Cisco Firewall :: 5505 - Opening TCP Ports In ASDM Launcher
Jun 20, 2011
I am trying to open up 3 TCP ports in Cisco ASDM Launcher:
16000
16001
8098
And have a Cisco ASA 5505 Router. I need these ports open in order for a software that I have installed on the server to communicate with my local client computers for my business, The software is installed on Windows 2008 Server Standard Edition and was installed with MicrosoftSQL 2005. The software and Microsft SQL 2005 is pretty much installed and just requires this last step in order for the server to be connected to the local computers. In order to resolve this, I have gone to.
View 1 Replies
ADVERTISEMENT
Jul 10, 2011
I recently bought the ASA 5505 but am unable to download the ASDM Launcher or VPN client software
View 2 Replies
View Related
Sep 11, 2012
I was logged into our ASA 5505 via ASDM-IDM Launcher (everything was working) and when I tried to update a change later on today it was unable to send the request. I tried to ping the device and the request timed out. The internet is still working, the VPN connections are still up. But I cannot connect into it anymore.
View 4 Replies
View Related
Jan 2, 2013
I am trying to configure a new 5505 but I am having difficulties opening ports that allow traffic in from the outside. My setup is Comcast Business Modem (w/ single static IP) -> ASA (10.0.0.1) -> (dumb) Switch -> NAS (10.0.0.10). I am attemping to open port 5001 to the NAS. I am very new to IOS so I have mostly been working in ASDM. Not sure if I am overcomplicating this for myself or what but I am stuck.
My running config is -
ASA Version 8.2(5)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
[Code].....
View 4 Replies
View Related
Feb 25, 2011
I am used to setting up access-lists on outside interfaces with ip addresses that are static. I have recently been given a site that is using a dyndns.org client for name to ip address resolution on an outside interface that is dhcp assigned. I created an access-list to open up ports 41794 and 41795 to an engineering application but everytime I try to connect from the outside I get a syn timeout. The application works when inside the lan. Basically I want to allow outside connections from anywhere on the outside to go to ports 41794 and 41795. I am running a Cisco ASA 5505 on version 7.2(4) Below is my conifg. what I may have misconfigured?
: Saved:ASA Version 7.2(4)!names!interface Vlan1 nameif inside security-level 100 ip address 172.31.2.1 255.255.255.0!interface Vlan2 nameif outside security-level 0 ip address dhcp setroute!interface Ethernet0/0 switchport access vlan 2!interface
[Code].....
View 5 Replies
View Related
Jun 16, 2011
i have an issue with ASA 5510.
I connect to the device - https:/interface
I see the options such as download launcher etc.
But.. whenever I click on this I get stuck
Internet Explorer gives "page not found"
Or at the foot of the page it says "unable to download statup_lr"
Firefox says cannot connect
It is running 6.2.5.53
I can connect if I go to a PC where I have already downloaded the ASDM launcher (from many years ago)
Tried Win 2003, 2008 and Vista, and Windows 7
Tried downgrading to Java 6 r 7. Can I download the launcher from the Cisco website rather than the device? If so where?
View 2 Replies
View Related
May 13, 2011
The ASA 5510 is working with asa8.3.1 and asdm 6.3.1. ( with factory default config )i ve upgraded to asa8.4.1 and asdm 6.4.1.Now the asdm launcher is frozen after username/password. The asdm upload the software and write that "software update completed".After it the hour glass or sand-glass is visible over the asdm window.
View 2 Replies
View Related
Jan 23, 2013
Where a 5510 running 7.2.4 code and being accessed via a web browser, stops initializing the main window at 87%?We can access the box via telnet and the CPU is running at 5%. The other error message is a warning the our OS is not supported by ASDM and we may encounter problems running the application.
View 3 Replies
View Related
Aug 22, 2012
yesterday I tried to connect to our ASA 5520 using ASDM Launcher, which has alwasy worked before. For some reason ASDM Launcher is no longer working from both my Win XP desktop and Win XP laptop. I can open ASDM through the browser but not the launcher. Both desktop and laptop have Java 7 U 6. I'm not sure if I can back rev my Java.
View 4 Replies
View Related
Apr 21, 2011
Where I can get the most recent install file for the ASDM-IDM Launcher software? I'm currenly running 1.5(41). Somebody mentioned they are at least up to 1.5(50), but he couldn't remember where the install file was. I checked Cisco's software download site, but nothing came up for the Launcher.
View 2 Replies
View Related
Apr 24, 2012
We have a DVR here at work that has a web interface on port 100. From our internal network we just use http:192.168.100.40:100. What is the best way to set that up on cisco 5510 firewall. I have cisco asdm and set a access rule: enabled=checked ; source=any ; destination= 192.168.100.40 ; service= tcp 100 ; action=permit. It shows a couple of hits when I go to [URL]
View 7 Replies
View Related
Oct 2, 2012
I need to open some outbound ports in order for our CCTV company to receive alarms from our internal CCTV Machine.
The ip addresses of the company who access the CCTV are as follows:
213.130.134.56
81.130.198.97
The above are fixed IP addresses. The internal machine is on 192.168.204.170
The outbound ports that I need to open are the following:
TCP
21
23
80
5201
UDP
1025
2074
2075
I have access to the current config if needs be.
View 8 Replies
View Related
Nov 7, 2011
We have just acquired a cisco profile 42 video conferencing equipment and am required to open ports for SIP and H232, any pointers on hw that can be acquired i have a cisco ASA 5510, Some one told me to open port 16384 but i need pointers on how to do it becuase I already set an access list to any.
the config
Internet -> ASA 5510 -> Switch -> Profile 42 and other devices
View 5 Replies
View Related
Apr 5, 2012
my friend was against a wall trying to update her office's system, and it seems like every Cisco person in the region has gone on vacation.For some sort of new system her office is getting, she was told that she needed to enable NAT with external IP xxx.xxx.xxx.14 (The ASA's IP is xxx.xxx.xxx.11) and internal IP xxx.xxx.xxx.58 and that port 8222 needs to be open. I know this is sort of vague, but it's what she was given, and I know the 8222 port is very specific in function,?
At any rate, the best I could come up with was to run:
static (inside,outside) xxx.xxx.xxx.58 xxx.xxx.xxx.14 netmask 255.255.255.255
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq www
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq https
access-list inbound extended permit tcp any host xxx.xxx.xxx.11 eq 8222
access-list inbound extended permit udp any host xxx.xxx.xxx.11 eq 8222
access-group inbound in interface outside
But after I inserted this, she did what she was supposed to be able to do (went home and tried to run some sort of remote installation file) and it didn't work...
View 8 Replies
View Related
Jun 9, 2013
We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies
View Related
Sep 22, 2011
im working on a small project on a asa 5505 and beacuse i do most of the work from the outsidei want to open up asdm without vpn.
i have it working on another asa and the only difference is the rom version.the one not working is 8.0(5) - 6.2(3) and the one working is 8.0(4) - 6.1(5) did they do some changes?
View 6 Replies
View Related
Feb 28, 2013
I have been browsing the forum and the support notes for a couple of hours and haven't found a definitive answer to my question. Our ASA is on the subject versions. I watched a video on YouTube stating that upgrading the ASA is easiest if you upgrade ASDM, then the ASA. Problem is, I don't think I can upgrade ASDM first because I don't see a version that is compatible with ASA 7.2.x and 8.0.x.
View 3 Replies
View Related
Feb 19, 2012
I want to kown if is posible install IOS 8.3(2) and asdm 6.3(1) in firewall 5505 wich has 512MB of RAM and 128MB of flash. I installed it but according to the cisco page it can´t. maybe could work bad ?
View 1 Replies
View Related
Sep 14, 2011
I have a firewall Cisco ASA 5505, and currently it is a command line firewall. I want to configure ASDM so that i can use it as a GUI Web Base interface.I really don't know what to do. How can I configure ASDM on my firewall.
View 7 Replies
View Related
May 21, 2012
I have a standard ASA 5505 with inside, dmz and outside with the default security levels, 100/50/0. we have an email server inside which has been NATed and is working fine. However users accessing the wireless on the dmz are unable to access their emails on https (443). How do I allow SSL access ONLY to users on the dmz using ASA 8.4 commands or ADSM 6.4?
View 10 Replies
View Related
Oct 1, 2012
I am trying to configure a site to site ipsec vpn with 2 cisco 5505 ASA's. Unfortunately when i open up the ASDM there is no vpn wizard to start the configuration.The version of ASDM i am using from flash is 645-206.bin and the firmware on the ASA's is 842-k8.bin so should be ok. Why the VPN wizard doesnt appear?
View 7 Replies
View Related
Jan 3, 2010
recently, ater successfully connecting the VPN to the ASA 5505, I am unable to then launch the ASDM client meaning that I can only SSH in to the unit.
I found an old post from 2008 and replied. It refers to an article talking about it is not possible to enable https server and webvpn on the same interface.
Well I am running ASA 8.0(4) so this restriction does not apply.
View 16 Replies
View Related
Nov 16, 2011
I have successifuly upgraded ASA and ASDM image. My question is how to make it to boot it as default when you do a factory reset of the device. For the ASA image I found out that it will boot the first image it founds on the flash, so I left only the latest bin file and if I do factory reset it boot the latest. But for ASDM it still boots the old one, because there is no "asdm image disk0:/asdm-645.bin" command in the config. I`m not sure how, because I only left the new ASDM bin image. Is there any variable or something that still points to old asdm image?
My ASA version is 8.4(2) and ASDM 6.4(5). The old one was ASA 8.2 and ASDM 6.3.
View 2 Replies
View Related
Jan 20, 2013
I've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24. I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under management i've added the VPN network of 192.168.50.0/24 to have access to ASDM, but still does not work.
View 1 Replies
View Related
Apr 10, 2012
We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server: [code]
View 1 Replies
View Related
Jan 5, 2012
How do I enable remote access to ASDM from outside of the network on the ASA 5505? This would be used for remote access to the firewall at a site that is not utilizing VPN.
View 5 Replies
View Related
Jan 9, 2013
Remote LAN pool is configured as inside. Route is proper. I am able to open 443 port from the remote LAN pool on the ASA. That means, the port is open from the remote pool. No response if I try https on the browser.
View 11 Replies
View Related
Apr 30, 2013
I have a Cisco ASA 5505 V10. I've upgraded it to use asa825-K8 & asdm-649.103. Before the upgrade I was able to get to the ASDM via https://192.168.1.1. However after the upgrade I just get a page cannot be displayed. I have rebooted the ASA.
View 4 Replies
View Related
Oct 18, 2012
My macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies
View Related
Feb 3, 2011
Today I upgraded my Cisco ASA 5505 ASDM from version 6.34 to 6.41 cause of some problems on old version with NetFlow. But now when I switch to dashboard i can not see "Top Usage" tab. That was quite usefull for me. It simply disappeared.
Can i somehow configure which tabs are displayed on dashboard ? I really need that one and I do not want to downgrade :/
View 7 Replies
View Related
Mar 13, 2013
We have an ASA 5505 and are changing ISPs so we'll be getting a new static IP address. How do I change the external IP address using ASDM? (I haven't done it in 5 years so I'm rusty and just want ot make sure.) The ASA and ASDM are up to date.Am i correct in that I only need to change the external address in the configuration under Interfaces, then under Routing - Static Routes - Gateway IP I just need to enter the new WAN gateway address?
View 2 Replies
View Related
Feb 6, 2013
I have an ASA-5505 which I have been managing using ASDM from a PC and a Mac.I just happens that the Mac has not been used in a little while and when I tried to use ASDM on it, it fails.I've had a trawl through various posts and release notes (after updating various components in the process, incl Java with all the diabling/security updates of late) but am still having the problem and this is where I'm at:
- the ASA runs v8.4(2) and ASDM 7.1(1)52
- release notes state that ASDM 7.1 should work on Java 7 on Windows 7 and MacOS 10.7
- ASDM starts fine on my Windows 7 PC running Java 1.7.0_13
- I am also running Java 1.7.0_13 on MacOS 10.7.5
- on MacOS, ASDM starts, asks for credentials, download/refreshes the cached app... and then crashes with the following exception message:
The root cause of the issue seems to be that a Java class called apple.laf.AquaTableHeaderUI is not found..Now, I don't know much about Java, but that seems to be an Apple UI related class - I presume that it would be good to use this to give ASDM a more native look and feel, but why on earth is there no fallback? or am I missing something?
View 4 Replies
View Related
Jun 17, 2012
I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
View 2 Replies
View Related
