Tv Has No Signal When Connected A Vga Cable To The Computer?
Aug 31, 2012The only thing hat worked for me was to update the vga driver. Restart the computer and ready to watch everything you want in your tv.
View 1 Replies
ADVERTISEMENT
Linksys Cable / DSL :: Why WAG120N Gave Same IP To Two LAN Connected Computer
Jun 16, 2011WAG120N firmware 1.00.12.I'v connected two computers by Lan ports, and set it on DHCP. The device gaved the same IP to the both of them. so none of them can see each other in network. Its wired to me because none of them have problem with this and both can connect to internet!How could this be possible? how can i repair this network to share computers?
View 4 Replies View RelatedLinksys Cable / DSL :: WAG160N-AU LAN Computer Cannot Ping Computer
Oct 8, 2008I just got a WAG160N-au, I run the installation disk, follow the procedures. I got the internet connection.
View 9 Replies View RelatedConnected To Clear Lose Signal Every Few Seconds?
Jun 26, 2011Connected to "clear" lose signal every few seconds-WHY! just lost my signal again!
View 2 Replies View RelatedD-link Dir-655 :: Wifi Does Not Give Signal Even When Connected
Jun 25, 2011For some reason my router does not give internet but my laptop is still connected via lan wireless. This would be a problem for me because i always leave my laptop connected in the web at night
View 1 Replies View RelatedComputer Cannot Detect Wireless Signal?
Jul 3, 2012wireless works on other household computer, but not the Sony Vaio
View 1 Replies View RelatedRe-connect Home Wireless Signal To Computer?
Apr 9, 2012how to re-connect my home wireless signal to my computer. The wireless signal is strong and the other computers in my house will connect with no issues. My computer connected with no problems to my wireless signal at work. I am running Windows 7 Home Premium on a Lenovo Idea Pad Win7 PC. The computer was connecting yesterday and then was shut down. The next time I got on, ,it wouldn't connect. I've tried re-establishing the network as a new network, but it says the network already exists. The profile is the same as our other computers and nothing has been changed there. When I disconnect from the wireless signal and ask to re-connect it says that the it is trying to connect, but can't make the connection. I'm looking for any way to re-build the profile so it will connect and work again.
View 9 Replies View RelatedComputer Loses Signal Unless Very Close To Router?
Sep 28, 2011About a week ago my laptop started acting strange. I noticed when I brought my computer to my room (which is where i usually use my computer) it said that there were connections available where the signal bar is. Which is odd because it usually just auto connects. So i clicked on the signal bar and connected to my internet, but it lost the connection shortly after so I clicked connect again and it said windows was unable to connect to the router. Then shortly after that it said no connections were available. So i brought the computer to the computer to the family room ,where the router is, to check the router. It was nothing wrong with the router so I looked back at the computer and it was automatically connected to the internet with a five bar connection, but when i left the family room with the computer it immediately lost the signal. So i decided i should just stay in the family room. The next day the same problem occured and i went back to the family room to use the computer but i noticed the connection wasnt usually at five bars like it usually is wen im that close to the router but it was 4 bars or 3.
The next day i went over my fathers house for the weekend, and when im over there i pretty much always have a five bar connection even though im not in the same room as the router because im 1 floor directly above the router. Now when i used the computer over my dads house it had a 3 bar connection, disconnected from the internet at times, and when i try to connect bak it said that windows could not connect to router like it had said in my room bak at my own house, even though it always used to have a very high connection before this problem happened. So wen i got bak to my house i went to the family room to connect to the internet and now im having the same problems i had over my dads house. Now i try deleting some programs to see if they affected the internet and have even turned off some start off services on using mpconfig but that didnt work either
Converting Wireless Signal To Wired With Computer?
Jan 18, 2011My desktop computer doesn't have a wireless card in it. i also have a laptop which does have a wireless card. I was wondering if there is a way i can take the wireless connection and re-transmit it to the desktop through ethernet. I have a 5-port switch. I don't really know much about networking. but i am knowledgeable in computers. laptop has windows 7 on it. i really would prefer to not buy a wireless card for the desktop.
View 2 Replies View RelatedCat5 From Computer Receiving Wireless Signal?
Jul 18, 2011I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?
View 8 Replies View RelatedComputer Cannot Get Signal - Network Security Key Required?
Nov 14, 2011I have Clear service but there is one area that I cannot get a signal and need the network security key. I have windows 7, where do I find this security key?
View 2 Replies View RelatedWireless Signal Is Detected But Computer Doesn't Connect
Apr 6, 2011I have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.
View 3 Replies View RelatedComputer Forces Modem To Lose DSL Signal Repeatedly
Jun 24, 2012So i have AT&T dsl internet. but whenever i connect my computer wirelessly to the modem and get on the internet it repeatedly loses dsl connection every some odd minutes. the dsl light on my modem turns off, then blinks red, then fixes itself for five or so minutes until the cycle restarts. ive tried 2 wireless usb adapter and 1 internal wireless card. none have worked at all. but if its wired with an ethernet cord it works fine. we also have 2 other laptops that connect wirelessly and work fine. i dont understand what would cause this solely on my computer. ive also had AT&T come to my house and look at it and they said its fine, the issue is somewhere in my computer messing with the modem.
View 1 Replies View RelatedChange Network Icon From A Computer To Signal Bars?
Oct 13, 2012change the network icon to the icon that shous the list of networks available with the strength bars
View 1 Replies View RelatedSony Vaio SVE1512B1EW Is Connected To Full Bar Signal Network But Won't Work?
Dec 25, 2012I have a Sony Vaio SVE1512B1EW and have connected it to my wireless. Works absolutely fine. However recently whenever I turn on my laptop the Internet will work for 2 minutes and then not work, even though it says its connected at full bar signal. When this happened again I tried the Internet on a different laptop and found that it is not the wireless! What will I do? It's telling me there's a connection but not working?
View 3 Replies View RelatedLinksys Wireless Adapters :: E2000 / Signal Strength Drops To 50% When Connected
Jan 2, 2012I have the following problem:
Adapter: WMP600N
Router: E2000 (N-only)
OS: Windows 7 X64
When I'm not connected to my wireless network, the signal strength is 4 bars (out of 5)Once connected, it drops to 2 bars. Speed is 39 Mbps. Why?I have updated the drivers (strangly, it says the drivers are from Ralink Technology. Corp, version 3.00.00.0041 built by: WinDDK)
Long Distance Cable - Signal Dropping?
Oct 29, 2012Our house is located up a hill and a long way (1,400ft) from the main road and we always have problems with the signal dropping on our cable internet connection. According to the line tech's that have been to our house the problem lies with the 20+ year old cable that is being used to get the cable signal from the road box to the house
I am wanting to replace that cable but from what i have read so far is that cat 5/6 cannot go the distance i require
I have looked into going with a long range wi-fi but there is no direct line of site from the road to the house and there are a million tree's in between us and the road so its not really practical .we are not needing any major amount of speed, just enough to do surfing, streaming, and the kids like to do multiplayer gaming. 7-10mbps would be great for us, before we started having problems with the cable we were only getting 4-5mbps and that was enough for what we needed
Linksys Cable / DSL :: CM100 Not Finding Signal?
Oct 29, 2008I had a surfboard 4200 (motorola) and it worked fine for quite a few years but the speed would drop down for some reason every now and then (majory, from 250 KB/s to 50 KB/s). I bought a CM100 linksys but when I plug it all in it never finds the signal, the motorola still connects fine. I had the ISP delete my modem profile but it still wont connect, it wont even find the signal.
View 9 Replies View RelatedLinksys Cable / DSL :: WAG120N And AE1000 PC Bus Signal Is Low
Jul 11, 2012i have a problem whit Modem Router WAG120N and linksys AE1000 router is 5 meter my pc bus signal is low
View 1 Replies View RelatedLinksys Cable / Dsl :: X3000 Wifi Getting Low Signal
Nov 27, 2012I've bought X3000 modem recently & the only issue is pops up for me is wifi signal is too low. I've got 2 routers with me. My old linksys router WAG200G has got no issues with wifi signal. I kept both routers at the same place & compared with same standard channel yet what astonishing me that WAG200G has got more stability than X3000 regardless inspite changing to wireless -N. Is there a way to solve it. Btw, I tried all the standard channels yet it doesn't make any difference.
Firmware Version: v1.0.01.
No Internet Access In Sony Vaio Though Wifi Is Connected Showing Full Signal
Dec 19, 2012I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies View RelatedNetgear Cgd24n V2 Cable Wifi Signal Strength Low
Dec 2, 2011The signal strength usually shows low or very low. I`ve been changing the channels through 1,6,11, but it doesn`t change the signal strength. My modem is a Netgear CGD24N v2. The computer operates ok but i`d like the signal strength to show better than low.
View 12 Replies View RelatedLinksys Cable / Dsl :: Wifi On Wag54g2 Performs Very Bad When Signal Is 2 Out Of 5 Or Less
Feb 11, 2011I'm facing a strange problem here with my WAG54G2 gateway. I've got a very bad connection when the signal strength is 2 out of 5 or less. I tested the DL and UL speed via url...and gives me hardly 1 Mb/s even though I have 10Mb ADSL connection. With wired and wireless connection with 3 out of 5 or more I got 8.7 Mb DL from the mentioned website.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG54GS Sudden Signal Drop?
May 21, 2011I'm using a WAG54GS 1.0 router with up to date firmware, and signal around the house has always been fine, yet today it has suddently dropped to a VERY limited range - I'm sat right next to it now on a laptop and the signal is 2/5 bars - "fair".I've reset factory settings yet to no avail, I can't even get signal in the next room!
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120n Having Very Poor Signal Strength
Jun 7, 2010I have a linksys router WAG 120n and when using wireless if I move into the next room the signal strength goes down to 40% there is only one single wall in between the room and the router. I have upgraded the firmware to the latest version turned off other electrical devices changed the wireless channels but none of this has worked. Any more settings I can try to get the signal stronger, I really don't want to return the router unless completely necessary.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54G - See Signal But Can't Connect With Computer Or Iphones?
Oct 17, 2011I am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR841N - Get No Signal / Internet Connection On Computer
May 14, 2013Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
Connect LAN Port Cable To Desktop To Grab Wireless Signal?
Jul 4, 2012I have a LAN port cable, and I have one end connected to the back of my router.Where does the other end go, so I can receive wireless internet connection of both my Toshiba Satellite Laptop, and Gateway Desktop. First I had the LAN port cable connected at the back of my router, and the other end was connected at the back of my desktop. A little green light lit up at the back of my desktop, saying that it was grabbing signal. I could use the internet fine, and my laptop could grab wireless signal fine as well. I was missing around my router, trying to see what mark it was, and the LAN port cable came off, and when I plugged it back in, i couldn't receive signal, and neither could my laptop. Now the only way I can grab signal is by connecting the WAN port cable from my modem to my desktop, which means I cant get wireless signal on my laptop. Now when I do connect my LAN port cable to the back of my desktop, I try connecting to my wireless connection, and when I go to Network and Sharing Center, it says Connected (With full bars).
View 1 Replies View RelatedMotorola SB6121 Recurring Loss Of Cable Signal Every Day For Five Months
Aug 18, 2012My Motorola SB6121 DOCSIS 3 modem is connected to a Medialink n-band router. Sometime in the morning (usually between 7am and 9am, the router loses the ability to see the modem. I can access the router's control panel, and I see 0.0.0.0 for WAN IP, Subnet Mask, and Gateway. Primary and Secondary DNS server are both blank. Connection Mode is Dynamic IP.I lose the ability to access the modem's control panel directly (192.168.100.1), even though the PC I use is hardwired to the router. So, I unplug the modem, unplug the router, wait, plug in the modem, plug in the router, and everything works again.I've had more than twelve service calls. Every Charter tech looks at the line, puts in boosters, takes out boosters, replaces splitters, and seems to only look at signal. I've BEGGED Charter to let me speak to an engineer, because my suspicion is that it's something to do with the DHCP server.
I did, by the way, replace EVERYTHING.I have had 5 different modems...same problem. I have had 5 different routers...same problem, including a modem/router combo.I've tried different brands, too.I've disconnected all wifi devices from the router, and rebuilt my PC's operating system. I've even unplugged the refrigerator, because one Charter tech claimed it was "upstream noise."I've been online only a few times when the system actually goes down. What I notice in the router logs is this: [code] So at 9:34, no ranging response - T3 timeout, followed by Unicast Ranging Received Abort Response;
then the Cable Modem Reboot due to T4 timeout, and the system time goes to 1/1/1970 at midnight. No ToD.
The last piece of information: Charter installed a second modem as a "test." That was originally in the same room. A month ago they did another line from the box directly to the test modem to skip the splitter on the house.That modem shows the same problems, EXCEPT -- not perfectly in sync. I might see the same error, but the time will be a few minutes and seconds off. And sometimes I'll see the errors, but the modem won't go down.Sometimes the first modem goes down, sometimes the second. I'm accustomed to a router "healing" itself when the modem goes down.It might be off for a bit, but then will re-establish. This Medialink doesn't do that. It forces a physical restart every day. There are other outages too, and all I get from Charter is "the signal strength is good."
Linksys Cable / DSL :: WAG320N Very Poor Wireless Signal On 5GHz?
Nov 29, 2010I live in a block of flats I decided to buy a proper router on 5GHz. I can see at least 12 wireless networks and all of them on 2.4GHz(mostly BT HomeHubs or other UK ISP wireless boxes). I study CCNA and our teachers recommend cisco routers(linksys) as the best ones. I bought a WAG320N as the best one I could find in the UK market for a fair price. The problem is, that I have less signal on 5GHz than on 2.4GHz. I have maximum 50% of signal on 5GHz and speed is usually below 802.11g, means below 64Mbps! I can't believe it. When I change it to 2.4GHz the signal has up to 80% like my old router TP-Link. The speed is mostly up to 65Mbps, means terrible. I have seen lots of topics about this particular router but I couldn't believe that Cisco sell such awful and unreliable products like this router. I have tried to change the channels on 5 and 2.4GHz but it's always the same, poor speed and low signal. My wireless card is Intel WifiLink 6200 Advanced -N and operating systems Windows 7 and Sabayon linux. I have a laptop and it is cca 6 metres from the router and there are 2 walls. The router is still under warranty so I won't hesitate to return it back to PCWorld.
View 9 Replies View RelatedLinksys Cable / DSL :: WAG200G No More Wireless Signal After Firmware Update?
Feb 26, 2011i did recently bought that new router to equip my house, also did a new firmware update to latest version 1.01.09 found on official website.
sadly it did kill my wireless network....
how to downgrade? im hardly looking on the internet for older version but cant find any..
Linksys Cable / DSL :: WAG120N Not Receiving Any Signal From Wireless And Wired
Sep 14, 2011i have purchased WAG120N exactly one year back. Now I am facing a issue with modem.Power button is blinking and stabilizing after 5 minutes, but internet and wireless are not led's are not on and not receiving any signal from wireless and wired.I have called Linksys, they are not giving any support and saying one year warranty period is over.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160 Windows Detects Modem / No Signal At All
May 26, 2011 I cannot get wireless collection to work up stairs with the WUS600N Adaptor at all,and with the modem 20 feet from from my laptop downstairs i am only getting 3 BAR SIGNAL STRENTH.Just had Replacement WAG160N ALEX A V2 as my other one died ,(did not have a problem with the one sent back for replacement) Have the latest firmware 00.20 installed model serial No is SSH10JA11079.WUS600N V1 latest drivers for windows 7 .03.10.Windows detects the modem ok, but there is no signal at all up stairs and with the modem downstairs even the wireless on the laptop (15 feet from the modem) is only 3 bar signal strength ,did have this problem with the one I sent back. I have gone through all the wireless channels setup in the set up page with customer support (5 hours!)
View 2 Replies View Related