D-link Dir-655 :: Wifi Does Not Give Signal Even When Connected

Jun 25, 2011

For some reason my router does not give internet but my laptop is still connected via lan wireless. This would be a problem for me because i always leave my laptop connected in the web at night

View 1 Replies


ADVERTISEMENT

Wireless :: Tp Link Td-w8901g Modem Receive Wifi Signals Through Wan And Give Out Through Lan

Jan 31, 2012

I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.

View 1 Replies View Related

No Internet Access In Sony Vaio Though Wifi Is Connected Showing Full Signal

Dec 19, 2012

I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.

View 1 Replies View Related

Tp-link Repeating A Weak Wifi Signal

Dec 13, 2011

I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.

View 3 Replies View Related

D-link Dir-655 :: Stops Broadcasting Wifi Signal

Jun 20, 2011

I bought a DIR-655 (F/W v. 2.00NA) about 6 months ago. It worked well until a couple of weeks ago. Then it started to stop broadcasting WIFI signal without apparent reason. When it did so, I could still connect to it and internet with wired connection, but the WIFI scan does not show my SSID. If I reboot it (either through the admin interface, or just disconnect and reconnect the power), I would be able to reconnect to WIFI, but then WIFI will stop working again in about 8-10 hours. I am rebooting this thing 2-3 times a days and it is very frustrating. Curiously, I borrowed a N300 router to try out

View 10 Replies View Related

D-link Dir-825 :: Increase Wifi Signal Strength With Software?

Apr 5, 2013

Even though I put high gain antennas on my routers which extended the range of good signal immensely, I wish to try to get even better signal strength also.   When using manual configuration mode on the router, I have set the WiFi power level to 100% (default level).  Is there a way to increase that level beyond 100% and "overdrive" the signal?  I tried to input a number >100% and that was not accepted.

I know this is possible if I go to dd-wrt, and possibly with open-wrt, which I prefer not to do for various reasons, not the least of which is that I have both a Rev. A1 and a Rev. B1 router (Rev. A1 is not supposed to support dd-wrt).  I also know that increasing the power will make the router run hotter.  I am willing to risk it as I monitor the temperature regularly.

Has anyone ever tried to do this or, have the people who want this just gone to dd-wrt?  From the dd-wrt forum it appears that the DIR-825 router in Rev. B1 is not very user friendly to dd-wrt.  After 3 years the code is still flaky.  I would prefer not to use it, if possible.

View 5 Replies View Related

D-link Dir-601 :: Varying Degrees Of Success With Wifi Signal

Jan 6, 2012

I just installed a DIR-601 cascaded with a WiFi G Netgear router.  The D-Link is handling DHCP.  I am having varying degrees of success with the WiFi signal.  One XP laptop gets anything between 80Mbps and 150Mbps (can change while sitting in the same location), while another Win7 netbook does slightly worse.  My Son's MacBook Pro never seems to do any better than 72Mbps.

I dedicated the D-Link to 802.11N and only allow these 3 devices to connect to it as N devices.  All other WiFi devices are G and use the Netgear G router.  I am using WPA2-Personal/AES and Auto bandwidth (40 does not seem to be a choice).Didn't experience such performance fluctuations with the Netgear G router.

View 14 Replies View Related

D-link Dir-655 :: Wifi Signal Will Stop Broadcasting Other Computers

Dec 25, 2010

I recently purchased a dir 655 router and it works fine but in after a while of using it, the wifi signal will stop broadcasting my other computers still work with the internet that are hard wired but the ones im using through the wifi signal will loose connection. So my fix has been unplugging the router and plugging it back in then it will broadcast my wifi again. I tryed leaving it plugged in and refreshing and rebooting my computers but that wont fix it until i disconnect the router and plug it back.

View 14 Replies View Related

Access Point Or Wifi Signal Booster / D-link Wireless N Gigabit Router

Jan 2, 2013

Got 1 Linksys WRT54G Router on the ground floor which uses PTCL DSL Internet and 1 D-Link Wireless N Gigabit Router on the first floor which uses World Call Cable Internet of my house. So yeah we have two internet connections.Getting weak signals from both of the routers in my room on the far left side of the house and little to no signals in the basementSo what I want to ask is that should I purchase better routers or should I go with a signal booster of some sorts like an Access Point or a Range Extender?Also is there such a device which would catch signals from both of these differently configured routers ( different internets, different wireless security keys etc ) and then boost them throughout the house if placed in an area where both the router signals are strong?

View 5 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd / Wifi Shows Good Signal But No Internet?

Apr 18, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : HughesNet

I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.

View 1 Replies View Related

Tp-link 150mbps Wireless :: Use Tl-wr700n Router To Share Wifi Signal In Hotel

Dec 28, 2012

Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version : latest
ISP : various

What would seem to be an ideal way to share a hotel wifi signal with other devices, would be:

Laptop signs into hotel/resort wifi and completes sign-in page. Share wifi signal with TP router via an ethernet cable. TP router acts as hotspot for connection by other devices. This is the method this Apple based article suggests:

[URL]

I have tried this with Windows 7 using a bridge between the laptop wifi and lan adapters. But I must be doing something wrong.

The other option is to use ICS, but not sure then if the hotel's system would see additional devices. (we are limited to 4 where we stay, but exceed that when family visits!)

View 9 Replies View Related

D-link Dir-655 :: Laptop Will Not Stay Connected Via Wifi

Jun 21, 2011

I installed the DIR-655 on my home network a couple weeks ago to replace an older model D-Link that failed.

I'm having trouble with my laptop maintaining a connection to the network ever since.

Details:
Firmware Version :     2.00NA , Wed, 12, May, 2010
Hardware Version: B1   
Desktop WinXP hardwired to router
Blu-Ray player hardwired to router
Dish Network received hardwired to router
Laptop Win7 wifi
Android phone wifi
CenturyLink DSL

It seems that the wifi stays up until I try to access the internet via the laptop. After a few seconds, the laptop will disconnect, and many times the router seems to reset itself, though not always. This does not happen when using a hard-wired connection. Using the wifi-enabled Android phone doesn't seem to affect the network.

Sometimes the wifi comes back up pretty quickly, but other times it does not. Earlier today, the internet globe light on the router turned from blue to amber. I had to reset the CenturyLink DSL modem for it to work again.

When the network goes does, I get a message on my desktop that a network cable is unplugged, and the network disappears from my available wifi networks that I can see with the laptop. Sometimes I get the "limited connectivity" message.

I have tried changing the 802.11 mode around, and I've changed from Auto Channel Scan to Channel 1. Neither of those have fixed the problem.

View 7 Replies View Related

D-link Dir-615 :: Wifi Not Connected Using Xperia Neo Phone

Nov 11, 2011

I have a wifi connection in my shared accommodation which I use to connect to my Laptop. Now that I have bought a new smart phone, I want to use this wifi with my phone as well. I have a Sony Xperia Neo mobile phone. When I entered the password in phone it said limited connectivity and was not allowing to open the webpages. So what I did was took all the settings of the Wifi like IP address, subnet mask, default gateway, dns 1 and dns 2, manually entered all these in the advanced setting. Now the phone is saying you are connected to the Wifi, But I am not able to open any webpages.

I have a DLINK _ DIR615 router

View 1 Replies View Related

D-link Dir-615 :: Router Can Be Connected Through Wifi But Not With Cable

May 10, 2013

i recently bought my dir-615 to hook up with my tp- td 8816 modem. After setting it up and successfully working one day, the router randomly stopped sending a WiFi signal. I restarted it twice and it began to work once more. I decided to install dd wrt build 21061 for my E3 dir -615 router. Unfortunately, i could not get it to work. I have dsl internet and my isp uses PPPoE. I used the option for the set up and filled out the appropriate information, but it would not work and the internet light on the router would turn orange.

Unfortunately i decided to play around with this router at the wrong time and the people in my house needed it. I decided to quickly re flash it by going into the emergency room(holding reset button during router reset until orange button starts blinking). However when i select the official d link firmware, it simply will not change. The page is stuck loading on the d-link emergency room page with no progression whatsoever. I tried the process 3 times already.

For some reason, i can connect to the router through WiFi but not through cable. When i connect through WiFi i am on the dd wrt firmware. I don't think i can return the modem to the store since it is clearly on DD WRT firmware.

I'm either looking for a solution to re flashing back to stock firmware, or making the internet work on the dd wrt firmware. The internet light turns orange when i select PPPoE on the set up...

View 3 Replies View Related

Linksys Wireless Router :: E4200 Can Give Wifi And Lan Together

Jun 26, 2012

I have a non linksys modem router with wifi capabilities.I want to connect wirelessly the E4200 with my modem/ router ... After that, I want to be connected ONLY to the E4200, wirelessly and wired TOGETHER to have internet to my desktop pc (via lan cable) and to my wireless clients (via wifi).

View 6 Replies View Related

D-link Dir-615 :: Ua600 - 815 Works Computer Connected Wifi Still Can't Surf Net

Jun 2, 2011

815 is setup & works computer is connected to wifi but I can not surf the net I am using a Amped UA600 usb adapter I have no idea why I still not not surf the net?

View 1 Replies View Related

D-link Dir-655 :: Router Drops All Connections Once Connected Via Wifi To Specific Notebook

Jan 9, 2012

My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to  two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one

View 7 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd - Wifi Connected Tp Wds Bridge Loses Its Settings

Dec 17, 2012

Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :

I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.

View 4 Replies View Related

D-Link DIR-655 :: How To Give Priority To Wireless Connection

Jan 1, 2011

Just got the DIR-655 and was wandering how to prioritize the wireless connections, that way my future mother-in-law across the street will be last. I can get the Static IP for a computer, but when I go into the router settings for QoS, I don't understand what info goes in there.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8901G / How To Give HTTP Connections Higher Priority

Jan 10, 2013

Model : TD-W8901G
Hardware Version : V3
Firmware Version : 3.0.1 Build 100901 Rel.23594
ISP : Ttnet

My web browsing/surfing speed decreases when I'm transferring files between other computers which are connected to this modem, and when a torrent client is downloading from 20+ seeds. I want to give the HTTP connections (port 80) the highest priority possible, so that my connection wouldn't delay when non-HTTP connections are active.The interface of the modem related to QoS settings are as below:What QoS settings should I enter (what rule(s) should I define) for giving HTTP protocol higher priority?

Information about my environment:

Modem product ID: TP-LINK TD-8901G
Modem firmware version: 3.0.1 Build 100901 Rel.23594
Modem hardware version: 3.1
My OS: Windows 7 Ultimate x64 SP1 My physical port: Enet1 (Eternet #1)
My local IP: 192.168.1.2
My torrent port: 5002
IP of the computer I'm transferring files between: 192.168.1.4
Physical port of the computer I'm transferring files between: Enet 2 (Eternet #2)

View 2 Replies View Related

Tv Has No Signal When Connected A Vga Cable To The Computer?

Aug 31, 2012

The only thing hat worked for me was to update the vga driver. Restart the computer and ready to watch everything you want in your tv.

View 1 Replies View Related

Connected To Clear Lose Signal Every Few Seconds?

Jun 26, 2011

Connected to "clear" lose signal every few seconds-WHY! just lost my signal again!

View 2 Replies View Related

Sony Vaio SVE1512B1EW Is Connected To Full Bar Signal Network But Won't Work?

Dec 25, 2012

I have a Sony Vaio SVE1512B1EW and have connected it to my wireless. Works absolutely fine. However recently whenever I turn on my laptop the Internet will work for 2 minutes and then not work, even though it says its connected at full bar signal. When this happened again I tried the Internet on a different laptop and found that it is not the wireless! What will I do? It's telling me there's a connection but not working?

View 3 Replies View Related

Linksys Wireless Adapters :: E2000 / Signal Strength Drops To 50% When Connected

Jan 2, 2012

I have the following problem:
 
Adapter: WMP600N
Router: E2000 (N-only)
OS: Windows 7 X64
 
When I'm not connected to my wireless network, the signal strength is 4 bars (out of 5)Once connected, it drops to 2 bars. Speed is 39 Mbps. Why?I have updated the drivers (strangly, it says the drivers are from Ralink Technology. Corp, version 3.00.00.0041 built by: WinDDK)

View 4 Replies View Related

Any Way To Boost Wifi Signal?

Feb 20, 2011

I have a wireless router that rests across the house next to the modem. The signal is too weak to reach to the other side of the house. Is there a way to boost the signal so I can get wifi from across the house or any other way to get an internet connection without several fifty foot wires going across the house?

View 1 Replies View Related

Wireless :: Cannot See Wifi Signal

Jan 20, 2013

I want to connect myself on my friend router by wifi but i cannot see the network what should i do ,what usb receiver anntena is the best or what i nedd to buy and is working 100 % maybe is 400 meter is the distance but sure is not 1 mile

View 1 Replies View Related

How To Get A Better Wifi Signal For Gaming

Jun 16, 2011

i get a bunch of lag when i play counterstrike, etc. In game, my ping is always tripling other players'. I know it isnt my computer because it is basically amazing. Im pretty sure it is my wifi because i'm in the top floor of my house and my router is in the basement. I'm using a usb wireless card. What can i do to get a better signal.

View 1 Replies View Related

How To Get A Stronger Wifi Signal

Apr 15, 2012

My parents ditched their Comcast cable last year. Their house association has provided 'Wifi' for everyone in the neighborhood as part of the association fee. However, signal is very weak, even though they are one of the closest to the Wifi Antennas. They have a laptop, two desktops, and one Ipad. Their laptop seems fine. Both of the desktop, however, are very slow. It's slower than 56k. It's almost unbearable. They still have all their modems/router from Comcast. I am wondering a way to get the Wifi signal, and use the Comcast Router to create a Wifi in their house again so they can print wireless and use netflix and things like that. I don't know the exact definition for it. I'm just wondering if it can be done.

View 3 Replies View Related

Convert Wifi Signal To Lan?

Dec 13, 2012

Convert Wi-Fi signal to LAN?

View 2 Replies View Related

Strong Wifi Signal / No Connection

Aug 28, 2012

I just got a job at a School district that has an extremly old and basic network setup (No Firewall, only 2 accounts on the server Student and Teacher). They have two small buildings that have 1 wireless router on each floor about in the middle of the hallway. I am having a strange issue I haven't seen before with a windows 7 laptop that a few of the teachers in the district are having. They can see the wireless router on the network but everytime they try and connect it says "Windows Cannot Connect or is Denied Access". All the other laptops in the building connect fine.Heres what I have done so far.

-Power cycled the router, nothing.
-ipconfig /release, and renew, nothing.
-Getting closer to the router and connecting, nothing. (Also tried with a differant laptop in the room and it could connect no problem which confused me more)
-Updating the network card.(says it has the latest updates)
-Re-entering the network key, nothing

What I haven't tried is setting up manually a static IP. But do I need to do that? And if so how do I know which IP to give it is there a way I can generate a list of all the IP's on the network?

View 2 Replies View Related

Ps3 Networking Poor Wifi Signal

Nov 11, 2012

went to set up ps3 and see that the wifi signal is particularly bad (30%) for online.There is no possible way of getting the router near the ps3.I am think that a pair of tp-link powerlines may play a role here, but may be mistaken. What are peoples experiences. would something like that increase ps3 signal? would 200mbps or 500mbps be better (they do diffferent models). I understand that it would make the connection for the ps3 wired, but am I right in thinking the laptop would just operate over wifi as it does already?

View 2 Replies View Related

Laptop Wifi Signal Booster?

Feb 7, 2013

I have a laptop with a Bigfoot 1103 n wifi card and up til now it has been working perfect for our location.cWe had to move our office down a few doors and now we get NO reception at all. My laptop will pick up the network momentarily then loose the signal. My question is : how to boost reception?I have no access to the modem or router either. Do they make a decent booster that I can plug in my usb that will work with my current wifi card?

View 2 Replies View Related

How To Increase Wifi Signal Strength

Jun 3, 2012

I have computers scattered across our home, and in many areas it is not feasible to run ethernet cable. At one location (less than 30 feet away) but through multiple walls, I can barely connect to any POS (I have two). I added a stand alone antenna extension with long antennas on both the router and the WiFi card on the PC, however, this made zero improvement.What should I be looking to purchase to increase the signal strength? I've already tried different routers.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved