Cisco Firewall :: Basic Port Forwarding ASA5505 Version 8.4 ASDM 6.4?
Nov 24, 2012
configuring the ASA particulary after the change to how NAT is implemented. What I am trying to accomplish logically seems fairly simple, yet I cannot get it to work. I have a Synology NAS at home that I am trying to reach via the internet. Prior to using my ASA, I had Verizon's FIOS router as my gateway and everything forwarded with no issues. The ports I need forwarded or reachable via the internet are TCP port 80 and 5000.I can also configure it via command line if that's the easier/preferred method.
View 11 Replies
ADVERTISEMENT
May 27, 2013
so we have been using our current ASA5505 for a long time. Since it only support up to 10 VPN licenses, so we buy a new ASA5505-SEC-BUN-K9(support up to 25 users).
the old ASA are running: 8.0.3 and ASDM 6.0.3
the new ASA are running: 8.2.5 and ASDM 6.4.5
I thought it would be simple as export and import the config file, but when i tried to restore, the new one is looking for a zip file but the old one doesn;t backup file in ZIP. It looks like i need to update the ASA version or/and ASDM?
I am pretty new to this and never upgrade any of these versions since I am aware of the upgrade may mess things up. So do I need to upgrade both the ASA version and the ASDM in order to restore my config? any effect if i do the upgrade? I also read some articles, we need to upgrade on the version one by one, like 8.0 to 8.1 then 8.2?
View 4 Replies
View Related
May 25, 2011
I have a Windows 2003 server running a L2TP VPN server on it. I'm putting theASA5505 in replacement of an open source firewall.
My question is that, I can't seem to forward the ports correctly for L2TP to the internal address of the 2k3 VPN server. It seems to me that the ASA is trying to negotiate the VPN connection rather than forward it internally.
Cisco ASA5505
WAN 216.136.1.2
LAN 10.1.1.1/24
Windows server - 10.1.1.14
I've added the NAT and ACL and still nothing.
View 2 Replies
View Related
Apr 6, 2012
I'm not able to access my Slingbox from the outside. I've set up port forwarding on port 5001 to allow outside connections in, but port forwarding isn't working. Am I missing something?
object network INSIDE-HOSTS
subnet 10.10.10.0 255.255.255.0
object network Slingbox
host 10.10.10.254
object-group protocol TCPUDP
[code].....
View 13 Replies
View Related
Jun 1, 2011
I have an ASA 5505 on a job. It is a smaller business that would have done better with an RV082, but they have what they have. It is running firmware 8.4. The client needed ports forwarded for their FTP server. The port range in this config is tcp 43333-43339. The FTP server ip is 192.168.1.2. [Code] ......
View 8 Replies
View Related
Apr 18, 2012
How to configure this setup.I have an ASA5505 with dual wan failover, FiOS (eth0) & Cable (eth1). how to configure the port forwarding for all my devices so it doesn't matter what external interface the traffic is coming from. For example, I need web traffic on port 80 forwarded to 192.168.1.150 regardless of whether it is coming through eth0 or eth1.
View 2 Replies
View Related
Dec 20, 2011
I have installed ASA5505 in the network. Port forwarding has been done for one of the server in our LAN. Public users are able to access the server successfully. I am trying to access from inside using the same Public server IP, but unable to access it. Can I have this feature in ASA5505(I think it is loopback configuration). If so, may I know the configuration detail?
View 4 Replies
View Related
Jun 21, 2012
ASA 5505 Firmware 8.3(4), ADSM 6.4(2).I have a public IP address of 168.87.3.4.I need to forward ports (5060, 5080, etc.) to one internal address. (192168.1.1).I need to foward different ports (10020-10080) to a different internal address (192.168.1.2) Everything I read tells me how to do this in a 1 to 1 static NAT.
View 1 Replies
View Related
Mar 21, 2013
i have test to access the firewall of ASA5510 with ASA845-K8/asa902-k8bin + asdm-712.bin +JAVA6 / 7, is completely no problem
When i try to install a new ASA5505 existing IOS is asdm825-k8 and also asdm-712 with JAVA7 is not allow to access the firewall with ASDM
After i type in username password, it stuck on the page loading , sometimes it will come up with cannnot to the device something like that.
telnet and SSH is no problem, i still can download the IOS with TFTP.
I think may be the java problem, because i just to connect with wrong ip and password, it also stuck in this page.
View 8 Replies
View Related
Feb 13, 2012
I have the following setup:
ADSL ---> Cisco 877 with connected site-to-site VPN's ---> Cisco ASA 5505 with Remote VPN enabled
I want to connect my Android phone to the Cisco ASA 5505 with Remote VPN. When I forward port 500 and 4500 on the Cisco 877 to the Cisco ASA5505 I can connect with the phone.
But as expected, the site to site connections are lost because now they try to reach the ASA 5505 also.
I want to exclude the site to site external IP addresses from doing static NAT to the ASA 5505...how can I accomplish this ?
View 3 Replies
View Related
Sep 10, 2012
Running ASA 5505
ASA Version: asa844-1-k8.bin
ASDM: Cisco ASDM 6.2(1)
I updated my ASA with version asa844-1-k8.bin.
However, whenever I try and run the ASDM client, I get the following error:
"Your ASA image has a version number 8.4(4)1 which is not supported by ASDM 6.2(1)."
How do I get the latest version installed on my Mac desktop? I know that I can connect via the web interface and run the ASDM client, but the same error persists. I have the asdm-649-103.bin file, but cannot connect to the ASA to install (I don't recall ever setting up SSH).
View 5 Replies
View Related
Jan 20, 2013
I've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24. I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under management i've added the VPN network of 192.168.50.0/24 to have access to ASDM, but still does not work.
View 1 Replies
View Related
Aug 14, 2011
I recently upgraded Java to JRE version 1.7.0 and now when I try to login to the ASA 5510, I get the following message in the java console log.Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: sun.security.ssl.X509TrustManagerlmpl cannot be cast to com.sun.net.ssl.internal.ssl.X509ExtendedTrustManager at com.sun.deploy.security,X509ExtendedDeployTrustManager.<init>(Unknown Source)
View 5 Replies
View Related
Mar 20, 2013
I am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
View 3 Replies
View Related
Jul 11, 2012
I have a network with 3 sites that are on different subnets. Each site has an ASA Right now, I am only able to connect to the ASA that is connected to the subnet I am connected to.I want to be able to connect to the ASA that are on the remote subnets on the address of the inside interface.The sites are connected all together by site-to-site VPN.Is there any way I can achieve that without opening the outside interface directly on the Internet?
View 2 Replies
View Related
Apr 30, 2013
Yesterday, I configured ASA via CLI for Static PAT and created some entries in an access-list. I will be testing that setup this evening.
However on a quick double check of the settings on the device via ASDM I could not see the acess-list settings. I searched every tab and found nothing so I PuTTYed into the device and checked the running config. The rules I created were right there. Is this something I should expect? If so doesn't it defeat the point of having a GUI if it does not show a complete running config?
View 2 Replies
View Related
Apr 20, 2011
I am ordering ASA5505-UL-BUN-K9. By default device comes with which IOS version?
View 3 Replies
View Related
May 9, 2013
what the upgrade path is for 5505 ASA . I have one which is version 7.2 and need to upgrade it to 8.4(5). I have read that it needs to upgraded btwn major release versions.Not sure if I need to upgrade from 7.2 - 8.0 , then form 8.0 - 8.2, then from 8.2 - 8.3 and finally 8.3 to 8.4 or can I just upgrade from 7.2 - 8.2 and then from 8.2 - 8.4 .Also what is the minimum memory requirements for vers 8.4 .my ASA running on vers 7.2 currently has 256Mb Memory and I will be upgrading this to 512MB before I do the upgrade the image above?
View 4 Replies
View Related
Jan 9, 2012
I am wondering if it's possible to convert a Pix 501 configuration running version 6.3(5) to a new ASA5505 which we just purchased? We have site to site VPN on this device and i am just trying to save some time. I believe Cisco TAC might have a tool to do this but i am not sure.
View 4 Replies
View Related
Oct 20, 2012
I would just like to to open UDP port 123 in the ASA 5510 Firewall so that our Primary Domain Controller could use this port to sync time with an external time source. We have already added an access rule for this port under the firewall configuration in ASDM 6.4 and this port was also allowed in the inbound and outbound rule of the PDC's Firewall but it seems that it was still blocked.
View 23 Replies
View Related
Apr 8, 2012
I teach in a High School and we've got about a 300 node MS Windows Network. Two MS2003 File Servers act as my DNS/WINS/DHCP servers. We have been using a WATCHGUARD FIREBOX III to act as the router/gateway between the outside external address and my internal (10.0.0.1) gateway address. All p.c's inside the network are routed to one of the Servers (10.0.0.2 or 10.0.0.4) for DNS/WINS/DHCP addressing. The servers point to 10.0.0.1 for gateway.
We are trying to replace the Watchguard Firebox with a CISCO ASA 5505 (eventually we'd like to implement VPN). When I connect the CISCO ASA, I get no internet passthrough at all.
View 1 Replies
View Related
Dec 2, 2011
So here is my network.
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
and here is my dilemma.
I can SSH from the internet to my ASA on default port 22, directly to my public IP. I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960. From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841. I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
The bottom line is that i want to be able to SSH to all three devices from the internet. I only have one public IP. As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001. It appears that changing the default SSH port on Cat 2960 is not an option. It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
show asp table socket
TCP 001f549f <<pub IP>>:22 0.0.0.0:* LISTEN
how do i make it listen on different port?
Here is relevent config for SSH for cisco 1841 (port forwarding)
ON ASA
object network ROUTER
host 10.10.1.1
[Code].....
View 28 Replies
View Related
Apr 10, 2012
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server: [code]
View 1 Replies
View Related
Apr 7, 2013
I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.
View 1 Replies
View Related
Nov 26, 2012
I am attempting to block outbound traffic for a specific PC on my LAN using the ASDM.
View 2 Replies
View Related
Nov 7, 2011
I have interfaces defined on the 5505:
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
[Code].....
I only need one interface to connect to a single host on the inside (VLAN1) and then connect E0 to a DSL.
Is it possible (are what are the commands required) to take one of the other interfaces and create a Management port on the local office LAN?
View 2 Replies
View Related
Aug 9, 2012
I have a cisco 5520 with 8.4.4(1) and I already have a NAT for an email server on it.Here is the IP and ports on current configuration:
Email Server Private IP: 1.1.1.1
Email Server Public IP: 2.2.2.2
Email Server Local Ports : 25, 587
Right now I have ports 25 and 587 opened for 2.2.2.2 so, now I need to add a port redirection for another port:
New Port : 8925
I need to redirect 2.2.2.2:8925 to 1.1.1.1:587
View 1 Replies
View Related
Apr 11, 2013
i'm having a problem portforwarding/redirection for the pix 501?I'm trying to open the ports 49003 and 40085 in order to view our dvr remotely and i'm not exactly sure how to it.
View 11 Replies
View Related
Nov 5, 2012
I have an issue with portforwarding in my teleeye cctv behind asa 8.4. I can browse the DVR outside via http however when i attempt to login, "server busy" will prompt afterwards. Note: Theres no issue when acesssing the DVR locally.
Heres my config.
OUTSIDE INTERFACE:
interface Ethernet0/3
speed 100
duplex full
[Code]...
View 4 Replies
View Related
Mar 26, 2013
I just bought a Cisco ASA5505. I'm trying to opening a port range through CLI, but it doesn't seem to be working.
Background:I have an FTP Server running behind the firewall and need to allow port ranges 30000-30100 for data connections. I have been using FTP through the command prompt and its working. However, I cannot use it through the FileZilla client as it fails to query the directories. I have the ASA forwarding to port 1125 from 21 in passive mode.
Access-List:
access-list Outside_Access_In line 3 extended permit tcp any any eq ftp-data (hitcnt=0) 0xfa8ed43d
access-list Outside_Access_In line 4 extended permit tcp any any eq ftp (hitcnt=17)
[Code].....
View 14 Replies
View Related
May 2, 2011
i have a asa with a outside IP address of 140.32.121.5. behind this firewall i have a cisco MWR 2941 that i would like to connect to via telnet. its inside ip address is 10.10.10.2. my reasoning for this is because i cannot SSH or telnet from a ASA so i need to have the ASA push my telnet request to the router on its inside interface.i have tried some NAT examples but i am very green with NAT. i have also built access lists that look like the follow " access-list 101 permit tcp any 10.10.50.2 eq 23. and then tied the access-group 101 with the outside interface. this also with no success.
View 1 Replies
View Related
Oct 30, 2012
I need to open port range 554 - 558 to a DVR on the internal network. Also, I need to NAT one of my public IP's to the DVR. How is this accomplished in 8.4? I was able to do it in an older version ASA software.
View 3 Replies
View Related
Sep 4, 2012
I've tried setting up some simple port forwarding on my ASA, where I want to forward one port on the external interface for both UDP and TCP to the same port on an internal server.
It works fine for UDP, but all TCP packets are dropped on the outside interface, even though the configuration for UDP and TCP is basically the same! This is my config:
object network MY_SERVER
host 10.10.1.4
object service TCP_MY_SERVICE
[Code].....
Port count goes up on line 2 (UDP) but never for line 1. I just see the packet denied instead. Same thing happens in the packet tracer, a packet destined for my external interface on that port for UDP is allowed and NAT'd just fine. TCP it gets dropped by the ACL on the outside interface.
View 15 Replies
View Related
