D-Link DIR-600 :: No Internet Access Even Though It States As Connected
Aug 28, 2011
For an intro, Dir 500 H/W C1, FW: 3.02. I�m getting this annoying error that seems to fallow every-time I boot up the router after being shut off, for example, my supply (Electricity) doesn�t tend to be fluid around here so sometime the device need to be shut off (Constantly or 1 time in a daily basis) it is connected to an UPS though. After everything is up and running again I get the classic yellow sign on the tray-bar internet icon stating as connected but without Internet Access?With no way to access the internet when connected to the Dir-600, I go back using my primary router to and search for the problem, ending with nothing at hand but hard-resetting or plugging the power off kind of advises, e.g; The plug-ing off method seems not do the trick anymore, ending up only with the option of reset-ing the router to its factory status which is even more annoying to do every time I want it to function properly?
View 3 Replies
ADVERTISEMENT
Feb 6, 2011
I would like to know something I have experienced quite often these last couple of weeks at my own offices as well as at some of my clients, on machines all running XP Professional, most with SP3 installed.
Sometimes it happens that only one pc at a time would have no physical connectivity to any outbound services like the internet, or any connection to another pc or the server running SBS 2003 for that matter, although the Network Status in the bottom right hand corner says it is connected, even at 100Mbs.
When opening Network Connections and I view the status of the LAN connection, it shows that packets are being sent and received, but I am not even able to ping another IP on the network, timing out every time.
The only solution to the problem seems to be "repairing" the network connection, and then all works fine again.
I would like to know what might be causing this in the first place and also what exactly a "network connection repair" is actually repairing? The reason I am asking is that I would like to find out if it might be a sign of any hardware starting to malfunction or anything in that regard, so that one could be in the clear about what to possible expect in the future.
View 2 Replies
View Related
May 1, 2012
I want to connect 2 routers in different states. How this possible. Also i want to know which service is used for this purpose?
View 1 Replies
View Related
May 10, 2011
My Acer AOD260 NAV70 Netbook states "Limited Access" when I connect to my home router.
View 1 Replies
View Related
May 19, 2011
My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
[Code].....
View 4 Replies
View Related
May 8, 2011
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies
View Related
Mar 8, 2013
Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS
i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.
View 1 Replies
View Related
Mar 19, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS
I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?
View 1 Replies
View Related
Nov 30, 2011
I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.
On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled
I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:
a). Reset DAP-1522
b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522
View 3 Replies
View Related
Dec 31, 2011
my network isn't the most optimal at the moment. Starting from the router, it's a Thomson TG789vn my roommate has set up in his room. The service is DSL. I've connected my laptop to said WLAN from which I connect my access point turned DIR-600 to the internet and share it to my PC and Xbox 360.It works pretty well most of the time with 28 ping to a ~150 miles far server, yet sometimes I lose connection overall, or partly. For example, the Battlefield 3 beta stays connected to the internet while 3 different browsers are unable to load a single page. It seems like ongoing connection are unaffected while new ones don't work. The problem is usually fixed in a few seconds when I disconnect and reconnect the WLAN on my laptop.
View 1 Replies
View Related
Oct 5, 2011
As the title might suggest, my network isn't the most optimal at the moment. Starting from the router, it's a Thomson TG789vn my roommate has set up in his room. The service is DSL. I've connected my laptop to said WLAN from which I connect my access point turned DIR-600 to the internet and share it to my PC and Xbox 360.
It works pretty well most of the time with 28 ping to a ~150 miles far server, yet sometimes I lose connection overall, or partly. For example, the Battlefield 3 beta stays connected to the internet while 3 different browsers are unable to load a single page. It seems like ongoing connection are unaffected while new ones don't work. The problem is usually fixed in a few seconds when I disconnect and reconnect the WLAN on my laptop.So yeah, it's not pretty but I have to work with what's available. I'm actually surprised it even works this well. how to optimize the whole thing or how to fix the partial lack of connectivity?
View 5 Replies
View Related
Feb 18, 2012
I am connected to my network wirelessly and I have Internet acces (according to the symbol at the bottom right) bu the Internet doesn't work. At the moment it keeps fluctuating between giving me interne and not I am using Skype to tell me if I have Internet ( when it's green I do when it's grey I don't) I have tried many things on forums like obtaining ip automatically or obtaining a fixed ip. I've tried renewing the ip and all this doesnt work.
View 4 Replies
View Related
Apr 22, 2011
well a couple days of go it was working fine until i updated windows 7 now it says im connected to the internet but when i go on it dosnt load anything, and when i go check it says that "IPv6 connectivity: No Internet access" how ever the IPv4 is connected to the internet, should i restore settings to osmetimes earlier this week
View 2 Replies
View Related
Jan 16, 2012
wireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies
View Related
Feb 24, 2011
I have the A1 version. I originally bought it and used it for a few months. I was very disappointed with the performance and went back to my Linksys WRT54G (running DD-WRT).
I recently decided to try it again. I upgraded to firmware 1.13. It worked pretty well for a week or so but now I am considering going back to my Linksys again. I keep losing my internet connectivity. The signal can be strong but internet becomes unavailable. Sometimes, just waiting it out works. Sometimes, disconnecting and re-connecting works. Sometimes, a reboot of the router works. Sometimes, nothing seems to work until it is good and ready to work. Sometimes, I cannot access the internet on my computer but my girlfriend still can. Sometimes, neither of us can connect.
I want to use it because I want the wireless-N speed to transfer files to my media center (and I paid a lot of money for it!) but the aggravation is getting to be too much.
There seems to be some correlation between visibility of my neighbors' networks and the connectivity issues but I could not swear to that. This is amazing to me because my neighbors are pretty far away and I can barely get the DIR-825 signal from my basement to my second floor.
View 4 Replies
View Related
Aug 18, 2011
I'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.
View 5 Replies
View Related
Mar 23, 2012
had this same problem last year and by a fluke i was connected to the internet so my wireless printer could access web services but one of my computers connected to the router kept disconnecting from the internet so i had to change the settings now i want to try to get the router connected to the internet again. my wireless network has no internet access so i know the router isnt connected to the internet but i am online right now through the router. My ISP is AOL Canada. I also had a message on the computer saying that the DNS server isn't responding. Also my internet has no network access. Also i had the router set for DHCP NOT PPPoE or whatever its called. also what DNS should i put for the setting or do I need to put that on router setup page for the internet. Also is there any way of stopping the other computer from disconnecting from the internet once i get the router connected to the internet? One more thing on the taskbar at the bottom of the screen where the wireless icon is theres a yellow triangle with an exclamation mark in over it how do i get rid of that when i had the router connected to the internet last year the yellow triangle was gone. And right now on the network map its showing an x through the line going from the router to the internet which i know means theres no internet from the router.
View 14 Replies
View Related
Nov 21, 2011
I just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
View 1 Replies
View Related
Jul 16, 2012
for the first time i tried to connect my laptop to a wireless connection... a yellow triangle with an exclamation mark flashed over the wireless icon...it said identifying the network and then said no internet access... i tried all the methods... i am not able to renew the ip address or reset it.... the network protection is wpa/wpa2 psk.... i know there is no problem with my router as all my other devices can access net through it.... i tried disabling the firewall and then connecting... but with no luck...in the status of the network i have ipv6= no internet access... ipv4= no internet access... when i troubleshoot the network it says invalid ip address... and when i manually enter ip address in ipv6.. there it also says invalid ip address...
View 7 Replies
View Related
Jun 28, 2012
So for a little while now I have been randomly getting a situation where my wireless connection shows "no internet access" while remaining connected to the router. I have tried a couple different wireless adapters and it has persisted. I have had my laptop next to me to see if they both lost connectivity at the same time to see if maybe it was my router or modem losing internet but my laptop remains connected fine. I think I am missing something.
View 1 Replies
View Related
Jan 24, 2012
Santa got a second-hand acer mini-laptop for my daughter this last Christmas and she accidentally pour some coke in it, I took it to the shop and I had to pay to repair it; when I got it back, the first thing is that originally it has Windows 7 and now XP, I thought it was ok, but even though I use my network passkey and everything, it quickly connected to the network showing internet access but when I open IE, it shows a message to diagnose connection problems, I run the repair wizard and nothing, but all the time it is showing that the connection is working, will I need to take it back to the shop or is there something I can do?
View 14 Replies
View Related
Oct 24, 2012
I have a cox modem and a liksys wrt54g router. I cannot access the internet to set up the router. I have followed all the required steps in hooking up the router.
View 3 Replies
View Related
May 21, 2011
trying to network 2 desktops running xp.
View 14 Replies
View Related
Jun 5, 2012
I'm not sure why I have a broadband connection AND a local area connection, but I cannot connect to the local area connection whereas the broadband connection is fine. I've already set to obtain IP address automatically and still not enabled. The wireless connection was working fine a few days ago, and seems to have been reset by the ISP causing these issues. Other devices are also unable to get internet though they can detect and connect to the router. Here is my ipconfig/all. Note: I am in China so my settings are possibly different than what you're used to.
[code]...
View 13 Replies
View Related
Mar 26, 2013
I see the router and the modem are working just fine as usual and even the guy from comcast says there is nothing wrong with the internet connection itself.The problems I am having right now are
- I can only access to Facebook, Spotify, but nothing else.
- It sometimes randomly comes back and everything works but then it only lasts for a few minutes-hours and it goes off and won't work again. I've tried resetting the modem, router, and I even tried creating a new network but nothing worked out so far.I currently own a mac and a windows 7 laptop.
View 1 Replies
View Related
Oct 11, 2011
When I looked up the internet connection status, for the packets that I received 236, I only receive 30-40. When I click repair, it said the IP address already renewed. However, the internet still not working. When I use my laptop to browse the internet, it said the same thing, internet connected but cannot browse at all.
I tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I did set the properties of the wireless connection to obtain DNS and IP automatically, I tried pinging, I turned off all my firewalls, I tried system restore, but still not working.
I run cmd /all, it got the following information:
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
When I did ping test, it said destination net unreachable, and later on I run ping test again, it said unreleased.
Later on, I did restart everything again, the packets that I received only 26, and didn't receive anything at all.
View 9 Replies
View Related
Jan 10, 2013
Im having some problems connecting to the internet. my router is perfectly connected but i cant have wireless internet connection. when i plug the cable in the wall socket and in my computer, it works perfectly. But when i try to plug it in my router to have wireless, it doesnt work. Ive tried resetting the router or installing it again. but it doesnt work.
View 4 Replies
View Related
Mar 25, 2013
I had bought three modems but when i connect them through wifi they are connected but shows no internet acess.so i am using bsnl brdbnd through wire.but iwant to connect through netgear DGN1000. WIFI
View 1 Replies
View Related
Mar 30, 2012
Everything worked fine until I went to move my desk to a different area and had to unplug everything. Upon plugging everything back up - my desktop internet works fine, but the laptop says "Connected but no internet access". I've tried working on it for 2 hours unplugging and replugging cords back up and I can't get any internet access on my laptop. I am using a cable modem. Currently I have the blue ethernet cord running from the modem, directly into my computer. I also have a grey cord that apparently was plugged into the router somehow but I don't remember how exactly I had this one plugged up. The cable modem only has one jack, for "ethernet". The router is a Linksys WRT54G and has 4 numbered (1-4) jacks in the back and then one jack for "internet". The laptop is running Windows 7, and the desktop (which the internet runs fine on right now) is running Vista.
View 3 Replies
View Related
Feb 21, 2012
Current set up all worked fine for years (wireless Netgear router, ISP AOL ) until I changed my phone provider to AOL last week. On the day of the switch I lost my internet and have not had it since.Countless calls to AOL, line checks done and all showing as clear. Technician out today and no internal faults found.The internet light on the router is flashing orange, occassionally turning green but not holding. Router problems have been ruled out. Laptop shows communication with router but there is no internet access. This can not be a coincidence, I am sure something has gone wrong on the day of the switch since that is when the problem started.I am in really close range of the exchange and technician said I have good conectivity and wondered if there was a conflict issue somewhere.
View 4 Replies
View Related
Aug 18, 2012
I can't connect suddenly to the Internet. I tried both Wired and Wireless connection to my laptop. The icon is showing that my laptop has detected the connection but has no internet access.Showing in my screen is: Connected to Network. IPV4 no internet access, IPV6 no internet accessI tried using my iPhone to connect via the wireless connection and I could get browse the Internet with it.. hence i'm sure the problem lies with the laptop.
View 10 Replies
View Related
Nov 5, 2012
I have a pc that is connected to my router through an Ethernet cable. The network sharing center confirms I am connected to my network, and that I am connected to the internet; however, I can not connect to the internet with IE, chrome, or any other internet-based application. The icon in the bottom right also says I have internet access. As well, another ethernet-connected PC in the house works just fine, and my laptop has no trouble connecting through the wireless. I have switched the connection ports on the router between the two PCs and the problem still persists.Trouble shooter results without identifying any problems and trying to "set up a new connection or network" says "you are already connected to the internet". This issue occurred over night and had been working for over a year without issue. I have restarted the router as well as the pc, connected to the router and it shows the pc as "inactive"
View 10 Replies
View Related
Feb 13, 2011
I have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.
View 1 Replies
View Related
