6q4l2 IOS versions (like the one in the switch I am referring to) have both the SI and EI feature sets integrated, but the one that gets enabled is entirely dependent upon the switch model you are running it on. Did I understand this correctly? Does the IOS check the hardware on the switch and then decide with feature set to use? If so, what is prohibiting the EI feature set from being enabled on this switch? Is there a way to force the EI feature set to be enabled since it is integrated in this image?
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 07-Jul-08 23:39 by amvarma
Image text-base: 0x80010000, data-base: 0x80570000
[code]....
View 8 Replies
View Related
Apr 1, 2013
using a Cisco 5508 controller (code version 7.4.100.0) with an ACS appliance running version 4.1 or 4.2?I've found that the ACS constantly reports a 'Bad request from NAS' (Invalid message authenticator in EAP request). message. This usually indicates a mismatched shared secret but this isn't the case.The controller works fine opposite a Microsoft NPS Radius Server.
View 6 Replies
View Related
Jan 9, 2012
I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies
View Related
Apr 22, 2012
I bought a 7" netbook with Windows CE Version 6.00 (build 3122). I can't figure out how to connect to the internet. The instruction manual says to click on the wireless icon, which brings up a window that, in the picture in the manual has three tabs, the third being "wireless information", but on my netbook that window only has two tabs. The "wireless information" tab isn't there and that's what I'm supposed to go to to connect to the internet. What do I do?
View 1 Replies
View Related
Dec 13, 2012
in connecting my Hp Desktop to the internet. The PC is connected to my home network and I am able to download my email, I am able to print from the PC to my wireless pronter over the home network. All other PCs and devices in the hosue connect no problem.I have tried numerous solutions but still unable to resolve. I tried to hard wire it to the network, but I get Local access only. I am using Windows 7 operating system. I am connected to a netgear router.
View 8 Replies
View Related
Mar 10, 2013
the computer is a dell it runs vista, it says its connected but wont let me access internet. I dont know a whole lot about this stuff.at the network and sharing center it showes im connected to the network but that the netywork is not connected to the internet. all other devices in the house are connected fine and running great.
View 1 Replies
View Related
Nov 2, 2011
I have the DIR-655 . I decided to do a firmware update to Firmware Version: 1.35NA and now I having a problem connecting remotely from outside the network to a computer on my LAN. I use a software called Radmin to connect to one of my LAN computers behind the DIR-655 router and now since I did the update I cannot connect because the router is blocking the request, here is the router log info
[code]...
View 2 Replies
View Related
May 21, 2011
I have one computer that is unable to connect to the internet. This is a wired desktop running Vista. I have several wireless devices around the house that can connect fine, so I know that it is not the internet. I have tried a system restore, I have reset the router and rebooted the computer. The network diagnostics says there might be a problem with one or more network adapters on this computer....I have tried all of those solutions as well. When I look at the device manager I see a yellow exclamation point beside "isatap.domain.invalid". Does this mean that my network card is out??? Computer is now out of warranty
View 12 Replies
View Related
Nov 10, 2011
I'm setting up a new computer and I'm having trouble getting it connected to the internet. It's an Acer (model: Aspire M3910) running Windows 7. I have it plugged into a jack that I know works (other computers can connect on it), but when I type in ipconfig, I get this:Code: C:Usersamy delvecchio>ipconfig. [code]
View 10 Replies
View Related
Jun 24, 2012
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies
View Related
Feb 22, 2011
ok so my moms computer (compaq fs7600) had vista an it went nuts so i wiped it an installed xp pro. Everything went fine but now it wont connect to the internet =/. I have a Belkin Wireless router and an Arris high speed modem from Brighthouse. When i checked the cmd prompt it said that the media is disconnected an network connections said that it was unplugged, but everything is plugged in
View 3 Replies
View Related
Mar 13, 2013
I cannot connect to the internet via the wireless network from my router. Currently, I can connect to the wireless network, however I cannot access the internet, but I am able to access the internet with an Ethernet cable in the same router. This is a fairly recent development as we have used this router for wireless internet access (our modem has a wireless network built into it, but it is unreliable) for upwards of 8 months now without problem. One day it simple restored itself to the default name and we were no longer able to access the internet through the wireless portion.
Router: WRT54G Version 6.0
View 2 Replies
View Related
