Cisco Security :: ASA 5510 - ASDM Fails To Load On Mac OSX 10.7 Running Java Version 1.6.0_33
Jun 24, 2012
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies
ADVERTISEMENT
May 26, 2011
I've tried 3 different machines including a server.
Basically when I try to access my ASA 5510 with the ASDM software the software never loads. So I have tried to access it through the management port https://192.168.1.2 and installed the software. The software starts up, I enter the password and it connects and loads to 100% but doesn't go beyond that point. I then try the java applet, and it as well loads up to 100% and says "Please wait, the main is coming up."
I have http server enabled, and asdm image is pointed correctly
As I said, I've tried this on two Windows XP machines and a machine running Server 2008.
I can connect through CLI all day and all night, but I'd rather (read feel much safer) configuring it through ASDM.
Here is some system version info
Cisco Adaptive Security Appliance Software Version 7.0(8)
Device Manager Version 5.0(8)
Compiled on Sat 31-May-08 23:48 by builders
System image file is "disk0:/asa708-k8.bin"
View 4 Replies
View Related
Oct 18, 2012
My macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies
View Related
Feb 15, 2012
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
View 6 Replies
View Related
Oct 16, 2012
So (foolishly) I let the software updater delete Java 6 (which only Apple provides), and I installed Java 7 from java.com. Was running ASDM 6.4.9, all I got was the Java 7 splash box. Updated ASDM to 6.4.9-103, same problem.
I can run ASDM in one of my VM's, but it's a pain.
View 1 Replies
View Related
Aug 22, 2012
yesterday I tried to connect to our ASA 5520 using ASDM Launcher, which has alwasy worked before. For some reason ASDM Launcher is no longer working from both my Win XP desktop and Win XP laptop. I can open ASDM through the browser but not the launcher. Both desktop and laptop have Java 7 U 6. I'm not sure if I can back rev my Java.
View 4 Replies
View Related
May 21, 2013
I have an ASA 5510 in a live environment. Up til a short while ago I could access this via the ASDM and ssh. However I can no longer connect to it via eithier. When I access It via SSH I get a disclaimer saying the following
*** You have entered a restricted zone! Authorized access only!!! Disconnect immediately if you are not authorized user! ***
It then cuts me off.
When I try to access the ASDM I get the following
The firewall is running all its services without a problem and I can ping the device without any issues. Also none of the config (to my knpowledge has been changed). I set up a console session and http server enable is still there with
http 192.168.200.0 255.255.255.0 inside
View 4 Replies
View Related
May 16, 2013
ASDM access to 5500 using Java was just a frustrating experience. If you manage only one device you may not notice the pain. But if you are managing multiple devices with some device 'forbidden' to update ASA firmware,
I spend few days looking at the issue and came to a conclusion and decided to post to guide all newer VPN admins who will go through the same pain and hopefully we can reduce some combined wasted time.
Recommended Beginning Setup for New Admin :
[code]...
View 2 Replies
View Related
Jul 1, 2006
how to disable XAuth for Remote VPN users on the ASA 5510 running 7.2(1)?
HPMFIRE(config)# tunnel-group vpn3000 general-attributes
HPMFIRE(config-tunnel-general)# authen
HPMFIRE(config-tunnel-general)# authentication-server-group none
ERROR: The authentication-server-group none command has been deprecated.
The isakmp command in the ipsec-attributes should be used instead.
--[code]....
I couldn't find anything under isakmp to disable it.
View 2 Replies
View Related
Mar 23, 2011
We have a WEB VPN running on Cisco ASA 5510 (SW = 8.2.1 / ASDM SW = 6.2.1). There are multiple internal (Web) applications are published on it and are working. One of the Web Application is working from internal network but from outside (or internet) through Web VPN, it is getting stuck and trying to load JAVA version. It is to be mentioned here, the latter web application is required Java Version 1.4.2 while the working applications are working with Java 1.5.1.
Is it possible to mount the more than on Java version on Cisco ASDM to be worked together ?
View 1 Replies
View Related
Feb 6, 2013
I have an ASA-5505 which I have been managing using ASDM from a PC and a Mac.I just happens that the Mac has not been used in a little while and when I tried to use ASDM on it, it fails.I've had a trawl through various posts and release notes (after updating various components in the process, incl Java with all the diabling/security updates of late) but am still having the problem and this is where I'm at:
- the ASA runs v8.4(2) and ASDM 7.1(1)52
- release notes state that ASDM 7.1 should work on Java 7 on Windows 7 and MacOS 10.7
- ASDM starts fine on my Windows 7 PC running Java 1.7.0_13
- I am also running Java 1.7.0_13 on MacOS 10.7.5
- on MacOS, ASDM starts, asks for credentials, download/refreshes the cached app... and then crashes with the following exception message:
The root cause of the issue seems to be that a Java class called apple.laf.AquaTableHeaderUI is not found..Now, I don't know much about Java, but that seems to be an Apple UI related class - I presume that it would be good to use this to give ASDM a more native look and feel, but why on earth is there no fallback? or am I missing something?
View 4 Replies
View Related
Mar 4, 2013
I am getting some problem with ASA WebVPN browser, in some website I cannot show links or part of the page. Is there some applet java that i cannot import in "client-server plug-ins"? I've found only java plug-in for remote access.
View 1 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
May 26, 2013
I was going through the release notes on cisco website of ASA 8.4.6 and ASDM 7.1.3 but I just can not find a definitely answer: if ASDM 7.1.3 can run with 8.4.6?
View 2 Replies
View Related
Feb 3, 2013
I'm trying to access ASDM but everytime I put in the IP address I just get cannot display webpage: Here is the copy of my configuration
ASA Version 9.1(1)
!
hostname ciscoasa
[Code].....
View 1 Replies
View Related
May 10, 2011
i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies
View Related
Jan 28, 2013
I have a new 5585x with only basic ip information on it. I can't get the ASDM to load from any interface. Browser just says cannot load page. I upgraded to 9.1 and ASDM 7.11-52. (Also did not work before I upgraded) I can ping the managment 0 interface and can tftp data to and from it. Also unable to telnet to the management interface. [code]
View 2 Replies
View Related
Jan 20, 2013
I've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24. I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under management i've added the VPN network of 192.168.50.0/24 to have access to ASDM, but still does not work.
View 1 Replies
View Related
Aug 14, 2011
I recently upgraded Java to JRE version 1.7.0 and now when I try to login to the ASA 5510, I get the following message in the java console log.Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: sun.security.ssl.X509TrustManagerlmpl cannot be cast to com.sun.net.ssl.internal.ssl.X509ExtendedTrustManager at com.sun.deploy.security,X509ExtendedDeployTrustManager.<init>(Unknown Source)
View 5 Replies
View Related
Mar 20, 2013
I am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
View 3 Replies
View Related
Feb 17, 2013
We are running an instance of LMS4.0.1 on a Windows 2008 Server installation that is managing circa 2k devices. A couple of weeks ago we run into disk usage problems as a result of log files not being rotated properly - this issue has been fully resolved.
Since then, we have been unable to restart our DCRServer and this is becoming a real issue for us.
The output of a pshow DCRServer is below ...
C:Usersmodonovan>pdshow DCRServer
Process= DCRServer
State = Waiting to initialize.
[Code].....
Continuously the State will be "Waiting to initialize". Several restarts of the daemon and the server itself have made no difference.
View 1 Replies
View Related
Feb 22, 2011
I have an ASA 5520 running version 8.2(1) and I am having an issue with ASDM sessions.I can SSH into the ASA and have tried to clear the sessions but they do not clear as per below.
largoGW# sh asdm session0 dguselnx1 dguselnx2 dguselnx3 dguselnx4 dguselnxlargoGW# confi tlargoGW(config)# asdm disconnect 0largoGW(config)# asdm disconnect 1 largoGW(config)# asdm disconnect 2largoGW(config)# asdm disconnect 3largoGW(config)# asdm disconnect 4largoGW(config)# exitlargoGW# sh asdm session0 dguselnx1 dguselnx2 dguselnx3 dguselnx4 dguselnxlargoGW#
An interesting point: the host dguselnx is my linux based computer that I am using to SSH to the ASA. I do not connect via ASDM from this device so it is strange that the hostid for the asdm sessions is showing as my linux host and not my Windows laptop (that I am trying to connect via ASDM from).
View 5 Replies
View Related
May 27, 2013
so we have been using our current ASA5505 for a long time. Since it only support up to 10 VPN licenses, so we buy a new ASA5505-SEC-BUN-K9(support up to 25 users).
the old ASA are running: 8.0.3 and ASDM 6.0.3
the new ASA are running: 8.2.5 and ASDM 6.4.5
I thought it would be simple as export and import the config file, but when i tried to restore, the new one is looking for a zip file but the old one doesn;t backup file in ZIP. It looks like i need to update the ASA version or/and ASDM?
