I've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24. I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under management i've added the VPN network of 192.168.50.0/24 to have access to ASDM, but still does not work.
View 1 RepliesI am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
How do I enable remote access to ASDM from outside of the network on the ASA 5505? This would be used for remote access to the firewall at a site that is not utilizing VPN.
View 5 Replies View RelatedI recently upgraded Java to JRE version 1.7.0 and now when I try to login to the ASA 5510, I get the following message in the java console log.Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: sun.security.ssl.X509TrustManagerlmpl cannot be cast to com.sun.net.ssl.internal.ssl.X509ExtendedTrustManager at com.sun.deploy.security,X509ExtendedDeployTrustManager.<init>(Unknown Source)
View 5 Replies View Relatedso we have been using our current ASA5505 for a long time. Since it only support up to 10 VPN licenses, so we buy a new ASA5505-SEC-BUN-K9(support up to 25 users).
the old ASA are running: 8.0.3 and ASDM 6.0.3
the new ASA are running: 8.2.5 and ASDM 6.4.5
I thought it would be simple as export and import the config file, but when i tried to restore, the new one is looking for a zip file but the old one doesn;t backup file in ZIP. It looks like i need to update the ASA version or/and ASDM?
I am pretty new to this and never upgrade any of these versions since I am aware of the upgrade may mess things up. So do I need to upgrade both the ASA version and the ASDM in order to restore my config? any effect if i do the upgrade? I also read some articles, we need to upgrade on the version one by one, like 8.0 to 8.1 then 8.2?
configuring the ASA particulary after the change to how NAT is implemented. What I am trying to accomplish logically seems fairly simple, yet I cannot get it to work. I have a Synology NAS at home that I am trying to reach via the internet. Prior to using my ASA, I had Verizon's FIOS router as my gateway and everything forwarded with no issues. The ports I need forwarded or reachable via the internet are TCP port 80 and 5000.I can also configure it via command line if that's the easier/preferred method.
View 11 Replies View RelatedI have two identical ASA 5505. I can only access through https/asdm on one of the devices from same laptop. Below is the configuration of the ASA. My internal machine ip address 10.0.0.10/8. I have tried to remove and re-enter the "http" and "Crypto key" related command. Wireshark show "Alert (level: Fatal, Description: Handshake Failure)" right after I entered URL in browser-tried IE and Chrome. Java version should not be a problem as I can access the second ASA.
View 5 Replies View Relatedim working on a small project on a asa 5505 and beacuse i do most of the work from the outsidei want to open up asdm without vpn.
i have it working on another asa and the only difference is the rom version.the one not working is 8.0(5) - 6.2(3) and the one working is 8.0(4) - 6.1(5) did they do some changes?
I have been browsing the forum and the support notes for a couple of hours and haven't found a definitive answer to my question. Our ASA is on the subject versions. I watched a video on YouTube stating that upgrading the ASA is easiest if you upgrade ASDM, then the ASA. Problem is, I don't think I can upgrade ASDM first because I don't see a version that is compatible with ASA 7.2.x and 8.0.x.
View 3 Replies View RelatedI want to kown if is posible install IOS 8.3(2) and asdm 6.3(1) in firewall 5505 wich has 512MB of RAM and 128MB of flash. I installed it but according to the cisco page it can´t. maybe could work bad ?
View 1 Replies View RelatedI have a firewall Cisco ASA 5505, and currently it is a command line firewall. I want to configure ASDM so that i can use it as a GUI Web Base interface.I really don't know what to do. How can I configure ASDM on my firewall.
View 7 Replies View RelatedI have a standard ASA 5505 with inside, dmz and outside with the default security levels, 100/50/0. we have an email server inside which has been NATed and is working fine. However users accessing the wireless on the dmz are unable to access their emails on https (443). How do I allow SSL access ONLY to users on the dmz using ASA 8.4 commands or ADSM 6.4?
View 10 Replies View RelatedI am trying to configure a site to site ipsec vpn with 2 cisco 5505 ASA's. Unfortunately when i open up the ASDM there is no vpn wizard to start the configuration.The version of ASDM i am using from flash is 645-206.bin and the firmware on the ASA's is 842-k8.bin so should be ok. Why the VPN wizard doesnt appear?
View 7 Replies View Relatedrecently, ater successfully connecting the VPN to the ASA 5505, I am unable to then launch the ASDM client meaning that I can only SSH in to the unit.
I found an old post from 2008 and replied. It refers to an article talking about it is not possible to enable https server and webvpn on the same interface.
Well I am running ASA 8.0(4) so this restriction does not apply.
I have successifuly upgraded ASA and ASDM image. My question is how to make it to boot it as default when you do a factory reset of the device. For the ASA image I found out that it will boot the first image it founds on the flash, so I left only the latest bin file and if I do factory reset it boot the latest. But for ASDM it still boots the old one, because there is no "asdm image disk0:/asdm-645.bin" command in the config. I`m not sure how, because I only left the new ASDM bin image. Is there any variable or something that still points to old asdm image?
My ASA version is 8.4(2) and ASDM 6.4(5). The old one was ASA 8.2 and ASDM 6.3.
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server: [code]
Remote LAN pool is configured as inside. Route is proper. I am able to open 443 port from the remote LAN pool on the ASA. That means, the port is open from the remote pool. No response if I try https on the browser.
View 11 Replies View RelatedI have a Cisco ASA 5505 V10. I've upgraded it to use asa825-K8 & asdm-649.103. Before the upgrade I was able to get to the ASDM via https://192.168.1.1. However after the upgrade I just get a page cannot be displayed. I have rebooted the ASA.
View 4 Replies View RelatedMy macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies View RelatedToday I upgraded my Cisco ASA 5505 ASDM from version 6.34 to 6.41 cause of some problems on old version with NetFlow. But now when I switch to dashboard i can not see "Top Usage" tab. That was quite usefull for me. It simply disappeared.
Can i somehow configure which tabs are displayed on dashboard ? I really need that one and I do not want to downgrade :/
We have an ASA 5505 and are changing ISPs so we'll be getting a new static IP address. How do I change the external IP address using ASDM? (I haven't done it in 5 years so I'm rusty and just want ot make sure.) The ASA and ASDM are up to date.Am i correct in that I only need to change the external address in the configuration under Interfaces, then under Routing - Static Routes - Gateway IP I just need to enter the new WAN gateway address?
View 2 Replies View Related I am trying to open up 3 TCP ports in Cisco ASDM Launcher:
16000
16001
8098
And have a Cisco ASA 5505 Router. I need these ports open in order for a software that I have installed on the server to communicate with my local client computers for my business, The software is installed on Windows 2008 Server Standard Edition and was installed with MicrosoftSQL 2005. The software and Microsft SQL 2005 is pretty much installed and just requires this last step in order for the server to be connected to the local computers. In order to resolve this, I have gone to.
I have an ASA-5505 which I have been managing using ASDM from a PC and a Mac.I just happens that the Mac has not been used in a little while and when I tried to use ASDM on it, it fails.I've had a trawl through various posts and release notes (after updating various components in the process, incl Java with all the diabling/security updates of late) but am still having the problem and this is where I'm at:
- the ASA runs v8.4(2) and ASDM 7.1(1)52
- release notes state that ASDM 7.1 should work on Java 7 on Windows 7 and MacOS 10.7
- ASDM starts fine on my Windows 7 PC running Java 1.7.0_13
- I am also running Java 1.7.0_13 on MacOS 10.7.5
- on MacOS, ASDM starts, asks for credentials, download/refreshes the cached app... and then crashes with the following exception message:
The root cause of the issue seems to be that a Java class called apple.laf.AquaTableHeaderUI is not found..Now, I don't know much about Java, but that seems to be an Apple UI related class - I presume that it would be good to use this to give ASDM a more native look and feel, but why on earth is there no fallback? or am I missing something?
I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
View 2 Replies View RelatedI was checking out the config on my ASA and noticed a bunch of static routes configured when I did a show route. With the exception of two that I expect to be there, the remainder point traffic destined for specific internal hosts to the outside interface, i.e.
S private_ip 255.255.255.255 [1/0] via public_ip, outside
I verified that I cannot ping those hosts from the firewall. I logged in to the ASDM. When I check the Configuration>Device Setup>Routing>Static Routes it only shows two static routes, the ones I expect to see. If I look under Monitoring>Routing>Routes, I see the same output as I did on the CLI. I looked around to see if I was missing a key location for this information, and I was able to see the same static routes output in Monitoring>Routing>Routes. Since this is under monitoring though there's no way to delete these routes, and I still don't know where they were configured originally. Then I happened to check under Monitoring>VPN>VPN Statistics>Sessions, and I see several of the private IPs used in the static routes being used by VPN users, including my own! I know I didn't assign myself a static IP for VPN use or anything like that. So, what are these static IP routes? Why do I see them in the CLI and not under the Configuration tab? I mean, I know I can delete them from the CLI but I'm trying to figure out why the info is not synced. Am I seeing dynamically created content based on the VPN connections?
I am trying to use the apple finder/application to view all my apple mac-mini computers. I do have two asdm-5505 connected via a vpn tunnel.
At this point I can view only the computers on the local subnets. I called AppleCare and they gave some possible ports that can be opened in the firewall to allow the Bonjour protocol to pass through the ASDM:ports 5297/tcp, 5298/tcp-udp, 5353/udp, and 5354/tcp
I have a server that I need to open up some ports on to allow access to the new internal Sharepoint server we're setting up. I've been having some issues getting the ports open like once I put the commands in and save them that server suddenly stops allowing outbound traffic. After looking at a few things I noticed while I was looking at the config file that the ASDM location is showing 2 IP's, both are the same as the server I'm trying to open ports for one being the private IP and the other is the public IP I'm trying to use. Is this the reason I'm having problems when I try to open those ports to my server? Do I need to use both a different private and public IP for this server so I can get my ports to work? The programmers selected these IP's so if I need to change them I'll let them know in case they need to make changes for the Sharepoint setup. This is on an ASA 5505.
View 12 Replies View RelatedI completed the PIX 515 to ASA 5505 migration today with no problems - ok one problem with the logon for ASDM. I'm trying no username and password - then using username and password from the 515 Pix with no success. How to reset the username and password for the ASDM GUI website.
View 3 Replies View RelatedDoes my device not support enough encryption to get ASDM/SSL/HTTP working?
First time I've ever seen this...:
%ASA-7-609001: Built local-host inside:192.168.1.10 %ASA-7-609001: Built local-host identity:192.168.1.1 %ASA-6-302013: Built inbound TCP connection 13 for inside:192.168.1.10/61194 (192.168.1.10/61194) to identity:192.168.1.1/443 (192.168.1.1/443) %ASA-6-725001: Starting SSL handshake with client inside:192.168.1.10/61194 for TLSv1 session. %ASA-7-725010: Device supports the following 1 cipher(s). %ASA-7-725011: Cipher[1] : DES-CBC-SHA %ASA-7-725008: SSL client inside:192.168.1.10/61194 proposes the following 11 cipher(s). %ASA-7-725011: Cipher[1] : DHE-DSS-AES256-SHA %ASA-7-725011: Cipher[2] : AES256-SHA %ASA-7-725011: Cipher[3] : DHE-RSA-AES256-SHA %ASA-7-725011: Cipher[4] : DHE-RSA-AES128-SHA %ASA-7-725011: Cipher[5] : DHE-DSS-AES128-SHA %ASA-7-725011: Cipher[6] : RC4-MD5 %ASA-7-725011: Cipher[7] : RC4-SHA %ASA-7-725011: Cipher[8] : AES128-SHA %ASA-7-725011: Cipher[9] : EDH-RSA-DES-CBC3-SHA %ASA-7-725011: Cipher[10] : EDH-DSS-DES-CBC3-SHA %ASA-7-725011: Cipher[11] : DES-CBC3-SHA %ASA-7-725014: SSL lib error. Function: SSL3_GET_CLIENT_HELLO Reason: no shared cipher %ASA-6-302014: Teardown TCP connection 13 for inside:192.168.1.10/61194 to identity:192.168.1.1/443 duration 0:00:00 bytes 7 TCP Reset by appliance %ASA-7-609002: Teardown local-host inside:192.168.1.10 duration 0:00:00 %ASA-7-609002: Teardown local-host identity:192.168.1.1 duration 0:00:00
I used ASDM to upgrade a 5505 tonight and now I get the error message attached. How/where do I find out which versions are compatible?
View 2 Replies View RelatedI need to fullfill the below configuration which is working fine on my actual D-Link Netdefend firewall.
We have a range of IP assign by our ISP : 194.250.47.128/29
194.250.47.129 is the firewall IP and 134 the isp gateway.
We have 4 interfaces
- The local user interface: lan =192.168.170.1/24
- The servers interface : dmz =192.168.171.1/24
- The database interface : oracle=192.168.169.1/24
[Code]...
What anyconnect version do I need on a 5505 so i can have people connect via iOS devices? Right now I have "anyconnect-macosx-i386-2.5.1025-k9.pkg" on there, will that work for iOS devices?
View 7 Replies View RelatedASA 5505 Version 8.2 or older nat (inside) 1 10.0.0.0 255.255.255.0nat (INTF4) 1 10.0.4.0 255.255.255.0nat (INTF5) 1 10.0.5.0 255.255.255.0nat (INTF6) 1 10.0.6.0 255.255.255.0nat (INTF7) 1 10.0.7.0 255.255.255.0global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224global (outside) 1 interface
I believe this setup does the following. The inside interface and interfaces 4,5,6,and 7 will translate using this line....
global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224
and if the addresses run out is will start using the ouside interface IP address to translate, so traffic is not disrupted and is based on the line of configuration.....
global (outside) 1 interface
My question, does it do this because of the order of the configuration..
global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224global (outside) 1 interface
or would it do it that way even if it was like this?
global (outside) 1 interfaceglobal (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224
and if so why?Now let's convert the above configuration to ASA 5505 Version 8.3 or newer.
object network OUTSIDE-NAT-POOLrange 209.165.200.235 209.165.200.254object network INTERNAL-SEGMENTSsubnet 10.0.0.0 255.255.248.0nat (any,outside) dynamic OUTSIDE-NAT-POOL interface
My question is how does it know to use the outside interface as a backup when the OUTSIDE-NAT-POOL is depleted?Also why do I need to define the INTERNAL-SEGMENTS ? Doesn't the "any" in the (any,outside) take care of that?Also wouldn't the "any" in (any,outside) cover interface 3 or DMZ which could be an issue?