Cisco VPN :: Client 5.0.07.0290 Version Fails To Add Route
Feb 1, 2013
I am having this problem trying to connect to my university network trough the vpn client from a pc running Windows 7 Ultimate 64-bit: the client connects but I have no Internet access. I first believed that the problem was related to the fact that I had ZoneAlarm Free Antivirus+Firewall installed, but I made several steps, including the complete removal of the ZoneAlarm product, and I still have the same problem.
Here's what I see in the log:
Cisco Systems VPN Client Version 5.0.07.0290
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7601 Service Pack 1
[code]....
Using the same client (32 bit version) in another pc of my lan which runs Windows XP and that had never ZoneAlarm installed on it, I have no problems.Also, using Shrew Soft Vpn Client 2.1.7 on the problematic pc I can connect to vpn without problems, so I am really stuck trying to understand what's wrong with Cisco Vpn Client.
View 6 Replies
ADVERTISEMENT
Jun 17, 2011
I have a client that is getting disconnected quite frequently from our VPN Concentrator and in looking at the server I cna find no issues or cause for the disconnect. his ping to the concentrator never fails, but yet is disconnects. I have hundreds of remote VPN clients connecting to the same concentrator without issues.
[CODE]...
View 2 Replies
View Related
May 11, 2011
We do some remote work for our customers and often have to use their VPN in order to connect to their systems. We have had no problem utilizing the Cisco VPN with some of our customers unti recently. We picked up another customer that uses the Sonicwall VPN. If I sign onto the Sonicwall client, sign off, and sign into the Cisco VPN client, at the point that it makes the connection, it completely locks up my users' PCs. It happens to all of them.
I've discovered that from a fresh boot, I can get on and off the Cisco VPN all day, but as soon as I utilize the Sonicwall VPN, and then return to the Cisco VPN, it locks up every time.
All of my machines are Windows 7 and are using the Cisco VPN Client Version 5.0.07.0290.
View 2 Replies
View Related
Mar 26, 2013
I am running Windows XP SP3 and when I attempt to log into my work network I get CVPND/0xA340000D. The virtual adapter was not recognized by the operating system. I've done tons of googling without any clear direction was to what the problem might be. I've uninstalled and reinstalled twice.
=========================================================
66 19:23:45.171 09/08/10 Sev=Info/5 CVPND/0x63400013 Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.66 25 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 169.254.0.0 255.255.0.0 192.168.1.66 192.168.1.66 20 192.168.1.0 255.255.255.0 192.168.1.66 192.168.1.66 25 192.168.1.66 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.66 192.168.1.66 25 224.0.0.0 240.0.0.0 192.168.1.66 192.168.1.66 25255.255.255.255 [Code]....
View 5 Replies
View Related
Dec 6, 2012
I have a 3845 that will not let me ping to the internet from my PC.On interface g0/0 I have a connection to a internet connection (another router), using DHCP to get it's address (it gives g0/0 IP 192.168.0.3).On interface g0/1, I have a connection to my LAN (I assign the interface IP 10.10.1.1).
I can ping the router. The router can ping the internet, do DNS resolution, etc.I have ensured routing is enabled. The only route I have configured is a default static route: 0.0.0.0 0.0.0.0 192.168.0.1.Oddly, if I choose 0.0.0.0 0.0.0.0 g0/0, I cannot ping sites on the internet from the router.
I tried setting up ip nat inside for my LAN and ip nat outside for the WAN/internet uplink, but this did not work.
This was the issue, I missed finishing the NAT setup.I can make the router ping out all day, and have my PCs ping the router, but getting the connection between the two is not working.
View 2 Replies
View Related
Dec 30, 2011
Is it possible to re-route our Site 2 Site VPN over our Static Route (T1) if the WAN fails?
View 1 Replies
View Related
Dec 14, 2011
We've recently started using some 2911's on our network running IOS 15.0(1r)M9. I noticed, much to my frustration that the OIDs with the MIB RFC1213: ip RouteTable1.3.6.1.2.1.4.21 are not supported.
Any alternative MIB for viewing routing table information via SNMP on any of these devices running a similar IOS?
View 2 Replies
View Related
Jun 24, 2012
I have an ASA 5510 running ASDM 6.4(9) and Cisco Adaptive Security Appliance Software Version 8.4(4)1.I am trying to configure for the first time and I am accessing the ASA via its Management Interface.I am successfully able to connect to the device and get to the Cisco ASDM 6.4(9) page.When I try to run the startup wizard, a couple of prompts displays up to the point where the java applet runs and aks me to enter my IP, username and password.As it is a new system, password and username is blank so I enter and I get a message saying "loading software from cache" which later changes to "software Update completed" and then nothing happens.I am running MacOSX 10.7 Lion, Java version 1.6.0_33.I did try and run this on a Windows system and i was able to load the interface.
View 2 Replies
View Related
Aug 18, 2012
cisco 878 configured to accept client vpn requests. From client prospective people get error 412 and they can't connect. Not sure what s wrong, following configuration and debug isakmp. Autentication is through a radius server.
View 3 Replies
View Related
Apr 25, 2005
i have a bbsm server I'm bringing up on line. Trying to add the first site, i configured everything i think right, but the client gets a network error page, and the event log shows:
EventID:28
Source:BBSM_AtNotify
Description:
Failed to locate client ip:10.233.1.10 MAC: 00 00 00 00 00 db on any network device.
i did a debug on the AP1200 (12.3(4)JA) i am using and see that the bbsm is talking to the bbsm. I just can't figure out what i am doing wrong.
[code]....
View 2 Replies
View Related
Dec 13, 2010
I have a Cisco AnyConnect 2.5.2006 failing installation on an upgrade from 2.4.1012. Win7 64-bit.RunOnce exists in the registry and I even added everyone/full perms to it to make sure it wasn't a perms issue. (it seems everyone recommends checking this key exists)I've cleaned the system and the registry multiple time for anything AnyConnect related. The installation 'appears' to fail on the installation of the 64-bit virtual adapter
Installation log is attached to this post.
[code]....
View 11 Replies
View Related
Sep 6, 2012
Is there a known bug for Nexus 7K version 6.0(4) related to route redistribution?I have few vlan interfaces and being redistributed to the BGP.vlan interfaces are all up ang pingable.After configuring redistribution, vlan route is not in the bgp table.sho ip bgp is saying "path invalid"
BGP routing table entry for 10.165.101.192/28, version 26302
Paths: (3 available, best #3)
Flags: (0x180c0021) on new-list, is not in urib, need resync with RIB, exported, has label
vpn: version 47719, (0x100002) on xmit-list
local label: 492294
[code]....
View 7 Replies
View Related
Jan 16, 2012
I have setup the WLC to authenticate to a MS Server2008 NPS for a WPA2/AES SSID. The connection is successful, but client authentication fails for wrong EAP-type. I believe this indicates a Windows7 client issue. What is the required client setup to satisfy the MS NPS?
View 8 Replies
View Related
Feb 11, 2013
I have a problem when trying to access from a workstation on the internal network to an external FTP server using Explicit FTPS. After the server requires the client TLS Authentication the client inits TLS but the connection is closed by timeout.
I have disabled the FTP inspection on the firewall and I have opened some high ports from the Internet to the test workstation (ACL and NAT rules), but without results.
If I try to connect from a workstation to the FTP server using a direct Internet connection I can access the FTP server without problems, so I think the problem is in the ASA.
View 6 Replies
View Related
Apr 18, 2011
we are using Cisco VPN client to access our corporate network.I have 5 new notebooks Dell Latitude E6410 OS Windows 7 Professional x64, with identical hardware configuration.I downloaded Cisco VPN Client 5.0.07.440 (64 bit) and installed it on all notebooks. It works fine on 3 notebooks, while on 2 notebooks the VPN connection fails with error:
Secure VPN collection terminated locally by the client.
Reason 403: Unable to contact the security gateway
We use a smartcard for VPN access (etoken from Aladdin)
Here an extract from Cisco log:
Cisco Systems VPN Client Version 5.0.07.0440Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 6.1.7600...Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/4 CERT/0x63600015 Cert (cn=<omissis>,ou=Remote,ou=Users,ou=<omissis>,dc=it,dc=<omissis>,dc=local) verification succeeded....Sev=Info/4 CM/0x63100002 Begin connection process...Sev=Info/4 CM/0x63100004 Establish secure connection...Sev=Info/4
[code]......
It seems the problem is in the certificate, but I verified and Cisco client says it's ok. It's also the only valid certificate in MMC->Certificates->Personal.Furthermore, also using other smartcard (etokens) of other users it doesn't work.
View 5 Replies
View Related
Apr 21, 2010
I was trying to search for cisco vpn client version 5.x for MAC OS but only saw the latest version at 4.9. If version 5 is out for MAC? Also, what the latest possible version of the vpn client is for MAC that is compatible with both the vpn 3080 concentrator and asa5580?
View 5 Replies
View Related
Apr 28, 2013
I have a Linksys WRT310N v1 with firmware v1.0.10 build 002Jul 19, 2010 My router fails to renew it's DHCP lease from my cable provider, causing internet access to drop. I can still access my cable modem at 192.168.100.1, but I must do a "IP Address Release" then "IP Address Renew" to get back internet access. The router works fine otherwise.
View 6 Replies
View Related
May 29, 2013
I have installed the new version of DCNM Prime (Version: 6.2(1) and all installation process went well without any error or warning, DCNM SAN client works well I can loggin and manage my MDS and UCS, but I have big issue to run DCNM LAN client after successful logging I have window that freezing and nothing is displayed (see printscreen attachment) I reinstalled several time Java, installed four version different of Java, tried this client from three different PC and still have the same issue.
View 0 Replies
View Related
Jun 23, 2011
I am unfortately the only IT staff now for 100 - 150 users in my organization besides a consultant who doesn't have an answer for this issue even though he sold us the hardware and environment. While I realize that this version of the Cisco VPN doesn't support Windows 7, we do have some Windows 7 PC's that have the software and work perfectly fine upon install. In this case, I am at a remote location with both a Windows XP SP3 and Windows 7 SP1 computer. Both have the same Cisco client installed and connect to our ASA5520. I cannot get DNS resolution out of this computer to any remote network resources or other domains such as cnn.com including localhost. Adding the entries manually in the hosts file does nothing and I even tried removing the VPN client, the network connections and components and even a manual winsock reset. I cannot resolve internet DNS but can ping all internal IP addresses. The Windows XP computer across from me has no issues. I am not going to update any VPN clients as we still don't have computers who are functional so I need to spend money where it counts before I upgrade computers and I cannot perform a downgrade on this model because the previous person who bought it didn't bother to check Windows XP compatibility before they installed them in 10+ communities.
Here's my IP config - FYI all works well when not connected to the VPN for general web domains.
C:UsersAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : GHN-Green-S01 Primary Dns Suffix . . . . . . . :
[Code].....
View 2 Replies
View Related
Apr 20, 2011
We are using a CISCO1921-SEC (ISR) with IOS 15.1 and we configured a "crypto isakmp client configuration group". We can connect with the "Cisco System VPN Client Version 5.0.07.0410" via IPSec/UDP.
1. Is it possible to push routing informations to the System running the VPN Client ? A the moment all traffic is routed to the tunnel but we like only one route to the network permitted with "pool ..." in the "crypto isakmp client configuration group NAME" section.
2. We searched for changing from upd connection to tcp connection via special port. Is it possible with IOS 15.1 on the CISCO1921-SEC ? Is there something possible like "iskamp ipsec-over-tcp port 10000" ?
View 8 Replies
View Related
Jul 31, 2012
I have an ASa 5510 and setup remote dial in users.
I wanted to use the windows 7 built in client and also the draytek site to site VPN options however when they connect VPN traffic will not work however when i use the cisco VPN client then everything works fine.
All the VPN's connect pretty quickly.In the syslog I a getting errors when i try and ping something: [code]
View 2 Replies
View Related
Jun 21, 2012
I have a problem with VPN Passthrough with a NCP Client and Cisco ASA 5520 Version 8.4(3)A VPN IPSec Connection with a Cisco VPN Client through the Cisco ASA works fine.The NCP Client establish a connection with Source and Destination UDP 4500 to the remote VPN Gateway and the connection setup is aborted.If I establish a connection with a NCP Client on a Virtual Machine with NAT , the connection setup works fine.A connection setup under VM in Bridge mode is also aborted.The VPN Passthrough problem with the NCP Client started with the Update to version 8.4(3)The connection worked very well until version 8.2(5).
View 6 Replies
View Related
Feb 8, 2012
I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4. Any link or some material to config ipsec vpn client at asa 5505 version 8.4.
View 1 Replies
View Related
Jul 3, 2012
I would like to block internet IP address from VPN client. I tried setup a rule by using ADSM, the rule was hitted but no blocked. how to do it?
Our ASA Platform:
ASA Verison: 8.0(4)
ADSM Verison: 6.4(7)
View 6 Replies
View Related
Dec 4, 2012
I would like to know if there is a way I can use an XML file to pre-fill the connect field of the Anyconnect client version 3.0. In the past, I have been able to use an XML file to pre-fill information in the NAC agent so I could push it out to clients who didn't have administrator rights to their box. I was wondering if there is a similar method to do this with the Anyconnect client.
View 1 Replies
View Related
Feb 9, 2012
I have been working on trying to get an IPAD using the built in VPN client to connect to an ASA5510 version 8.2(5). I have attached the debug from where I have gotten so far. Phase 1 is failing somewhere but the messages aren't real clear or at leat not to me. The ASA is acting as the local CA for the certificate. I inherited the config from another guy as he couldn't get it working and I have made some progress but still not luck in getting the tunnel to just come up. Access to resources will be next but I'd like to just see the ipad show connected.
View 3 Replies
View Related
Jun 21, 2012
is it possible for a client to choose a WAN to use when being routed through a Multi-WAN router? Something that could be configured as default route in linux or default gateway in winxp ?Or is this decision totally up to the router itself ? [code] Could now a client on the subnet 192.168.0.0/24 choose 1.1.1.1 as a default route for example? And if not, could this be possible if the router hat some secondary internal IPs for both WAN interfaces.
View 3 Replies
View Related
Sep 3, 2011
I have an Airport Express and two wireless routers. The Airport Express is connected to Router 1 via Ethernet. Router 2 is connected to Router 1 via Ethernet. Since I like to know which Wireless Router I'm connected to, Router 1 & 2 use different SSIDs. Router 1 is the DHCP server (DHCP turned off on Router 2). All security settings are turned OFF.Router 1 is a Linksys WRT120N with latest firmware and Router 2 is a Belkin Wireless Router.I can connect via wireless to Router 1 and Router 2 via the seperate SSIDs and have Internet connectivity (Router 1 is connected the the Internet) and print to a wireless printer connecter to the Router 1 wireless network.
Now here is the strange thing. I can see the Airport Express only if I connect to the Router 2 wireless network!!! I cannot see it if I connect to the Router 1 wireless network, yet the Airport Express is connected via Ethernet to ROUTER 1 !So for some reason, the LinkSys WRT120N Wireless Router won't route the Airport Express to a wireless client on it's own wireless network, but it will route it to an Ethernet client which is what any client connected to Router 2 wirelesslessly is seen as. When connected to router 1 wirelessly I can ping the IP of the Airport but something is preventing it from working with iTunes/iPhone/Airport Utility. It is bizarre because these are all devices connected to the same LAN. SInce I can ping it, it tells me that it isn't a routing issue, but there must be some sort of filter between the wireless and ethernet that is preventing the Airport protocol from being transmitted.
View 1 Replies
View Related
Jan 14, 2012
i have a strange issue with an HSRP Setup. I have two (S1+S2) 3560 as Core/Distribution Layer. Inter-vlan routing are enabled on both Switches. S1 and S2 are connected with an ether channel over four fibre ports. S3 -S5 are the (L2) access layer.
Gi0/1 on S1 and S2 are L3 ports, connect to a Linux Firewall.
HSRP is enabled, S1 is the active router and the STP root bridge.
But, my monitoring via cacti show me, that the Gi0/1 on S2 is active, too! But it should not be active? Only if S1 fails, should S2 the active switch.A client from the access ports on S3 - 5 gets traffic from the Internet via Gi0/1 from S2. Gi0/1 on S1 is active too, but will send mostly traffic to the Internet. Why is S2 active and why route it traffic from the Internet to the client?
View 15 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
Jun 24, 2011
I've enabled antispoof on all interfaces on asa 5510.If you start a traceroute to a network on the default route, everything works, since replies comes to an interface with route 0.0.0.0/0 defined.If you start a tracer route to a network that is NOT on the default route (let's assume coporate MPLS), you only get response from first carrier router, the other are discarded because of anti spoof violation.
I have ICMP inspection and icmp-error inspection enabled.
View 1 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
Mar 11, 2013
which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies
View Related
