Linksys Wireless Router :: E4200 And WET610N No Changes To Bridges Before Firmware Update
Feb 6, 2012
Okay so I have been using my E4200 router and WET610N bridges for a while now without any issues really until yesterday when I updated the firmware on the 4200 now none of my WET610N's (I have 2) can connect via wireless at all. At first I thought it was a a wireless issue but I have other devices that connect up just fine via wireless.I've made no changes to the router or the bridges before the firmware update.
If I hook the bridge directly to the router I can access it and configure it, but looking at the "Status" page, I see the bridge try and connect wirelessly but is quickly disconnected. Range isn't an issue as in my testing the bridge was 2 feet from the router.I've update the bridges to the latest firmware and have verified a 100 times that the settings on both my router and the bridges are set correctly (when the bridges are hooked up via network card).
View 1 Replies
ADVERTISEMENT
Apr 28, 2012
After I updated my E4200 V1 with the 1.0.04 update I am unable to connect my WET610N to it with 802.11N. I can connect fine with 802.11G. I tried the Site Survey method of pairing them as well as manual. When it fails it goes through the minute timeout of trying and then Link Status is disconnected. I have anything from phones to laptops connect to the E4200 with wireless N, its just the WET610N that doesnt want to pair.
Before I was running the following:
E4200 V1 1.0.03
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11N
After I was running:
E4200 V1 1.0.04
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11G
View 2 Replies
View Related
Dec 13, 2012
Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
View 1 Replies
View Related
Oct 2, 2011
I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.
View 4 Replies
View Related
Jul 7, 2011
I'm moving into a new house. I've purchased the E4200 and the WET610N so I can connect between the main house and the carriage house which will be my office. Carriage house is 60' away from the main house. I want to place the E4200 in the main house and will send it the broadband cable signal from the cable modem. I'll wire ethernet directly from the E4200 to the DVR for DirecTV and will use another output to distribute to other computers in the main house via ethernet switch. I will place the WET610N in the carriage house and want to take to output from the WET610N into wired ethernet switch(es) there for access to the broadband from the house.
View 9 Replies
View Related
Jan 11, 2012
I have 2 Media Bridges, a Trendnet TEW-640MB and TrendNet TEW-680MB. Both are set as a Static IP on the devices 192.168.1.150 and 192.168.1.151. In the DHCP table for my E4200 I don't see those. I have no problem accessing them typing in those IP addresses but wondering why they don't show up in the table.Actually looking at it more closely, the devices hooked up that are active seem to show up.So I see the following below. And where is list LAN but no name those seem to be devices connected to the media bridges.
LAN192.168.1.128 LAN192.168.1.129 iPhoneWireless192.168.1.130 1 Wireless192.168.1.131 LAN192.168.1.135
View 2 Replies
View Related
Jan 3, 2013
Trying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies
View Related
Mar 17, 2009
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
View 9 Replies
View Related
Jan 1, 2012
I go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.
View 1 Replies
View Related
Sep 22, 2011
I found this router still in box and am now using it. I want to update the firmware because i am having issues with it. it has what i assume is the original Firmware 1.00.1. The downloads for this router are no longer available. Why?
View 1 Replies
View Related
Apr 4, 2013
an EA6500 router that has intermmitent connectivity issues. Went into the configuration page and saw he was a couple versions behind on firmware. Used the online update option, firmware downloaded and then indicated that router would reboot. Did not power off router or leave the configuration web page. Watched light go out on router and come back on, but the spinning wait icon never went away after 5 minutes. Powered off and on and was back at the same point with the old firmware still. Downloaded the firmware to local drive and applied from local file, but same results. Waited 10 minutes this time. Surely it doesn't take more than 10 minutes for the router to reboot itself from a firmware flash?
Gave up on trying to update firmware and configured wifi settings. Left friend's house and then got a message about 15 minutes later that the router had locked up again. If he pulls power for 2 minutes it will then work for another short period of time.
Is there anything that can be done to try and restore normal operation to this particular router, or are these all signs of a hardware failure and the unit should just be replaced?
View 8 Replies
View Related
Jul 10, 2009
Just got a WRT120N and went online to get the most recent firmware and when i performed the upgrade it's gets about 3/4 of the way completed before it just stalls and start screen blinking like it's caught up or something. I using a modem, wrt120n router connection with a Brand New Sony Vaio laptop. I was able to upgrade my old WRT54G V5 router but can't seem to get the new router to update.
View 7 Replies
View Related
Apr 15, 2012
I've got an older SRX200 that is starting to "disconnect" frequently (loss of wireless connectivity). I've gone to the Linksys website to download a firmware update, as a potential fix, but the website says no firmware is available. The current version I'm using is 1.01.18.
View 1 Replies
View Related
May 2, 2012
I have a Linksys E1000 with Firmware Version: 2.1.02 I am having a very hard time searching to see if there is a newer Firmware Version out for this model. If there is any new Firmware update?
View 4 Replies
View Related
Jan 17, 2012
Why is there no update for the WRT54GX2 firmware?
View 1 Replies
View Related
Sep 30, 2012
Recently, the wrt310nv2-cc mostly got lost in wireless connection, so I would like to update the firmware, but I download the latest firmware, it could not flashed, which version should I use?
View 6 Replies
View Related
Feb 9, 2012
I have WRT54GCv3 wireless router... i want to update firmware but i dont find any firmare for my router version?
View 1 Replies
View Related
Jan 25, 2012
I upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened.
View 1 Replies
View Related
Jul 24, 2011
I recently updated the firmware to 1.0.02 on my E4200 and since then it's been rebooting randomly about once a day. It was working perfectly fine before the firmware update.
View 5 Replies
View Related
Jul 16, 2007
Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies
View Related
Sep 28, 2011
I've tried downloading the binary file and on both a mac and pc and it's not working. On the mac it looks like a normal zip file but when I click to "unzip" it it just creates another zip file. When I download it on a pc it doesn't even look like a zip it's just a blank white square. Both computers have always downloaded zips fine, so I'm thinking it maybe is a problem with the file?
View 3 Replies
View Related
May 23, 2012
I recently updated the firmware in my WRT160N V3.Ever since, the wireless signal is intermittent.It worked all day yesterday, and now today it doesn't connect at all.I can't remember exactly the settings I used to have before updating the firmware, should have written them down.From looking at articles on this site, I have the following settings:
MTU Manual 1492
MAC Adress enabled
Network Mode: Mixed
Channel Width 20MHz
Channel: 11
[code].....
View 3 Replies
View Related
Jul 26, 2011
The firmware update will not download?
View 1 Replies
View Related
Nov 8, 2012
I just purchased 3 E4200v2 routers. As I am prepping them to install, I am attempting to update the firmware from 2.0.26 -> 2.0.37. I downloaded the zip file from the Cisco support site and when unzipped the file is named FW_E4200_2.0.37.131047.SSA. When I attempt to do a manual update from the Admin page, I imediately get an image file is incorrect error.
I've downloaded the file a total of three times on 2 separate networks and have tried three different browsers to attempt the update, all with the same error. The support chat sessions have proven worthless, they seem very scripted and the last one kept trying to sell me a support contract...
I want to stay with the Classic firmware, even though it is lacking current bug fixes. Does anyone have a "good" copy of the 131047 firmware? It appears to me that the one on the Cisco site is broken.
View 2 Replies
View Related
Oct 26, 2011
I have been having numerous issues with my router dropping both my wired and wireless connection multiple times an hour. I checked the Cisco website for the firmware update and it says the download is no longer available. I am on firmware 1.02.06. Does someone have a newer version? I'm hoping a firmware update will resolve this issue.
View 1 Replies
View Related
Nov 8, 2007
I am needing to update the firmware for my router. befw1154 version 4. I went to the download section of the linksys website, and it does show that there is an update there, but I have read in alot of places that the update downloads are in a zip file. WEll it definately wasnt in a zip file, and all it did was download a strange file and there was nothing to install or anything. My router is still on the blitz, and going down every few minutes and I am having to restart just to have it go down again. firmware update for this router?
View 1 Replies
View Related
Nov 1, 2011
I have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
View 8 Replies
View Related
Jan 5, 2012
I have been having trouble with my router with wireless network intermittently cutting out every couple minutes (on all devices, like laptop, phone, and tablet.) So, in my wisdom, I went online and downloaded version 2 firmware and after power cycling the wireless doesn't work anymore. Questions:
I have my old Dell Desktop connected (hardwired) into the router, and it works when I take the wireless router out of the loop. How do I update the firmware on the router if I can't connect wirelessly or hardwire anymore? I want to go to version 1 to see if that will solve the original issue.
For the original issue of cutting out and reconnecting constantly, would version 1 work or something else? It isn't my cable modem, as internet has always worked fine connecting desktop or laptop directly.
View 2 Replies
View Related
Nov 19, 2011
I currently have a WRT54GS ver 1.0 running firmware version v2.07.1Ran through the whole installation procress as described in the firmware upgrade instructions pdf and it said Successful and hit continue. Hit continue, held the reset button down for 10 seconds then powered off the router for 30 seconds and plugged it back in.My firmware version in the router is still saying v2.07.1, I would assume it should say 4.21.4?
View 8 Replies
View Related
Jun 28, 2006
I upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened
View 7 Replies
View Related
Jun 2, 2012
I have upgrade firmware of E1500 to latest release to version 1.0.04 and found out bad performance of the router QoS.
View 6 Replies
View Related
Sep 20, 2011
I have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:
Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.
View 3 Replies
View Related
Sep 23, 2009
Trying to update my firmware 1.00.01 B15 to 1.00.01 B17. I downloaded the firmware to my desktop (using mac os X 10.5.5) and connected my computer directly to port 1 on the back of the router. I used the Firmware upgrade tool under the Administration tab to upload the new firmware file. The update progress starts but fails at 98%
View 4 Replies
View Related
