D-Link DIR-655 :: Router Not Connected To Internet?

Mar 23, 2012

had this same problem last year and by a fluke i was connected to the internet so my wireless printer could access web services but one of my computers connected to the router kept disconnecting from the internet so i had to change the settings now i want to try to get the router connected to the internet again.  my wireless network has no internet access so i know the router isnt connected to the internet but i am online right now through the router.  My ISP is AOL Canada.  I also had a message on the computer saying that the DNS server isn't responding.  Also my internet has no network access. Also i had the router set for DHCP NOT PPPoE or whatever its called.  also what DNS should i put for the setting  or do I need to put that on router setup page for the internet. Also is there any way of stopping the other computer from disconnecting from the internet once i get the router connected to the internet? One more thing on the taskbar at the bottom of the screen where the wireless icon is theres a yellow triangle with an exclamation mark in over it  how do i get rid of that  when i had the router connected to the internet last year the yellow triangle was gone.  And right now on the network map its showing an x through the line going from the router to the internet which i know means theres no internet from the router.

View 14 Replies


ADVERTISEMENT

New D-Link Modem / Router Connected But No Internet Access?

May 19, 2011

My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.

Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model

[Code].....

View 4 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 / MTS 2G Dongle / Connected But No Internet Access

Mar 8, 2013

Region : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS

i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Connected Wireless To TL-MR3040 But No Internet Access

Mar 19, 2013

Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS

I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?

View 1 Replies View Related

D-Link DIR-825 :: Connected But Internet Drops Off?

Feb 24, 2011

I have the A1 version. I originally bought it and used it for a few months. I was very disappointed with the performance and went back to my Linksys WRT54G (running DD-WRT).

I recently decided to try it again. I upgraded to firmware 1.13. It worked pretty well for a week or so but now I am considering going back to my Linksys again. I keep losing my internet connectivity. The signal can be strong but internet becomes unavailable. Sometimes, just waiting it out works. Sometimes, disconnecting and re-connecting works. Sometimes, a reboot of the router works. Sometimes, nothing seems to work until it is good and ready to work. Sometimes, I cannot access the internet on my computer but my girlfriend still can. Sometimes, neither of us can connect.

I want to use it because I want the wireless-N speed to transfer files to my media center (and I paid a lot of money for it!) but the aggravation is getting to be too much.

There seems to be some correlation between visibility of my neighbors' networks and the connectivity issues but I could not swear to that. This is amazing to me because my neighbors are pretty far away and I can barely get the DIR-825 signal from my basement to my second floor.

View 4 Replies View Related

D-Link DIR-825 :: Connected To PC Does Not Connect To Internet

Aug 18, 2011

I'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.

View 5 Replies View Related

D-Link DIR-600 :: No Internet Access Even Though It States As Connected

Aug 28, 2011

For an intro, Dir 500 H/W C1, FW: 3.02. I�m getting this annoying error that seems to fallow every-time I boot up the router after being shut off, for example, my supply (Electricity) doesn�t tend to be fluid around here so sometime the device need to be shut off (Constantly or 1 time in a daily basis) it is connected to an UPS though. After everything is up and running again I get the classic yellow sign on the tray-bar internet icon stating as connected but without Internet Access?With no way to access the internet when connected to the Dir-600, I go back using my primary router to and search for the problem, ending with nothing at hand but hard-resetting or plugging the power off kind of advises, e.g; The plug-ing off method seems not do the trick anymore, ending up only with the option of reset-ing the router to its factory status which is even more annoying to do every time I want it to function properly?

View 3 Replies View Related

D-link Di-614+ Connected To Wimax - No Response But Internet Works?

Jun 18, 2011

I've got the Di-614+ connected to a Wimax system. The Wimax is plugged into one of the LAN jacks in the Di-614+ (i tried pluggin it into the WAN jack but it does not work). I'm able to use the internet fine without any problems using the wireless connection on my laptop.

The thing is the ip 192.168.1.1 is set to open up the setup page of my Wimax modem. I cant seem to access the setup page of my Di-614+. I tried disconnecting the Wimax jack, and still google chrome just responds with "This webpage is not available". My other option is to hard reset the wireless router. But i worry it will ask for a password and i wont know it.

View 5 Replies View Related

D-Link DIR-615 :: Computers Connected To LAN Through Switch Could Not Access Internet

May 8, 2011

My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.

View 7 Replies View Related

D-link DSL-502T Network Connected But Internet Connection Failed

Mar 1, 2011

Setup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections

No.1 Connected to the Belkin & Internet working

No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2

When I attempt to connect to the internet on computer No.2 it will not connect.

1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.

View 1 Replies View Related

D-Link DIR-655 :: New Laptop Looses Internet But Stays Connected To Wireless

May 14, 2013

I have a DIR-655 Rev B1, FW 2.01 (I will probably upgrade the FW tonight to the latest.)

I have at least 20 items that connect wirelessly to this router (2 PCs, 2 Laptops, 2 Tivo Box, 3 Game Consoles, 3 Cell Phones, 2 Tablets, 2 TVs, Printer, AP Gateway, and some other projects)  It's been a solid connection to everything for the past couple of years.

I bought a new Dell Inspiron 15r SE laptop (uses the Intel Centrion Wireless-N 2230 Wifi Solution.)  After anywhere from 2 - 10 mins of browsing/watching a video/downloading files the access out to the internet simply stops. 

At this point I'm still connected wirelessly to the router, and if I go to the router address I still have access and can login and see the router settings.  I check and there's plenty of time left on the lease (days.)  Still not getting internet access.  Eventually my Laptop will disconnect and reconnect (or I do it manually.)  I've performed hard resets of the router, I've had my laptop Forget the network and then reconnect, etc.  Nothing has resolved it. 

I thought it may be my laptop, but I've taken it to Starbuck, Work, Neighbors WiFi, etc and I don't have any problems staying connected on their networks.

I've had Dell on the line, we connected hardwired, and there solution was to force forget and reconnect to the router, which worked for the 10min he was on the line with me, but then failed soon after, and back in the same connectivity hell 

View 4 Replies View Related

D-Link DIR-655 :: Blue And Orange Blinking At Same Time - Internet Still Connected

Nov 5, 2011

i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..

View 14 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 Ghz Connected But Not Internet

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : time warner

This is frustrating I owned the router for about 2 weeks. my 2.4ghz is out. Basically I connect to the router on 2.4 can get into the tp-link admin webpage for the router but no internet at all. if I switch to 5 ghz everything works great, or if i use direct connect wire everything is great. I tried disabling NAT but that shut down all my internet connections across all links and manually switching to channel 1 did nothing at all i also tried channel 7. Ideas why only 2.4 ghz is affected out of the blue all of a sudden?

View 12 Replies View Related

D-Link DIR-655 :: Slowing Internet Down But Fine When Directly Connected To Modem

Jun 9, 2011

I have been using my DIR-655 for about 2 weeks now with Road Runner wideband services. Starting yesterday my internet became very slow and I discovered the cause was the router. I tried resetting it to factory settings and things will be fine and run smoothly for about 5-15 minutes but after that it goes back to being extremely slow. My speed tests would go from 10ms (normal) to 250-450ms. Before this issue occurred the Dlink was perfect, had full speeds. I am running a wire Ethernet connection.

I am currently using revB and tried upgrading firmware to 2.01NA which had no effect, but make my internet seemingly go back to normal for the first few minutes then nosedive again. I have also changed my speed/duplex settings in Network Config to 1gbs Full Duplex. I've also disabled QoS, and still no change. Not sure what else to do. When directly connected to the modem everything seems fine. The modem is also the provided Motorola SBG6580 which I have called Time Warner to set the modem into bridge mode and have the DIR-655 connected to it.

