D-Link DIR-615 :: Not Running And No Internet Access
Nov 8, 2012
I'm not able to get my DIR-615 running... that's the case:Cable Modem works fine with Internet Access - LAN Cable to my Windows Laptop.Bought a new D-Link DIR-615 and plugged the LAN Cable from the Cable Modem to the "Internet" Port on the 615. Second LAN cable from Port 1 to my laptop for config of the WLAN SSID and WPA2. Unplugged it and here we go, I can access the 615 via WLan Connection. But... I have no Internet Access over Lan or WLan. The 615 gives me options to setup Internet with the cable/ISP information. But this is done by my cable modem, isn't it ? What do I have to do to get it running? enabled and disabled DHCP, made Reset, latest Firmware 8.02 is installed (out of the box).
I have a DIR-655 Version B running the stock 2.0 firmware and a Motorola SB6120 cable modem and my ISP is comcast. I have had comcast come out and test my line and everything is fine. I have a desktop directly wired to the internet and several portable devices accessing the router.I cannot connect to the internet. My network is available and none of my devices ever indicate the network isn't available. When I try to load a website it just says "waiting for reply..." and nothing happens. The solution that always works is rebooting both the modem and the router. What is odd is that this problem comes and goes, I will go a week with zero issues, then I go all week with rebooting my stuff 5-8 times a day..What have I tried? I tried the settings that are recommended by Furrynuts to users complaining. I have also tried changing the wireless band settings to different channels as well.
I am now unable to access the internet with my Dell 560 running windows7. I have Verizon Fios for internet access. Windows network diagnostics reports that the connection between my access point,router or cable modem and the internet is broken and the network gateway is accessible but windows could not receive network traffic from the internet. Verizon's in-house -agent reports that there seems a connection problem between my router and the wall jack. I am able to access the internet with another computer and the the same router. I also have no problems with my iPad. I have interchanged cables and ports on the router.
I bought my laptop 4 weeks ago. It has Windows 8 on it. It worked great until this week. At first, Google Chrome quit working. Then IE quit. I connect wirelessly. It says it is strong, but no Internet access. I do have connectivity on my phone to that router.
We have ASA 5540. We setup Site-to-Site VPN and Remote Access VPN (Cisco VPN client). If are running full tunnel on the Cisco VPN client, the internet access is slow. For example, when we are running full-tunnel, the internet speed is 16 Mbps based on Speedtest.net. When we go to Speedtest.net, some of the graphics do not load. If we are running Split-tunnel, the internet access speed is 78 Mbps based on Speedtest.net and the Speedtest.net web site loads all the graphics.
Region : UnitedStates Model : TL-WR740N Hardware Version : V4 Firmware Version : 3.1 ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
But my wireless set up does not work. At all. I have a DIR-655 (obviously) linked to a DWA-130. I tried multiple configurations but STILL only get less than 1Mbps download speed.
I have a DIR-615 router that I can not see the characters that you have to type just a read X on login screen on any computer running IE9 even the emulator on the dlink site shows this problem.
My DIR-655 keeps rebooting multiple times per day. Something in the order of 10-15 times per day. This is not under any heavy load. It's plugged into a decent battery backup providing good clean power. I initially thought its overheating, so I had a fan blow on it all day long, without any change in the issue.
I loved this router when it was working correctly (3+ years). Any way to figure out the cause for the reboot?
I currently have frontier dsl internet and am using the isp provided modem/router combo and a DIR-655. I have the modem running in bridge mode and the 655 set to PPPoe connection, MTU at 1492. I confirmed the MTU setting on the isp modem/router before bridging it. The question i have is if the router MTU is set to 1492 does everything on the LAN side of the router run at 1492 or does it run at 1500 while the router breaks the packets up? Everything works fine but my pc's all use vista and i'm not sure where to check the mtu settings at and all my game consoles are set to mtu automatic so i can't really see what they're running at either.
About 3 months ago i bought myself a D-Link 615 Router, thinking that i needed one for the time being,and when i was gonna go to college (wich is now) i'm still gonna need one.Worked like a charm for about a month.Then i left for college, and didn't need the router for like 4 weeks.Now i REALLY need the router and it doesn't work... The little globe light is orange instead of green,and it looks like it's connected to the wireless network, but i get a yellow ! and "No internet Acces" Message.Good so i go to the same store where i bought it from(only in a different city) and the guy there is really awesome and just gives me another one...on the spot..and takes mine...i was there,it was the exact same router from the shelf...the box was sealed...everything was sealed....imagine my happyness...Now i try to make it work,and guess what...same thing...same No internet Acces,and orange light instead of green.Why?
DETAILS:
Router: D-Link 615 Firmware: 8.02 H/W: H2 ISP: RCS&RDS (i'm from Europe/Romania) Internet Connection: PPPoE (username/password) Device: HP Laptop
The thing is that i'm at some relatives here, and now i need wireless for my laptop, and cable for my cousins PC.And right now not one is working.Problem: The internet Connection (or something like that...the little glove light) is green for a few seconds and then goes all orange on me....
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
I am runing Windows 7 Ultimate on my Media Station i cannot access Google or my E-Mail it says internet not connected which clearly it is,i am absolutly a no brainer when
I am using wireless internet via D link router.I am connected to the router but there is no access to the internet.There is a small yellow triangle appearing on the wireless Network icon at the right bottom corner of my laptop.I can browse and download but I am getting the message that no internet access.
I have a D-Link WBR-2310. It was working just fine until couple days ago. The problem lies with *No Internet Access* that using both wired and wireless. I havereset, shut it down for awhile. Reset the whole device still nothing. I do not have any clue what has happened. I have come up with disabling IPV4 or something? No idea how to do that and if thats right how do I go on to do it.
I just bought this DIR-601. After many sleepless night, I finally make it work with my PC(AT&TDSL modem). I can access internet with PC, but not ipad2 WiFi.ipad2 WiFi can see this router and I can select it after putting password. BTW, ipad2 Wifi should be OK, since I can access Wifi networks on my company no problem.
I have a DIR 655 connected to cable DSL modem RCA DHG534. I can connect to the internet through the Ethernet cable ports, but i can't access the internet via the wireless. The SSID will show up on the wireless computer(s) and Ad's. Under Control Panel, Network Connections, Internet Gateway is shown as disabled.
I have a DIR-655 router with a DAP-1522 connected in bridge mode. The firmware on the router is 1.21 and the firmware on the bridge is 1.21. I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption. When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655. On the status page of the DAP-1522, wireless radio is enabled and status is connected. I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.
I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection. On the XBOX 360 I cannot connect my live account. On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out. Same occurs when attempting to access the internet on the DirecTV DVR receiver.
My DIR-655 has been working flawlessly for several months since I bought it. It is connected to Road Runner High Speed Internet from Time Warner. This morning it will not access the Internet. It shows a wireless connection, and I can connect to it via direct wired connection, but no Internet. A direct connection to the Time Warner Cable Modem connects to the Internet just fine. Cycled power on all units, & Time Warner reset the modem. Nothing has fixed the Router.
I have a TP Link TL-WN722N 150mbps USB wireless adapter I use with my desktop. I've had it for about 6 months and it has been mostly fine with a few little problems. I recently went away for a few weeks and when I returned I found that my wireless adapter is running very slowly and disconecting from the router. It is an adapter problem as no one else in my house is having the same issues. When the adapter does run slowly the only way to speed it up is to unplug it and plug it in again. This puts it back to a bearable speed but usually this drops within 30 minutes.
I can only get local access when using wireless connection on 2pcs running vista home premium.Internet works fine using etheral cable and fine on windows 7 laptops.
I am having a problem in setting up my Router. Its "TP-LINK WR 720N". I have a LAN connection in the main PC and a further dialer like thing with user name and password is executed to access the internet. Each of the customers have diff IDs and passwords based on the bandwidth of the connection. The problem is that first am i connecting the Router in the right way? I put the main LAN cable into the Router's WAN port and the Other Ethernet wire i put is that from PC's Lan port to Router's LAn port. Is this right? I am confused because in the guide a modem is also mentined and i think thats for DSL users...
If i use the above settings, my LAN gets connected and the dialer also works and gets connected but when i access the internet from it, that doesn't work and no webpage opens.
Similarly, the Wireless connetion is displayed in the Laptop and when i access it, it gets connected, but it has a yellow exclamation mark in it, and the same goes here that the internet does not work. My internet connection id fine because i am sing internet no using main Lan ports of Pc, so i guess the problem i s with my Settings...
This router was just purchased this past week. I have 1 laptop, 1 desktop, and 1 netbook that is connecting to this (along with various smartphones). Set it all up according to the booklet, and ran into some trouble. When connecting through wireless, I only have "Local only" on the older laptop and desktop PC, but full internet access through the smartphones and the netbook. But, when I connect through LAN with the laptop, I have internet connection (only through LAN, not wireless). I suspect this also occurs on the PC, but the two are no where near each other to attempt. I installed the latest firmware version to no avail, and had done a full reset on the router and reinstalled it.
I think I did everything per the manual, but I cannot access my camera over the internet thru [URL] website. It says that I have to check if I have enough bandwidth, or checked if my camera is not blocked by my router But I have a Dlink DIR 655 router where I have configured the Virtual server (port 80) as it is explain in the manual I also have a DHCP reservation that works fine (I can access the camera within my network) What should I do more now to finally access my camera from internet (this is for me the interest of havinf a network camera!)
I recently went into my router and changed my security settings so that my router is WEP protected. I was having issues with somebody feeding off on my connection and causing problems with my Internet provider. I had changed it to be a secured network before but somehow it became unsecured. So, I set up an admin password and such so nobody else should be able to get into my outer . Anyway, after setting it up to with the WEP, now I cannot access the Internet from any other device except my main PC to which the router is connected.I usually get some sort of error stating that there is "limited on no connectivity" when I try to connect my laptop or Archos Home Tablet device. Yet, is reads that the signal strength is excellent and recognizes my network as existing.
I've had my DIR 615 router for quite some time. The hardware version is C1, firmware 3.01 originally. It's been fine for the most part (asides from connection issues now and then with the internet - which we rectified by unplugging modem and/or router). A couple nights ago we had a storm and the next morning the router would not connect to the internet. I tried unplugging the router and modem a number of times but could never establish a connection. The internet globe LED was originally orange but after I cut off the power, it never came back on. I tried a number of different cables between the modem and router and could not fix the issue. I bypassed the router totally and the internet works fine. After a lot of failed attempts, I decided to reset the router and reinstall it with the disc. I followed the instructions and kept getting error 322 that the router could not be found. I tried 3 different computers and 5 different wires to fix the problem but to no avail. I kept encountering the same error on each computer. Since the router can't be seen, I must bypass it totally to get any internet access so trying the online setup doesn't work because I can't connect to the router and then to the modem since there is no internet access. So now I'm stuck. I'm not sure if my router is damaged from the storm. All other lights work (LAN and wireless icon) but I can't get any internet access through the router. I'm not sure if I should just go buy another router or not. The installation checks out fine until connecting power to the router and then it can't be found.
I am running windows 7 and vista on different computers and laptops and used setup 4.1.7141.2
I was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
Region : Argentina Model : TL-MR3220 Hardware Version : V2 Firmware Version : ISP :
I set my TL-MR3020 to AP to act as a repeater to boost my wifi signal in the living.My TL-MR3020 is able to ping the main router but there is no internet access (no Internet light) on the TL-MR3020 . The main router ip is 192.168.1.1 and TL-MR3020 IS 192.168.254.0I followed exactly the instructions on how to configure the TL-MR3020 from TP-Link website and everything seems ok except no internet
For an intro, Dir 500 H/W C1, FW: 3.02. I�m getting this annoying error that seems to fallow every-time I boot up the router after being shut off, for example, my supply (Electricity) doesn�t tend to be fluid around here so sometime the device need to be shut off (Constantly or 1 time in a daily basis) it is connected to an UPS though. After everything is up and running again I get the classic yellow sign on the tray-bar internet icon stating as connected but without Internet Access?With no way to access the internet when connected to the Dir-600, I go back using my primary router to and search for the problem, ending with nothing at hand but hard-resetting or plugging the power off kind of advises, e.g; The plug-ing off method seems not do the trick anymore, ending up only with the option of reset-ing the router to its factory status which is even more annoying to do every time I want it to function properly?
Ok so basically I just got my Linksys SPA2102 from ItalkBB, and my issue is that when I hook up everything (modem, phone adapter, router) and then try and connect, I get no internet access.I've followed the instructions, everything works properly (i think) except for my internet. On the router, the symbol that represents internet is blinking orange.
