Network Devices Not Communicating With Each-other Properly
Jan 15, 2013
here's the network.
Panasonic TV (DLNA Device) - Ethernet
WDTV Live Plus (DLNA Device) - WLAN
Windows 8 PC - Ethernet
Windows 7 PC - WLAN
Samsung Galaxy S3 - WLAN
The WDTV can act as a media player for both the Windows 7 PC and Samsung Galaxy S3.The TV can act as a media player for the Windows 8 PC.If I connect the Windows 7 PC via Ethernet, then the TV sees it and can act as a media player for it and the WDTV no longer can.The TV can't act as a media player for the Samsung Galaxy S3 nor can they see each other to use the Galaxy S3 as a wireless remote (Viera remote android app) .Why can my wireless devices talk to each other and my wired devices talk to each other, but the wireless devices can't talk to the wired devices?
View 1 Replies
ADVERTISEMENT
Jan 1, 2013
I've got several devices (two laptops, Xbox, WiiU, Apple TV, 2 ipads, and an iphone) that can connect to my home wifi network just fine. However, when connected it seems these devices cannot communicate with one another.
Homesharing between my iphone/laptop and Apple TV is no longer functioning. Also, I can not sync my windows media player with my Xbox, and I can not connect my iphone to the Xbox using AirMusic.
Here's my hardware: Motorola SB5101U SURFboard modem, Netgear Wireless N WNR2000 router.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[Code]......
View 3 Replies
View Related
Jan 30, 2012
We have a new site-to-site configuration comprised of two ASAs (a 5505 at the remote site and a 5510 locally). The site-to-site tunnel is up and appears to be working fine, with the exception of one thing; two identified IP addresses on the remote end cannot seem to communicate across the tunnel.
For example: address 192.168.3.81 is able to see resources at our facility, but 192.168.3.82 (an HP Laser jet P2055dn) cannot. However, 192.168.3.82 is ping able from the inside interface of the remote ASA and doesn't appear to be having any other connectivity issues. Also, the default gateway of this device appears to be set properly. When checking the real-time log viewer, I'm not seeing any error messages, it just appears as if the .82 device is not routing to the remote ASA, but strangely enough the local ASA's logs do seem to show communication with .82. (See the below logs.)
When we attempt to ping the 192.168.3.82 address from a local PC (10.10.10.10) that participates in the VPN tunnel, we see the following:
Local ASA
6|Jan 31 2012|16:03:53|302021|192.168.3.82|0|10.10.10.10|512|Teardown ICMP connection for faddr 192.168.3.82/0 gaddr 10.10.10.10/512 laddr 10.10.10.10/512
[ code]....
Remote ASA
6|Jan 31 2012|16:03:53|302021|10.10.10.10|512|192.168.3.82|0|Tear down ICMP connection for faddr 10.10.10.10/512 gaddr 192.168.3.82/0 laddr 192.168.3.82/0
[ code].....
We can successfully ping 192.168.3.81 from the same local workstation we see the following on the remote ASA :
6|Jan 31 2012|16:03:38|302021|10.10.10.10|512|192.168.3.81|0|Tear down ICMP connection for faddr 10.10.10.10/512 gaddr 192.168.3.81/0 laddr 192.168.3.81/0
[Code]....
We have no IP address overlapping and neither ASA's logs show any errors. Unfortunately, we don't have access to the remote site's router configurations, but we've been assured that the issue is not on their end.
View 3 Replies
View Related
Aug 16, 2012
I have an exisitng ASA5520 which is already working with remote clients using Cisco vpn client configured using ipsec over tcp, I am now trying to get vpn access for Iphones working and having a problem where once connected the Iphone cannot ping any internal device. The configuration on the Iphone does not allow for Ipsec over tcp and therefore uses udp 500 by default, if i create a new profile from a pc and do not use ipsec over tcp it has the same issue where it establishes a vpn tunnel but cannot ping any internal device as soon as I change the profile to ipsec over tcp it works fine.
View 2 Replies
View Related
Aug 25, 2012
I have a dell optiplex gx270 desktop that can't detect netgear router. I am connected through a wire cable and have the driver for intel pro/1000mt network adaptor. It shows on the right bottom corner that I have the internet connection but I don't have IP address. I tried restarting computer and router to no avail. I have other computers at home to download drivers. So I visited dell and intel to diagnose and dowload driver for the Intel Ethernet adapter but still can't get no internet connection.
View 3 Replies
View Related
Jan 25, 2013
I have been struggling with setting up a WDS wireless network using 5 AP's for my office.im using Dlink DAP1353 AP's and they support WDS but its a mission. The LAN infrastructure is there already but do i connect all devices to the LAN or just one?Do i use the DHCP server or do i let one access point handle that? i keep getting signal conflicts and a lot of don time.
View 7 Replies
View Related
Mar 25, 2012
i had an extra network under my wireless networks that was just called "network" which was not connected to anything, but since i had this, on the bottom right of my screen where it normally showed the bars for the wireless connection, it had the bars grey with a red X on them, but my connection worked fine still.I am using windows 7 64x bit. I always use a wireless connection on my laptop.
View 6 Replies
View Related
Aug 10, 2012
I have an acer aspire 5552 laptop that wont connect to the internet. When I tried troubleshooting I get the message "network cable not properly plugged in or may be broken". When I go through the control panel/system devices/network adapter the only thing that shows is pdanet. Right now the only way I can connect is through my cell phone using pdanet. How can I get my network adapters to show back up?
View 1 Replies
View Related
Mar 29, 2013
I have a bit of an unusual networking situation here in my home and need proper configuration, so I stop losing my web connection on a daily basis.The reason I'm forced to have the 2nd router is that my wife telecommutes and the 1st (primary router) is provided by her company. For whatever reasons, her company will not allow the wireless radio in their router to be turned ON - which forces me to add the 2nd wireless router for our 3 computers that require wireless access.
1 - Since the primary router has DHCP enabled, I am assuming that I should Disable DHCP on my wireless router. Am I correct?
2 - What other settings on the wireless router do I need to pay particular attention to in this situation?
View 4 Replies
View Related
Nov 12, 2011
months ago, i installed a USB card so that my dvd burner could run at 2.0 or 3.0. it has worked fine. every now and then the card becomes unlodged from inside the computer, and i have to push it back into the slot.Tonight, while the computer was on, i was putting it back in, and it popped all the way out, my computer shut down and when i restarted it, i got the error message "windows did not find properly installed network adapter/ if you have network adapter update/re-install drivers"Only problem i have is when i go to device manager, i see NO network adapter?
View 8 Replies
View Related
Oct 17, 2012
I work in a facility where not everyone communicates very well. Everyone seems to have there own method of labeling ethernet cables. We have several hubs (actually it is a cage with a patch panel and a cabinet with several switches containing over 200 ports) in this facility. The roof is supported by columns and the columns are number 1-35 from south to north and A-W from east to west. So the hubs are easily idientiyable by the column number that they are close to, but this is where the standard ends. Some people use the patch panel and port of the patch panel, some people use the server stack number and the port. What is the proper way to label these. Linking a website demonstrating this standard s I can print it off and share with others would be great.
View 1 Replies
View Related
Oct 2, 2011
I purchased a new built system, worked great 5 days, major trojan forced a reformat of drive. Now Win 7 64 Device Manager is empty- no network adapter found - I get the notice that "there are no properly installed network adapters". I use the on-board network adapter on the mobo, no plug in network card, hard wired to DSL -- like I said, it worked fine for a few days now it's GONE after reformat.
View 10 Replies
View Related
Nov 11, 2012
My laptop keeps saying "Windows did not detect a properly installed network adapter.If you have a network adapter, you will need to re-insatll the driver". I've found the right one and it still want install. Says it's the wrong one but i'm pretty sure it's the right one. I just did a fresh install where i put windows 7 extreme on a laptop and i can't seem to ge the right drivers i guess. I don't know if it's the wrong driver or a bad NIC Card.
View 1 Replies
View Related
Dec 27, 2011
I have an inspiron N 5010 laptop. It didn't have any software with it, just a DOS operating system. So I downloaded all its drivers here on website.Some of its Network drivers did not work properly though.
Now I purchased a wireless modem and everybody can find its network on their utilities, but me!
So I guess it's a software problem. How I can download a proper working software for my laptop, because I checked my system information and there is no adapter in its network part.
View 6 Replies
View Related
Jan 7, 2011
I have using Canon iR2318L Printer & we are Work on VLAN but my printer is not working properly in Vlan is this VLAN Problem or Printer Problem ?
View 4 Replies
View Related
Feb 28, 2011
I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.
View 2 Replies
View Related
Oct 22, 2011
what is the practical result ? Can it be fixed ?
View 1 Replies
View Related
Apr 22, 2013
Writing my first router config from scratch for an 1801. I have wireless devices able to connect & authenticate with WPA. Wired devices can talk with wireless devices & on both interfaces devices obtain a DHCP lease. I can ping web based resources from the FA0 interface; the problem is, LAN devices can't ping has FA0. I'm pretty sure (well a hunch) that this is going to be down to NAT
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router0
.[code]...
View 10 Replies
View Related
Nov 26, 2012
I am tryng to install a printer wireless and my computer isn't communicating with the printer, although its connected to the router.
View 1 Replies
View Related
Feb 21, 2013
I am using windows 7 OS(32-bit) and it is creating automatically the sessions and communicating with different static ip's.I have find out by using netsat -n command
TCP 192.168.3.22:50746 210.210.113.83:80 SYN_SENT
TCP 192.168.3.22:50747 210.210.113.81:80 SYN_SENT
View 3 Replies
View Related
Apr 27, 2011
My wireless router stopped working. When I plug directly into the modem the internet works finely.
View 2 Replies
View Related
Dec 1, 2011
We have cisco 3550 switch i have configure 3 vlans in this switch. i have enable routing between this vlans but vlans not able to communicating with each other.
View 2 Replies
View Related
May 8, 2012
I have the following equipments & specifications
1 Mac OS
1 Windows XP
1 Linksys Cisco WRT600N router
My Mac OS will be on a local subnet (example 192.168.1.0/24), and my Windows XP will be on another local subnet (example 192.168.2.0/24).
How am I supposed to configure my router in order for both of my 2 subnets (Mac OS & Windows XP) to "talk" to each other ?
On another note, I would also like my MAC OS IP address to be dynamically assigned from the router (DHCP server for this subnet), while my Windows XP IP address can be statically assigned.
View 1 Replies
View Related
Oct 29, 2012
have the following set up: cable modem>wifirouter>gigabit ethernet switch>to 16 ports throughout house. When I connect a second wifi router to any port around the house, the internet does not work when connecting to that specific router, however, if I use a lan cable and connect direct with my mac or cpu, internet works fine. wifi routers are not communicating with LAN ports
View 9 Replies
View Related
Aug 27, 2012
I lost internet from the ISP and parts of our LAN went down.We were able to reproduce the error.Problem: Internet from ISP drops, program using port 10541 within the LAN stops communicating with a server.The computer and server are on the same switch, neither require access to the internet.How we fixed the problem, temporarily: Unplugged the power from the cable modem.How we reproduced the problem: Unscrewed the cable drop to the modem and powered it on.I have checked our firewalls logs and have seen nothing that stands out. I was able to ping the server from multiple computers, including the one that had the program running on it.Also while the internet was down, I tried removing the DNSs from the computer running the program, this made no difference.
View 1 Replies
View Related
Dec 16, 2012
Had to change my wireless box and now my wireless Dell V505 cannot communicate with the new box. Unable to print.
View 1 Replies
View Related
Mar 28, 2013
I recently got new internet service and now my wireless printer and laptop are not communicating. I think I need the wire to plug into the laptop + printer, but I lost it.
Printer: Dell V715W
View 1 Replies
View Related
Apr 19, 2011
I have a cisco 2811 with security bundle with IOS 12.4(13r)T I am planing to use this router as a VPN gateway for company ( i.e)
1. LAN 2 LAN VPN ( Supporting if remote site is having dynamic IP)
2. Remote access VPN for VPN client
I have configured the router ( attached is the configuration) I have not tried to use the LAN to LAN VPN ( first i complete remote access VPN and then check L2L) I tried to use the remote access VPN I am able to connect from vpn client software and got the IP address but unable to ping the servers in LAN.
View 13 Replies
View Related
Jul 21, 2012
We ran a D-Link DIR-655 for about 5 years on our home network of 7 desktop computers (LAN) and two laptops (wireless) with essentially no problems. However following a power outage last week the router stopped communicating with the cable modem (WAN port failure?). From the web site we determined that the DIR-825 is a fancier version of the DIR-655 (extra 5 GHz transmitter) so we upgraded to a new 825 three days ago. I did not use the wizard on the CD to set up the new router -- rather did it manually because I thought I'd configure the new router exactly the same as the old one -- this was probably not a good idea in retrospect. (FYI our new DIR-825 is a ver. B1 unit with ver. 2.02NA firmware.
After setting the router up -- it lit up like a Christmas tree and I could see all 7 desk top computers (3 are WIN7 & 4 are WINXP) in the LAN and all would go on-line with no issues. (FYI 3 desk tops are directly attached to the DIR-825 and four attached via a switch). However, when I tried to map the network I find that only 5 of the desk tops we assigned to our named home network -- 2 or them could not be mapped as they were assigned to a "public" network. So while they all still communicate with each other two are no longer in our home network. I do not think this was anything that I did -- knowingly at least.
I logged back on the the router home page but I see nothing that clues me in as to what I did wrong.So I'm wondering how the DIR-825 made these "assignments" and what I can do to redirect the router to bring the other two computers into our home network. (BTW one of the two "miss-assigned" computers is WIN7 and one is WINXP so its not a window version issue).
View 2 Replies
View Related
Jun 27, 2012
I enabled dual stack on my rv042g router but its not recieving ipv6 information from my isp. My isp is Time Warner in Milwaukee. They assure me that they are ipv6 ready and assume the problem is on my end. All they want to do is have me connect one computer up to my modem. What good is that when I have a network that needs service. The router needs to be working not just one pc. My ipv4 is working perfectly. It is obtaining all information automaticly.
View 3 Replies
View Related
Jul 3, 2011
We have NAM-2 installed in 6500 chasis. Some times in GUI It does not analyse the traffic and shows the error msg"error communicating with RMon daemon". But at the same time we can login to NAM through CLI,
The issue resolves by reseting the module by hw-module switch "" module "" reset but not always and happens not very often,
Device details:
NAM application image version: 4.0(1a)
Maintenance image version: 2.1(5)
NAM Daughter Card Micro code version: 1.34.1.28 (NAM)
[Code].....
View 3 Replies
View Related
Aug 20, 2012
I have a client that I recently replaced their GSS's for and last evening I cut them over to an HA pair of ACE 4700's. After about an hour, it looks like the GSS and ACE stopped communicating with each other. When this happened, they switched back over to the old CSS appliances and everything came back up fine. Apparently this happened the last time they tried to cutover to the ACE and they contacted TAC. TAC told them the issue happened because the GSS's they were running at the time were EOL. So now, with brand new GSS's, they are experiencing the same issue.
As of now, the ACE's are offline and I cannot get into them to see what the issue may be. We tested the sites out last night after the cutover and everything seemed fine. There was one minor problem that I resolved quickly, but that was it and then we left. The client started getting emails about an hour later about their main website being down. They do have the ACE logging to a syslog server, so we will look at that to see if there is anything relavent. I suggested that we bring up a test site to use through the GSS/ACE and see what happens. They have another CSS that they can run their sites through, so this option will work without taking down all of their other sites.
View 1 Replies
View Related
Nov 18, 2011
I have a Cisco network on a ship where I work, I have an Ericsson GSM Access point which picks up local GSM 3G signal and broadcasts it onboard. I have two of these units and they are connected to a D-Link Load balancing router which is in turn connected to a Cisco 3560 Series 8 poe switch. Each unit is on a different subnet. The Cisco is on the DHCP server from my AD server (Windows 2003 Server) The Load balancing router has no DHCP and the Ericsson units have their own DHCP servers.On the Cisco switch if I plug in with a laptop I get an IP address for the DHCP on my server. I cannot ping the load balancing router from it. If I connect to the Load balancing router and set a static address for that subnet I can access the internet via the Ericsson units. And if I connect to the Ericsson I can access the Internet.
View 22 Replies
View Related