View 12 Replies View Related

D-Link DIR-655 :: Connected A Wired Weather Internet Bridge To Another Ethernet Port

Feb 14, 2013

I have the DIR-655, Rev. B running 2.07NA firmware, and have a strange problem with my wired clients.  I have my primary computer/desktop PC connected via wired connection.  I also have several wireless clients (laptop, iPad, iPhones, etc.).  All have been performing normally.  However, in December I connected a wired weather internet bridge to another ethernet port on the DIR-655.

It functions as it is supposed to, and all other connected devices do as well. But here's the problem - whenever I use the desktop PC (the only other wired connection) to do anything on the internet (mostly just web browsing ... I don't stream media from the internet on it, I don't do torrents....nothing out of the ordinary, and nothing really of high bandwidth), the wired weather bridge cannot communicate with its associated website.  This continues as long as I'm using the desktop PC.  When I stop using the desktop, the weather bridge resumes normally.

I have researched the weather bridge, and it is simply doing POST transactions (or so I'm told) to the website listening to it.  It doesn't wait for acknowledgements or anything...just keeps POSTing updates. I tried reserving an IP for the weather bridge and the desktop, enabling QoS, and prioritizing the weather bridge (100 vs. desktop at 125), but it didn't work.  I've tried moving the weather bridge into the DMZ. I'm totally baffled how just using the desktop to browse the internet could completely block the traffic from the weather bridge.

On the weather bridge support site, they suggested that I insure I'm not connected in gigabit speeds from my computer to the router, because in the past that has been known to cause issues on clients not running that speed, but I don't think my desktop is connected in that fashion.  According to the settings, it can do 10 or 100, full or half.  I have it set to AUTO.

View 3 Replies View Related

D-Link DIR-615 :: See Who's Connected To Router?

May 11, 2011

How do you determine who's connected to my wireless router?

I can see the "lan computers" section under the "device info" section under "status". It lists computers that were connected yesterday but have been powered down for at least 12 hours? Renew'ing or releasing the router doesn't update the list.

Also is there a way, from my router, to force a computer off my network?

View 1 Replies View Related

D-Link DIR-825 :: Router Does Not Appear To Be Connected Properly?

Feb 11, 2013

So I have a DIR-825, I got from a family member as they didn't need it anymore. (Don't know if its under any warranty at all) I have a few different problems with it:

1. It doesn't install correctly. I insert the disc, the "Checking adapter enabled" finishes quickly and easy. Then the "Checking network status..." goes for about 30 seconds - 1 minutes and then I get the "Your new router does not appear to be connected properly." It gives the Follow these steps message of checking connections/resetting/etc, which I have done multiple times without success.

2. Despite the failed install, I DO get an internet connection. It starts to get weird though. I have 3 different connections currently connected to it with the following properties:

Modem>Computer (Wired) - 16 MB/Second
Modem>Router>Computer (Wired) - 3 MB/Second
Modem>Router>Laptop (Wireless) - <1 MB/Second
Modem>Router>iPhone (Wireless) - 13 MB/Second

I've tried looking through the options on my router but nothing looks like it will work .

View 3 Replies View Related

D-Link DIR-615 Wireless N Router Cannot Be Connected To By Apple TV?

Jan 13, 2011

recently purchased the Wireless N D-Link Router DIR-615. After a few hiccups the router works with all of our computers, blackberry's, wireless printer and Ipod touch's however my Apple TV 1G will not connect to the network. The Apple TV will just give the error code -6 after the password for the network has been entered. I double checked that the password for the router is only WEP 10 hex digits and that it is correct have tried reseting the Apple TV to the factory settings and using the DHCP Reservation in the network settings of the router and manually configuring the TC/IP settings on the Apple TV (Not quite sure what I am doing with this though so put everything back). I have also tried switching the 802.11

View 4 Replies View Related

D-Link DIR-655 :: Can't Get To Website When Router Connected To Computer

Apr 1, 2011

Can't get to my Web site with router is connected to my computer and when I connect to my computer with out the router in-line I can connect. I tried the reset in the back but it didn't work. 

View 11 Replies View Related

D-link Dir-615 :: Router Can Be Connected Through Wifi But Not With Cable

May 10, 2013

i recently bought my dir-615 to hook up with my tp- td 8816 modem. After setting it up and successfully working one day, the router randomly stopped sending a WiFi signal. I restarted it twice and it began to work once more. I decided to install dd wrt build 21061 for my E3 dir -615 router. Unfortunately, i could not get it to work. I have dsl internet and my isp uses PPPoE. I used the option for the set up and filled out the appropriate information, but it would not work and the internet light on the router would turn orange.

Unfortunately i decided to play around with this router at the wrong time and the people in my house needed it. I decided to quickly re flash it by going into the emergency room(holding reset button during router reset until orange button starts blinking). However when i select the official d link firmware, it simply will not change. The page is stuck loading on the d-link emergency room page with no progression whatsoever. I tried the process 3 times already.

For some reason, i can connect to the router through WiFi but not through cable. When i connect through WiFi i am on the dd wrt firmware. I don't think i can return the modem to the store since it is clearly on DD WRT firmware.

I'm either looking for a solution to re flashing back to stock firmware, or making the internet work on the dd wrt firmware. The internet light turns orange when i select PPPoE on the set up...

View 3 Replies View Related

D-Link DCS-930L :: Works Connected To Router Via Lan But Not Wireless?

Aug 11, 2011

Since the blackout beginning of this week from dlink I had to reset my camera totally to operate it again. works now again with iphone and with mydlink. But it only works as long it is connected via lan cable to my router. I accessed the set up (via ipaddress) and entered the router details to the setup but as soon I disconnect from lan it does not work anymore. What did I oversee.

MAC OS X
Airport extreme

View 1 Replies View Related

D-Link DIR-615 :: Router Name / Wireless Printer Not Connected After Reset

Jan 14, 2012

I need the router's name and can't find it. I've tried every combination I can think of and still no luck. I thought it it might be the SSID but no.

View 1 Replies View Related

D-Link DIR-655 :: Picky Router Acts Up When Mac PowerBook Is Connected

Oct 11, 2011

My D-Link655 is 6 months old. Liked it so much that I bought one for my sister in-law, and my mother/father in-law. Whenever my son's Mac PowerBook Pro (latest Mac OS) is on the network (WiFi) the router intermittently stops working. It loses connection for both WiFi and Wired (at the same time).  The intermittent issues seem to disappear when he disconnects the MacBook Pro.

-Current Firmware Version :1.32NA
-Current Firmware Date :2009/07/09

Perhaps it is coincidence, but it seems when the Mac is connected, the router fails every so many minutes (both WiFi and Wired). When the Mac is disconnected, the intermittent issues are gone.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3020 Couldn't Get Connected To Router

Feb 7, 2013

Region : Turkey
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : (120817)
ISP : turkcell

I have recently purchased the portable TP link 3020 which is a great solution for me in order to get wifi for multiple users till I get through the long process of getting ADSL in Turkey.The thing is that the 3G bundle Turkcell provided me with is not identified by the modem, so I looked it up on the internet and I found out that I needed to add the bin of the bundle, I searched within the list published on TPLINK website but without any luck.... finally I found the bin I was looking for in another country list... mine is Huawei E353 and the one I found is Huawei E353s2. Anyway I added the bin and still not luck identifying the bundle, I finally resorted to upgrade the firmware which I hate because I always worry of the bad consequence of failure, and unfortunately I was right! Once I upgraded the firmware, I couldn't get connected to the router, it keeps asking me for the key, but without any success! I tried hardware reset by holding the WPS button for 5 seconds as suggested in the manual, but any further success!

View 1 Replies View Related

D-Link DIR-655 :: Router Is Not Recognizing Laptop As Directly Connected Device

Oct 27, 2011

I have a setup where there are two networks. A 172.16.0.0/16 and a 10.1.0.0/16 that are separated by the dlink router. I am able to ping from the 172 network to the 10 network using a laptop that is directly connected to the router and that laptop can also browse the web fine. However, I cannot ping to that router or access that subnet at all from the 10 network (if I try to access its LAN (the 172 network)). The 172 network is on its LAN and the 10 network is its WAN. I can access its WAN fine. Also, there the router is not recognizing the laptop as a "directly connected deivce" but its not preventing the laptop from using the router. I have tried to make the router as least secure as possible but still nothing.

I thought about making Static Route to point towards the router's LAN but the only option it gives me is the WAN for the exit interface.

View 1 Replies View Related

Cisco WAN :: No Link On 1941 Router When Connected To Routed Port?

Aug 30, 2012

During an installation, we plugged a Ruckus wireless bridge (powered by a PoE injector) into G0/0 on the 1941.  The port status remained down/down.  We then tried connecting it to G0/1.  Again, the port status remained down/down.  We took another wireless bridge, plugged it into G0/0 and the port changed to up/up status within a few seconds.  The same happened when connected to G0/1.  Both ports are have speed/duplex set to auto/auto.We took the cable from the first wireless bridge and connected it a 3550 switch, the FastEthernet port went up/up.  We then took the cable and connected it to a switchport card (HWIC-4ESW) that was installed in the 1941 router.  The port came up/up.We connected to wireless bridge back to G0/0 in the 1941 and manually set the speed/duplex to 1000/full.  The link light on the router became illuminated after a few seconds but no console message was displayed (nor did any events appear in the log) and a "show int g0/0" showed the port status as down/down. This was could not be duplicated as this only happened one time The wireless bridges sit atop of a water tower and are connected each via a shielded ethernet cable.  The cable that we're having trouble with is cat5e STP and about 310feet in length.  I should note that we have not yet swapped the PoE injector but it seams to be functioning properly as power is getting to the wireless bridge and its accessible.  Also because if the wireless bridge for some reason didn't come back up after a power cycle it would potentially mean climbing the tower to perform a hard reset.  We tried another 1941 with same results however we have not tried another router model to rule out a potential platform issue.  Can you recommend any troubleshooting steps to determine why the port status of the gig interfaces on the 1941 don't come up?

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - How To Check Who Is Connected To Router

Apr 11, 2013

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Teksavvy

how can I see who connected to my router?

View 2 Replies View Related

D-link Dir-655 :: Router Drops All Connections Once Connected Via Wifi To Specific Notebook

Jan 9, 2012

My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to  two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one

View 7 Replies View Related

Connected To Router But No Internet?

Aug 25, 2011

I can connect to the internet with a cable straight from the modem but cant get online through wifi. Have a strong signal. I have tried all the usual suspect, rebooting, resetting etc 100 times.

View 9 Replies View Related

Connected To Router But No Internet

Jun 14, 2012

My computer will sometimes disconnect from the internet but not the router while i am surfing the web. so i have to go and disconnect and reconnect to the router which is kind of annoying especially if you are watching a video and you have to do it every min or so. the router is shared with xboxes, ps3s, like 5 or 6 computers, smart tv, phones etc and works fine with them but it seem my computer is the only one that has this problem.

View 2 Replies View Related

Some Sites Won't Load When Adsl Modem Tp-link Td 8840 Is Connected To Router Dlink Dir 61

Apr 30, 2011

i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Can't Show Videos / Images From Usb-hdd Connected To Router

Mar 29, 2013

Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n

I have a problem with the combination of the TP Link router and a samsung smart tv (Samsung UE46ES6300). Every thing works fine, but I can't show videos or images from a usb-hdd connected to the router (Media server is started)I can access the files with my windows pc and windows media-player. AND I can view content on the usb-hdd connected to the router, over allshareplay for windows and send it to the tv.But I want to show videos on the usb-hdd without my pc. I see the TP-Link Router as a source on allshareplay on the tv. When I click on it, there is a error message, that the request can't be executed.

View 2 Replies View Related

Cannot Access Internet With Router Connected

Oct 24, 2012

I have a cox modem and a liksys wrt54g router. I cannot access the internet to set up the router. I have followed all the required steps in hooking up the router.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved