So (foolishly) I let the software updater delete Java 6 (which only Apple provides), and I installed Java 7 from java.com. Was running ASDM 6.4.9, all I got was the Java 7 splash box. Updated ASDM to 6.4.9-103, same problem.
I can run ASDM in one of my VM's, but it's a pain.
yesterday I tried to connect to our ASA 5520 using ASDM Launcher, which has alwasy worked before. For some reason ASDM Launcher is no longer working from both my Win XP desktop and Win XP laptop. I can open ASDM through the browser but not the launcher. Both desktop and laptop have Java 7 U 6. I'm not sure if I can back rev my Java.
View 4 Replies View RelatedMy macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies View RelatedI got problem with RVL200, he works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stop working after last java update. The machine witch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with lunching the Java applet ,all the rest is working.- I'm login to SSL VPN Tunnel- The new window is opening I accept applet to run.He try but nothing happends the window is bank with no connect / disconnect buttons. [code] I have all the rights / permission to vpclient catalogue and files in there.I try this on root to the same error
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies View RelatedASDM access to 5500 using Java was just a frustrating experience. If you manage only one device you may not notice the pain. But if you are managing multiple devices with some device 'forbidden' to update ASA firmware,
I spend few days looking at the issue and came to a conclusion and decided to post to guide all newer VPN admins who will go through the same pain and hopefully we can reduce some combined wasted time.
Recommended Beginning Setup for New Admin :
[code]...
I have an ASA 5505 VPN router w/ 10 license seats.I want to update the software image using ASDM. url...
View 4 Replies View Relatednat global entry not showing up in ASDM but it does via CLI see blow, it's a policy NAT.
nat (inside) 5 access-list inside_nat_outbound_4
global (outside) 5 ************-OUTSIDE netmask 255.0.0.0
Global 5 doesnt show in ASDM 6.1 (5) the globals only go up to 3
On CIsco ASA 5545x not able access finale application through SSL VPN, error shown is "class not found exception" and "bancs2000.bancs2000.class" default profile is used in VPN while we trying access HTTPS internal web server. Same behavior observed in version 8.6 and 9.1.
Above errors observed during JAVA loading process, browsers like Mozilla, Chrome and IE are tried.
My internet is typically just fine but when I try to use LAN it cuts in and out every few minutes, which as you can imagine ruins everything. Currently using wi-fi as my Ethernet port somehow has ceased working. No other computer wired or wireless in my house has this problem.
View 2 Replies View RelatedI have 3 routers all running OSPF. each of the three routers have 2 networks they are advertising..NAT Overload breaks OSPF Adjacency
[code]...
I am getting drops in MRTG graph. Pgm nhiPoller[Net]: Received large delta from 'hyd-rt3845-01-GigabitEthernet0/1'. Poll is dropped (OID in error is ifInOctets. Delta is 3989641522. Old value is 4239690170. Current value is 3934364396.).
[Code]...
What could be the reason for the polling drops and is it IOS bug.
I'm installing a new platform LMS 4.0.1 under VMWare and Windows 2008 R2.
I installed via Windows 2008 R2 Patch without problem in LMS 4.0, then updated in LMS 4.0.1.
I'm facing several issues during this installation.
The first issue I have is the following:
When I launched topology services, java jre file jre-6u22-windows-i586-p_withjacorb.exe was downloaded and I saved it on disk.
I clicked on file to install it and get the following message during the installation:
Error 1330.A file that is required cannot be installed because the cabinet file C:UserslmsAppDataLocalLowSunJavajre1.6.0_22Data1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt.
It tried to install certificate without success. I have internet access to java.com but it seems publisher is not trusted.
Recently, I've been having some problems trying to play a couple games coded in Java, such as MineCraft. Every time the game loads, my internet immediately disconnects.There isn't any error dialogue or message, it simply disconnects me.Sometimes, I am able to stay on my internet connection and play the game for a short while, but most of the time, it disconnects me. I am on a wireless connection, with a router running the custom DD-WRT firmware.
View 5 Replies View Relatedis there a java download for android
View 3 Replies View RelatedI have an ASA 5505 running 8.2
I used the ASDM wizard (6.3) to set up a remote VPN. After slightly adjusting the wizards configuration the VPN is working well.
Now I need to change the Outside interfaces IP address. When I do that the VPN no longer works. If I change it back to the original value the VPN works again.
What configuration changes do I have to make regaurding the remote VPN after changing the outside interfaces IP address?
I have upgrade the firmware on several RV082 (and RV042) model routers, and all of them have had subsequent WAN connectivity loss. The WAN works for a while, then stops working until the router is restarted, then fails shortly thereafter. I would assume it was some configuration corruption on incompatibility with the upgrade, but the symptom has been universal. EVERY 2.x upgrade I've made to a RV082 or RV042 router has exhibited this symptom. Reverting to the 1.3.98-tm firmware fixes the issue.
View 14 Replies View RelatedI using cisco 837 for incoming remote access VPN connections with are working very well but I recently created one outgoing easy vpn connection and I have issue since that time. As soon as easy VPN is up and established successfully I lost remote VPN access to internal subnet.
Where is :
Internal subnet: 192.168.172.0/24
remote VPN pool 192.168.24.2-6
Take a look at config attached and point me at missconfiguration
Just installed an ASA 5505 with AnyConnect Essentials. AnyConnect installation works fine on some windows boxes (All flavors) but have a couple machines with issues. This makes it clearly a computer side issue. When I try to log into the ASA to download the client with IE 9 the ASA just keeps asking for my logon credentials. If I I use Firefox my credentials work and I get as far as the "Using Sun java for installation" with instructions to click yes on the java security warning. The Java Security warning never arrives like on machines that don't have this problem. Firefox just hangs and has to be killed by task maanger. Remove and reinstall of both Java and Firefox fail to correct the problem. Any AnyConnect clientside recovery tips beyond Java and Browser reinstall?
A Google search show a few folks using Ubuntu and old PPC Macs seeing the same java error I get on these couple of windows boxen. [code]
its possible use citrix receiver for java on asa 5505 on ssl web vpn?
View 1 Replies View RelatedI have a Cisco 501 and I can not get into the configuration menu of the Java console appears to me this script
View 4 Replies View RelatedI'm trying to portforward for a game, and in order to do so, I'm setting up a static IP. I've portforwarded in the past and all's been fine, but when I'm trying to set a static IP now it allows me to portforward and host the game, but whenever I try to log into any sort of website, it cannot find the page. The only fix to this is to allow it to obtain the IP address automatically. I've had a static IP in the past and yet I've never run into this issue before.
When I go to my TCP/IPV4 settings under the properties of my selected internet connection, I open up my ipconfig(I'll post it below) and select "Use the Following Ip Address". I then input 192.168.1.73, to change it to that.
Then, I click on the subnet mask box and it auto-fills 255.255.255.0, which is listed under ipconfig anyways, and for default gateway I input 192.168.1.1. I leave the DNS server boxes blank because it doesn't list them under ipconfig and it's what I did in the past to achieve the same results. After I click OK, the issue I listed above begins.
Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Tim-PC
Primary Dns Suffix . . . . . . . :
[Code].....
Windows 7 32 bit laptop ----> Windows 7 64 bit PC with USB network adapter.
I'm trying to move a folder from one computer to the other. There are about 300 files totalling 3mb.
At around "234 files remaining", the transfer freezes, and after a minute or so, the network connection on the destination computer is shown as Disabled. If I right click and choose "Enable", it makes the attempt, says "connection failed", and then "It is not possible to connect at this time. No network was detected. You may need to plug in your network cable to complete the connection."
What will fix it is unplugging the USB network adapter and replugging. But it only allows a little bit more transfer before it happens again.
I tried initiating the transfer from one computer, and again from the destination (bringing the files to it), but the problem occurs just the same. On additional attempts it will reconnect to the other computer and allow me to browse the files, but the connection crashes again without any more progress. My internet connection is fine otherwise, doesn't do this unless I'm transferring data across the network. I disabled Eset real-time protection but have windows firewall up (I'd rather not turn it off).
I have 3 computers at my home, a WRT54G V1 router.
2 of the computers are connected wired to the router, the internet on them works fine. My other computer I have connected via wireless, and when I try to go on the internet every 3 seconds it is saying not available. Now one thing I noticed was that when I connected to the wireless network it renamed it to my computers service tag. I confirmed this via a friends laptop. From "Busted" to "DCLZMRH1_Network", defenetly not something I did.
When this wireless computer is connected, ALL computers on the network begin having the same problem where each 3 seconds everybody is disconnected randomly. However as soon as I turn the wireless computer off, everything goes back to normal on the wired computers.
I have successfuly replicated this issue using 2 different wireless adapters, one USB, and one "wired" the one you put on the inside (lol) I have Brighthouse Networks cable internet
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15
[Code].....
I want to create a site with which we can share a pics?
View 2 Replies View RelatedI just spent a number of hours getting a site-to-site VPN tunnel and Cisco Quick Connect client running on my WRVS4400N and RVS400. Turns out the problem was the routers don't route IPv6 properly and it takes precedence over IPv4
View 1 Replies View RelatedI have a RV120W that reboots itself when the WAN (ADSL modem) breaks away. With an old D-Link low end router, reconnecting after a failure is completed after 5 seconds and nobody cares, but the RV rebooting takes almost 2 minutes which is actually noticed...I also have some trouble getting VPN running, QuickVPN as well as normal IPsec, using either Shrewsoft or Greenbow as clients. get this router running with 3rd party VPN clients?
View 1 Replies View RelatedCurrently, I have a Cisco 4948 in office that connects to a remote site via BGP. From what I am seeing, when connecting a new device to this switchport (we connect devices to this switch for a multicast VLAN that is set up), the BGP link fails after roughly 20-30 seconds. The switchport is not tagged with a VLAN, or any other config. Just a plain old port. This outage continues until the port is added to the mutlicast VLAN.
View 1 Replies View RelatedACS5.2 time sync breaking once in near around one month and not able to authenticate after that .I am using domain controller (Windows Server 2008 R2) as NTP server for ACS .
What is the reason for it , is there any bug in 5.2 release or do i need to configure a thired device and point as NTP for ACS and domain controller.
We have a WEB VPN running on Cisco ASA 5510 (SW = 8.2.1 / ASDM SW = 6.2.1). There are multiple internal (Web) applications are published on it and are working. One of the Web Application is working from internal network but from outside (or internet) through Web VPN, it is getting stuck and trying to load JAVA version. It is to be mentioned here, the latter web application is required Java Version 1.4.2 while the working applications are working with Java 1.5.1.
Is it possible to mount the more than on Java version on Cisco ASDM to be worked together ?
I have just configured a ASA5505 running 8.2.2 as a webvpn server for clientless VPN connections.
I need to setup a particular bookmark for a RDP session which forces the use of the java client for those who can't seem to get the ActiveX control working for some reason or another (virus scanners/firewalls/scerutiy policies etc).
I created a bookmark as follows, but it always tries to connect with the ActiveX control first when logging on from an IE client.
rdp://192.168.1.1/?force_java=yes
I have cisco wlc 2125 and external web autherthation was configured on it. When user disable the java script in browser cisco wlc do not redirect on my external page instead of wlc show page http://1.1.1.1/login.html with cisco logo. How can i resolve this problem? How to configure wlc redirect to external web auth site with disabled java in users browser?
View 3 Replies View RelatedIm trying to configure a SR520 with the CCA, but every time I try and apply the changes to the router i get the following error.
"java.lang.nullPointerException"
Using CCA 3.0(1) and Java Version 1.6.0_16 from Sun Microsystems Inc?I assume this is an issue with Java, as like with the SDM you had to use an Old Vertion.