Cisco :: DCRServer Fails To Load Properly On LMS 4.0.1
Feb 17, 2013
We are running an instance of LMS4.0.1 on a Windows 2008 Server installation that is managing circa 2k devices. A couple of weeks ago we run into disk usage problems as a result of log files not being rotated properly - this issue has been fully resolved.
Since then, we have been unable to restart our DCRServer and this is becoming a real issue for us.
The output of a pshow DCRServer is below ...
C:Usersmodonovan>pdshow DCRServer
Process= DCRServer
State = Waiting to initialize.
[Code].....
Continuously the State will be "Waiting to initialize". Several restarts of the daemon and the server itself have made no difference.
View 1 Replies
ADVERTISEMENT
Feb 28, 2011
I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.
View 2 Replies
View Related
Feb 7, 2011
I've purchased a Linksys RV042 hoping I could connect my two ISP.Both of them are 1/1 Mb, first is DSL second PPPoE connection.The problem is that on system summary page it doesn't show me that second WAN is connected. Even when I trying to manually connect to Internet it doesn't work.
When this connection is in Load balance Mode, internet is very slow, sometimes it's even disconnected.
My question is:How to configure Load Balance properly?I've tried this page:
[URL]...
View 13 Replies
View Related
Jun 19, 2012
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Plug and Play ID.When I test it says the adapter is working properly. I don't know if this matters but I am unable to get microsoft updates. I have 16 that continue trying to update but my computer will not allow.
View 8 Replies
View Related
Oct 30, 2012
My internet at times fails to work. I will be browsing and webpages will fail to load until I wait 30sec or so and refresh the page a few times. This happens every 3ish minutes. However, I am still connected to wi-fi according to my computer and there is still internet access (at least it says). I can also disconnect from wi-fi and reconnect and the problem goes away momentarily.
I know this happens on Chrome and IE, so it is not the browser. And, the internet is just find on other computers at my house so I do not believe it is the router.
View 6 Replies
View Related
Oct 14, 2012
I've done a lot of ACE work over the years but this is the first time this has ever come up.
I have a request from an application group where I have 3 rserver in the server farm but they want all traffic to only go to the first server unless that server fails. If the first server fails, only then do they want traffic to go to the 2nd server instead and if that fails, then traffic goes to the 3rd.
I've read through the documentation but haven't figured out a way to do this. What to do this type of failover configuration?
View 4 Replies
View Related
Nov 11, 2012
We have an SLM248G switch which seems to be giving a few problems. When attempting to access the switch, the admin page loads but after logging-in, the admin portal page does not load fully, see screenshot.
Even after a factory reset (reset button held), the issue continues. Is there any other workaround for completely resetting everything?
View 2 Replies
View Related
Jun 24, 2012
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies
View Related
Jan 25, 2013
I have been struggling with setting up a WDS wireless network using 5 AP's for my office.im using Dlink DAP1353 AP's and they support WDS but its a mission. The LAN infrastructure is there already but do i connect all devices to the LAN or just one?Do i use the DHCP server or do i let one access point handle that? i keep getting signal conflicts and a lot of don time.
View 7 Replies
View Related
Jun 3, 2012
Im having a problem with my wireless. My whole family is connented. to wireless. But when we all use it together it goes so slow. Like 4 some times only 2 people using it at the same time.
View 9 Replies
View Related
Jan 11, 2011
I have an problem with VPN connection on notebooks. Sometimes the VPN connection works perfectly, and other times it just doesn't work at all.The Cisco VPN client software is version 5.0.04.0300. Operating system is Windows XP Prof SP2.When the connection fails, the client statistics window shows "Bytes Received: 0".Rebooting the system, has no effect
View 1 Replies
View Related
Dec 16, 2010
I am using a cisco 2811 router.It is not booting properly.It reboots continously by just decompressing the image repeatedly..
View 2 Replies
View Related
Nov 30, 2011
I have a an issue with one particular VPN user. They are using the built in Windows Vista client to connect to my ASA 5510.
All other users do not have an issue and i receive the following error at roughly the same time of day when the drop happens. Authentication is done by my AD Server which handles all logins.
[code]...
View 2 Replies
View Related
Feb 27, 2012
I not familiar with the ASA 5510 product. I having trouble since last 24 hours and still cant find out the root cause yet. Here is my scenario, my network should be
WAN --- ASA5510 (FW) --- SERVER (192.168.1.0/24)
Now I face the problem, all the NAT static 1-to-1 is working OK. All my public IP can be ping from outside internet. But the problem happen when I try to telnet to port 80 on each server. I had try telnet from my PC to public IP 124.xxx.179 80, it's work fine, but failed on 124.xxx.180 80, then on 124.xxx.181 80, its work fine.
Then I do try on my colleague PC, in same network as mine, I face another case where the public IP 124.xxx.179 80 cannot be telnet, but it's ok for 124.xxx.180, then failed on 124.xxx.181 80.
FYI.. all our PC can ping to the Public IP and no packet lose.
The scenario is very weird, I cant find any other solution as had review my configuration few times.
check does my configuration is working perfectly or not.
ASA Version 8.2(5)
!
hostname fw-asa
enable password xxx encrypted
[Code].....
View 8 Replies
View Related
Sep 27, 2012
I have one Flex WLC 7510 using software version 7.0.220, And all APs are 1131.
I have some sites with H-Reap, where H-Reap is configured properly.
The Access Points are set with AP Group. AP Group is configured properly too.
Each AP Group was configured for one site, and they was configured with 2 SSIDs. All sites has 2 differents SSIDs. During some basic tests, in one site with 9 APs, I saw:
1. When the Access Points are registred on WLC, all APs are working fine. All APs has your 2 SSID added on slot 0 (radio 0)
2. If I disable the link between WLC and Access Points, 7 access points delete SSIDs on your AP Groups and replace it with 16 SSIDs (SSIDs on Default Group) configured on WLC.
View 5 Replies
View Related
Mar 25, 2012
i had an extra network under my wireless networks that was just called "network" which was not connected to anything, but since i had this, on the bottom right of my screen where it normally showed the bars for the wireless connection, it had the bars grey with a red X on them, but my connection worked fine still.I am using windows 7 64x bit. I always use a wireless connection on my laptop.
View 6 Replies
View Related
Nov 11, 2012
I have a Dell Windows 7 Ultimate (32-bit) laptop that I've had for maybe half a month. When I first got it, I had no problems connecting to my router. But starting a couple days ago, the WiFi would not connect properly. I have to use the troubleshoot feature a couple times on my computer for it to work. My other laptops and other devices have no problems connecting to my network.
Here is the ipconfig for when it does work: Quote:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJustin>ipconfig
Windows IP Configuration
[code]...
View 13 Replies
View Related
Apr 7, 2011
I have 2 computers, One running Vista 32, Desktop.Another, Laptop, Win 7 64bit.Both computers have given Error 651 when using PPPoE wired connections, usually at the peak of the day.My ISP says that Error 651 is the problem, while I am starting to think its the amount of bandwidth their giving my neighborhood/home.Also, can that dosen't work,how to fix the overall problem of my Internet shutting off at peak hours?
View 2 Replies
View Related
Mar 11, 2012
when I couldnt turn on the wifi from the switch. It remained orange(which is its off state) and so I went to the device manager and the wifi adapter was shown there but with an exclamation mark. Showing the error "the device cannot be started(code 10)". So I uninstalled and rebooted, only to get the same error when it got reinstalled.
View 19 Replies
View Related
Feb 26, 2013
For awhile now I've been having an issue with my laptop connecting to the Internet. What happens is that when I power up my laptop and login, it doesn't connect to the Internet immediately. I have it set to automatically connect to the Internet. My wireless connection does appear when I click on the lower right icon that shows the wireless connection list of wireless networks near you.The only way that it will connect properly to the Internet is when I unplug my wireless router for 15 to 30 seconds and then plug the power back in to go through the process. Once I check the wireless icon, it finally does connect to the Internet. I hate having to keep on doing this because usually I have to go down steps in order to get to the router. Yet, when I connect to the Internet with my other laptop, it connects immediately to the Internet without having to do anything with the router. It puzzles me to why this is happening.
View 2 Replies
View Related
Dec 10, 2012
Wi-Fi won't connect properly (different laptop).I posted a thread similar to this recently (url...) Unfortunately, I have another laptop that has the same problem. Here is some information:
[code]....
View 5 Replies
View Related
Jan 15, 2013
here's the network.
Panasonic TV (DLNA Device) - Ethernet
WDTV Live Plus (DLNA Device) - WLAN
Windows 8 PC - Ethernet
Windows 7 PC - WLAN
Samsung Galaxy S3 - WLAN
The WDTV can act as a media player for both the Windows 7 PC and Samsung Galaxy S3.The TV can act as a media player for the Windows 8 PC.If I connect the Windows 7 PC via Ethernet, then the TV sees it and can act as a media player for it and the WDTV no longer can.The TV can't act as a media player for the Samsung Galaxy S3 nor can they see each other to use the Galaxy S3 as a wireless remote (Viera remote android app) .Why can my wireless devices talk to each other and my wired devices talk to each other, but the wireless devices can't talk to the wired devices?
View 1 Replies
View Related
Jun 28, 2012
I can log in my facebook account, check notifications, but that's it. Images won't load, the page won't render properly, can't check messages or use games or apps. Another thing worth nothing is that the page loads extremely slowly. Most other websites work normally. This has been going on for 3 days now.
I've done lots of troubleshooting already. I normally use Google Chrome so I tried IE and Mozilla but the page looks the same. The default font (Times New Roman) and white background are the symptoms of something (what?). I've only got a wireless connection and I'm suspecting there could be a problem there because my wife has the same problem on her laptop. We share the wifi connection.We've tried a lot of things: clear browsing data (cache, cookies, etc.) flush dns, restart computers, browsers, update anti-virus software, but no success, so far.
This looks normal:
C:>ping facebook.com
Pinging facebook.com [69.171.224.37] with 32 bytes of data:
Reply from 69.171.224.37: bytes=32 time=317ms TTL=230
Reply from 69.171.224.37: bytes=32 time=314ms TTL=230[code]....
So something must've happened around 3 days ago when everything still worked fine. One thing I haven't investigated is this wifi device: Huawei E585. I have no idea how to do any troubleshooting with it. one more thing I tried: proxy servers. I thought our ISP might have changed something somewhere (although all our friends have no problems) so I tried to log in through a few different proxy servers. The login page looked normal so I logged in. The page kept loading forever but it never showed any content. I didn't even get to see that Times New Roman font. But then again, it couldn't be an issue with my facebook account because I can use it normally on my cell phone. Well, as normally as you can use it on a cell phone.
View 8 Replies
View Related
Feb 19, 2011
I recently bought an asusg73jw xa1 from amazon and at first it worked just fine. But around a month later, when i started it up. It couldn't connect my home's wireless router or if it did, it would have no internet access. I'm pretty sure this problem isn't with my router because all the other laptops in my house can connect perfectly to my router at the same time. After around a week and i tried to connect again, the wireless started working again like nothing ever happened. This only lasted for around 3 days until my laptop once again could not connect to my router. Now the only way i can use the internet is if i connect my laptop to my router with a wire.
View 3 Replies
View Related
Mar 18, 2013
My desktop pc often can't connect properly with our router. Sometimes it works fine but most of the time I get a really poor connection or it will say connected but no network access. Every other device has no issues whatsoever, I can even sit with my laptop behind my pc and have a decent connection. This is what my CMD gave: [code] I even disabled all AVG functions and shut down any security measure of the router to see if would be more stable but to no avail.
View 10 Replies
View Related
Dec 1, 2012
I'm a new user of VOIP. My network connect is Cable modem -> router (Dir 615) -> ATA (SPA122) . Outbound calls have no problem. But inbound calls sometimes work, sometimes not ( got message: not in service)
View 1 Replies
View Related
May 22, 2012
The electric went off in my house about an hour ago, causing my computer to turn off as a result. Ever since, the internet on my PC has been acting up.
My internet was working perfectly before the power cut both on my laptop (my mum was using it at the time) and PC, however, while I've got no problems with the internet on the laptop, my PC keeps losing the connection to a ridiculous degree. It'll drop the connection for over a minute at a time, come back on literally long enough for me to refresh/load 1 webpage (~5 seconds), then go back off again for another minute or two.
All the lights on the router are on and I've even cross-referenced (lacking a better term...) the internet connection between my lap top and desk top and my laptop will work fine when my PC is telling me there's no connection and nothing will load on it. It seems to me that something has happened to my desktop when the power went out but I have no idea where to begin to even try to find out what's wrong.
I've tried turning off the router by both the wall and the little button on the back of it, and I've restarted my PC twice as well and still the internet doesn't work properly. My laptop picked up the connection as soon as the router came back on with no problem but my desktop struggled to find the connection and only picked it up after turning the router off twice aand restarting the computer twice as well and as I said, when it finally did find the connection it just keeps dropping it.
View 3 Replies
View Related
Jan 12, 2011
I have a Netgear CVD31T modem delivered by my internet provider. I can't change any settings on the modem. My connection speed is 30 gb up and 5 GB down.Until now I used a Linksys WRT54GV ver. 2 router to share my connection between my computers and NAS server and it worked ok. In speed tests I normally get approx 25 - 28 GB speed. To optain more speed on my LAN I want to buy a GB router. And here started my problems. First I tried a D-link DIR655, then a Netgear WNDR3700 and latest a Linksys E3000. I all 3 occations my WAN speed droped drasticaly down to between 3 - 5 GB speed, at under a ping test I have a loss of between 10 - 30 % and time on approx 50 ms.If I connect my PC directly to the modem or re-connect my old router it works perfect. I have tried to replace cables etc. etc.
View 5 Replies
View Related
Jun 2, 2011
Last night on the xbox 360 i was suddenly experiencing alot of lag on other peoples voices. i took no notice of it and the next day i went on my laptop and alot of websites wouldn't load properly.i can go on google,obviously this and my hotmail(after having to wait a long time for the hotmail to load), but others such as ebay will not load. I cannot even access my router settings by typing in my ip address, instead i get a message saying the page cannot be found. also i was disconnected from xbox live with the internet to xbox live part not working. Obviously the first thing i done was turn the router off and back on but it hasn't made any difference.
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4055 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1804 Mb
Hard Drives: C: Total - 290204 MB, Free - 141170 MB; E: Total - 14999 MB, Free - 5644 MB;
Motherboard: Dell Inc., 0G848F, , .5MDJWJ1.CN7016697U05OT.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
View 3 Replies
View Related
Jan 29, 2012
I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.
View 3 Replies
View Related
Jul 7, 2011
how u would evaluate the effectiveness of the home entertainment (PC,console, Windo media centre
View 1 Replies
View Related
Feb 14, 2013
I got the DIR-835 today and have been spending hours trying to get it to work right. Everything works well except I cannot for the life of me get this router to let me stream youtube properly anymore.
View 1 Replies
View Related
Apr 26, 2011
My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
View 4 Replies
View Related
