Linksys Wireless Router :: E4200 - Restore Previous Version Of Firmware?

Dec 27, 2012

I have an E4200 router with 3 WET610N access points.  I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away.  Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop.  A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152.  Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.

I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2.  The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless.  This only happened since the firmware update.  And this equipment was working fine before this.  Is there a way I can restore the previous version of firmware? 

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: Find Previous Versions Of WRT120N Firmware?

Feb 18, 2012

I have a problem with current (1.0.06) firmware on WRT120N. Few hours after restart DHCP server stops assigning IP addresses. Another restart resolves problem, but only for next few hours.Computers and other devices "see" my wireless network and they are able to connect to it, but the process stops at requesting IP number.There was no such effect with original firmware (although there was another problem with 2200BG), so I want to downgrade.where can I find previous versions of WRT120N firmware?

View 2 Replies View Related

Restore PC To A Previous Date?

Jan 3, 2012

I am trying to restore my pc to a previous date but the calendar that displays will not go back to December - it is stuck on January.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Hangs - Restore Original Firmware In Case Update Fails?

Jun 16, 2008

I purchased a WRT160N router last Friday. After setting it up, everything seemed to work fine, but after a couple of hours, the router stopped responding to any requests. The LEDs stayed on as if nothing had happened, but the router was dropping everything coming from both the WAN and a wired LAN interface. Since than, I had to restart it 3 times during the last 3 days.The firmware is 1.53.0, which seems to be the latest firmware for the European market - even when I try to get a newer firmware, this site only offers the US version 1.02.2.Should I update the firmware to the US version 1.02.2 ? Is there any difference between the 1.53.0 and the 1.02.2 version ? Is there a way to restore the original firmware in case the update fails ? I haven't found any link to 1.53.0 version..Also, does this firmware updating affect my warranty ?

View 9 Replies View Related

Linksys Wireless Router :: Right Firmware For WRT54G Version 2?

Feb 10, 2012

I need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?

View 2 Replies View Related

Linksys Wireless Router :: Firmware Version For WRT160N?

Jan 25, 2013

Looking into a firmware upgrade. I have a WRT160N. The label on the back, next to Model Number, simply says WRT160N with no version number. I therefore conclude, per info on the Cisco site, that it is a V1 model, not V2 or V3. And yet the Admin web page for the router says firmware version is 3.0.02. I'm pretty confident I have never upgraded firmware on this router, which means this is how it came out of the box long ago. Latest firmware for V1 is 1.02.11; latest firmware for V3 is 3.0.03.
 
Should I upgrade to 3.0.03? Is there a way to downgrade to 1.02.11? I'm having some minor issues whch may or may not be the ruter's fault, I figure a firmware upgrade (downgrade?) will at least rule out router firmware issues.

View 5 Replies View Related

Linksys Wireless Router :: WRT54GC Version 2.0 Firmware Update?

Jul 16, 2007

Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)

View 9 Replies View Related

Linksys Wireless Router :: Original Firmware For WRT54GL Version 1.1?

May 30, 2007

It appears that there is no firmware I can download for my WRT54GL Version 1.1. While it may never have been updated from what the router came with from the factory, it would still be useful to have it available. In my case, I would like to revert the router from the DD-WRT firmware to factory specs.

View 3 Replies View Related

Linksys Wireless Router :: Befw1154 Version 4 Firmware Update?

Nov 8, 2007

I am needing to update the firmware for my router. befw1154 version 4. I went to the download section of the linksys website, and it does show that there is an update there, but I have read in alot of places that the update downloads are in a zip file. WEll it definately wasnt in a zip file, and all it did was download a strange file and there was nothing to install or anything. My router is still on the blitz, and going down every few minutes and I am having to restart just to have it go down again. firmware update for this router?

View 1 Replies View Related

Linksys Wireless Router :: What Is Latest Firmware Version For WRT160n

Jan 20, 2013

what is latest firmware version is for router WRT 160n (v1). The Linksys site currently states that it is Ver.1.02.11 (11/08/10). However, on the admin page for my actual router it states v1.52.0 Nov 16, 2007.  These versions #s and dates don't jive. How could I have a supposedly newer version that is older than the most recent one posted? 

View 3 Replies View Related

Linksys Wireless Router :: E4200 Version And Guest Access?

Aug 26, 2012

My serial number on the E4200 starts with 01 - does that indicate it is a version 1? If not, how do I determine which version I have? Are there any software updates available? How do I disable my guest access?

View 1 Replies View Related

Linksys Wireless Router :: BEFW11S4 (Firmware Version 1.50) Not Connecting To Internet

Aug 2, 2012

I am trying to assist my sister with her BEFW11S4 Wireless Router.  It has been working fine until this week!  The Firmwre is version 1.50.  The  main router is not connecting to the internet, yet the 2 wireless adapters for their other 2 computers are!  It shows that the main one has a connection but when you bring up any Internet Browser it says it can't find the connection.  We've checked the settings and they are all correct. We even turned the firewall off and that didn't work! 

View 1 Replies View Related

Linksys Wireless Router :: Running Firmware Version 1.1.28.14856 On EA6500

Mar 13, 2013

I'm running firmware version 1.1.28.14856 on EA6500 series.

View 4 Replies View Related

Linksys Wireless Router :: E1200 Will Support The Upgrade Version 2 Firmware

Jan 15, 2013

I have a Cisco E1200 router that is currently running firmware version 1.0.03 build4 Mar 1, 2012. Can I upgrade to the latest version 2 firmware ? How do I know if my router hardware will support it ? 

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Version V7.00.7 Beta Update?

Aug 11, 2012

I have a EMEA wireless router WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't seem to find an update for the firmware on the site.

View 2 Replies View Related

Linksys Wireless Router :: E4200 V2 - Find Hardware Version Number?

Nov 28, 2012

In January 2012 I bought a Linksys E4200v2. I am trying to download a firmware version upgrade and it wants to know what hardware version I have. The top of my router (where the model number is displayed), only has E4200. I have looked through my receipts, the box it came in, and anything else I can find to do with the router - they all have the E4200v2. In case the 'v2' portion is for the hardware version, I do not want to download the wrong firmware version and end up with a router that doesn't work

View 4 Replies View Related

Linksys Wireless Router :: Latest Version Of Safari Corrupt GUI E4200

Mar 28, 2012

All of a sudden, my GUI look like this I'm using the latest version of Safari on a MacBook and FW 1.0.04 on the E4200.When I click on one of the menu items the only thing I get is "404 File not found".

View 3 Replies View Related

Linksys Wireless Router :: Where To Find Lastest Version Official Firmware For WRT610n V2

Nov 6, 2011

Where can i find the lastest version official firmware for my WRT610n V2?

View 9 Replies View Related

Linksys Wireless Router :: Where To Get New Firmware For E4200

Apr 14, 2012

There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Version 1 - Terminate PPPoE On Really High Speed Connection

Jan 17, 2013

Used an E4200 version 1 to terminate PPPoE on a really high speed connection? By that I'm talking say 400Mb or higher.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Tomato Firmware?

Jul 28, 2011

I was looking for alternative firmwares until Linksys fixes their broken device.What do you guys make of this Tomato firmware?  Do you think it has usb drive and Media Streaming (Twonky) support?

View 2 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
 
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Update E4200 Firmware

Dec 13, 2012

Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
 
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560

View 1 Replies View Related

Linksys Wireless Router :: Does It Value To Update E4200 Firmware To 1.0.03

Oct 2, 2011

I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.

View 4 Replies View Related

Linksys Wireless Router :: Download Source For E4200 V1.0.0 Firmware?

Aug 1, 2011

link to the original v1.0.0 firmware for the E4200.  That was the best firmware for me and sadly I can't find a link to go back.  v1.0.0 really had no problems for me.  I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want.  v1.0.2 broke my YouTube and Netflix streaming.  So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
 
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured.  (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)

View 9 Replies View Related

Linksys Wireless Router ::E4200 - Why Firmware Can Only Set 5Ghz Broadcast

Dec 30, 2011

I had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Firmware 1.0.02 Blocking VPN Access?

Aug 6, 2011

I cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
 
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.

View 9 Replies View Related

Linksys Wireless Router :: E4200 V2 With Firmware 2.1.39.145204 Gets Stuck

Dec 24, 2012

I've tried to upgrade/downgrade process twice with the same result. After few days without any issue 2.1.39.145204 gets stuck (=routing to internet doesn't work although I can ping from wireless network to all LAN IPs) and I need to reboot the router.
 
I have about 7 devices. Guest network is disabled, parental control is disabled, USB is not used, DHCP service is used, WPA2 mixed personal mode is used, MAC filtering is disabled, DMZ is disabled, DDNS is disabled, port triggering is not used. All the rest of settings are in default values.
 
As far as I notied the previous version 2.1.39.144146 doesn't get stuck at all.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Running Firmware 1.0.03 Build 14?

Dec 18, 2011

I am unable to connect both of my smart phones to the access point.  I am using WPA2 encryption on the AP.  I can connect my phones to other AP's using WPA2.  I have other devices that connect to the AP except my Android phones.  I would like to be able to get some debug logs except the web interface says that the logging fictions are disabled when in bridge mode. Cisco/Linksys tech support: Any troubleshooting tips other than resetting the access point and or reflashing it.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Cannot Use The Client Name With Stock Firmware

Mar 10, 2012

I've assigned an ip address to my htpc using dhcp reservation. On my old router I could use the client name, for instance: ssh name@clientName Instead of: ssh name@ipAddress Currently I cannot do this with the stock cisco firmware (unless I'm mistaken). Is there something I have to do to get it working? Or do I have to resort to tomatoUSB/WRT.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: E4200 (firmware 1.0.03) Fails To Renew IP Address

Dec 1, 2011

After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch  with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved