Cisco VPN :: 5500 - Java Version 6 / Update ASA Firmware?
May 16, 2013
ASDM access to 5500 using Java was just a frustrating experience. If you manage only one device you may not notice the pain. But if you are managing multiple devices with some device 'forbidden' to update ASA firmware,
I spend few days looking at the issue and came to a conclusion and decided to post to guide all newer VPN admins who will go through the same pain and hopefully we can reduce some combined wasted time.
Recommended Beginning Setup for New Admin :
[code]...
View 2 Replies
ADVERTISEMENT
Jan 12, 2012
I just recently updated my firmware on my linksys router WRT54G with the new version of linksys firm ware and now my router does not work. I can not access the GUI under the ip address 192.168.1.1. I 've tried to reboot the router using the 30/30 method that is suggested by Linksys, but I still can not access the routers GUI.
View 2 Replies
View Related
Jul 16, 2007
Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies
View Related
Nov 8, 2007
I am needing to update the firmware for my router. befw1154 version 4. I went to the download section of the linksys website, and it does show that there is an update there, but I have read in alot of places that the update downloads are in a zip file. WEll it definately wasnt in a zip file, and all it did was download a strange file and there was nothing to install or anything. My router is still on the blitz, and going down every few minutes and I am having to restart just to have it go down again. firmware update for this router?
View 1 Replies
View Related
Jun 10, 2013
MY belkin router model no :F5D7234-4v1, recognizes only my laptop and my other devices such as mobile and tab are getting the signal and w-fi gets connected but the internet is not working. when contacted service provider he asked to upgrade the firmware. Is there any recent version firmware upgrade of the model. current version is F5D7234-4_UK_1.00.01.
View 1 Replies
View Related
Jun 9, 2013
what is the recent version Firmware update for Belking router model number : F5D7234-4v2
View 1 Replies
View Related
Feb 23, 2013
When i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies
View Related
Feb 2, 2013
How do I update the firmware on my N wireless router with version 2000? It says there is an update, but I can't update it with the one firmware update that's available for download.
View 4 Replies
View Related
Aug 11, 2012
I have a EMEA wireless router WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't seem to find an update for the firmware on the site.
View 2 Replies
View Related
Apr 4, 2011
I got problem with RVL200, he works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stop working after last java update. The machine witch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with lunching the Java applet ,all the rest is working.- I'm login to SSL VPN Tunnel- The new window is opening I accept applet to run.He try but nothing happends the window is bank with no connect / disconnect buttons. [code] I have all the rights / permission to vpclient catalogue and files in there.I try this on root to the same error
View 12 Replies
View Related
Oct 16, 2012
So (foolishly) I let the software updater delete Java 6 (which only Apple provides), and I installed Java 7 from java.com. Was running ASDM 6.4.9, all I got was the Java 7 splash box. Updated ASDM to 6.4.9-103, same problem.
I can run ASDM in one of my VM's, but it's a pain.
View 1 Replies
View Related
Aug 22, 2012
yesterday I tried to connect to our ASA 5520 using ASDM Launcher, which has alwasy worked before. For some reason ASDM Launcher is no longer working from both my Win XP desktop and Win XP laptop. I can open ASDM through the browser but not the launcher. Both desktop and laptop have Java 7 U 6. I'm not sure if I can back rev my Java.
View 4 Replies
View Related
Jun 24, 2012
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies
View Related
Feb 13, 2013
I'm using two 5500 WLCs with the version 7.2.110.0 When some AP with the part number AIR-CAP1552E-N-K9 associate with them, the 802.11g stays up and the 802.11a stays down.I saw the AP interfaces in Wireless --> All APs and the 802.11a is down and the regulatory domain show me not supported but the 802.11g is working normally.I follow this document from Cisco [URL] and i just have BR - Brazil to support this part number.
View 5 Replies
View Related
Oct 25, 2011
ive updated my catalyst 4948-10GE to version 15.0(2)SG1.Now it is not possible to login by ssh or telnet on this switch. the access is established over the mgmt-Interface and vrf.i get a ping reply but login is no more possible now.is there an new feature in this version for vrf or remotelogin that has to be configured? if neccessary i can paste the running-config here.
View 3 Replies
View Related
Oct 19, 2011
I am needing to udate the firmware that I currently have on a 2811 router it currently has c2800nm-adventerprisek9-mz.123-14.T6.bin. I ahve looked through the download area on Cisco's page but the only thing I could find required 128MB flash and this device only has 64MB.
View 2 Replies
View Related
May 21, 2012
I have a P-660HW-T1 v3 its using V3.70(BYD.1) | 02/11/2010.when I try to update it to 3.70(BJZ.10)C0 the update fails to succeed.
View 1 Replies
View Related
Oct 1, 2012
I have REV A and the firmwars version is 1.04. I want to upgrade to ver 1.35. I have downloaded the firmware to my computer. When I login to the router page and go to the firmware tab, when I try to click browse for the file nothing happens. I have tried using Internet Explorer and Firefox.
View 2 Replies
View Related
Nov 12, 2011
I have a DIR-615 router, hardware rev. C1 running firmware v. 3.10, dated 4/17/09. I've been beating my head against the wall trying to get this router to properly forward ports for a bit torrent application, but it not only won't do that, it doesn't want to save DHCP reservations and it doesn't want to recognize my computer on the LAN if I set a static IP address (although it does allow my computer to connect and get an internet connection). From the D-Link website, the description of firmware update 3.12NA looks like it might take care of these problems, but I can't get the router to update. When I log into the router and check for updates, it returns a message saying the latest update is v. 3.11, dated 9/15/09. However, when I attempt to download the update, nothing happens. The D-Link website offers update 3.11NA (4/20/09), 3.12NA (3/8/10), and 3.13NA (9/30/10). Why does the website offer me a different update than the router itself? I downloaded 3.13NA and unzipped the folder, which has a text file and a .bin file; I presume the latter is the update. However, when I browse to this file and attempt to upload it to the router, nothing happens. How the heck do I update this router?
View 5 Replies
View Related
Jun 5, 2011
My roommates and I keep getting knocked off the internet every few minutes on the router so I've tried a bunch of the tricks found here and am trying to also update the firmware. I downloaded the newest firmware, uploaded it to the router and it says it succeeded in the update, but then after reboot gives the same version it came with.
View 1 Replies
View Related
Oct 9, 2012
I am using Packet Tracer to simulate Cisco networking.As the existing IOS of the 3560 and 2960 switch are in older version which has no new feature in new IOS, how to upgarde the IOS of Cisco switch at Packet Tracer?
View 5 Replies
View Related
Oct 3, 2011
I've been looking and I can really find much info about this, I got a 1841 and 2801 router with ADSL WIC cards and both are synching really low compared to my cheap home router
This leads me to believe I need a firmware update so I got the adsl_alc_20190.bin and loaded it into flash and reloaded my router but its still saying my firmware is using an embedded one.
sh flash:-#- --length-- -----date/time------ path1 1000636 Oct 4 2011 05:59:54 +00:00 adsl_alc_20190.bin
sh dsl interface atm0/1/0ATM0/1/0Alcatel 20166/20174 chipset information ATU-R
[Code].....
View 3 Replies
View Related
May 6, 2013
I have tried to update the firmware of my srw2016 but after this update my switch wouldn't start again.
It shows this message in my console:
Exit from boot menu. Continue with flow.
Preparing to decompress...
Image in address: 0x0 - Check Sum error!
Please download a new image.
Downloading code using XMODEM.
View 1 Replies
View Related
Oct 4, 2009
I have this piece at my home and just realized today that there is a new firmware available on the cisco web page. It has made the device more stable, but the most noticeable improvement is in the UI. Previously it was a linksys for business UI that was pretty much exactly like the consumer products. After the upgrade it is now a Cisco small business UI. I think that this will make the resellers take the products more seriously as a small business piece rather than an upgraded residential product.
View 2 Replies
View Related
Mar 17, 2013
I just bought the SRP541, and it has the old firmware. I downloaded the new firmware, yet I cannot figure out how to install it.
View 3 Replies
View Related
Dec 20, 2010
I have a working WAP2000 that won't accept the 2.0.3.4 upgrade file. After selecting the file and pressing the UPDATE button, I receive the following error:
This webpage is not available.The webpage at URL might be temporarily down or it may have moved permanently to a new web address.
View 5 Replies
View Related
Nov 13, 2012
We need to update the firmware for a small business router WRVS4400N. Unfortunately, I can't even burn the ISO file to CD after downloading it as instructed. I get the following error message: "The selected disk image file Isn't valid." I'm using a Windows 7 Ultimate computer.
I downloaded the proper firmware update for my version V2.0.1.3 router several times, but each time I get the same message.
The main reason we purchased this router for our business for for the extra layer of protection with ProtectLink. It has been over two years now, and we still have not got our ProtectLink service installed because we are unable to install the service until the firmware is updated.
After doing some research online, we found-out that the ISO file needs to be padded to 2 Kb in order to be valid for burning. The ISO firmware file you provide for this update is not according to my calculations. We have no way of converting the file myself and don't know what to do about this situation.
We are extremely taken-back at the fact that I must submit my issue here on a forum rather than address the issue directly to Cisco Support. We are very disappointed with Cisco support as they appear to want to charge additional money just to get an initial shipped-problem remedied. You would think that the company that essential built the internet infrastructure would be more considerate to their customers. We will never purchase another Cisco product given this level of terrible support.
View 1 Replies
View Related
May 14, 2012
we are going to see a firmware update for the RV220W before it becomes obsolete?
View 36 Replies
View Related
Oct 18, 2011
Do Cisco recommend me running the latest firmware update? Im just an individual who uses it for like a small web-/FTP-/Mail-server, etc. What are the recommendations? Personally I would have updated to the latest...but what are actually the Cisco recommendations?
View 3 Replies
View Related
Mar 17, 2013
I just purchased a RV180W wireless router. It came with 1.0.0.30 firmware revision installed.
I have tried from multiple computers and multiple browsers to update the firmware on this unit, and I always end up with the same result.
"Firmware file is invalid or corrupted"
I have also downloaded the images (1.0.1.9 and 1.0.2.6) from multiple machines all with the same result.
View 2 Replies
View Related
Oct 2, 2012
We just purchased a new SRP 547W. When logged in with either the default admin or the cisco account there is nowhere to updare the firmware, but the manual says there is such a screen. The manual also mentions a "user list" under the "Administration" tab, but that is nowhere to be found either!
Model: SRP547W, ADSL2+ AnnexA, 802.11n FCC, 4FXS/1FXO Version ID: V02 Hardware Version: 3.1.0 Boot Version: 1.1.19 (Aug 24 2010 - 20:50:42) Firmware Version: 1.02.00 (023) Jan 6 2011 ADSL Firmware Version:0.60.0Recovery Firmware: 1.02.00 (023) Setup Wizard Version: 20101106.00
View 3 Replies
View Related
Apr 19, 2011
Here's what we have at the house;
1 - Motorola Modem (horrible ISP)
2 - Dlink DIR 655 wireless router (about 2-3 years old)
3 - 2 laptops (windows 7/both)
4 - DirecTV broadband box (can't remember how that hooked up to the router?)
5 - Playstation 3
6 - (3) DTV sat receivers
The problem started while trying to connect the PS3 to the existing network. Only one laptop is wifi, the other laptop and Ps3 are in my room and wired in to the router, and the strange little DirecTV box is in the wired mix(for on-demand i guess?) The PS3 could not log-in to the PSNetwork(still can't), but it could browse the web just fine. So I start manually typing in IP addresses, 6 IP's in all, including the sharing of 3 DTV boxes that show up on the network on my admin laptop. Didn't work, so I get into the DLink router URL and start opening up ports that PSNetwork uses. At this point I think I have it figured out, then I did a firmware update on the router. My laptop, the PS3(internet, no PSNetwork) and even the little DTV box was working fine, all wired in, using 3 of the four ports. The old lady's laptop in the living room not only couldn't get on-line, it couldn't detect a wifi network? So try to set up a new real quick before I left this AM.. No beans!! I looked at the specs for the router, the firmware is up to date but from early 2010, and the features say "NO" to gaming support..
Do I get another router that can handle all the devices and is PS3 friendly, if that's even a thing!? I can't roll back the firmware update cause I wasn't able to back up the settings, and honestly theres a good chance I did something really bad as far as trying to tweak that router to open up ports for the specific IP address that goes to the game console. We'll call it 191.55.55.99. When I thought I was finished, the PS3 IP address had switched to 191.55.55.98? So it dropped down a number, I thought it was static, and all my efforts were for the --99 IP address, basically I have network issues consisting of Satalite tv boxes, a public DTV share folder, a video game console, one wired and one wireless, and a router that I WANT TO SET ON FIRE!
View 12 Replies
View Related
Jan 14, 2013
I have been using the Asus RT-n53 for about a year now and had little to no problems with it. Lately, my wife's iPhone has been dropping its connection to the RT-n53. It was probably a problem with her piece of apple crap, but I thought I would update the firmware on the RT-n53. I found that my firmware was way out of date, so I updated to the latest version.
With the newest firmware installed, I can no longer detect the 5Ghz band with my PlayBook. Before the update, all of the other devices in the house were not 5Ghz capable, so my PlayBook was the only device that used the 5Ghz radio on the RT-n53. Now, the SSID for the 5Ghz band just isn't there any more. In the configuration settings for the RT-n53, everything points to "it should be working"... 5Ghz radio is enabled, SSID broadcast is enabled. I have tried changing the wireless mode from "N Only" to "Auto" to "Legacy". I have fiddled with channel settings, encryption settings, etc. Even tried changing the SSID a few times. Multiple reboot, and still, the 5Ghz SSID just doesn't appear on any devices.
View 3 Replies
View Related