I am pretty new to this and never upgrade any of these versions since I am aware of the upgrade may mess things up. So do I need to upgrade both the ASA version and the ASDM in order to restore my config? any effect if i do the upgrade? I also read some articles, we need to upgrade on the version one by one, like 8.0 to 8.1 then 8.2?
View 4 Replies
View Related
Feb 1, 2013
I am having this problem trying to connect to my university network trough the vpn client from a pc running Windows 7 Ultimate 64-bit: the client connects but I have no Internet access. I first believed that the problem was related to the fact that I had ZoneAlarm Free Antivirus+Firewall installed, but I made several steps, including the complete removal of the ZoneAlarm product, and I still have the same problem.
Here's what I see in the log:
Cisco Systems VPN Client Version 5.0.07.0290
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7601 Service Pack 1
[code]....
Using the same client (32 bit version) in another pc of my lan which runs Windows XP and that had never ZoneAlarm installed on it, I have no problems.Also, using Shrew Soft Vpn Client 2.1.7 on the problematic pc I can connect to vpn without problems, so I am really stuck trying to understand what's wrong with Cisco Vpn Client.
View 6 Replies
View Related
Oct 30, 2012
My internet at times fails to work. I will be browsing and webpages will fail to load until I wait 30sec or so and refresh the page a few times. This happens every 3ish minutes. However, I am still connected to wi-fi according to my computer and there is still internet access (at least it says). I can also disconnect from wi-fi and reconnect and the problem goes away momentarily.
I know this happens on Chrome and IE, so it is not the browser. And, the internet is just find on other computers at my house so I do not believe it is the router.
View 6 Replies
View Related
Apr 19, 2011
I'm not sure how to tell if I'm running ssh version 1 or ssh version 2, or both.I thought a show run would show a line like, "ip ssh version 2" or "no ip ssh version 1", but I don't see these anywhere.
View 4 Replies
View Related
Nov 24, 2012
configuring the ASA particulary after the change to how NAT is implemented. What I am trying to accomplish logically seems fairly simple, yet I cannot get it to work. I have a Synology NAS at home that I am trying to reach via the internet. Prior to using my ASA, I had Verizon's FIOS router as my gateway and everything forwarded with no issues. The ports I need forwarded or reachable via the internet are TCP port 80 and 5000.I can also configure it via command line if that's the easier/preferred method.
View 11 Replies
View Related
Oct 14, 2012
I've done a lot of ACE work over the years but this is the first time this has ever come up.
I have a request from an application group where I have 3 rserver in the server farm but they want all traffic to only go to the first server unless that server fails. If the first server fails, only then do they want traffic to go to the 2nd server instead and if that fails, then traffic goes to the 3rd.
I've read through the documentation but haven't figured out a way to do this. What to do this type of failover configuration?
View 4 Replies
View Related
Feb 27, 2013
I've downloaded Prime Infrastructure 1.2 eval and wanted to see what it looked from WCS that I am currently using to manage the wireless network and I added the WLC (4404) device but it list the device as "Managed with Warning" and I can't find what the warning is.
View 3 Replies
View Related
Nov 11, 2012
We have an SLM248G switch which seems to be giving a few problems. When attempting to access the switch, the admin page loads but after logging-in, the admin portal page does not load fully, see screenshot.
Even after a factory reset (reset button held), the issue continues. Is there any other workaround for completely resetting everything?
View 2 Replies
View Related
May 1, 2012
I have 2x WLC 5508 running version 7.2. 1st one is setup and running. My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?
View 4 Replies
View Related
Aug 23, 2012
I need to confirm that the 4510R+E switch with the SUB7-E/2 running version 15 IOS will not support NAT. I am 99% convinced that it does not but i am looking for confirmation, as i am a bit surprised by the lack of NAT support on this platform.
View 0 Replies
View Related
Jun 3, 2012
I have several older 2950's running on my network. This one in particular became of interest to me because I couldn't set up SSH on it or enable any QoS features on it, so I did some research. What I found was there are basically 2 versions of the IOS, c2950-i6q4l2 or c2950-i6k2l2q4. I also read that the c2950-i6q4l2 IOS versions (like the one in the switch I am referring to) have both the SI and EI feature sets integrated, but the one that gets enabled is entirely dependent upon the switch model you are running it on. Did I understand this correctly? Does the IOS check the hardware on the switch and then decide with feature set to use? If so, what is prohibiting the EI feature set from being enabled on this switch? Is there a way to force the EI feature set to be enabled since it is integrated in this image?
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA12, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 07-Jul-08 23:39 by amvarma
Image text-base: 0x80010000, data-base: 0x80570000
[code]....
View 8 Replies
View Related
