D-link Dir-615 :: Router Can Be Connected Through Wifi But Not With Cable

May 10, 2013

i recently bought my dir-615 to hook up with my tp- td 8816 modem. After setting it up and successfully working one day, the router randomly stopped sending a WiFi signal. I restarted it twice and it began to work once more. I decided to install dd wrt build 21061 for my E3 dir -615 router. Unfortunately, i could not get it to work. I have dsl internet and my isp uses PPPoE. I used the option for the set up and filled out the appropriate information, but it would not work and the internet light on the router would turn orange.

Unfortunately i decided to play around with this router at the wrong time and the people in my house needed it. I decided to quickly re flash it by going into the emergency room(holding reset button during router reset until orange button starts blinking). However when i select the official d link firmware, it simply will not change. The page is stuck loading on the d-link emergency room page with no progression whatsoever. I tried the process 3 times already.

For some reason, i can connect to the router through WiFi but not through cable. When i connect through WiFi i am on the dd wrt firmware. I don't think i can return the modem to the store since it is clearly on DD WRT firmware.

I'm either looking for a solution to re flashing back to stock firmware, or making the internet work on the dd wrt firmware. The internet light turns orange when i select PPPoE on the set up...

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: E1200 Slow Wifi But Not When Connected By Cable

Aug 14, 2012

The wireless router, which is a linksys E1200 is completely new. I setup the entire wireless and there was no problems on that front.The problem is the wireless connection. Even when I am within a few inches of the router, I couldn't even load a youtube video properly. It buffers every 2 seconds. But when I plug the cable into my computer, it works completely fine. The signal strength is excellent all the time.

I tried using inSSIDer to look for the number of connections within my area for the one with the least inteference and found that I'm already on the good one, or actually, all of them looked more or less the same. But I tried changing anyways from 1 to 6 to 11, and none of them made a difference.I then tried changing my Wireless Security to WPA2 Personal. Then I tried changing the Wireless Network Mode to Wireless-G Only instead of Mixed and the wireless speed increased. 

View 5 Replies View Related

D-link Dir-655 :: Router Drops All Connections Once Connected Via Wifi To Specific Notebook

Jan 9, 2012

My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to  two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one

View 7 Replies View Related

Linksys Cable / Dsl :: Wag320n Web Interface Wifi Speed Of Connected Clients

May 11, 2012

Is there a way to know from the web interface the wifi speed of the connected clients?

View 1 Replies View Related

Cisco Switching/Routing :: 3850 - Link Light On But No Cable Connected?

May 8, 2013

I just completed installation of a stacked pair of 3850s in my datacenter.  While I was installing them, I noticed that the lights on ports 1-8 on one of the switches were on solid even though there were no cables connected to that switch.  I don't see anything in the logs or anywhere else in the CLI that indicate a problem, however the lights remain on.  This only happens on switch 1, not switch 2.  Once I plugged the cable into port 1, it flashes normally with activity, but 2-8 remain on solid even though nothing is connected to them.
 
Before I put the switches in place, I had configured them at my desk with the console connection, and those lights were not lit up.
 
The indicators on the front of both switches are set in STAT mode.  I thought initially I had hit the button and flipped it to a different mode, but that is not the case. 

View 5 Replies View Related

D-link Dir-655 :: Laptop Will Not Stay Connected Via Wifi

Jun 21, 2011

I installed the DIR-655 on my home network a couple weeks ago to replace an older model D-Link that failed.

I'm having trouble with my laptop maintaining a connection to the network ever since.

Details:
Firmware Version :     2.00NA , Wed, 12, May, 2010
Hardware Version: B1   
Desktop WinXP hardwired to router
Blu-Ray player hardwired to router
Dish Network received hardwired to router
Laptop Win7 wifi
Android phone wifi
CenturyLink DSL

It seems that the wifi stays up until I try to access the internet via the laptop. After a few seconds, the laptop will disconnect, and many times the router seems to reset itself, though not always. This does not happen when using a hard-wired connection. Using the wifi-enabled Android phone doesn't seem to affect the network.

Sometimes the wifi comes back up pretty quickly, but other times it does not. Earlier today, the internet globe light on the router turned from blue to amber. I had to reset the CenturyLink DSL modem for it to work again.

When the network goes does, I get a message on my desktop that a network cable is unplugged, and the network disappears from my available wifi networks that I can see with the laptop. Sometimes I get the "limited connectivity" message.

I have tried changing the 802.11 mode around, and I've changed from Auto Channel Scan to Channel 1. Neither of those have fixed the problem.

View 7 Replies View Related

D-link Dir-615 :: Wifi Not Connected Using Xperia Neo Phone

Nov 11, 2011

I have a wifi connection in my shared accommodation which I use to connect to my Laptop. Now that I have bought a new smart phone, I want to use this wifi with my phone as well. I have a Sony Xperia Neo mobile phone. When I entered the password in phone it said limited connectivity and was not allowing to open the webpages. So what I did was took all the settings of the Wifi like IP address, subnet mask, default gateway, dns 1 and dns 2, manually entered all these in the advanced setting. Now the phone is saying you are connected to the Wifi, But I am not able to open any webpages.

I have a DLINK _ DIR615 router

View 1 Replies View Related

D-link Dir-655 :: Wifi Does Not Give Signal Even When Connected

Jun 25, 2011

For some reason my router does not give internet but my laptop is still connected via lan wireless. This would be a problem for me because i always leave my laptop connected in the web at night

View 1 Replies View Related

D-link Dir-615 :: Ua600 - 815 Works Computer Connected Wifi Still Can't Surf Net

Jun 2, 2011

815 is setup & works computer is connected to wifi but I can not surf the net I am using a Amped UA600 usb adapter I have no idea why I still not not surf the net?

View 1 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd - Wifi Connected Tp Wds Bridge Loses Its Settings

Dec 17, 2012

Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :

I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.

View 4 Replies View Related

Cable Modem Connected To Multiport Router Do Not Allow Communication

Jun 22, 2012

I just moved into a new house.The house is wired with cat5e.my plan was to connect my cable modem to a multiport router. All of the cat5e cables will connect here. I planned on having my wireless router connect into a cat5e rj45 plug in the house. my laptop knows the wireless is there but it can't communicate.What do I need to do to allow communication?IP and subnet addressing

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 Ethernet Cable Not Connected

Feb 17, 2013

I'm using a refurbished WRT54G2 v1.5 router.  I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.

View 6 Replies View Related

Linksys Wireless Router :: 2 E4200s On Same Network Connected Via Cable?

Mar 28, 2012

I used to have this exact setup with 2 wrt610ns i believe was the model number, i have one at my house, connected to my dsl, and then another in my "man cave" connected by a approximately 250 foot buried outdoor cat6 cable, inside of conduit of course. Last week both routers along with my modem were fried during a storm, so now i rebuilt the network with 2 e4200s, i hooked everything up and b4 i even had a chance to set my network up like i had to do b4 (a 192.168.10.1 subnet in the mancave) everything was already getting internet, however i cannot access the web based setup for the 2nd router (mancave) the dhcp client table shows it with an address of 192.168.1.139. even if i disconnect, reset the 2nd router and set it up on a 192.168.10.1 address as soon as i connect it to the main router, it goes right back to the .1.139 ip address. the only problem i have with this is that i would like to have the freedom to change my wifi passwords or edit other settings on my network without having to disconnect from the main router everytime, assuming that will work and i wont have to do a hard reset in order to get the router back to a default ip. the cable connecting the 2 routers goes from a lan port on the 1st router to the internet port on the 2nd.

View 2 Replies View Related

Linksys Wireless Router :: E2000 - PS3 Error / Ethernet Cable Is Not Connected

Nov 19, 2011

Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router.  If I reset the cable modem, it will work for 10-15 minutes until it errors out again.  If I plug the PS3 directly into the cable modem, it works fine. I'm really confused. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems.

View 8 Replies View Related

Cisco Wireless :: Setup To 2921 Router Connected To Cable Modem

Apr 21, 2013

I have one interface setup to a Cisco 2921 router connected to a Cable modem.DHCP is on the 2921.when I connect to the ssid for my guest i'm redirected to the authentification portal 1.1.1.1 .i'm putting valide credential and when pressing the submit button .. it just go anywhere.
 
I have setup another SSID with a psk and it's working fine.. getting ip and able to browse internet.From what i have read... it's apparently DNS issue on my router.. but what should I check.

View 4 Replies View Related

Wifi Devices Can See Router But Not Connected

Jan 7, 2012

What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.

View 14 Replies View Related

Connected To Trendnet Router Via Wifi Connection?

Aug 21, 2012

My internet connection setup is: PC -> Trendnet 632 BRP wi-fi router (via Ethernet cable) - > D-Link DSL-2520U modem (via Ethernet cable, PPPoE) -> Internet. I have other devices connected to my Trendnet router via Wi-Fi connection (Notebook, PS3, XBOX, iPhone).My ISP gave me two DNS servers wich I have entered in my Trendnet. But when I look at the DNS tab in my D-Link I see two different DNS servers witch is not the same I entered in Trendnet.hey was set automatically when I created new DSL connection. I've also tried to leave the DNS adress tab as it was by default (0.0.0.0) in Trendnet router and after that my network still works normal. And when I look at the WAN status tab in Trendnet settings the DNS servers is set automatically to 192.168.1.1.So I have 3 questions for you:1) Do I really need to enter those DNS servers that my ISP gave me or I can just leave it to DHCP to manage them?2) If I have entered ISP's DNS servers in Trendnet then witch DNS servers is actually I'm using the ones my ISP gave me or the ones that my D-Link have picked automatically?

View 11 Replies View Related

Wifi Router Not Communicating When Connected To Lan Ports?

Oct 29, 2012

have the following set up: cable modem>wifirouter>gigabit ethernet switch>to 16 ports throughout house. When I connect a second wifi router to any port around the house, the internet does not work when connecting to that specific router, however, if I use a lan cable and connect direct with my mac or cpu, internet works fine. wifi routers are not communicating with LAN ports

View 9 Replies View Related

Linksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds

Jan 18, 2012

I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get  reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 - How To See Who Is Connected To Wifi

Jan 8, 2012

On the D-Link it was easy, I can see who is connected to which radio.But I can't figure out how to see who is connected to WiFi on hte E4200?I run several access points in my house, and I need to make sure htey are all working.If I can't see who, if any, is connected, I have no idea if WiFi on the E4200 is working.

View 2 Replies View Related

Netgear 600 Dual Band Router Connected To A DOCIS 3.0 Cable Modem - Downloading Speed Is Slow?

Mar 25, 2011

I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.

View 1 Replies View Related

Linksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?

Apr 23, 2013

With this modem, can you hook up to the Linksys Smart Apps WiFi?

View 2 Replies View Related

Linksys Wireless Router :: Devices Connected To E3000 Via Wifi But Not With Internet

Apr 21, 2013

My E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.

View 1 Replies View Related

Linksys E3000 Router / Ethernet Connection Is Dropping While Wifi Stays Connected

May 27, 2011

I have Comcast cable internet routed through a linksys E3000 router. My desktop is connected to my router via ethernet and my various other devices including my laptop are wifi connected. It seems almost at random that my desktop will lose its connection.Windows will show me as still being connected and my network connection will show a normal status until I atttempt to repair it then it will change to limited or no connectivity. Through all of this, my other devices all still have a wifi signal (I don't use more than 1 or 2 at the same time). I can reconnect to the internet by unplugging my ethernet cable then reuplugging it back in and my connection will start working again. I've also had several blue screens, and when I checked the dmp files it revealed my network card driver as the culprit, yet I have reinstalled and even clean installed the microsoft signed driver. I have also attempted to reboot both my modem and router to no avail.

Microsoft XP
Marvell Yukon ethernet adapter on a biostar mobo
C:Documents and SettingsMain>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sn1
Primary Dns Suffix . . . . . . . :

[code]...

View 5 Replies View Related

Linksys Wireless Router :: Wrt320n Wifi Connection Drop When Internet Connected

Oct 11, 2012

I have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad.  However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).

And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1

Wireless adaptor:  Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.

View 9 Replies View Related

Linksys Wireless Router :: E2000 Software Can't Find Sonos When Pc Is Connected Through Wifi

Aug 28, 2011

I bought a Sonos multiroom-system, and connected the first player to my E2000 router through Ethernet. It then gets a dynamic address through DHCP, I can see the Sonos within the network when looking in the admin tool of the router.When I start the Sonos controller software on my PC (XP), the software can not find the Sonos when my PC is connected through Wifi.As soon as I connect PC to the router with ethernet cable the Sonos is found immediately and can be initialised. After that, I can disconnect the cable and control the Sonos wirelessly. (as long as I don't close down the controller software for too long)
 
From what I understood from the sonos.com website, the Sonos sends an UPnP multicast signal on port for SSDP on port 1900 for initial connection. Further communications port are described below.Somehow, this multicast package seems not to be transferred into the wireless LAN, only into the wired LAN. Do I have to open some ports, filter some ports?Forward them?

View 2 Replies View Related

D-Link DIR-615 :: See Who's Connected To Router?

May 11, 2011

How do you determine who's connected to my wireless router?

I can see the "lan computers" section under the "device info" section under "status". It lists computers that were connected yesterday but have been powered down for at least 12 hours? Renew'ing or releasing the router doesn't update the list.

Also is there a way, from my router, to force a computer off my network?

View 1 Replies View Related

Split Ethernet Cable One To Computer Other To Wifi Router

Dec 13, 2011

I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.

I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.

View 7 Replies View Related

Linksys Cable / Dsl :: Wag320n Cascading Router Through Wifi

Feb 10, 2011

I need to connect 4 pc together and to the gateway (only one pc has wifi). i would know if it's possible to use one device like a router where i can wired the 4pc to put them in lan and use also this router to connect all the client to one gateway WAG320N.

View 3 Replies View Related

Linksys Wireless Router :: E1500 When Swipe Screen And Bring Them Back / Wifi Is Not Connected

Apr 8, 2012

I installed this Linksys E1500 yesterday and have had a problem keeping my iPhone 4 and an iPod Touch connected to WiFi.The devices go to sleep.  When I swipe the screen and "bring them back" the WiFi is Not Connected.  I have to go in and re-enter my network password again.  As long as the devices don't go to sleep, they maintain connectivity.  Once connected they function properly.
 
The iPad 2 & Samsung Galaxy S phone we have seem to be keeping their WiFi connectivity, as well as a G62 HP laptop running Windows 7, an older XP machine using a Cisco AE1000 wireless network adaptor and the Xbox 360.  The issue is just with the iPhone 4(ios 5) and the iPod Touch(ios 4).
 
I had issues with the iPad and the Galaxy phone until i disabled WMM Support in App & Gaming.I would bring this back to the retailer but I had it sitting on my desk for about 30 days and it's past their return policy.The firmware is up to date on the Router.  I've tried power cycling all the devices including the cable modem & the new router.

View 1 Replies View Related

D-Link DIR-825 :: Router Does Not Appear To Be Connected Properly?

Feb 11, 2013

So I have a DIR-825, I got from a family member as they didn't need it anymore. (Don't know if its under any warranty at all) I have a few different problems with it:

1. It doesn't install correctly. I insert the disc, the "Checking adapter enabled" finishes quickly and easy. Then the "Checking network status..." goes for about 30 seconds - 1 minutes and then I get the "Your new router does not appear to be connected properly." It gives the Follow these steps message of checking connections/resetting/etc, which I have done multiple times without success.

2. Despite the failed install, I DO get an internet connection. It starts to get weird though. I have 3 different connections currently connected to it with the following properties:

Modem>Computer (Wired) - 16 MB/Second
Modem>Router>Computer (Wired) - 3 MB/Second
Modem>Router>Laptop (Wireless) - <1 MB/Second
Modem>Router>iPhone (Wireless) - 13 MB/Second

I've tried looking through the options on my router but nothing looks like it will work .

View 3 Replies View Related

D-Link DIR-655 :: Router Not Connected To Internet?

Mar 23, 2012

had this same problem last year and by a fluke i was connected to the internet so my wireless printer could access web services but one of my computers connected to the router kept disconnecting from the internet so i had to change the settings now i want to try to get the router connected to the internet again.  my wireless network has no internet access so i know the router isnt connected to the internet but i am online right now through the router.  My ISP is AOL Canada.  I also had a message on the computer saying that the DNS server isn't responding.  Also my internet has no network access. Also i had the router set for DHCP NOT PPPoE or whatever its called.  also what DNS should i put for the setting  or do I need to put that on router setup page for the internet. Also is there any way of stopping the other computer from disconnecting from the internet once i get the router connected to the internet? One more thing on the taskbar at the bottom of the screen where the wireless icon is theres a yellow triangle with an exclamation mark in over it  how do i get rid of that  when i had the router connected to the internet last year the yellow triangle was gone.  And right now on the network map its showing an x through the line going from the router to the internet which i know means theres no internet from the router.

View 14 Replies View Related

Huawei 521i Router - Can Connect With Ethernet Cable But Not Wifi

Oct 15, 2012

I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved