Can't Connect To Internet But Status Showing Connected
May 13, 2011
So I'm trying to fix gateway laptop running Vista. The computer can connect both wired and wirelessly to the internet just fine. Sadly that's all it does. It doesn't let you use IE/Firefox/Skype or video games or anything. Every program acts like you're not connected. All signs seem to point towards it working just fine. I'm at a loss and can't figure out what's wrong with it.
Also, the internet works just fine if you start in safe mode with networking. You can use IE/Firefox just fine. I've tried turning off proxies and such but there aren't any as far as I can tell.
View 11 Replies
ADVERTISEMENT
Nov 3, 2012
I am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies
View Related
Nov 19, 2012
My 1394 status shows connected. But the lite on my input cable is not on?
View 1 Replies
View Related
Sep 24, 2011
Wireless status is connected but internet won't work
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNate>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 1 Replies
View Related
May 16, 2011
OK, so just mooching around in the pages of my switch, a 24 port switch and it has in the logs:
268InfoMay 15 22:43:51NIMInterface 26 is Link Down
269InfoMay 15 22:43:51NIMInterface 26 is Link Down
270InfoMay 15 22:43:51NIMevent(39),intf(26),component(2), on non-existent interface
Now, correct me if I`m wrong but my switch only has 24 ports and two of those (23 and 24) are dual personality jobbies!?Where the hell is port 26? Where did it come from? and why did it need to show up only for the switch to realise that it doesn`t really exist?
View 2 Replies
View Related
Feb 27, 2011
the little computer icon in the system tray has a red "x" on it and says "not connected" BUT i can connect to the internet connect to websites just fine..why does it say not connected?
View 3 Replies
View Related
Feb 16, 2010
I have a Cisco 2106 WLC, and a 1131ag Access Point. The 802.11a/g Radio "Operational Status" = DOWN. All other Radios are UP. I'm wondering if this is normal behavior as no clients are connecting to it over the 802.11a/g Radio.
View 8 Replies
View Related
Dec 19, 2012
I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies
View Related
Sep 26, 2010
My wireless connection for my laptop is showing upas N on Win 7 but G on DIR-655 status page??? I'm confused. Am I getting N speeds/coverage or stuck with G. If G, why? I've tried wiping my wireless network config. on Windows and reestablishing it, but no change. The DIR-655 config page shows my machine connected at 54 Mbps and Type as G
View 8 Replies
View Related
May 7, 2012
I have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.I did a factory reset and it was ok ... past 3 days the problem has happened again.I changed the ap with a new but the situation remained.I tested the wiring and everything is ok.the switch port is set up correctly.
View 11 Replies
View Related
Jun 30, 2011
We have a root AP whose status light is showing solid red. We power cycled it and it still shows solid red. According to the Cisco documentation, this indicates a firmware failure. Unfortunately, we did not get Smartnet with this access points and instead opted for the limited lifetime warranty.
My question is: is there any way to fix the firmware via console? Whether it be through xmodem or what not. I ran debugs on the controller and can confirm that the AP is not communcating with the controller.
It is also weird that the mesh APs that were previously connected to this root AP show a solid red on their status lights and green for their RF LEDs. Shouldn't the status LED be flashing green-amber-red?
View 1 Replies
View Related
Feb 26, 2011
No sent and receive in network connection. unable to connect to internet. 1394 status is connected
View 1 Replies
View Related
Feb 18, 2011
On my Switch (3750), i have a host connected. Checked the interface status and it shows as "connected". However, when i tried checking the MAC connected to that interface, its not showingI have my Switch (3750) connected to a Router (3845). On the Switch, i have a printer connected in an interface. I am seeing the Printer's MAC associated with the switch port. However, when i checked the ARP table; no entry seen for the Printer's MAC. What are the possible reasons for this? We have several same kind of devices connected to network and they are fine.
View 5 Replies
View Related
Aug 29, 2011
There was a big storm last night, and when I woke up I found that I couldn't connect to the internet. I have my computer plugged into the cable modem. The Windows network status says "Not connected, No connections are available". The onboard NIC that I had been using is no longer showing up in the device manager. I figured lightening might have knocked it out, even though my computer is behind a UPS and surge protector, so I bought a PCI ethernet card. This installed correctly and is showing up in the device manager, but I'm still getting the same error. When I unplug the ethernet cable, there is no change in the status.
View 6 Replies
View Related
Feb 6, 2011
I would like to know something I have experienced quite often these last couple of weeks at my own offices as well as at some of my clients, on machines all running XP Professional, most with SP3 installed.
Sometimes it happens that only one pc at a time would have no physical connectivity to any outbound services like the internet, or any connection to another pc or the server running SBS 2003 for that matter, although the Network Status in the bottom right hand corner says it is connected, even at 100Mbs.
When opening Network Connections and I view the status of the LAN connection, it shows that packets are being sent and received, but I am not even able to ping another IP on the network, timing out every time.
The only solution to the problem seems to be "repairing" the network connection, and then all works fine again.
I would like to know what might be causing this in the first place and also what exactly a "network connection repair" is actually repairing? The reason I am asking is that I would like to find out if it might be a sign of any hardware starting to malfunction or anything in that regard, so that one could be in the clear about what to possible expect in the future.
View 2 Replies
View Related
Nov 25, 2012
Two days ago I booted my laptop and found that I'm not able to connect to the internet via LAN. It didn't detect a connection, even though my cable was plugged in. It was able to detect the wifi networks from my neighbors, but that's not an option, i need the LAN. I changed absolutely nothing,nno updates, downloads, ... It just came out of nowhere.I already eliminated a cable problem, the laptop from my roommate was able to connect without a problem.When I plug the cable in mine, the lights on the port flicker, making me believe that it's not a problem with my port either.it's definitely a computer problem, but I'm not sure if it's my computer or my network adapter that's being a PITA.When I go to the Device Manager, the network adapter (broadcom 802.11g) is fine, no red x or yellow exclamation point. i have already tried turning it on and off, and uninstalling and then rebooting, no avail.
View 6 Replies
View Related
Oct 31, 2011
I'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?
E3000WRT-54GWVC-80N
View 3 Replies
View Related
Feb 12, 2011
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies
View Related
Jun 16, 2013
I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies
View Related
Oct 3, 2012
I recently got a toshiba satellite laptop running win xp.. at first when i connected it had internet..but after adding avg antivirus it began showing limited or no connectivity. ran antivirus ... cleaned up system..changed the ip addresses and now it says connected.. but i cannot go to google or any other online page. it says there is no response from default gateway or dns server... not sure what else to do . I tried rolling back system to before i did anything and still the same.
View 6 Replies
View Related
Aug 17, 2011
how do i start my computer from when it was purchased. it keeps crashing and it keeps showing that i am not connected even though i pay 24-99 each month
View 1 Replies
View Related
Oct 16, 2012
I have configured remote access VPN with radius authentication in my firewall ( ASA 5510). When tried to connect the VPN with Cisco vpn client, the following error is showing,
"Error: Secure VPN connection terminated by Peer. Reason 433 (Reason not specified by peer)".
View 1 Replies
View Related
Dec 16, 2012
I have tried all firmware and go into router settings and it shows it's sending a wireless signal to Xbox. I have it connected via Cat5 cable.
View 5 Replies
View Related
Apr 26, 2011
I just got a DIR-655 and set it all up pretty easily. I have 6 wired and 3 wireless. All work fine and all are set to use DHCP. But if I go (in the router) to the Lan Computers list under Device Info, three devices (2 wired, 1 wireless) do not appear. I do have a switch added to the system, but of the three devices connected to it, 1 shows in th Lan Computers list and the other 2 do not.Since everything works, I'm mostly just curious why this is. Every previous router I've had showed everything correctly.
View 3 Replies
View Related
Jan 28, 2012
I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies
View Related
May 26, 2011
I cannot access any internet browsers. My OS is Vista and I use Verizon Fios. My computer is hooked up to my modem via ethernet cable.I have no computer and am chilling at friends house to use his internet on his lap top.
View 13 Replies
View Related
Apr 13, 2012
I have tried everything (to the best of my knowledge). I have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail.The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again noI have seen on a few forums that when people provide their HijackThis logs.[CODE]
View 1 Replies
View Related
May 22, 2012
I'm connecting to the internet using a wireless connection but i can't go online on either of my messengers nor go on the web using any of my browser but i can download things using my torrent programs(Bitcomet),I'm using an Acer laptop with 4gb DDR3 and Win 7.
View 1 Replies
View Related
Aug 7, 2012
Am trying to fix my husband's computer, which seems to eb ok except that it cannot connect to the internet. The connection is wired and works fine (my computer, next to his, works well). I have tried pinging google.com and cannot resolve, but pinging numerical addresses works fine.
View 1 Replies
View Related
Dec 29, 2011
I have been having an internet connection problem recently. My laptop can connect to networks, but not to the internet. I have tried two locations with wireless networks, and both do not work on my computer, but do on other computers, so I know it is my computer and not the network that is the problem
View 10 Replies
View Related
Oct 21, 2012
I have recently just joined hometelecom through a letting agency. Router came, I've installed and connected to my PC, but can't get an Internet connection?
View 11 Replies
View Related
Apr 13, 2012
I have tried stopping certain programmes from launching from start up (using msconfig.exe) and deselecting unnecessary programmes.The internet works in Safe Mode with Networking and I have run Malwarebytes Anti-Malware but to no-avail. The router is working because my iPad and other PC's are connected to the same network and are all operating perfectly. I am running on a wireless network and tried an ethernet connectinon but again no joy
HijackThis logs. Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:31:15 PM, on 4/13/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Unable to get Internet Explorer version!
[code]....
View 8 Replies
View Related
Jan 7, 2012
My nana has just got a second hand laptop (refurbished) which we cannot get connected to the internet. She has tried it at her own home and also at ours. Both houses have working internet connections. The wireless says it is connected with excellent signal strength but when you try and open up Internet explorer, nothing happens. Sometimes you end up with a page cannot be displayed error and sometime it just stays white with the 'waiting for reply' status up. The top and bottom bars say that the web site has been found but then nothing. When trying to diagnose the problem using the tool on 'page cannot be displayed' I get the following error. [code] I have tried connecting the laptop to the router directly using the ethernet cable but a bubble appears saying 'limited or no connectivity'.I have checked that nothing is ticked in proxy settings too.
View 1 Replies
View Related
