Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.
Region : Argentina Model : TL-WR1043ND Hardware Version : v1
my router is dead after my try of dd-wrt. it just flush 4 led and not respond. can i restore it connected rs232 or jtag? of cause know that it is not warranty at all, just need some diagram or something.
Region : Austria Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.4 Build 110429 Rel.36959n
I have a problem with the combination of the TP Link router and a samsung smart tv (Samsung UE46ES6300). Every thing works fine, but I can't show videos or images from a usb-hdd connected to the router (Media server is started)I can access the files with my windows pc and windows media-player. AND I can view content on the usb-hdd connected to the router, over allshareplay for windows and send it to the tv.But I want to show videos on the usb-hdd without my pc. I see the TP-Link Router as a source on allshareplay on the tv. When I click on it, there is a error message, that the request can't be executed.
Region : Canada Model : TL-WR1043ND Hardware Version : V1
I was wondering if it is possible to connect two routers through wireless and make them talk to each other. Here is why I need it, I currently Have 6 wireless IP Cameras going too 8. 2 are wired on one router in my house and the other 4 are wireless(with wired capabilities) Im going to wire the other 4 too a 2nd router so the cameras are always running and don't suffer any down time due to signal loss (happening a lot at the moment). How can I get Router B to talk to Router A, so I can look at all of the cameras from Laptop in my house which is closer to Router A.
My Router A is TL-WR1043ND, I'm also going to probably buy another one. How to configure it properly. So I can login to the cameras from my laptop.
Region : Netherlands Model : TL-WR1043ND Hardware Version : v1 Firmware Version : V1_120405 ISP : UPC
After buying and installing i get no wlan/wifi connection.I do have internet by ethernet, the laptops and ipad sees the wlan/wifi but get no connection? Resetting re-installing manualy or with the wizard doesn't work.
Region : Netherlands Model : TL-WR1043ND Hardware Version : Not Clear Firmware Version :
I installed my brand new TP-Link router and both wired and wireless internet connection work perfectly fine. But when I tried to secure the wifi with a password (I followed the instructions on last page of installation guide) I can not connect to the internet any more. After entering the correct password, both iphone and mac-book simply say "unable to join the network". I selected WPA2-PSK-personal as recommended. For now I switched off the security settings, but I live in a building with many neighbours and they are now consuming most of my bandwidth (apparentlyI am surrounded by illegal downloaders
Region : UnitedStates Model : TL-WR1043ND Hardware Version : Not Clear Firmware Version : ISP : HughesNet
I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.
Region : Belgium Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.12 Build 120405 Rel.33996n ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11 Mode: 11bgn mixed Channel width: Auto Max tx rate: 300Mbps Wireless router radio and SSID broadcasting enabled
Region : Romania Model : TL-WR1043ND Hardware Version : V1 Firmware Version : latest ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
I tried to connect a WD MyBook Essential 3tb hdd NTFS, but it never recognized it. Of course, I connected it with the external power supply.With a 15gb pendrive FAT32 it works OK.
Region : Russia Model : TL-WR1043ND Hardware Version : v1 Firmware Version : ISP :
Region : Russia Model : TL-WR1043ND Hardware Version : v1 Firmware Version : wr1043nv1_ru_3_13_10_up(120614) ISP : netbynet
Connection to a router on a cable speed of dowstream-50MBit/s, upstream-3Kbit(!) wifi-dowstream-50MBit/s, upstream-3KbitA cable directly in the personal computer to 70 Mbps there and back.Measured speedtest.net, and as [URL] The matter is that even elementary with an investment it is impossible to send mail - I am connected by different devices-2 of the laptop and 2 smartphones - the same. Technical support of provider already talk sense only in a router. Insertions updated, changed - the same( Firewalls are disconnected, any more don't know what to do and where proceeding speed and all digs-is killed. Russian forum TP-Link is idle.
Region : Austria Model : TL-WR1043ND Hardware Version : v1 Firmware Version :
unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.
Region : Argentina Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.12
I just got one of these to replace my old wrt54g. Seems to me a lot of people are flashing theirs with dd-wrt or openwrt. I was wondering why exactly. Unlike the old wrt54g, the tp-link stock firmware supports a lot of features in my view, especially the so wanted QOS. Do the CFW give the wr1043nd more stability or maybe better performance? Or is it about features? What features a CFW would add to the stock fw?
Region : UnitedKingdom Model : TL-WR1043ND Hardware Version : v1 Firmware Version : ISP :
My house has thick internal walls, so WiFi does not propagate easily. I am fortunate to have FTTP. Therefore I have the following setup: At one end of the house there is a Genexis HRG1000 Fibre Optic Modem / Router with WiFi and 4 ethernet ports. One of its ethernet ports links to a Devolo 200Mb homeplug and there is a matching homeplug at the other end of the house which is linked to a WR1043ND. We have tried two configurations each with various settings. If we link into the WAN port it creates a separate network which cannot be seen from the fibre modem end (since the 196.168.1.n addresses are non-routing) and although this works, we cannot stream / transfer files from the PC (connected to the fibre modem by ethernet) to the smart TV connected to the WR1043ND. The TV can "see" the internet and things like iPlayer work. Various other gadgets can connect either by ethernet or WiFi and get successful internet access. Alternatively If we link into one of the LAN ports, AND disable both the DNS service and the DHCP server in the WR1043ND it all appears as one network, but although it is disabled, all the gadgets and computers try to use the DNS in the WR1043ND rather than that in the fibre modem and consequently there is no internet connectivity. We have tried several combinations of fixed and dynamic IP addresses, rebooting the WR1043ND and the PC etc. but nothing seems to work. What does work is giving both WiFi routers the same SID and password so that moving from one part of the house to another with, say, a smart phone transfers what connectivity there is seamlessly.
Region : Others Model : TL-WR1043ND Hardware Version : V1 Firmware Version : ISP :
I got a TL-WR842ND to try and decide if i want to buy it. I want to connect a usb hub with 5 printers connected to that hub and use it as print server, would that work at all?
Region : Germany Model : TL-WR1043ND Hardware Version : V1 Firmware Version : ISP :
my new TL-WR1043ND. I've just installed the usb print driver for my HP PSC 2355 and it works fine for the PCs.Currently i'm wondering if i have any chance to also print using my iDevices (iPhone & iPad) in an AirPrint like way? The devices are connected via WiFi.
Region : UnitedKingdom Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 1.4.0 Build 111130 Rel.55990n ISP : Titanadsl
My router is a TD W8960N v3 which isn't listed here.I've connected a Synology 110j to the router and need to sort out the port forwarding which I'm not much good at. I am finding the TP Link documentation. I did find the page on DMZ but I don't know what that is.
Region : Argentina Model : TL-WR1043ND Hardware Version : V1
I own a TL-WR1043ND. Until recently it has been working like clock work but after a power cut it seems to have lost its settings. Currently there is a WiFi network: both my iMac and my MacBook Pro manage to create a network between them and i can access / transfer files from one to the other without any problems what so ever. My Gmail app on my iPhone also updates emails on this same network. But when i try to browse the web on both Safari or Firefox or check my email on Mail (OSX email client) I am not being allowed to do so. Its as though there is not internet connection. The same thing is happening to my wife when she is using her Nexus 7.
Unfortunately i have lost my DVD with the setup files and I am there for not managing to access the settings of the router. I have tried searching the web to find the downloadable software but it turns out the only ones that i found are for Windows only.The only way to access the web and update my emails etc is when i connect to the modem via Ethernet cable.
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 ISP : Comcast
I'm sort of used to everything failing every 2 days when a new device shows up due to the DHCP timeout issue that I've posted a workaround to. However, after rebooting everything, NOTHING worked. At all.I could get to the Admin page too.The DHCP address to my Comcast modem was 0.0.0.0 etc.The TP-Link "Detect" feature started saying Comcast was issuing me a "Static IP" instead of "Dynamic".Now, I can get an address from the Modem to my PC.So I cloned the PC's MAC ID.If I reboot the TP-Link 5 or 6 times, it might pick up the Comcast IP once, but no routing happens to the internet.I did try putting the static IP address into the TP-Link to see if I could fake it into getting online temporarily, but no.
And... after hours of troubleshooting last night, the router will not hand out DHCP addressed to any LAN equipment any longer either.Even, if I plugged in my laptop (which worked on the Comcast modem), the IP address it received from the TP-Link was the Comcast Public IP!Not a NATed / DHCP IP address! so I Factory Reset the TP-Link via the Admin page AND via a paper clip at least 4x.There were also no thunderstorms. Both the router and the modem are on a UPS / surge protector.The house is not (usually) haunted.I did try the new Beta firmware but that didn't fix anything.I also "upgraded" to DD-WRT.
Region : Argentina Model : TL-WR1043ND Hardware Version : v1 Region : Canada
I have a T L-WR1043ND v1.9 with the latest factory firmware that I recently purchased. Ran fine for a couple of weeks. Now my WAN connection seems to be dropping. I get an IP and DNS from the ISP but I cannot ping anything (google etc...) past the router. I have to hit the detect button or release and renew the IP in order to gain access. Then after a few hours or a day the issue reoccurs.
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta) ISP :
I have tried to go through the tech support email but no dice. My router disconnects every two days. The sys light will stay solid and require a reboot and my computer connected to the router will be unaffected . I have a 30mb connection with only 2-3 wireless clients on at the same time as the wired. The response I got from tech support email after waiting almost a week without a response was :
Because there's not much we can do to fix the problem right now and TL-WR1042ND is more competent for your network, I suggest you to change for it.
If you still don't wanna change for TL-WR1042ND, change for a new TL-WR1043ND to have a try."
This is answer I get after already asking once why they want me to downgrade for a different router . What exactly the TL-WR1042ND is going to do for me that the one I have won't,but I cannot get a answer.I have no idea what they mean by "competent ", I don't believe my network is anything special and see no reason why the problem would be fixed by downgrading . This is the second router since December I have had and really dont feel like paying another 15$ shipping back to newegg for a refund.
Region : UnitedKingdom Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.12 Build 120405 Rel.33996n ISP : Plusnet
I'm on a fibre connection from Plusnet and bought the TL-WR1043ND because of the advertised ability to use PPTP VPN to connect to my work server (the supplied Plusnet router doesn't allow it and is locked down).However, I cannot connect via PPTP VPN on this TL router either. I know my VPN settings are correct and I have had a brief search and found others have this problem, but short of installing third party firmware on the router, how to get this router running my PPTP VPN?
Region : Argentina Model : TL-WR1043ND Hardware Version : V1 Firmware Version : TL-WR1043ND_V1_130325 ISP : Ip dinamics
It worked correctly 2 days and 16 hours.Now, does not surfing in internet.although I can go to web interfaceI turn the gargoyle.The developers of TP-Link me tired
Region : UnitedStates Model : TL-WR1043ND Hardware Version : Not Clear Firmware Version : ? ISP : Guadalupe Valley Telephone Company (TX)
I am a bit of a noobie and am considering buying a TL-WR1043ND router/access point, but I have read that this router will not connect directly to my ISP over DSL.I have fiber optic to my home from a local telephone company. Whether it will or will not act as the gateway to the Internet. If not, does it connect to another router that acts as a gateway to the Internet? Or what?Secondly, do you recommend this model which, considering features, appears to be good value at arount $50, but would like to know what others think about it.
Region : Others Model : TL-WR1042ND Hardware Version : V1 Firmware Version : TL-WR1042ND_V1_130117 ISP : Optic konvertor DHCP mod
I bought TL-WR1042ND and I have problem. After 2 hours, the router loses all connections. Lights that everything is OK, but he can not connect to any site on the Internet or LAN. Even nor to 192.168.0.1 Only search for the host.
I have a DHCP internet. DNS 8.8.8.8 I disabled firewall and all I do not need, but nothing worked.
Region : Sweden Model : TL-WR1043ND Hardware Version : v1 Firmware Version : TL-WR1043ND_V1_120405_ ISP : Tele2 (fiber)
I recently bought your router and I am trying to install it.The problem that I get is that when the router tries to get the dynamic IP from my provider, it gets nothing.I have typed in the DNS servers but no go. Without the router, my uplink works fine. The provider does not lock onto a specific MAC adress.
Region : Malaysia Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.13 Build 120605 Rel.38634n
The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.
Region : Austria Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.4 Build 110429 Rel.36959n ISP : TPG
I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 Firmware Version : 3.13.12 Build 120405 Rel.33996n ISP : Comcast
Why am I unable to "disable" the UPnP in my TP-LINK TL-WR1043ND wireless router? When I click on the "disable" button nothing changes. I click on the "disable" button that then click of "refresh" and it still doesn't change to disabled.
Region : UnitedStates Model : TL-WR1043ND Hardware Version : V1 Firmwar Version : ISP : AT&T
I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.
