I'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.
View 5 RepliesI'm have a D-Link DIR-615 Wireless N 300 Router. I didn't use the CD it comes with to set up the network. Instead I configured it manually through the router's settings that are accessed via a web browser.
The main changes I made are:
Secured the router so that a password is required before clients can use the wireless internet. Broadcasting 802.11N only (not B or G).
I can connect to the router just fine and I'm able to access the internet. The only problem is that I don't see any of the other computers in my LAN. When I try connecting to another Wi-Fi router that I have (which is connected to the same network), I can see all of the computer's on my LAN just fine. Therefore, I'm guessing that the reason I can't connect to the LAN is not a problem with my computer and is a problem with the router instead.
I'm on a MacBook Air running Mac OS X 10.6.6.
I have the A1 version. I originally bought it and used it for a few months. I was very disappointed with the performance and went back to my Linksys WRT54G (running DD-WRT).
I recently decided to try it again. I upgraded to firmware 1.13. It worked pretty well for a week or so but now I am considering going back to my Linksys again. I keep losing my internet connectivity. The signal can be strong but internet becomes unavailable. Sometimes, just waiting it out works. Sometimes, disconnecting and re-connecting works. Sometimes, a reboot of the router works. Sometimes, nothing seems to work until it is good and ready to work. Sometimes, I cannot access the internet on my computer but my girlfriend still can. Sometimes, neither of us can connect.
I want to use it because I want the wireless-N speed to transfer files to my media center (and I paid a lot of money for it!) but the aggravation is getting to be too much.
There seems to be some correlation between visibility of my neighbors' networks and the connectivity issues but I could not swear to that. This is amazing to me because my neighbors are pretty far away and I can barely get the DIR-825 signal from my basement to my second floor.
had this same problem last year and by a fluke i was connected to the internet so my wireless printer could access web services but one of my computers connected to the router kept disconnecting from the internet so i had to change the settings now i want to try to get the router connected to the internet again. my wireless network has no internet access so i know the router isnt connected to the internet but i am online right now through the router. My ISP is AOL Canada. I also had a message on the computer saying that the DNS server isn't responding. Also my internet has no network access. Also i had the router set for DHCP NOT PPPoE or whatever its called. also what DNS should i put for the setting or do I need to put that on router setup page for the internet. Also is there any way of stopping the other computer from disconnecting from the internet once i get the router connected to the internet? One more thing on the taskbar at the bottom of the screen where the wireless icon is theres a yellow triangle with an exclamation mark in over it how do i get rid of that when i had the router connected to the internet last year the yellow triangle was gone. And right now on the network map its showing an x through the line going from the router to the internet which i know means theres no internet from the router.
View 14 Replies View RelatedFor an intro, Dir 500 H/W C1, FW: 3.02. I�m getting this annoying error that seems to fallow every-time I boot up the router after being shut off, for example, my supply (Electricity) doesn�t tend to be fluid around here so sometime the device need to be shut off (Constantly or 1 time in a daily basis) it is connected to an UPS though. After everything is up and running again I get the classic yellow sign on the tray-bar internet icon stating as connected but without Internet Access?With no way to access the internet when connected to the Dir-600, I go back using my primary router to and search for the problem, ending with nothing at hand but hard-resetting or plugging the power off kind of advises, e.g; The plug-ing off method seems not do the trick anymore, ending up only with the option of reset-ing the router to its factory status which is even more annoying to do every time I want it to function properly?
View 3 Replies View RelatedMy desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
[Code].....
I've got the Di-614+ connected to a Wimax system. The Wimax is plugged into one of the LAN jacks in the Di-614+ (i tried pluggin it into the WAN jack but it does not work). I'm able to use the internet fine without any problems using the wireless connection on my laptop.
The thing is the ip 192.168.1.1 is set to open up the setup page of my Wimax modem. I cant seem to access the setup page of my Di-614+. I tried disconnecting the Wimax jack, and still google chrome just responds with "This webpage is not available". My other option is to hard reset the wireless router. But i worry it will ask for a password and i wont know it.
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies View RelatedI cannot access any internet browsers. My OS is Vista and I use Verizon Fios. My computer is hooked up to my modem via ethernet cable.I have no computer and am chilling at friends house to use his internet on his lap top.
View 13 Replies View RelatedSetup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections
No.1 Connected to the Belkin & Internet working
No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2
When I attempt to connect to the internet on computer No.2 it will not connect.
1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.
I have a DIR-655 Rev B1, FW 2.01 (I will probably upgrade the FW tonight to the latest.)
I have at least 20 items that connect wirelessly to this router (2 PCs, 2 Laptops, 2 Tivo Box, 3 Game Consoles, 3 Cell Phones, 2 Tablets, 2 TVs, Printer, AP Gateway, and some other projects) It's been a solid connection to everything for the past couple of years.
I bought a new Dell Inspiron 15r SE laptop (uses the Intel Centrion Wireless-N 2230 Wifi Solution.) After anywhere from 2 - 10 mins of browsing/watching a video/downloading files the access out to the internet simply stops.
At this point I'm still connected wirelessly to the router, and if I go to the router address I still have access and can login and see the router settings. I check and there's plenty of time left on the lease (days.) Still not getting internet access. Eventually my Laptop will disconnect and reconnect (or I do it manually.) I've performed hard resets of the router, I've had my laptop Forget the network and then reconnect, etc. Nothing has resolved it.
I thought it may be my laptop, but I've taken it to Starbuck, Work, Neighbors WiFi, etc and I don't have any problems staying connected on their networks.
I've had Dell on the line, we connected hardwired, and there solution was to force forget and reconnect to the router, which worked for the 10min he was on the line with me, but then failed soon after, and back in the same connectivity hell
Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS
i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS
I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?
i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..
View 14 Replies View RelatedRegion : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : time warner
This is frustrating I owned the router for about 2 weeks. my 2.4ghz is out. Basically I connect to the router on 2.4 can get into the tp-link admin webpage for the router but no internet at all. if I switch to 5 ghz everything works great, or if i use direct connect wire everything is great. I tried disabling NAT but that shut down all my internet connections across all links and manually switching to channel 1 did nothing at all i also tried channel 7. Ideas why only 2.4 ghz is affected out of the blue all of a sudden?
I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.
I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.
I have tried everything (to the best of my knowledge). I have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail.The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again noI have seen on a few forums that when people provide their HijackThis logs.[CODE]
View 1 Replies View RelatedI'm connecting to the internet using a wireless connection but i can't go online on either of my messengers nor go on the web using any of my browser but i can download things using my torrent programs(Bitcomet),I'm using an Acer laptop with 4gb DDR3 and Win 7.
View 1 Replies View RelatedAm trying to fix my husband's computer, which seems to eb ok except that it cannot connect to the internet. The connection is wired and works fine (my computer, next to his, works well). I have tried pinging google.com and cannot resolve, but pinging numerical addresses works fine.
View 1 Replies View RelatedI have been having an internet connection problem recently. My laptop can connect to networks, but not to the internet. I have tried two locations with wireless networks, and both do not work on my computer, but do on other computers, so I know it is my computer and not the network that is the problem
View 10 Replies View RelatedI have recently just joined hometelecom through a letting agency. Router came, I've installed and connected to my PC, but can't get an Internet connection?
View 11 Replies View RelatedI have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail. The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again no joy
HijackThis logs. Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:31:15 PM, on 4/13/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Unable to get Internet Explorer version!
[code]....
My nana has just got a second hand laptop (refurbished) which we cannot get connected to the internet. She has tried it at her own home and also at ours. Both houses have working internet connections. The wireless says it is connected with excellent signal strength but when you try and open up Internet explorer, nothing happens. Sometimes you end up with a page cannot be displayed error and sometime it just stays white with the 'waiting for reply' status up. The top and bottom bars say that the web site has been found but then nothing. When trying to diagnose the problem using the tool on 'page cannot be displayed' I get the following error. [code] I have tried connecting the laptop to the router directly using the ethernet cable but a bubble appears saying 'limited or no connectivity'.I have checked that nothing is ticked in proxy settings too.
View 1 Replies View RelatedI have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients. I have my primary computer/desktop PC connected via wired connection. I also have several wireless clients (laptop, iPad, iPhones, etc.). All have been performing normally. However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.
It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website. This continues as long as I'm using the desktop PC. When I stop using the desktop, the weather bridge resumes normally.
I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it. It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work. I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.
On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion. According to the settings, it can do 10 or 100, full or half. I have it set to AUTO.
I have a router with wireless capabilities but my tv is far from the router and impossible to connect with an ethernet cable. Is there any way to install a Roku wirelessly to your HD tv?
View 3 Replies View RelatedI have a home ADSL2 Modem Router. I have 3 computers connected to this wireless network and also with Internet access. However, I have 1 notebook connected to the wireless network but saying No Internet access.
View 13 Replies View RelatedSo I'm trying to fix gateway laptop running Vista. The computer can connect both wired and wirelessly to the internet just fine. Sadly that's all it does. It doesn't let you use IE/Firefox/Skype or video games or anything. Every program acts like you're not connected. All signs seem to point towards it working just fine. I'm at a loss and can't figure out what's wrong with it.
Also, the internet works just fine if you start in safe mode with networking. You can use IE/Firefox just fine. I've tried turning off proxies and such but there aren't any as far as I can tell.
I am trying to figure out why or what is preventing my uncle's laptop to connect via the Ieee connection. The netcard says it is installed and the troubleshooting checks ok. the message is "cable not connected" I've checked the cable and is good.
View 1 Replies View RelatedI have a Gateway NV59 that I had not used for some time. Recently I started to use it, and I cannot connect to any web pages. I am connected to my wireless network. I have tried all the diagnostic tests I can find on my laptop, and they do not identify the problem. I am running Windows 7 Home Premium. I have Explorer, Safari, and Firefox browsers and non of them will work.
View 7 Replies View RelatedMy 1394 status shows connected. But the lite on my input cable is not on?
View 1 Replies View RelatedI just bought a new router and i'm not able to access the internet on one of my laptops even though on the laptop it shows that its connected with full bars, it doesnt have this problem with the other routers i use. Also all my other computers are able to access the internet on this new router.
View 1 Replies View RelatedI tried my entire afternoon trying to figure this out but to no avail. Fortunately, I found this place out of my desperation for a solution. My netbook works very well in my home network but when I brought it to my workplace, I was unable to connect to the internet eventhough I could connect to the wireless network. Other computers and laptops were able to connect and use the internet well using the same router. I tried manually configuring my IP and default gateway based on what I read but nothing worked.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, x86 Family 6 Model 28 Stepping 2
Processor Count: 2
RAM: 1011 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 224 Mb
Hard Drives: C: Total - 109474 MB, Free - 7145 MB;
Motherboard: Acer,
Antivirus: Avira AntiVir PersonalEdition, Updated: No, On-Demand Scanner: Enabled
I am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies View Related