Linksys Wireless Router :: E4200 Tomato Firmware?

Jul 28, 2011

I was looking for alternative firmwares until Linksys fixes their broken device.What do you guys make of this Tomato firmware?  Do you think it has usb drive and Media Streaming (Twonky) support?

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: Where To Get New Firmware For E4200

Apr 14, 2012

There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?

View 1 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Update E4200 Firmware

Dec 13, 2012

Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
 
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560

View 1 Replies View Related

Linksys Wireless Router :: Does It Value To Update E4200 Firmware To 1.0.03

Oct 2, 2011

I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.

View 4 Replies View Related

Linksys Wireless Router :: Download Source For E4200 V1.0.0 Firmware?

Aug 1, 2011

link to the original v1.0.0 firmware for the E4200.  That was the best firmware for me and sadly I can't find a link to go back.  v1.0.0 really had no problems for me.  I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want.  v1.0.2 broke my YouTube and Netflix streaming.  So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
 
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured.  (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Firmware 1.0.02 Blocking VPN Access?

Aug 6, 2011

I cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
 
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.

View 9 Replies View Related

Linksys Wireless Router :: E4200 V2 With Firmware 2.1.39.145204 Gets Stuck

Dec 24, 2012

I've tried to upgrade/downgrade process twice with the same result. After few days without any issue 2.1.39.145204 gets stuck (=routing to internet doesn't work although I can ping from wireless network to all LAN IPs) and I need to reboot the router.
 
I have about 7 devices. Guest network is disabled, parental control is disabled, USB is not used, DHCP service is used, WPA2 mixed personal mode is used, MAC filtering is disabled, DMZ is disabled, DDNS is disabled, port triggering is not used. All the rest of settings are in default values.
 
As far as I notied the previous version 2.1.39.144146 doesn't get stuck at all.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Running Firmware 1.0.03 Build 14?

Dec 18, 2011

I am unable to connect both of my smart phones to the access point.  I am using WPA2 encryption on the AP.  I can connect my phones to other AP's using WPA2.  I have other devices that connect to the AP except my Android phones.  I would like to be able to get some debug logs except the web interface says that the logging fictions are disabled when in bridge mode. Cisco/Linksys tech support: Any troubleshooting tips other than resetting the access point and or reflashing it.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Cannot Use The Client Name With Stock Firmware

Mar 10, 2012

I've assigned an ip address to my htpc using dhcp reservation. On my old router I could use the client name, for instance: ssh name@clientName Instead of: ssh name@ipAddress Currently I cannot do this with the stock cisco firmware (unless I'm mistaken). Is there something I have to do to get it working? Or do I have to resort to tomatoUSB/WRT.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: E4200 (firmware 1.0.03) Fails To Renew IP Address

Dec 1, 2011

After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch  with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.

View 6 Replies View Related

Linksys Wireless Router :: E4200 V2 Firmware 2.0.37.131047 Manual Download?

Apr 27, 2012

The device has been trying for days to auto-download and all it does is fail constantly.  Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?

View 4 Replies View Related

Linksys Wireless Router :: E4200 / Firmware 1.0.03 - Internet Speed Maximized

Oct 6, 2011

It is the router Cisco Linksys E4200.

My situation before I bought the router:
- my Internet speed is 120/20 (Mbps download / Mbps upload)
- speed test with my ISP gives 125/20 for 99% of the tests- speed test with [URL]  gives 125/20 for 99% of the tests
- I never have had a router; my PC is connected directly to the cable modem
- My ISP is Vidéotron from Quebec in Canada : [URL]

My new situation with the new router :
- last Tuesday, I bought the router Cisco Linksys E4200
- the installation  went fine and Internet works well
- during the installation process, the firmware is upgraded to 1.0.03
- speed test with my ISP gives 100/20 for 99% of the tests
- speed test with [URL] gives 100/20 for 99% of the tests 

My observations :
- according to router status port, Internet port is 1 Gbps
- according to router status port, port  1 (where my PC is connected) is 1 Gbps
- it seems that speed cannot get more than 100/20 with the new router
- when I disconnect the router and I reconnect my PC directly to the modem cable, I still get 125/20 

Calling Cisco support :
 - Many tests are done during 3 chat sessions
- The speed is still 100/20
- The recommendation is to replace the router with a new one  

Friend support :
- A friend of mine brought his router which is the same as mine- The speed is still 100/20 with his router 

New router  :
- As recommended by Cisco support, I got the router replaced from the store.
- I installed the new router
- During the installation process, the firmware is not upgraded; the firmware is 1.0.01
- The speed is now 125/20
- I upgraded the firmware to 1.0.03
- The speed is now 120/20
- I downgraded the firmware to 1.0.01
- The speed is now 125/20

Conclusion :
- My speed is maximized at 100/20 with the firmware 1.0.03
- I will stay with firmware 1.0.01 until firmware1.0.03 is corrected.

View 8 Replies View Related

Linksys Wireless Router :: E4200 - Restore Previous Version Of Firmware?

Dec 27, 2012

I have an E4200 router with 3 WET610N access points.  I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away.  Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop.  A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152.  Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.

I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2.  The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless.  This only happened since the firmware update.  And this equipment was working fine before this.  Is there a way I can restore the previous version of firmware? 

View 4 Replies View Related

Linksys Wireless Router :: E4200 With Bad Firmware Cannot Use External Storage Settings

Apr 1, 2013

This firmware bad, because my sync program, can't set create date of files on external usb storage connected to router, on 1.0.04 - all good.

View 5 Replies View Related

Linksys Wireless Router :: E4200 And Slingbox Firmware Not Connecting / Playing

Dec 9, 2011

I have a new E4200 with the latest firmware and my slingbox seems to not be playing nice with the router.  It refuses to take the IP I reserved for the SB, but always defaults to 192.168.2.254.  I use a 2 subnet just in case you're wondering.  I have tried multiple reboots and the IP does not change.  I have tried turning off UPNP, figuring that was hijacking the dhcp server, but that hasn't changed anything. I also notice that a few of my connected devices do not show up in the dhcp list, yet they connect and work ok. 

View 2 Replies View Related

Linksys Wireless Router :: E4200 And WET610N No Changes To Bridges Before Firmware Update

Feb 6, 2012

Okay so I have been using my E4200 router and WET610N bridges for a while now without any issues really until yesterday when I updated the firmware on the 4200 now none of my WET610N's (I have 2) can connect via wireless at all. At first I thought it was a a wireless issue but I have other devices that connect up just fine via wireless.I've made no changes to the router or the bridges before the firmware update.
 
If I hook the bridge directly to the router I can access it and configure it, but looking at the "Status" page, I see the bridge try and connect wirelessly but is quickly disconnected.  Range isn't an issue as in my testing the bridge was 2 feet from the router.I've update the bridges to the latest firmware and have verified a 100 times that the settings on both my router and the bridges are set correctly (when the bridges are hooked up via network card).

View 1 Replies View Related

Linksys Wireless Router :: Firmware Upgrade E4200 Can No Longer Be Accessed

Oct 18, 2012

automatic firmware upgrade my E4200 can no longer be accessed.

View 6 Replies View Related

Linksys Wireless Router :: Choppy Video Streaming After Upgrading E4200 Firmware

Jan 2, 2012

Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

View 3 Replies View Related

Will Tomato Retain All Current Settings On Router

Jan 22, 2012

Will Tomato retain all current settings on my router, or will I have to set it up again from scratch? If from scratch, is there an easier way to ensuring I get all my custom configurations, then from going screen to screen and writing it down? I do periodically back up the config - will Tomato recognize that file?

View 2 Replies View Related

Netgear 4000 - How To Connect Two Router One Running Tomato

Jan 4, 2012

I have the Netgear 4000 as primary router and I want to connect my second router WRT54GL running tomato firmware to my network.

View 2 Replies View Related

WHR HP G54 / WRT 54GL - Extending Wireless With Tomato Routers

Jun 21, 2011

Currently I have a Buffalo WHR-HP-G54 wireless router running tomato 1.28. The router sits in the basement in the front corner of the house. The signal is actually very good from the basement, but only on the side of the house where the router is sitting.

Is it possible to add a second router to extend the wireless? I would want to have the second router connected via Cat6 instead of wireless. I would probably go with a WRT54GL.

View 5 Replies View Related

WRT160N V3 / Computer No Longer Connecting Wirelessly To Router After Tomato Clean Install

Jul 13, 2013

I just installed Tomato firmware (details below) on my wireless-N router and everything appears to be working fine on the router's end. I can connect to the Internet properly with a wired (Ethernet) connection; in fact, that's how I posted this question.

What I cannot do is connect to the router wirelessly in any way. At first, I thought that something was wrong with my wireless security settings, because I read about some incompatibilities between Windows 7 and AES encryption. However, when I changed to TKIP, the issue persisted; when I switched from WPA2 Personal to WEP, the issue persisted; and when I disabled wireless security entirely — just for testing purposes — the issue still persisted.

My Internet search for this issue brought up a lot of old forum and mailing list posts, most of which were useless. The only one that seemed promising suggested disabling Afterburner, but that came disabled by default on my install. I did try enabling it and then disabling it, but it had no apparent effect.

In case it's relevant: before I installed Tomato, I had a somewhat funky install of dd-wrt on the router. The first thing I did after installing Tomato was a full clean of the nvram through the web GUI's Administration → Configuration → Restore Default Configuration menu.

What do I have to do to get wireless running? I only have one computer available at the moment, but I'll try to update later if and when I can borrow more devices for testing.

Assorted specs:

Linksys WRT160N v3
Tomato Firmware v1.28.9054 MIPSR2-beta K26 Mini
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates

EDIT:This is a computer issue, not a router issue. Two smartphones with wi-fi connections and another computer are all able to connect to the wireless network with no problems. However, the original computer was able to connect to the same router just fine before Tomato was installed. It has an internal wireless-B/G card, and I had Tomato set up to broadcast G-only, so it should have been compatible.

EDIT 2:The computer in question was the only device in the house that wasn't set up for wireless-N, so I went out and bought a Wireless-N USB adapter and changed Tomato to be N-only. Using the new adapter, I get connection again. I suppose it's possible that the computer's OEM internal wireless card failed at exactly the same time that I installed Tomato on the router, but that would be one heck of a coincidence. I'll see if I can connect to some other G or B network next time I'm around one....

View 1 Replies View Related

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Router :: What Is The Best Firmware For BEFW11S4

Apr 10, 2013

I want to know what is the best firmware for BEFW11S4.

View 1 Replies View Related

Linksys Wireless Router :: No Firmware For WRT160NL?

Mar 4, 2012

Firmware is not available for WRT160NL in this site. Only Setup Wizard and Firmware Upgrade Instructions are available.

View 1 Replies View Related

Linksys Wireless Router :: Firmware For E1200 V2

Dec 29, 2012

i'm having connection issues requiring frequent reboots of my router. it starts with internet slowdown to a crawl, then it times out and lastly the webinterface is not even responding when i try to access it to reboot. Requiring me to manually unplug. this happens once a day atleast.
 
Sometimes it recovers after a few minutes and get on the net.i've tried flashing, reflashing, re-reflashing , resetting , re-resetting, to no end. And all the usual tricks tech support ask to do.
 
i didn't use to have this problem before the firmware update
08/31/2012
Ver.2.0.04 (Build 1)
 
i would just like to flash to the previousl version and test if this still happens.

View 9 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved