Linksys Wireless Router :: E4200 Cannot Use The Client Name With Stock Firmware

Mar 10, 2012

I've assigned an ip address to my htpc using dhcp reservation. On my old router I could use the client name, for instance: ssh name@clientName Instead of: ssh name@ipAddress Currently I cannot do this with the stock cisco firmware (unless I'm mistaken). Is there something I have to do to get it working? Or do I have to resort to tomatoUSB/WRT.

View 1 Replies


ADVERTISEMENT

D-Link DIR-601 :: Flash To Stock Firmware From Dd-wrt?

Dec 7, 2011

I recently updated my firmware to dd-wrt... now I would like to switch back to stock firmware. I don't like the fact that any change I make basically resets the router.  Plus DD-WRT GUI is VERY slow for me?I've followed every tutorial on how to do this, but the router will not accept the stock firmware.  I've gotten the image to upload (according to the browser), but at 100% the flashing orange light & globe light just continue to blink & do nothing.  I never see the other lights "flash" confirming the upgrade has took.  I've set my IP manually through "Network Connections>Properties>TCP/IPv4" before trying.  I get to the emergency firmware page...set it upload Version A1. Sometimes it uploads...but like I said, it never takes.

View 11 Replies View Related

WNDR3700 Would Connect At 300mbps With Stock Netgear Firmware

Sep 10, 2011

I have a Netgear WNDR3700 v2 that I loaded with dd-wrt (v24-sp2 std). The only real problem that I am having is with the wireless. I can't get anything to connect at 300mbps. Even if I set it to n only it still only connects at 54mbps. Right now I am running it with encrytion off to rule out that causing any problems. and yes it would connect at 300mbps with the stock netgear firmware.

View 3 Replies View Related

Linksys Wireless Router :: Where To Get New Firmware For E4200

Apr 14, 2012

There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?

View 1 Replies View Related

D-Link DIR-655 :: Version B Running Stock 2.0 Firmware - Cannot Connect To Internet

Aug 17, 2012

I have a DIR-655 Version B running the stock 2.0 firmware and a Motorola SB6120 cable modem and my ISP is comcast. I have had comcast come out and test my line and everything is fine. I have a desktop directly wired to the internet and several portable devices accessing the router.I cannot connect to the internet. My network is available and none of my devices ever indicate the network isn't available. When I try to load a website it just says "waiting for reply..." and nothing happens. The solution that always works is rebooting both the modem and the router. What is odd is that this problem comes and goes, I will go a week with zero issues, then I go all week with rebooting my stuff 5-8 times a day..What have I tried? I tried the settings that are recommended by Furrynuts to users complaining. I have also tried changing the wireless band settings to different channels as well.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Tomato Firmware?

Jul 28, 2011

I was looking for alternative firmwares until Linksys fixes their broken device.What do you guys make of this Tomato firmware?  Do you think it has usb drive and Media Streaming (Twonky) support?

View 2 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Update E4200 Firmware

Dec 13, 2012

Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
 
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560

View 1 Replies View Related

Linksys Wireless Router :: Does It Value To Update E4200 Firmware To 1.0.03

Oct 2, 2011

I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.

View 4 Replies View Related

Linksys Wireless Router :: Download Source For E4200 V1.0.0 Firmware?

Aug 1, 2011

link to the original v1.0.0 firmware for the E4200.  That was the best firmware for me and sadly I can't find a link to go back.  v1.0.0 really had no problems for me.  I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want.  v1.0.2 broke my YouTube and Netflix streaming.  So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
 
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured.  (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Firmware 1.0.02 Blocking VPN Access?

Aug 6, 2011

I cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
 
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.

View 9 Replies View Related

Linksys Wireless Router :: E4200 V2 With Firmware 2.1.39.145204 Gets Stuck

Dec 24, 2012

I've tried to upgrade/downgrade process twice with the same result. After few days without any issue 2.1.39.145204 gets stuck (=routing to internet doesn't work although I can ping from wireless network to all LAN IPs) and I need to reboot the router.
 
I have about 7 devices. Guest network is disabled, parental control is disabled, USB is not used, DHCP service is used, WPA2 mixed personal mode is used, MAC filtering is disabled, DMZ is disabled, DDNS is disabled, port triggering is not used. All the rest of settings are in default values.
 
As far as I notied the previous version 2.1.39.144146 doesn't get stuck at all.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Running Firmware 1.0.03 Build 14?

Dec 18, 2011

I am unable to connect both of my smart phones to the access point.  I am using WPA2 encryption on the AP.  I can connect my phones to other AP's using WPA2.  I have other devices that connect to the AP except my Android phones.  I would like to be able to get some debug logs except the web interface says that the logging fictions are disabled when in bridge mode. Cisco/Linksys tech support: Any troubleshooting tips other than resetting the access point and or reflashing it.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: DHCP Client In E4200 Becoming Unreliable

Mar 20, 2013

I have ten E4200 routers deployed in five library branches.  In recent months, the E4200's in two branches have occasionally gone into a state where they are not always providing an IP address to both wired and wireless devices.  Some devices will get an IP fine and others will not,  The problem seems to move and the next day the same device will connect fine and others will not.  A reset of the router usually clears the problem but it is becoming more frequent and bothersome.  For some reason only two locations are effected.
 
Some notes:
 
- Firmware version is 1.0.02 build 13

- When I set devices up with static IP's they work fine, so the problem seems to be related to the DHCP service

- The WAN side of the network tests fine with no issues

- I've had these routers deployed for over a year and this problem just started in the past two months

- Routers and AP's are on different channels to prevent interference

- No nearby WiFi signals appear to be casuing any interference

View 3 Replies View Related

Linksys Wireless Router :: E4200 (firmware 1.0.03) Fails To Renew IP Address

Dec 1, 2011

After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch  with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.

View 6 Replies View Related

Linksys Wireless Router :: E4200 V2 Firmware 2.0.37.131047 Manual Download?

Apr 27, 2012

The device has been trying for days to auto-download and all it does is fail constantly.  Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?

View 4 Replies View Related

Linksys Wireless Router :: E4200 / Firmware 1.0.03 - Internet Speed Maximized

Oct 6, 2011

It is the router Cisco Linksys E4200.

My situation before I bought the router:
- my Internet speed is 120/20 (Mbps download / Mbps upload)
- speed test with my ISP gives 125/20 for 99% of the tests- speed test with [URL]  gives 125/20 for 99% of the tests
- I never have had a router; my PC is connected directly to the cable modem
- My ISP is Vidéotron from Quebec in Canada : [URL]

My new situation with the new router :
- last Tuesday, I bought the router Cisco Linksys E4200
- the installation  went fine and Internet works well
- during the installation process, the firmware is upgraded to 1.0.03
- speed test with my ISP gives 100/20 for 99% of the tests
- speed test with [URL] gives 100/20 for 99% of the tests 

My observations :
- according to router status port, Internet port is 1 Gbps
- according to router status port, port  1 (where my PC is connected) is 1 Gbps
- it seems that speed cannot get more than 100/20 with the new router
- when I disconnect the router and I reconnect my PC directly to the modem cable, I still get 125/20 

Calling Cisco support :
 - Many tests are done during 3 chat sessions
- The speed is still 100/20
- The recommendation is to replace the router with a new one  

Friend support :
- A friend of mine brought his router which is the same as mine- The speed is still 100/20 with his router 

New router  :
- As recommended by Cisco support, I got the router replaced from the store.
- I installed the new router
- During the installation process, the firmware is not upgraded; the firmware is 1.0.01
- The speed is now 125/20
- I upgraded the firmware to 1.0.03
- The speed is now 120/20
- I downgraded the firmware to 1.0.01
- The speed is now 125/20

Conclusion :
- My speed is maximized at 100/20 with the firmware 1.0.03
- I will stay with firmware 1.0.01 until firmware1.0.03 is corrected.

View 8 Replies View Related

Linksys Wireless Router :: E4200 - Restore Previous Version Of Firmware?

Dec 27, 2012

I have an E4200 router with 3 WET610N access points.  I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away.  Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop.  A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152.  Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.

I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2.  The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless.  This only happened since the firmware update.  And this equipment was working fine before this.  Is there a way I can restore the previous version of firmware? 

View 4 Replies View Related

Linksys Wireless Router :: E4200 With Bad Firmware Cannot Use External Storage Settings

Apr 1, 2013

This firmware bad, because my sync program, can't set create date of files on external usb storage connected to router, on 1.0.04 - all good.

View 5 Replies View Related

Linksys Wireless Router :: E4200 And Slingbox Firmware Not Connecting / Playing

Dec 9, 2011

I have a new E4200 with the latest firmware and my slingbox seems to not be playing nice with the router.  It refuses to take the IP I reserved for the SB, but always defaults to 192.168.2.254.  I use a 2 subnet just in case you're wondering.  I have tried multiple reboots and the IP does not change.  I have tried turning off UPNP, figuring that was hijacking the dhcp server, but that hasn't changed anything. I also notice that a few of my connected devices do not show up in the dhcp list, yet they connect and work ok. 

View 2 Replies View Related

Linksys Wireless Router :: E4200 And WET610N No Changes To Bridges Before Firmware Update

Feb 6, 2012

Okay so I have been using my E4200 router and WET610N bridges for a while now without any issues really until yesterday when I updated the firmware on the 4200 now none of my WET610N's (I have 2) can connect via wireless at all. At first I thought it was a a wireless issue but I have other devices that connect up just fine via wireless.I've made no changes to the router or the bridges before the firmware update.
 
If I hook the bridge directly to the router I can access it and configure it, but looking at the "Status" page, I see the bridge try and connect wirelessly but is quickly disconnected.  Range isn't an issue as in my testing the bridge was 2 feet from the router.I've update the bridges to the latest firmware and have verified a 100 times that the settings on both my router and the bridges are set correctly (when the bridges are hooked up via network card).

View 1 Replies View Related

Linksys Wireless Router :: Firmware Upgrade E4200 Can No Longer Be Accessed

Oct 18, 2012

automatic firmware upgrade my E4200 can no longer be accessed.

View 6 Replies View Related

Linksys Wireless Router :: No DHCP Client Table Showing In E4200?

Oct 29, 2011

I just purchased an E4200 router.  I have four clients on my network and they are all set up for DHCP.  I renewed their IPs and they all are connected.  "Cisco Connect" reports that I have four clients connected.  When I access the router and bring up the DHCP Client Table, there are no entries.  There should be four entries.  Aftern I enable the logging function, none of the logs have any data in them even after I wait for 45 minutes and use the internet and renew IPs.   I am using Firmware Version: 1.0.03.  I have the same results for both Chrome and Firefox. I want to be able to set Static IPs but I am hampered by the not having any clients in the DHCP client table.

View 9 Replies View Related

Linksys Wireless Router :: Choppy Video Streaming After Upgrading E4200 Firmware

Jan 2, 2012

Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

View 3 Replies View Related

Linksys Wireless Router :: E4200 IPv6 Causes Win7 DHCP Client Crash?

Jun 9, 2012

When I enable IPv6 on my E4200, the Windows 7 DHCP client crashes. It also seems to crash the audio service, the event logger and a few other windows services.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wireless Client Drop On Transferring Data

Dec 14, 2011

I have had an e4200 for about a month now and its been pretty good.  But I have noticed that it completely locks up when I go to copy mass amounts of data through it.    I have a NAS drive plugged into it and my laptop is on the 2.4 spectrum.  I went to transfer 8gigs of data from laptop to NAS drive and the entire wireless portion of the router locks up.  All my wireless clients drop and I have to unplug the router and plug it back in.    Even the 5ghz clients drop as well.  I have not tried hardwire, but the main reason I got this was for its throughput.

View 1 Replies View Related

Linksys Wireless Router :: E4200 DCHP Client Table Doesn't Reset After Soft Reboot

Jul 15, 2011

One of the many things that I liked about the e4200 over my olg 54GL was the fact that I could reboot it remotely.   However, I've recently had a few problems that only a full power down would fix.   In addition, I've noticed that the DCHP client table doesn't reset when I do a soft reboot.   Is this intentional?   Is the soft reboot not really a full reboot? Can it be made a real reboot?

View 7 Replies View Related

Linksys Wireless Router :: Intel 4965agn Client With E4200 - Good Connection / Transfer Rate?

Jul 30, 2011

Which Intel network cards runs well with E4200 (latest FW)?  I mean good connection and transfers rate.  I have two clients with the same cards (Intel 4965agn, latest driver) and I got transfer rates at 144 Mbps with both radios working (2.4 and 5GHZ on the E4200). When I try to use 5Ghz only it drops to 54 Mbps and for 2.4Ghz it drops for 130 Mbps. Could I reach better transfers rate with a Intel 4965agn card (300 or 450 Mbps)?

View 4 Replies View Related

Protocols / Routing :: Can't Type Stock FIOS Router Actiontec MI424WR Password?

May 15, 2011

I'm using a stock FIOS router Actiontec MI424WR, and I'm trying to access the router settings at 192.168.1.1. I type in my username fine, but when I type the password, each keystroke gives me more than one digit. Even holding Ctrl adds one, and letting go removes three characters. I've never seen this happen before, and I've tried it on two computers and three different browsers. I see that people recommend hard-resetting the router, but I was wondering why this has happened

View 3 Replies View Related

Cisco Wireless :: 2602 - What AP To Stock For Doing Site Surveys

Apr 3, 2013

Instead of stocking every known AP and every external connector, I would like to query which APs to stock for general site surveys....
 
I have 2 customers that will require surveys in the near future...one plans on using the 2602e AP, and the other a 3602e AP. I have read somewhere that the 1140 makes an excellent proxy for the 2602 and several other Cisco APs (as the RF characteristics are similar) so that I only have to stock that one AP to use for those site surveys-  but I haven't seen any recommendations about the 3600 series AP yet...
 
What AP to stock for doing Cisco site surveys? Maybe one or two models only?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved