Cat5 From Computer Receiving Wireless Signal?

Jul 18, 2011

I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?

View 8 Replies


Linksys Cable / DSL :: WAG120N Not Receiving Any Signal From Wireless And Wired

Sep 14, 2011

i have purchased WAG120N exactly one year back. Now I am facing a issue with modem.Power button is blinking and stabilizing after 5 minutes, but internet and wireless are not led's are not on and not receiving any signal from wireless and wired.I have called Linksys, they are not giving any support and saying one year warranty period is over.

View 1 Replies View Related

Protocols / Routing :: Use Cat5 Without Reducing The Signal Strength

Oct 17, 2011

how long can i use cat5 without reducing the signal strength

View 1 Replies View Related

Cabling / Cards :: Slingbox PRO Not Receiving Ethernet Signal

Oct 8, 2011

They have a main Verizon router in their bedroom, which is hard wired to a wireless router in the TV room. The have another cable router (not wireless) and it can receive a signal when you plug an Ethernet cable from output #1 on the wireless router to Internet input on the cable router (the Internet light lights up, meaning it's receiving the signal). Also the wireless router light for output #1 lights up (meaning it's outputting a signal correctly). But, when I plug the same cord into the Slingbox PRO, the network light, on the Slingbox PRO, doesn't light up, nor does the #1 light on the wireless router. The Slingbox is out of warranty.

View 19 Replies View Related

Routers / Switches :: Computer Is Sending Packets But Not Receiving?

Mar 8, 2011

Few systems on my LAN stops recieving packets but sending, this happened after i changed my switch, i run xp professional. i have tested cables, NICs,etc.

View 1 Replies View Related

Computer Cannot Detect Wireless Signal?

Jul 3, 2012

wireless works on other household computer, but not the Sony Vaio

View 1 Replies View Related

Re-connect Home Wireless Signal To Computer?

Apr 9, 2012

how to re-connect my home wireless signal to my computer. The wireless signal is strong and the other computers in my house will connect with no issues. My computer connected with no problems to my wireless signal at work. I am running Windows 7 Home Premium on a Lenovo Idea Pad Win7 PC. The computer was connecting yesterday and then was shut down. The next time I got on, ,it wouldn't connect. I've tried re-establishing the network as a new network, but it says the network already exists. The profile is the same as our other computers and nothing has been changed there. When I disconnect from the wireless signal and ask to re-connect it says that the it is trying to connect, but can't make the connection. I'm looking for any way to re-build the profile so it will connect and work again.

View 9 Replies View Related

Converting Wireless Signal To Wired With Computer?

Jan 18, 2011

My desktop computer doesn't have a wireless card in it. i also have a laptop which does have a wireless card. I was wondering if there is a way i can take the wireless connection and re-transmit it to the desktop through ethernet. I have a 5-port switch. I don't really know much about networking. but i am knowledgeable in computers. laptop has windows 7 on it. i really would prefer to not buy a wireless card for the desktop.

View 2 Replies View Related

Wireless Signal Is Detected But Computer Doesn't Connect

Apr 6, 2011

I have a an HP Pavilion dv6000t notebook running Windows Vista.I have a wireless router at home and connect to the wireless signal using both this computer and my other computer that I use for work. Yesterday, out of the blue, my laptop stopped connecting to my home wireless signal.It detects the signal, but when I click on it to connect (something I shouldn't have to do, as it is configured to connect automatically), I get a message saying that it couldn't connect and suggests that the signal strength is low.I know that the signal strength is fine as I am connected just fine on my work computer.I can plug my laptop into the router using a cable and it connects just fine that way, so the only problem is with the wireless signal. I have restarted the computer, modem, and router, to no avail.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - See Signal But Can't Connect With Computer Or Iphones?

Oct 17, 2011

I am having problems connecting to my wireless internet.  We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect.  We tried resetting everything, turned on and off several times.  Went to the linksys wireless set up page, changed SSID and password.  Still can't connect with the computer or our iphones.  It shows our SSID is there but won't connect.  My internet when plug directly to the computer works fine (I am using it now).  My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Get No Signal / Internet Connection On Computer

May 14, 2013

Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8

I get this new router TL-WR841N from, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of from ATT.Is my router deficit ?

View 2 Replies View Related

Tv Has No Signal When Connected A Vga Cable To The Computer?

Aug 31, 2012

The only thing hat worked for me was to update the vga driver. Restart the computer and ready to watch everything you want in your tv.

View 1 Replies View Related

Run The Cat5 To A Linksys Router And Use Wireless It Fails?

Mar 4, 2012

When I vacation in Florida my neigbour across the street gives me her wep key so I can use her internet. I have to sit by the window in order to get a signal. I purchased the range extender and set it up with her ssid and wep key I ran cat5 from that into the house. If i use the cat5 on a laptop it works fine. When I run the cat5 to a linksys router and use wireless it fails I can connet to the wirless router but no internet.

View 1 Replies View Related

Computer Loses Signal Unless Very Close To Router?

Sep 28, 2011

About a week ago my laptop started acting strange. I noticed when I brought my computer to my room (which is where i usually use my computer) it said that there were connections available where the signal bar is. Which is odd because it usually just auto connects. So i clicked on the signal bar and connected to my internet, but it lost the connection shortly after so I clicked connect again and it said windows was unable to connect to the router. Then shortly after that it said no connections were available. So i brought the computer to the computer to the family room ,where the router is, to check the router. It was nothing wrong with the router so I looked back at the computer and it was automatically connected to the internet with a five bar connection, but when i left the family room with the computer it immediately lost the signal. So i decided i should just stay in the family room. The next day the same problem occured and i went back to the family room to use the computer but i noticed the connection wasnt usually at five bars like it usually is wen im that close to the router but it was 4 bars or 3.

The next day i went over my fathers house for the weekend, and when im over there i pretty much always have a five bar connection even though im not in the same room as the router because im 1 floor directly above the router. Now when i used the computer over my dads house it had a 3 bar connection, disconnected from the internet at times, and when i try to connect bak it said that windows could not connect to router like it had said in my room bak at my own house, even though it always used to have a very high connection before this problem happened. So wen i got bak to my house i went to the family room to connect to the internet and now im having the same problems i had over my dads house. Now i try deleting some programs to see if they affected the internet and have even turned off some start off services on using mpconfig but that didnt work either

View 11 Replies View Related

Computer Cannot Get Signal - Network Security Key Required?

Nov 14, 2011

I have Clear service but there is one area that I cannot get a signal and need the network security key. I have windows 7, where do I find this security key?

View 2 Replies View Related

Connecting Modem With Cat5 Cable To Wireless Router?

May 23, 2012

Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.

View 1 Replies View Related

D-Link DIR-655 :: Showing Xbox Wireless When Connected By Cat5?

Dec 16, 2012

I have tried all firmware and go into router settings and it shows it's sending a wireless signal to Xbox.  I have it connected via Cat5 cable.   

View 5 Replies View Related

Computer Forces Modem To Lose DSL Signal Repeatedly

Jun 24, 2012

So i have AT&T dsl internet. but whenever i connect my computer wirelessly to the modem and get on the internet it repeatedly loses dsl connection every some odd minutes. the dsl light on my modem turns off, then blinks red, then fixes itself for five or so minutes until the cycle restarts. ive tried 2 wireless usb adapter and 1 internal wireless card. none have worked at all. but if its wired with an ethernet cord it works fine. we also have 2 other laptops that connect wirelessly and work fine. i dont understand what would cause this solely on my computer. ive also had AT&T come to my house and look at it and they said its fine, the issue is somewhere in my computer messing with the modem.

View 1 Replies View Related

Change Network Icon From A Computer To Signal Bars?

Oct 13, 2012

change the network icon to the icon that shous the list of networks available with the strength bars

View 1 Replies View Related

Security Camera System - Convert Cat5 Ethernet To Wireless?

Aug 21, 2011

I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.

Is there a device that I can use to get rid of the Cat5 cable in this scenario?

View 2 Replies View Related

Terminating Cat5 With RJ-11

Apr 8, 2013

The reason I want to do this is to connect a DSL modem. I'm moving all my networking equipment to my utility room where all the cables come in to the house. All of the phone jacks are wired using Cat5. So, I want to take one of those Cat5 cables and terminate it with an RJ-11 so the modem can dial out.

View 15 Replies View Related

Cisco Wireless :: 5508 - Client Not Receiving The IP?

Apr 12, 2011

I have two number of WLC model 5508 running IOS version And One WLC in DMZ with the same model and IOS version. AP model is 1141. The Two WLCs are integrated with ACS. I have a SSID named EMployee. The DHCP for the users are configured in a seperate DHCP server and i have mapped this DHCP server IP to the interaface Employee.And this interface is mapped to the SSID as well..  But my client is not receiving the DHCP IP. Attached are the debug logs from the client.

View 9 Replies View Related

Installing Fiber Instead Of Cat5?

Jul 31, 2011

I have a question relating to installing lines underground in a conduit.

We've had several lines get hit by lighting which leads to the line being bad, equipment being damaged and so on. We've then installed a new cat6e cable WITH lightning arrestors which were blown almost instantly on the first storm. This is obviously a bad ground issue, and a risk to the equipment.

This being said, I would like very much to run fiber optic cable in this conduit and then convert it to ethernet, but I don't know if fiber is susceptible to lighting like ethernet cable is, OR if there are other methods to prevent this freak of nature crap!

View 7 Replies View Related

DI-624 Router With 1 Cat5 Cable?

Jun 24, 2012

How do I set-up my IBM computer to a D-Link DI-624 router with only one Cat 5 connection on back of computer.

View 1 Replies View Related

Hooking Up DSL Through CAT5 In The Wall?

Nov 15, 2011

I have CAT5 cables run throughout my house to a few different jacks. They plug into my modem downstairs. I want to hook up my desktop internet through one of the wall jacks upstairs. The wall jack has CAT5 cable run to it but only accepts telephone wire sized jacks. How do I connect to the internet with this setup?

View 14 Replies View Related

Configuring CAT5 With Vonage

Nov 17, 2012

I have a new house in which I have installed my cable modem and router in my storage room basement. The (4) phone jacks in the house are wired with CAT5 that runs down to my storage room. I would like to use Vonage and keep it in my storage room with the rest of my network. How would I configure Vonage with what I have described?

View 5 Replies View Related

Aspire 5315 - Wireless Is Sending But Not Receiving Packets?

Jan 10, 2012

i have an acer aspire 5315 and im running windows vista home basic, My wireless has had no issues at all until i came to oklahoma yesterday and my internet will not connect to my dads wireless, but at my moms it had no issue, and at the airport i connected to there wifi with no issues also, is there some kind of setting that gets changed when you connect to the internet in the airports that wouldnt allow you to get on your internet at home?

View 19 Replies View Related

Gateway Laptop To Stop Receiving Wireless Signals?

May 18, 2012

My Gateway laptop has stopped sensing wireless signal. It was working just fine a few hours ago, then after I pulled it out of hibernate it stopped sensing the signal. I have switched the button off and on at least 3 times, tried restarting and turning off and starting. Have also tried the Fn-F2 a number of times but still no luck.

View 3 Replies View Related

No Internet Access Via Cat5 Cable Wireless Or Internet Dongle?

Aug 24, 2012

I have a Sony Vaio running Windows 7 Home Premium. Yesterday I accessed the Internet at the office over a Cat5 cable. Last night I accessed the Internet at home via my USB Internet dongle (actually an O2 mobile phone). Today neither works. I have also tried to connect to the Internet via Wireless and that does not work either.Needless to say my desktop (using the same Cat5 cable) works. My mobile phone can access the Internet on it own. And others can get the wireless to work.My Vaio can connect to all three; however, all three say "No Internet access".I changed nothing between last night and this morning. I have scanned through the list of Windows Updates and nothing has been downloaded in the past week. I have turned off my firewalls (in both McAfee and Symantec Endpoint Protection). I have run the three NETSH reset commands with Administrator privileges. I have rebooted my machine numerous times. Nothing works.

View 4 Replies View Related

Which Cable Is Good For Outdoor Use Cat5 Or 6

Jul 29, 2011

I am installing 60 meters of overhead telephone cables between two buildings. which is better cat5 or cat 6 in terms of durability?

View 3 Replies View Related

Wiring Cat5 To Phone Lines?

Jan 31, 2013

I was recently tasked at work to reinstall phone lines after a remodel. We have 2 phone lines with two phones and a credit card machine. I ran into a piece of equipment and I have no idea what it is so my research into the subject has been halted.

View 1 Replies View Related

Determining Length Used Of Cat5 Cable?

Sep 29, 2012

I am installing a network in my small business and was given a spool of Cat5 cable to run wires... I know the length in feet of cable that I was given, but I was wondering if there is some kind of markers on the cable to tell me how much is left... I will be charged for it by foot after I'm done, and I want to know how much I've used. Do I have to just use a measuring tape? Seems unnecessarily complicated... I've checked the wire but can't see any marker of the length remaining.

View 1 Replies View Related

Wireless Internet Drops When Receiving Or Making Phone Call?

Apr 6, 2011

I have an Orange Livebox connected wirelessly to my laptop. Everything's been working fine until the last few weeks. Whenever I receive or make a call using my iDECT s2i cordless telephone the internet drops and it takes ages to reconnect. I've checked all the connections and every phone socket has an ADSL filter. I understand that some wireless devices can affect a router and that these are usually 2.4ghz devices but I have no idea if my cordless telephones are 2.4ghz or 5.8ghz or indeed if this is the source of the problem at all.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved